Improvement Of C.C Road And Side Drain At Sudhamapuri ( E.B No- 00-10-2 In Ward No. 259 ) In Babarpur Ac-67.
Tender Value
31.30 Lakhs
Estimated cost
Bid Submission
19 Apr 2022
0 days left
EMD
62602
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shahdara → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of C.C Road And Side Drain At Sudhamapuri ( E.B No- 00-10-2 In Ward No. 259 ) In Babarpur Ac-67.
BOQ
| Sl. No. | Item Description |
| 1 | Hire charges of JCB machine with operator & helper, fuel etc complete for miscelleneous work at site etc. |
| 2 | Demolishing brick work mannually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres leadas per direction of Engineer in charge :In cement mortar. |
| 3 | Desilting of side drains and disposal of material to nearby EDMC dhalao within 1 km by tractor trolleyincluding loading , unloading etc complete including execution of work in foul conditions: All kinds of soil. |
| 4 | Disposal of malba, garbage by mchanically means up to a lead of 8 km shastri park MCD disposal site including loading, unloading etc.all complete in all kinds of malba. The dumping charges deposited/paid by the contractor to EDMC on actual basis and the same shall be reimbursed to contractor by deptt. separetly after submission of paid receipts |
| 5 | Filling of available malba in side drains and compaction within a lead of 50m as per level requirement at site. |
| 6 | Raising Manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required(Raising depth of Manhole to be paid separately ) Circular manhole 140cm width circular cover 600mm dia of grade EHD 35 |
| 7 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (Zone-III): 8 graded stone aggregate 40mm nominal size) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete:40 mm thick with 20 mm nominal size stone aggregate. |
| 11 | 12mm cement plasterfinished with a floating coat of neat cement of mix1:4 (1cement : 4 fine sand). |
| 12 | Supply & filling of C& D recycled products, recycled aggregate 40mm size including loading, unloading, ramming,consolading and dressing complete with all leads & lifts |
| 13 | Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate /retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. M-10 grade plain cement concrete ( cement content considered @ 220 kg /cum). |
| 14 | Providing and laying RMC of M-30 grade By using minimum 400 kg of cement (43 grade, OPC) per cum of concrete in roads / streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/ retard setting of concrete to improve workability with out impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction / expansion, construction of cross / longitudinal joints of size 10mm wide 50mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer in-charge. (Cost of joint filler & sealants shall be paid for separately under relevant items). Note:- Cement content considered in M-30 is @ 400 Kg/Cum. Excess/less cement used as per design mix is payable/ recoverable separately M-30 RMC by using minimum cement @ 400 kg/cum. Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer. |
| 15 | Providing and fixing red sand slab 40mm thick over drain. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality HD-20 Circular shape 560 mm internal diameter |
| 20 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete\ for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edgesm with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Apr 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender