|
| 1 | Supply, erection, testing and commissioning of Hot dip galvanised octagonal pole of 7.5 m height, top dia 70 mm bottom dia 135 mm, Base plate 225mm x 225 mm x 16 mm, foundation bolt M20 x 700 - 04 Nos complete with single arm GI bracket of suitable size and including built in connecter control box withlocking arrangement along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box all as directed including dismantling old one complete all as specified and directed.(Make: Jindal Steel / National Tubing Co / Bombay Tubes & Store / Calcutta Poles & Tubes / Bajaj / Crompton Greaves / Philips ). |
| 2 | NOTE :- The rate quoted shall include the following :(i) The required RCC foundation shall be designed as per manufacturers instructions considering safe bearing capacity of soil as 10 t/m2 which shall be got approved by GE before execution of work.. (ii) Necessary Earth work, RCC M-20 shallow foundation, reinforcement steel as per design, foundation bolts manufactured with special steel along with nuts, washers, anchor plates & templates complete setetc.(iii) Erection and commissioning of the octagonal pole with the help of suitable T & P. |
| 3 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed.Make : Havells / Philips / GE / Wipro. |
| 4 | Supplying, laying, testing and commissioning LT XLPE insulated , armoured heavy duty electric cable of following sizes, 1100 volts grade with stranded aluminium conductor laid in trenches / passing through pipe / duct/ road crossing /fixed on poles / wallsComplete all as specified and directed.MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex[Note: The rate quoted shall inclusive of termination at ends with suitable aluminium lugs where required] |
| 5 | 25 sqmm 4 Core |
| 6 | 70 sqmm 3.5 Core |
| 7 | Supply & fixing of timelite distribution boards (street light DBs) 65 A Triple pole with MCB 63 Amp TPN with 230 V digital 24 Hr timer switch complete all as specified and directed. Make:Indo Asian /HPL / Havells |
| 8 | Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft / loose soil complete all asspecified and directed. |
| 9 | Returning and filling in of excavated material any type including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all asspecified and directed. |
| 10 | Removal of surplus excavated material of any type to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5 m bove the starting point complete all asspecified and directed. |
| 11 | M&L for sand cushioning / sand coveringfor underground cable protection complete all as specified.Note: Punned thickness shall only be measured and paid. |
| 12 | Supply and laying sub class \"B\" bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge |
| 13 | M&L for GI pipe light grade 50 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge .Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash |
| 14 | Cutting trench through road/ wall to a width of 20cm and depth of 30cm for inserting GI protection pipe for drawing cable and filling back the trench with PCC 1:3:6 type C1 complete all as directed.( NOTE : GI pipe will be measured and paid separately ) |
| 15 | M & L Earthing for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6 mm with GI pipe, nuts, bolts and washers complete upto and including test point made out of 40x3 mm GI flat, PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt 15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009. |
| 16 | S&F PVC insulated 3 core 1.5 sqmm stranded copper conductor cable for connecting junction box to street light fitting, testing and commissioning all as directed.MAKE : Polycab /Finolex / Havell |
| 17 | Supply, fabricate, install, testing and commissioning of LT feeder panel board of size 0.9 mtr length x 1 mtr height x 0.60 mtr depth out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on suitable size foundation with 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement alongwith metering arrangments (Multifunctioning meter) compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including horizantal busbar of aluminium strip 40 x 10 mm for threephase 4 wire including the following accessories and fitted in : - (a)Incomming: MCCB high breaking capacity4 pole 415 volt 25 KA breaking capacity adjustable thermal release range 100 Amps – 01 No |
| 18 | (b) Outgoing:(i) MCCBAC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp – 03 Nos(ii) 3 phase Multifunctional Digital Meter consisting of ammeter, voltmeter, frequency meter, PF alongwith suitable CTs Complete control panel wiring with 1.5 sqmm stranded copper conductor alongwith one set of indicator lamp for RYB for incoming and outgoing feeders(iii) Lock pedestal – 01.Makes : (i)MCCB/MCB : Legrand / L & T / Siemens / ABB / C & S / Schneider / GE(ii) Volt Meter/Ammeter : Havells / HPL / L & T / AE / Schneider / BCH |
| 19 | M&L for top overhauling of Diesel engine by dismantling the sub-assemblies such as fuel pump, fuel injection, Governor, turbo- charger, radiator, oil-cooler, engine heads, rocker arms, self starter, dynamo-engine wiring, terminal contacts and safety controls etc including replacement of spare parts as required and re-assembling the sub-assemblies after carrying out necessary repairs including de-scaling of raditor by dismantling the upper and lower tank and clenaing the core pipes with cleaning chemicals (radi wash), components and arrest the leaking core by brazing/ dummy with lead including cleaning of upper and lower tanks and replacing the upper and lower gaskets and required nuts, bolts, refixing the same including testing and painting with a coat of approved colour complete andtesting and commissioning after carrying out overhauling for following DG sets complete all as specified and directed by Engineer -in-Charge. . |
| 20 | Notes: (a) Overhauling of DG set shall be carried out by OEM / Authorized service dealer. Manufacturers authorisation cetifcate shall be submitted in case of service is done by authorizedservice dealer of OEM.(b) The rate quoted shall inclusive of repair & Calibration of turbosuper charger, PT fuel pump & Injectors as per calibration procedure and norms all as per manufacturers guide lines. (c) Spare parts required for top over hauling shall be measured and paid separately as supply only as mentioned here in after , however the rate quoted shall inclusive for replacement ofsame. If any spare parts otherthan mentioned here in after are necessaryto complete Overhauling shall be included in quoted rate. |
| 21 | DG set of capacity 320 KVA , Model No- TBD2V12, Engine No-.13151250238 ofM/S Cotton Greaves |
| 22 | DG set of capacity 320 KVA, Model No-TBD2V12, Engine No-.51250255 for M/S Cotton Greaves |
| 23 | DG set of capacity 320 KVA, Model No TBD2V12, Engine No-332312903017 for M/S Cotton Greaves |
| 24 | Supply only following Spare parts of DG set : |
| 25 | Set of Flexible Pipes, CAT No- 123200194307 |
| 26 | Set of Sealing Rings, CAT No-123200193438 |
| 27 | Set of Hoses, CAT No-123200192858 |
| 28 | Set of Hoseclips, CAT No-123200193898 |
| 29 | W.T. Guage, CAT No-105685000621 |
| 30 | LOT Guage, CAT No-105681021034 |
| 31 | Pressure Guage, CAT No-105612412501 |
| 32 | RPM Meter, CAT No-105652020108 |
| 33 | RPM Cable, CAT No-103010151501 |
| 34 | V-Belt A-44, CAT No-103460211118 |
| 35 | V-Belt A-66, CAT No-103460211676 |
| 36 | Lube Oil Filter, CAT No-605411880008 |
| 37 | Fuel Filter, CAT No-001200240911 |
| 38 | Fuel Filter, CAT No-001200240912 |
| 39 | Fuel Pre Filter 5 It, CAT No-105413100062 |
| 40 | 0 Ring, CAT No-106900000033 |
| 41 | A.V. Mounting, CAT No-606500100006 |
| 42 | A.V. Mounting, CAT No-606500100210 |
| 43 | AVR, CAT No-700000790112 |
| 44 | Stud, CAT No-602007000845 |
| 45 | Nut, CAT No-602100540080 |
| 46 | Washer, CAT No-602160100080 |
| 47 | Lube Oil Cooler, CAT No-123209400227 |
| 48 | Injector Overflow Pipe, CAT No-123209390985 |
| 49 | Cooling Water Pipe, CAT No-623209120165 |
| 50 | Cooling Water Pipe, CAT No-623209120265 |
| 51 | Thermostat, CAT No-605250100010 |
| 52 | Starter Gear Ring, CAT No-623203750024 |
| 53 | Pipe Cooler to engine, CAT No-123209121005 |
| 54 | Pipe Pump to Cooler, CAT No-123209121495 |
| 55 | Pipe, CAT No-123209151615 |
| 56 | Hand Priming Pump, CAT No-105200100005 |
| 57 | Head Gasket, CAT No-623208550064Cyl |
| 58 | Set of Gasket CAT No-123200193557 |
| 59 | Con. Rod Bearing CAT No-623204306007 |
| 60 | Set of 0 Ring CAT No-123200190208 |
| 61 | Stem Seal, CAT No-604962000002 |
| 62 | Ring, CAT No-106900000033 |
| 63 | A.V. Mounting, CAT No-P21190850024 |
| 64 | Magnetic Pickup, CAT No-100007760793 |
| 65 | Digital RPM Meter, CAT No-105652090146 |
| 66 | Electrical Control Unit, CAT No-106902090058 |
| 67 | Cyl. Head Bolt, CAT No-602000131615 |
| 68 | Con. Rod Bolt, CAT No-123203530014 |
| 69 | Swivel Joint, CAT No-602700550081 |
| 70 | Swivel Joint, CAT No-602700550082 |
| 71 | Cylinder Liner, CAT No 123201320014 |
| 72 | Piston, CAT No-623201600106 |
| 73 | Piston Ring Set, CAT No-623200197227 |
| 74 | Push Rod, CAT No-623203210034 |
| 75 | Inj Sleeve, CAT No-623203300094 |
| 76 | Ring, CAT No-623203400064 |