|
| 1 | Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading ofincorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. |
| 2 | Dismanting of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 3 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc |
| 4 | Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 5 | M&L for non skid ceramic colour tiles, 7 to 8 mm thick, area of each tiles exc 0.06sqmbut not exc 0.11 sqm squre / rectangular in floor set and jointed in neat cement slurryand pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layerin cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed. |
| 6 | M&L for vitrified ceramic tiles 10 mm thicksqure / rectangular area of each tiles not excedding 0.36 sqm in floor set and jointed in neat cement slurryand pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layerin cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed. |
| 7 | M & L for 300 x 200 x 7mm thick coloured glazed ceramictiles as in vertical surfaces such as dados / skirting etc. set and jointed in neat cement slurry and pointed in white cement over 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 9 | Taking up or down steel tubing and connections, 15mm bore and removal of unserviceable pipe from site of work complete all directed. |
| 10 | Taking up or down steel tubing and connections, 20mm bore and removal of unserviceable pipe from site of work complete all directed. |
| 11 | Dismantling of wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets and removing unserviceable materials from site of work complete all as specified and directed. |
| 12 | Taking down chowkats orframe with shutters (without taking off shutters from the frame)of area not exceeding1.50 Sqm each complete all as specified and as directed. |
| 13 | Allas per item No 06 here-in-before butarea exceeding 1.50 Sqmbut not exceeding 4 Sqm. each complete all as directed. |
| 14 | Taking down shutter of any description not exceeding 1sqm each and removing to stores or from site of work complete all as specified and as directed. |
| 15 | Taking down shutter of any descriptionexceeding 1 sqm but not exceeding 2 sqm eachand removing to stores or from site of work complete all as specified and as directed. |
| 16 | Dismantling of old decayed timber scantling 40 Sqcm and over in section in any position in unframed work and removing materials from site of work complete all as directed |
| 17 | Dismantling of old damaged timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in unframed work of any description and removing unserviceable materials from site of work complete all as specified and directed. |
| 18 | Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required |
| 19 | S&F18-20mm thick granite of any type work table rubbed and polished in steps, jambs,pillars,cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of cement mortar (1:6) after taking down old slab complete all as directed. |
| 20 | S&F 1st class soft wood Small fittings suchas brackets of any type, latch and hinge blocks,shaped door and window stops and the like, including all necessary\"labours;articles n exc 200 cu. cm each |
| 21 | S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 22 | S&F 30 mm thick flush shutters , solid core construction , with Block boards coreand plywood face panels , commercials type on both side complete all as specified and as directed. |
| 23 | S&F 35mm thick 2nd class hardwood glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or roundedfitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. |
| 24 | S&F 30mm thick 2nd class hard woodglazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divided into squares (with sash bar), edges of plain, chamfered or roundedfitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. |
| 25 | S&F Anodised aluminium frame powder coating ( Minimum thickness of powder coating 50 micron) for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 26 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 27 | S&F powder coating ( Minimum thickness of powder coating 50 micron)Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified |
| 28 | S & F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as directed. |
| 29 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specifications and drawings in Section 8 of SSR Part-II. |
| 30 | M & L for second class hard wood in scantling clean Sawn and fixed complete all as specified and as directed. |
| 31 | S & F second class hard wood plain fillets square,rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq.cm but not exceeding 13 Sq.cm complete all as specified and as directed. |
| 32 | S & F second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with nails, cross sectional area exceeding 13Sq.cm but not exceeding 25 Sq.cm complete all as specified and as directed. |
| 33 | M & L 4 mm thick asbestos Cement Plain building boards, fixed to timber frame work with screws in ceilings complete all as specified and as directed. |
| 34 | S&F 12 mm thickParticle board for insulation purposes, fixed with nails to timber framework |
| 35 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm |
| 36 | S&F Butt hinges 75mm size, medium weight, cold rolled mild steel. |
| 37 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel. |
| 38 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. |
| 39 | S&F Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 75mm size |
| 40 | S&F Aluminium handles 100mm size, cast type, anodised |
| 41 | S&F Aluminium handles 125mm size, cast type, anodised |
| 42 | S&F Aluminium handles 150mm size, cast type, anodised |
| 43 | S&F Mild steel barrel tower blots 100mm long, stove enamelled black, with bright bolt. |
| 44 | S&F Mild steel barrel tower blots 125mm long, stove enamelled black, with bright bolt. |
| 45 | S&F Mild steel barrel tower blots 150mm long, stove enamelled black, with bright bolt. |
| 46 | S&F Mild steel barrel tower blots 200mm long, stove enamelled black, with bright bolt. |
| 47 | S&F in repairs Brass chromium plated brackets |
| 48 | S&F Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. |
| 49 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples |
| 50 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. |
| 51 | S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete |
| 52 | Supply and fix 15mm bore galvanized steel tubing \"medium grade\"with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed. |
| 53 | Supply and fix 20mm bore galvanized steel tubing \"medium grade\"with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed. |
| 54 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed. |
| 55 | Supply and fixed in repair 15mm borechromium plated bib taps, cast copper alloy, screwed down, with crutch or butterfly handle, screwed for steel pipe or brass ferrule complete all as specified and directed. |
| 56 | Supply and fixed in repair 15mm bore chromium plated stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe for unions complete all as specified and directed. |
| 57 | Supply and fixed in repair 15mm bore stop valves, chromium plated, with Long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with capstan head, screwed for steel pipe or brass ferrule complete all as specified and directed. |
| 58 | S&F in repairs plastic water closet seat cover, white / black, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 59 | Supply and fixed in repair mild steel chromium plated aluminium anodized tubular curtain rails, 19mm dia, with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 60 | S&F in repair 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete all as specified and as directed. |
| 61 | S&F in repair ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed 20 mm bore dia of pipecomplete all as specified and as directed. |
| 62 | S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and as directed. |
| 63 | Dismantling of wall and ceiling boards (Fibre/Pulp/Plywood) any thickness including cover fillets |
| 64 | S & F anodised GI snap grid (Size of grid 605mmx605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing all as specified |
| 65 | S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board)fixed in aluminium snap grid frame work with screws. |
| 66 | M&L 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws |
| 67 | M&L for 6 mm thick Cover fillets of standard hard board, 40mm wide, and fixing with screws |
| 68 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing |
| 69 | 25 mm lnsulated PVC Wall Lining consisting of PVC Insulated Panelswith Single Side Prelam PVC sheet used in-stead of plain colour sheet duly fitted into the wall as per specifications and drawing |
| 70 | All as per Item no. 08118 but PVC Insulated Panel with Single Side Prelam PVC sheet used in-stead of plain colour sheet |
| 71 | Supply and fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed. |
| 72 | S&F in repairvitreous chainasquating pan orissa pattern size 580X 440mmwhite with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed. |
| 73 | S&F in repair 10 ltr capacity PVC valveless syphone action type, flushing cistern low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed. |
| 74 | S&F in repair vitreous chaina wash hand basin 550X 400mm(flat ball type) any size including cutting for and pinning in ends of brackets and fixing of supply and waste water pipe complete all as specified and directed. |
| 75 | S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 76 | S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 77 | S & F for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed. |
| 78 | S&F 15 mm size PVC connection pipewith PTMT nuts of length 600 mm complete all as specified and directed. |
| 79 | S&F Soap dish, Vitreous China white, approximate size 160x160x90mm |
| 80 | S&F in repair chromium platedtowel rail 600mm long complete all as specified and directed. |
| 81 | M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 82 | M & L for PVC (SWR) multi Floor trap of 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed. |
| 83 | M & L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 84 | S&F UPVC soil or waste pipe 110 mm bore single socket in any length type \"B\" with rubber ring joints laid in trenches orfloor / wall complete all as specified and directed. |
| 85 | All as per serial item No 61 above but 75 mm bore completeall as directed. |
| 86 | S&F UPVC (SWR)bend in any radius110 mmdia. complete all as specified and directed. |
| 87 | All as per serial item No 63 above but 75 mm dia completeall as directed. |
| 88 | S&F UPVCpipes 50 mm bore fixed to walls, floors,ceiling etc. complete all as specified and directed. |
| 89 | S&F 100 mm sizebutt hinges \"medium weight\" cold rolled mild steel complete all as specified and directed. |
| 90 | S&F 75 mm long butt hinges, \"medium weight\" cold rolled mild steel complete all as specified and directed. |
| 91 | S&F 50 mm long butt hinges, medium weight, and cold rolled mild steel complete all as specified and directed. |
| 92 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 93 | All as per serial item No 69 above but 150 mm long completeall as directed. |
| 94 | S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 95 | All as per serial item No 71 above but 100 mm long completeall as directed. |
| 96 | S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 97 | S & F stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc complete all as specified and directed. |
| 98 | All as per serial item No 74 above but in repair completeall as directed. |
| 99 | S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 100 | S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 101 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed. |
| 102 | S&F 3.0 mm thick figuredglass,pin head type glazing with oil putty in squares not exc. 0.50sqm in each panecomplete all as specified and as directed. |
| 103 | S&F Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones |
| 104 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 105 | M&Lfor5mm thickrendering in cement mortar (1:3) on concrete surfaces, in ceiling,and finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 106 | M & L for rendering 15 mm thick on fair face of brick wall or concrete surfacein cement mortar1:4 mixed with WPC @ 3% (or as per manufaturers instruction) finished even and smooth without using extra cement, complete all as specified and as direted. (Note : WPC shall be measured and paid separately) |
| 107 | M & L for applying three coatsof white washing to new plastered wall surfaces inluding preparation of surfacescomplete all as specified |
| 108 | M & L for applying two coatsof white washing to new plastered ceiling surfaces inluding preparation of surfacescomplete all as specified |
| 109 | M&L for applying one coat of white washing after preparation of old decorated plastered or unplastered surfaces of wallcomplete all as specified and as directed |
| 110 | All as per serial item No 86 above but as on ceiling complete all as directed. |
| 111 | M&L for preparation of old distempered surfaces of wall includingcornices, pilasters and other wall features etc by washing, rubbing down and stopping and applying one coat of acrylic washable destemper on the same complete all as specified and as directed. |
| 112 | M&L for preparation of old painted surfaces of walls including cornices, pilasters and other wall features etc by washing, rubbing down and stopping and applying one coat of exterior grade weather coat paint complete all as specified and as directed |
| 113 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 114 | All as per serial item No 90 above but not exc 10 cm width or girth complete all as specified and directed. |
| 115 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described for and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 116 | All as per serial item No 92 above but not exc 10 cm width or girth complete all as specified and directed. |
| 117 | M&L for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 118 | Material and labour for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described nexc 10cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 119 | M&L forpreparation of new or previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 120 | M&L forpreparation of wood and wood based materials,new or old, of any description and girth, not otherwise described, and treated withtar or coal tar black paint complete all as specified and directed. |
| 121 | M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed. |
| 122 | Supply & fixed in repair 100mm sizemild steel butt hinges \"medium weight\" cold rolled complete all as directed. |
| 123 | Supply & fixed in repair 75mm sizemild steel butt hinges \"medium weight\" cold rolled complete all as directed. |
| 124 | Supply & fixed in repair 200 mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as directed. |
| 125 | Supply & fixed in repair 100 mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as directed. |
| 126 | Supply & fixed in repair 150 mm long mild steel pressed handles ovel type stove enamelled black complete all as directed. |
| 127 | Supply & fixed in repair 100 mm long mild steel pressed handles ovel type stove enamlled black complete all as directed. |
| 128 | Supply & fixed in repair mild steel 300 mm long sliding door bolt, plate type stove enemelled black, with bright bolt not less than 12 mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as directed. |
| 129 | Supply & fixed in repair 150 mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as directed. |
| 130 | Supply & fixed in repair 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as directed. |
| 131 | Supply & fixed in repair 150 mm long aluminium handles cast type, anodised complete all as directed. |
| 132 | Supply & fixed in repair 100 mm long aluminium handles, cast type, anodised complete all as directed. |
| 133 | S&F in repair looking mirror 600mm x 450mm of selected quality 5 to 6mm thick glass mounted with glass shelf assembly with CP railsfixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. Make : Prayag, Jaquar, Marc, Kohler, Cera |
| 134 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 135 | Pre-painted galvatume aluminium zinc coating GI based corrugater steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 136 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., complete all as specified and as directed. |
| 137 | Dismantling plain or corrugated AC sheeting , any, thicknessor similar pattern roof coverings. |
| 138 | Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed. |
| 139 | Demolition of brickwork any description and position built in cement mortar |
| 140 | Demolition of PCC in ground floors & pavings exc 15 cm thickness but above ground floors (unreinforced) |
| 141 | M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate |
| 142 | Material and labour for providing 100mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate as in pavings/path surfaces fair and even and spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green surface complete all as specfied and directed |
| 143 | Material and labour for providing 75mm thick cement concrete (1:3:6) type B1using 20mm graded aggregate as in plinth protection surfaces even and smooth without using extra cement all as specified and directed. |
| 144 | Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded exc 20mm but n exc 25mm,including refixing the same complete all as specified and as directed |
| 145 | Taking down steel gate/Shutters of any description exc 2 sq. m each |
| 146 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or CM(one side only measured in cases where both sides are plastered) |
| 147 | Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste |
| 148 | M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6) |
| 149 | M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6) |
| 150 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 151 | Providing & injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall & rodding etc. complete |
