|
| 1 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 2 | a). All works upto to plinth level |
| 3 | Precast plain Cement Tacktiles 32mm thk of required shade in floors, treads of steps and landing laid on 25mm bed of cement mortar 1:4(1cement:4coarse sand) jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing complete. |
| 4 | Hand railing:-Providing & fixing in position hand rail in staircase, landings and the like with 2” dia G.I. pipe (light class) resting on 50 x 50 mm M.S.square bars of clear height 40 cms placed at 50 cm including making necessary holdfast fixtures (30mm square bars 22 cms long) embedded in staircase concrete for resting the M.S. vertical square bars with holding etc. as required including bending the G.I. pipe to |
| 5 | Dismantling and removing mangalore roofing tiles from roofs including ridges, hips, valleys, sheets, wind ties etc. but excluding battens, roof timber etc. and stacking materials within a distance of 50mt. |
| 6 | Laying manglore roofing tiles, ridges, valleys etc. complete on roofs over existing battens rafters etc. (Tiles to be issued by the department) |
| 7 | Renewing wooden battens in roofs including making good the holes in walls & painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 meter lead |
| 8 | Providing and fixing woodwork wrought, framed and fixed in position in purlins common rafters, bressumers, wall plates joists and the like in roof work. |
| 9 | c..Second class matti wood |
| 10 | a.. Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 11 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 12 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete |
| 13 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 14 | Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 15 | Repairs to plaster in patches of 2.5 sq.m. and under including cuttingthe patch in proper shape and preparingand plastering the surface of the walls complete including disposal of rubbish to the dumpingground within 50m lead. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 16 | Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 17 | Providing and fixing colored ceramic tiles spartek or equivalent of 12”x12” (399 x 150 mm cut size) 6mm thick in skirting and dados on 12mm thick cement plaster 1:3(1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 18 | Proving and fixing white vitreous china water closet squatting (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C. flushing cistern (of approved make) with fittings, rack bolts 32mm diameter P.V.C. telescopic flush pipe with fittings and clamps 25 mm P.V.C. over flow pipe with specials and mosquito proof coupling of approved municipal design and nylon chain and pull complete, cutting and making good the walls and floors where required. |
| 19 | a. W.C. pan with white plastic seat and lid. |
| 20 | Providing and fixing 15 liters low level white vitreous china flushing cistern of approved make with fittings such as lead, valve less siphon etc and C.P. brass handle complete. |
| 21 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design |
| 22 | b. 150 x 100 mm size –P or S type |
| 23 | Providing and fixing brass bib cock (heavy) of approved quality |
| 24 | a.. 15 mm nominal bore |
| 25 | 20mm door shutter is made by using 20mm x 155mm x 1.2mm UPVC multi-cavity section and boarder of 30mm x 40mm x 2.5mm UPVC multi-cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter in stainless steel hinges & S.S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq.mtr. These UPVC sections are tested by using BS 2782 & DIN 53459 test methods. |
| 26 | UPVC door frame is made out of UPVC extruded multi cavity frame of 60mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. channel & welded in corners with average weight 0.80 kg per running meter. These frames are tested by using BS 2782 & DIN 53459 test methods. |
| 27 | Providing and fixing coloured ceramic tiles spartek or equivalent of 12\" x 12\" size and 6 mm thick in floors thread of steps and landing on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
