Construction Of Pin Toilet -6 Nagar Palika Parishad Kanya Inter College Me Pink Toilet Ka Nirman
Tender Value
13.44 Lakhs
Estimated cost
Bid Submission
23 Apr 2022
0 days left
EMD
27000
Bank guarantee accepted
Document Fee
1652
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mauranipur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pin Toilet -6 Nagar Palika Parishad Kanya Inter College Me Pink Toilet Ka Nirman
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetations grass, bush, wood trees and saplings of grith upto 30 cm. Measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres outside the periphery of area cleared. SI. No. 259 |
| 2 | Excavation in foundation in ordinary soil(Loam clay or sand).including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. S.I no - 251 |
| 3 | Cement concrete with 4cmgauge approved stone ballast, approved coarse sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.PCC SI No.281 |
| 4 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Plinth Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. s.i no- 286-1st |
| 5 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. SI. No. 283 (1) |
| 6 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab and shelf, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. SI. No. 284 (I) |
| 7 | Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.SI. No. 504 |
| 8 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (Si. N0. 303) |
| 9 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in super structure including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 303+309+310 |
| 10 | Class-150 brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortar in super structure including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 305+309+310A |
| 11 | Supply of (40x40x5) MS angle iron door, frame made of approved MS angle iron wrought to required from including drilling holes, welding and riveting where necessary and also including supply of all material, such as steel hinges of required size, nut and bolts etc and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.New Item 2 of Mild Steel and Iron Work page no -36 pressed steel chowkhat for outer door SI. No. New Item-2 Page No. 42 |
| 12 | Supply of approved Z section windows and ventilators excluding cost of glass panes but including supply of all materials, its fabrication nut and bolt, hold fast required labour and tools and plants for proper completion of work as per direction of Engineer-in-charge and also including cost of handles, stays etc and one coat of red oxide paint complete in all respect at site of work. SI. No. New Item Ist Page No. 41 |
| 13 | Supply of approved MS windows and M.S grill and ventilators excluding cost of glass panes but including supply of all materials, its fabrication nut and bolt, hold fast required labour and tools and plants for proper completion of work as per direction of Engineer-in-charge and also including cost of handles, stays etc and one coat of red oxide paint complete in all respect at site of work.SI. No. New Item-3 Page No.42 |
| 14 | Earth work cutting/ filling in plinth in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20\") in depth and earthwork in embankment to be in 20 cm(8\") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5fts) lifts and 30 m. (100\") lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in-charge. SI. No. 253 |
| 15 | 12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.58(III) |
| 16 | 15 mm thick plaster on rough side brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.59(III) |
| 17 | 2.5 cm (1\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 cm (3/4\") graded approved stone laid in panels finished with 3 mm (1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm (3\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and stone ballast 4 cm. (1½\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 281 |
| 18 | S/F of 5mm thick china white glazed tiles in flooring or in skirting dado in 1:3 cement and coarse sand finished with 3mm floating coat of neat cement including supply of all materials, labour and T&P etc required for proper completion of the work.pg-49 si-628 |
| 19 | Kota stone slab 20 mm thick in flooring steps skirting & dado complete of the work |
| 20 | Providing & Laying of 8 to 10 mm thick Ivory or light shade Vitrified tiles of 600 mm x 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete l/c supply of all materials, labour T & P required for proper completion of work. Page No. 50 si no-new iteam-2 |
| 21 | 25 mm cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 graded stone aggregate of size 12.5mm and above) by laid over base concrete finished with floating coat of neat cement ( base concrete to be paid separetely) including fixing of glass strips.(Excluding cost of glass strips) Page-49 Si no-14.69 |
| 22 | Fixing panes of 4 mm thick glass with and including Atul or equivalent ISI mark quality putty and brads and spring and including supply of all materials labour and tools & plants, etc. required for proper completion of the work but excluding cost of glass.SI No.812(b) |
| 23 | One priming coat and two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of work.SI No.649+650 |
| 24 | Finishing wall surface with approved make and quality birla white putty including supply of all material T&P etc required for proper completion of the work |
| 25 | Painting or varnishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950.SI No. 641+642 |
| 26 | Finishing walls with water proofing cement paint of approved make and quality on new work with two coat to give to give an even shade. Including supply of all material, labour and T&P etc. required for proper completion of the work. Page No. 46/SI. No. 660+661 |
| 27 | P/F of Submersible pump I/C supply of approved quality Motor of 2 HP I.S.I mark and boaring Casing Dia of 125 mm with Starter panel, cable and necessarily all fittings comp with labour T&P etc required for proper completion of work as per direction of Engineer E/I . |
| 28 | Supply and fixing the green PVC sheet in courtyard with fixing of angle frame including supply of materials T&p etc complete. |
| 29 | Supply and fixing the Steel railling in the rampwith fixing of hold fast including supply of materials T&p etc complete. |
| 30 | Add 5% for internal electrification |
| 31 | Add 5% for internal Water supply |
| 32 | Add GST @ 12% |
AI Tender Summary
Tender Timeline
Apr 16, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender