Construction Of Cement Concrete Road And Widening And Strengthening Of Single Road At Ind Area Sangaria Ph-Ii
Tender Value
53.90 Lakhs
Estimated cost
Bid Submission
26 Apr 2022
0 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sangaria → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cement Concrete Road And Widening And Strengthening Of Single Road At Ind Area Sangaria Ph-Ii
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, scaking serviceable and unserviceable materials separately as per MoRTH specification claue : 202, By Mechanical Means, Bituminous courses |
| 2 | Earth work in excavation including stacking/disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth (MoRTH specification Clause 301 to 305)., In ordInary soil, mechanically by power shovel including mechanical loading and carriage upto 1 km by tipper/dumper |
| 3 | Providing laying spreading and compacting specified graded sand, gravel (crushed graded stone material ) as per Table 400-1, 400-2 or any other coarse material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete. [MoRTH specification : Clause 401]. By mechanical means with all lead, For Grading V Material |
| 4 | Providing, laying, spreading and compacting crushed graded stone aggregate of as per table 400-12 and 400-13 to Wet Mix Macadam specification including premixing the material with water to OMC in mechnical mixer as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/ paver finisher in sub base/ base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintance of diversion etc. (MoRTH specification : Clause 406 & 112) by mechanical means with all leads from plant to site. |
| 5 | Providing and applying primer coat over prepared surface or granular base with bitumen emulsion (SS-1) as per IS: 8887 & manufacturer’s specifications @ 6 kg /10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures including cleaning of road surface as per MoRTH specification CIause 502 & 112 |
| 6 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-10 and design mix for base/binder course including loading of material with F.E loader, heating of binder (including cost of antistripping compound wherever required) aggregate and filler in hot mix plant 40-60 TPH transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade, rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 505 & 112] with all leads, For grading-2 (layer thickness 50-75mm) using 26.5mm maximum Nominal size aggregate as per Table 500-10 and minimum 4.50% bitumen by wt. of mix, using bitumen grade VG-30 |
| 7 | Providing and applying tack coat with bitumen emulsion (RS-1) on the prepared surface including cleaning as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification CI.503 & 112 |
| 8 | Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-17 for wearing course including loading of aggregate with F.E loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and cement filler as per Cl. 505.2.4 with aggregates in hot mix plant 40-60 TPH Transporting the mix material with tipper to paver and laying with sensor paver finisher (as per clause 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 MPa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification : Clause -507 & 112) with all leads, Grading II (13.20 mm nominal size) - Bitumen @ minimum 5.40% of mix & compacted thickness 30 - 40 mm, using bitumen grade VG-30 |
AI Tender Summary
Tender Timeline
Apr 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender