Development Of Musical Garden At Ward No 14 In Burudgaon Road Sainagar Udyan
Tender Value
1.06 Crore
Estimated cost
Bid Submission
06 May 2022
0 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Of Musical Garden At Ward No 14 In Burudgaon Road Sainagar Udyan
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the buildingarea & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming,watering including shoring and stutting etc.complete. By manual means |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete.Spec. No. : Bd.A.2 Page No. 259 |
| 3 | Filling in plinth and floors with contractor\"s soil sand or murum in 15 cm to 20cm. layers including watering and compaction complete. (14/22) |
| 4 | Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting complete. |
| 5 | providing M-20 RCC cast insitu single rim bored pile of 300 mm dia.each of load capacity as per design and of specific dia. of pile and bulb as directed sunk to required depth through all strata except rock excluding provision of reinforcement including placing reversible drum type concrete. etc complete.(15/27) |
| 6 | Providing and laying in situ cement concrete M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing-out water manually formwork, compacting, covering complete with reversible drum type mixer with crushede sand.(25/58) |
| 7 | Providing and laying in situ cement concrete ofM 20grade of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, grillages, strips, foundations and footings of R.C.C. columns and steel stanchions including bailing-out water manually, formwork, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, curing and roughening the surface if special finish is to be provided (Excluding reinforcement, & structural steel) complete with reversible drum type mixer. with crushed sand (29/74) |
| 8 | Providing and casting in situ cement concrete of M-20grade of trap granite / quartzite / gneiss metal for R.C.C. column as per detailed designs and drawings or as directed including centering, formwork of steel, compaction, roughening if special finish is to be provided and curing ((Excluding reinforcement,)with reversible drum type mixer. with crushed sand (30/80) |
| 9 | Providing and casting in situ cement concrete M-20 ofgrade of trap granite / quartzite / gneiss metal for R.C.C. beamas per detailed designs and drawings or as directed including centering, formwork of steel, compaction, roughening if special finish is to be provided and curing ((Excluding reinforcement,)with reversible drum type mixer. with natural sand (31/84) |
| 10 | Providing and casting in situ cement concrete M-20 ofgrade of trap granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings or as directed including centering, formwork of steel, compaction, roughening if special finish is to be provided and curing ((Excluding reinforcement,)with reversible drum type mixer. with natural sand |
| 11 | Providing and casting in situ cement concrete of M-20 grade of trap granite / quartzite / gneiss metal for R.C.C. chhajja as per detailed designs and drawings or as directed including centering, formwork of steel, compaction, Roughening if special finish is to be provided and curing etc. Complete. (Excluding reinforcement.)with reversible drum type mixer.with crushed sand. |
| 12 | Providing and casting in situ cement concrete of M-20 grade of trap granite / quartzite / gneiss metal for R.C.C. pardi as per detailed designs and drawings or as directed including centering, formwork of steel, compaction, Roughening if special finish is to be provided and curing etc. Complete. (Excluding reinforcement.)with reversible drum type mixer.with crushed sand |
| 13 | Providing and casting in situ cement concrete of M-20 grade of trap metal for R.C.C. pile cap as per detailed designs and drawings or as directed including centering, formwork, compaction, finishing,curing etc. Complete. (Excluding reinforcement.)(42/124) |
| 14 | Providing and fixing in position TMT steelbar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, derwing and schedules including cutting, bending hooking the bars, binding with wires or tack welding and supporting as requried complete. (steel from other plant)(43/129) |
| 15 | Providing second class brunt Brick masonry with conventional / I.S. in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailing-out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete |
| 16 | Providing second class brunt Brick masonry with conventional / I.S. in cement mortar 1:6 in in superstructure including striking joints, raking out joints, watering and scaffolding complete |
| 17 | Providing cement based water proofing treatment to terrace (India waterproofing or alike) with brick bats coba n all position with an average thickness 112 mm consisting specialized material as per manufacture specification and covering 7 years gurentees on court fee stamp including all lead lift etc(53/163) |
| 18 | Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete |
| 19 | Providing sand faced plaster externally in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg.per cement bag, curing the same for not less than3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. |
| 20 | providing neeru finish to plasterd surface in all position including scaffolding and curing complete.(62/197) |
| 21 | Providing and laying vitrified morror /glosy finish decorative tye somany / rak/nitco/asian/make having size 590mmto 605 mm x590 mmto605 mmto I.S. 15622-2006 of approved make shade and pattern fpr floring in required position laid o bed of 1:4 cement mortar in required position including neat cement float, filling joints curing and polishing complet |
| 22 | Providing and fixing white glazed tiles 148.5 mm x 148.5 mm in size andabout5 to 6 mm thick for dado and skirting in required positions on plaster of 1:4 cement mortar (excluding all specials required like round edge tiles, corner tiles, angles, cups etc.) filling joints with white cement slurry, curing and cleaning complete. Spec.N |
| 23 | Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx,formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. |
| 24 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 25 | Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 26 | Providing and fixing solid core flush door in single leaf 30 mm thick as per detailed drawing approved face veneers on both faces with / without glazing and venetians in the positions shown on the drawing or as directed, all necessary beads, moulding and lipping, chromium plated fixtures and fastening on both sides and finishing with oil painting 3 coats complete |
| 27 | Providing and fixing in position of three track with rectangular pipe 63x38.1x1.22 mm at wt 0.650 kg/rmt with window frame bottom trak section 61.85x31.75x1.20 mm at wt 0.695 kg/rmt top and side setion 61.85x31.75x1.20 mm at wt 0.417 kg/ rmtthe shutter should be of bearing bottom 40x18x1.25 mm wtat 0.417 kg/rmt and handle section 52x18x1.13 mm at wt0.469 kg/rmt as per detailed drawing as directed by engineer in charge with all necessary aluminium section fixtures and fastening such as roller bearing in nylon casting and self locking catch fitted in vertical section with all screw and nuts etc complete. |
| 28 | Providing and fixing mild steel grill work weighing 15 kg/sqmfor windows, ventilators etc. as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. |
| 29 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, moulding edges, cleaning complete.a) Marble other than white makra |
| 30 | Providing and fixing 50mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 31 | Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge) |
| 32 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 33 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 34 | Providing and fixing screw down for 20 mm dia. Wheeled stop tap of brass including necessary sockets / union nut complete. |
| 35 | Providing and fixing screw down for 25 mm dia .wheeled stop tap of brass including necessary sockets/union nut complete. |
| 36 | Providing and fixing screw down for 50 mm dia.wheeled stoptap of brass including necessary sockets/ union nut complete. |
| 37 | Providing and fixing screw down for 80 mm.dia .wheeled stop tap of brass including necessary sockets/union nut complete |
| 38 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 39 | providing and fixing on wall/ceiling /floor 20 mm dia CPVC pipe with necessary fittings, remaking good the demolished portion etc complete(144/587) |
| 40 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 41 | Providing and fixing on walls/ceiling/floor 50mm dia.CPVC pipe with necessary fittings,remaking good the demolished portion etc. complete. |
| 42 | Providing and laying in walls/ceilings/floors 25mm dia.medium grade having embossedas ISI Mark galvanised iron pipes of 2.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenche sand with prime rofanti-corrosive oil paint,2 coats complete.Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 43 | Providing and laying in walls/ceilings/floors 50 mm dia.medium grade having embossedas ISI Mark galvanised iron pipes of 5.17 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenche sand with prime rofanti-corrosive oil paint,2 coats complete.Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in |
| 44 | Providing and laying in walls/ceilings/floors 100 mm dia.medium grade having embossedas ISI Mark galvanised iron pipes of 12.43 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenche sand with prime rofanti-corrosive oil paint,2 coats complete.Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 45 | royalty |
| 46 | Supplying & erectingFlexiable Cable of size 1 Sq.mm X 2 Core Copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe (For Solenoid Valves ) |
| 47 | Supplying & erectingFlexiable Cable of size 1 Sq.mm X 4 Core Copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe (For LED Light Fittings ) |
| 48 | Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 49 | Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 50 | Supplying & erecting flat flexible 3 core 10sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with coloum pipe assembly complete. |
| 51 | Supplying & erecting LED Light Fittings – 27W / 12 V. having following details The lighting system will include 27 W S.S body IP - 68 graded Submersible LED fitting each suitable for DC supply which will produce synchronized RGB color changing glowing pattern. These LED fittings will be nozzle mounted and or bracket mounted. All underwater lamps are entirely waterproof with rating IP 68. Body of lamp is made from stainless steel 304 gradedmaterial. It contains power LEDs and each LED is 12 Volts 3 Watt and they produce parent colors as red, green and blue with 10 degree spot angle. These Underwater Lamps have a silicon gasket fitment which acts as a damper for pressure changing. This creates perfect water anti-leakage isolation. Further Underwater Lamps have only one outlet cable connections. Connections are isolated in the lamp body to prevent water leakage from one lamp to the other lamp that are connected to each other. Lighting available in 27 W LED High performance, DMX controllable. Manufactured in Stainless Steel AISI-304, new slim design & are very strong. High heat dissipation due to the large contact area. |
| 52 | Supplying & erecting LED Light Fittings – 36W / 12 V. having following details The lighting system will include 36 W S.S body IP - 68 graded Submersible LED fitting each suitable for DC supply which will produce synchronized RGB color changing glowing pattern. These LED fittings will be nozzle mounted and or bracket mounted. All underwater lamps are entirely waterproof with rating IP 68. Body of lamp is made from stainless steel 304 gradedmaterial. It contains power LEDs and each LED is 12 Volts 3 Watt and they produce parent colors as red, green and blue with 10 degree spot angle. These Underwater Lamps have a silicon gasket fitment which acts as a damper for pressure changing. This creates perfect water anti-leakage isolation. Further Underwater Lamps have only one outlet cable connections. Connections are isolated in the lamp body to prevent water leakage from one lamp to the other lamp that are connected to each other. Lighting available in 36 W LED High performance, DMX controllable. Manufactured in Stainless Steel AISI-304, new slim design & are very strong. High heat dissipation due to the large contact area. |
| 53 | Supply & erection of Electric Panel and Electronic Control Unit having following details - All electrical components shall be housed in sheet metal enclosure which will be powder coat finished with provision for incoming and outgoing cable entry with internal wiring. Electric Panel contains electronic starters of pumps and lights, fuses, current spike cut off devices and manual control buttons for the pumps and lights. Computer sends signal to Electronic I/O Units and I/O units control the pumps, lights and motors. Electrical panel & Electrical control unit will include various number of Bus Bar, Contactors, Relays, MCBs, power Supplies,Frequency synchronize, indicator lamps,Fuses,Safety equipment Etc. |
| 54 | Supply & erection of Fountain Control Software : with following details Windows based fountain software controls our pumps, motors and lamps. Software sends control signals to Electronic I/O Control Units and I/O units convert this to the appropriate control signal for pumps, motors and lights. In the case of musical dancing fountains, software also sends music signal to sound amplifier in sync with the control signal. Our software is easy to use. User can select the music he wants and create a choreography by choosing how fountain animates with the music. User can use the built in audio analyzer to see the high points in the music and program accordingly or he can program just by listening the music. Software is designed with high precision control for perfect synchronization. |
| 55 | Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. |
| 56 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint in an approved manner with joints required. |
| 57 | A) Central High Rise Jet. Design no, 12022181 (A) provided.Create a strong statement with the white and frothy actity of the High Rise Jens. Its heavy, wind-resistant splay is highly visible during the day and a dramatic focal point at night when illuminating its dense. acrated pattern. |
| 58 | B) Inner Circle Fan Jets.Design no. 12022181 (B) provided.The water vel generated by these rozzles not only has a mesmerizing beauty, but it is also extremely practical. It is particularly well suited to conceal exposed technology Depending on the installation the fan nocles generate esthers vertically sending water veil, or a diagonally spouting water veil. Thanks to its birge surface du tribution, the attractive water pattern work independently of the water level |
| 59 | C) Outer Circle Design no. 12022181 (C&D) provided.These imple straight jets generate a clear, full get that is stable in wind. These nozzles are usually in a group to form different shapes. This feature makes it possible to generate interesting water patterns. |
| 60 | D)Outer Arch Straight Jets. Design no. 12022181 (C&D) provided.These imple straight jets generate a clear, full get that is stable in wind. These nozzles are usually in a group to form different shapes. This feature makes it possible to generate interesting water patterns. |
| 61 | E) Rotating Finger Jets.Design no. 12022181 (E) provided. Finger et produces a delicate arching spray pattem using precision clear stream jets. Combined with the muin swivel conacction permuts a wide range of spray patterns and angles. Due to the low note and splash reduced. Finger jets are ideal use in a murical fountain designed for close range viewing distance. Finger jet nozzles are water level independent and can be located in dry areas. |
| 62 | F) Rotating Jet Cluster.Design no. 12022181 (F) provided The Revolving Jet is divided into two parts the lower revolving mechanism with 4 arms which uses water pressure to resolve the nozzle and the upper part which consists of the nozzle and can be either a single Ceown nuzic/Vernical jet MF or a finger jer or 4 spinal arms, each type creating a different visual effect while revolving. |
| 63 | G) Diamond Jets.Design no. 12022181 (G) provided.Simple fountain ancile comprised of a set of 4mm water jets arranged in such a way that on rising they look like the diamonds and falling like the stars. The angel given to the jets means that, from wherever they are positioned. spectators can see the front & back jet cross over producing an enthetics effect of great beauty in the architectural fountain |
| 64 | Rain bow jets Design no.12022181 (A&H)ProvidedRain bow jet nozzle is special nozzle that is used to achieve greater fountain height ,preferred in musical and dancing fountain. |
| 65 | for supervision and installation and workmanship 25% |
AI Tender Summary
Tender Timeline
Apr 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender