|
| 1 | REPAIR / MAINTENANCE OF INTERNAL WIRING INCLUDING FITTING AND FIXTURE, CEILING / EXHAUST / AIR CIRCULATOR / WALL FANS, MCB, DB\"s, HANGER LIGHTS, EARTHING, FLOOD LIGHTS AND CONNECTED WORKS FOR SOUTH SIDE OF RUNWAY UNDER AGE E/M I OF GE (NW) VASCO |
| 2 | Taking down carefully any type of copper/aluminium point wiring (light,fan, socket or power) complete including conduits/casing caping with fittings such as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of wallSupply & Fixingloors etc to match with the original existing finish complete all as specified and as directed |
| 3 | Material & Labour for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wiredrawn in and including PVC Casing & Caping double lock/conduit pipe type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminatedin to Cast iron/pressed steel terminal box 60mm deep of required sizemade out of 2 mm thick MS sheet duly painted both sides with 3 mm thick plasticlaminated sheet top coverfixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top coverfor mounting switches, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed |
| 4 | All as per item No. 1.02 here in before, but for one fan/exhaust fan point controlled by one 5 Amp all as specified and as directed. |
| 5 | All as per item No. 1.02 here in before,but for one bell/buzzer point controlled by one bell push 5 Amp all as specified and as directed. |
| 6 | All as per item No. 1.02 here in before, but for one light point controlled by two 2-way switches all as specified and as directed. |
| 7 | All as per item No. 1.02 here in before, but for one 3/5 Pin, 5 Amp Switch socket out leton the independent board complete all as specified and as directed |
| 8 | All as per item No 1.02 above, butwith 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switchon the ndependent board complete all as specified and as directed. |
| 9 | Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed. |
| 10 | Material & Labour for sub main wiring with two runs of single core 2.5 Sqm, FRLSCopper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigidPVC casing caping (double interlock type) of suitable width medium dutywith all accessories such as Tees, elbows,junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLSinsulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit) |
| 11 | All as per item No 1.09 here in before, but two run of single core 4 sqmm and one run of 2.5 sqmm cables as earth continuity conductor all as directed. |
| 12 | All as per item No1.09 here in before, but two run of single core 6 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed. |
| 13 | All as per item No 1.09 here in before, but four run of single core 10 sqmm and two runs of 06 sqmm cables as earth continuity conductor all as directed. |
| 14 | Supply & Fixing in repairs Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed |
| 15 | Supply & Fixing in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed |
| 16 | Supply & Fixing in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed |
| 17 | Supply & Fixing in repairs Bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed |
| 18 | Supply & Fixing in repairs Modular Bell push single pole, one way, 240 V, 6 Acomplete all as specified and as directed |
| 19 | Supply & Fixing in repairs Switch Socket combination 2 in 1, 5 Amp flush type, 240 V,complete all as specified and as directed |
| 20 | Supply & Fixing in repairsModular Socket outlet 2 in 1, 6 Amp, 240 volts,complete all as specified and as directed |
| 21 | Supply & Fixing in repairs Switch Socket Combination 5A/16A, 5 in 1, 3 pin,240 volts complete all as specified and as directed |
| 22 | Supply & Fixing in repairs Modular Socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 voltscomplete all as specified and as directed |
| 23 | Supply & Fixing in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 voltscomplete all as specified and as directed |
| 24 | Supply & Fixing in repairs call bell ding dongAC, 230 volts, single pole all as directed |
| 25 | Supply & Fixing in repairs stepped type electronic fan regulator flush type as per exisitng model on the existing board all as directed. |
| 26 | Supply & Fixing in repairs stepped Modular electronic fan regulator flush type on the existing board all as directed. |
| 27 | Supply & Fixing in repairs modular flush metal box with inner & outer sheetfixed in 60 mm deep of followingsizefixed with screwfor mounting modular switches, Sockets, fan regulators etcfor existing elect arrangements and connected to the existing elect wires, making good the distrubed area with cement work and paints as same existing backgound all as directed.(Note : New modular switches, socket Supply & Fixingan regulators will be measured and paid separely)(a) Size of the boxessuitable for 1/2 module |
| 28 | All as per item No. 1.26 here in before, but Size of the boxsuitable for 3 module |
| 29 | All as per item No. 1.26 here in before, but Size of the box suitable for 4 module |
| 30 | All as per item No. 1.26 here in before, but Size of the box suitable for 6 module |
| 31 | All as per item No. 1.26 here in before, but Size of the box suitable for 8 module |
| 32 | All as per item No. 1.26 here in before, but Size of the box suitable for 12 module |
| 33 | Supply & Fixing in repairs White inner, outer cover plate Modular type with frame, 2 module |
| 34 | All as per item No 1.32 here in before but 3 module |
| 35 | All as per item No 1.32 here in before but 4 module |
| 36 | All as per item No 1.32here in before but 6 module |
| 37 | All as per item No 1.32 here in before but 8 module |
| 38 | All as per item No 1.32 here in before but 12 module |
| 39 | Supply & Fixing in repairs PVC Casing & Caping double lock type of as required width (not less than 20/25 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling etc. complete all as specified and as directed. |
| 40 | Supply & Fixing in repairs knob suitable for Rotary type Flamproof switch in LM6,15A single pole 250V complete all as specified and as directed. |
| 41 | Taking down unserviceable any type of Main Switch, DB\"s including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed. |
| 42 | Supply & Fixing in repairs sheet metal enclosure SPN with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified. |
| 43 | All as per item No 1.41 here in before but MCB DB TPN 4 way DB 415 V with 200 A rated busbar. |
| 44 | Supply & Fixing in repairs MCB DB SPN 8 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed. |
| 45 | All as per item No 1.43 here in before but MCB DB SPN 4 way DB 230 V with 200 A rated busbar. |
| 46 | All as per item No 1.43 here in before but MCB DB SPN 12 way DB 230 V with 200 A rated busbar. |
| 47 | Supply & Fixing in repairs MCCB DB TPN, 4 way, (MCCB + 12 way O/G) double door, vertical type icluding provision of one MCCB of 100 amps breaking capacity 25 KA , 4 pole without MCB complete all as specified and as directed |
| 48 | Supply and fix in repairs MCCB of 100 to 125 A breaking capacity 18/25 KA , 4 pole thermal megnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing DB\"s complete all as specified and as directed |
| 49 | Supply & Fixing in repairs MCB TPN40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 50 | Supply & Fixing in repairs MCB TPN32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 51 | Supply & Fixing in repairs MCB TP40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 52 | Supply & Fixing in repairs MCB TP32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 53 | Supply & Fixing in repairsMCB SPN06 -32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 54 | Supply & Fixing in repairsMCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 55 | Supply & Fixing in repairswall mounting Plug and socket DBs TPN 32 Amp Complete all as specified. |
| 56 | Fixing only Energy efficient surface Mounted LED Luminire 18 watts 4\" long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr and removal of old unserviceable lightscomlete all as specified and directed by Engr-in-Charge.Note :- (a) LED tube lights fittings will be supplied under Sch B items. |
| 57 | Supply & FixingEnergy efficient surface Mounted LED Luminire 20 watts 4\" long, with acrylic cover aluminium exeruded body completeall as specified and directed by Engr-in-Charge. |
| 58 | Supply & FixingEnergy efficient surface Mounted LED Luminire 40 watts 4\" long, with LED betten for surface pandent and condute mounting hiegh transmissitivity defuser and heigh lumen output completeall as specified and directed by Engr-in-Charge. Note:- hanging arrangement are deemed to be quited rate. |
| 59 | Supply and fixing LED light fitting 1x18 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectio with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. |
| 60 | Supply & Fixing in repairs Energy efficient surface Mounted LED Luminire 10 watts 2\" long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed. |
| 61 | Supply & Fixing in repairs recess /surfacemounting high lumenLED flat panel 1\"X1\" 18 Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessaryfixing arrangementat any height and removing old unserviceable item complete all as specified and directed. |
| 62 | Supply & Fixing in repairs recess/ surface mounting high lumen LED flat panel 2\"X2\" 43 Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessaryfixing arrangementat any height and removing old unserviceable item complete all as specified and directed. |
| 63 | Taking down old unservicable CFL bulb and Supply and fix retrofit LED bulb 12/15W 240volts,50Hz, including removing old unserviceable item complete all as specified and directed. |
| 64 | Supply & Fixing in repairs LED light fitting 1x18 watts Surface/recess mounted LED downlighter in powder coated white finish with integrated electronic driver complete all as directed. |
| 65 | Material & Labour for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip size 20 x 3 mm thickby mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earthing strip shall be provided with GI pipe light grade 32 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamberin cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed. |
| 66 | Material & Labour for Earthing complete with Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamberin cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed. |
| 67 | Supply & Fixing copper strip 20 x 3 mm Earth continuity conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc all as specified. all as specified. |
| 68 | Material & Labour for exhaust fan AC single phase 230V of size 300 mm sweep 1400 RPMheavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified. |
| 69 | Material & Labour for exhaust fan AC single phase 230V of size 380 mm sweep 1400 RPMheavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified. |
| 70 | Material & Labour for exhaust fan AC single phase 230V of size 450 mm sweep 1400 RPM heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified. |
| 71 | Supply & Fixing in repairs Switch Flameproof WP Rotary type with termination box in LM6,15A single pole 250V |
| 72 | Supply & Fixing in repairsFlameproof Switch socket combination with termination box in LM6,16A single pole 250V |
| 73 | Supply & Fixing in repairs Air termination, single pointed copper rod 12 mm dia and 300 mm long. |
| 74 | Supply & Fixing in repairs Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hex. Head screw |
| 75 | Taking down Aluminum strip of size 20 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground and refixing in the same location with new nuts and bolts, screwsof suitable size and length and connected to air termination rod on op of the hangar complete all as directed |
| 76 | Supply & Fixing in repairs Copper strip 20 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground incl taking out old one all as specified. |
| 77 | Supply & Fixing in repairs Integral decorative LED bollard with opal acrylic with IP-65 protection of9 watts capacity all as directed. |
| 78 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work for pole coping all as dirceted. |
| 79 | Supply & Fixing in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified |
| 80 | Supply & Fixing in repairs 1 x 60 watts LED building security light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified. |
| 81 | Supply and fixin replacement of 90 Watt LED street light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED\"s must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 100 lumen/Watt.The luminarie should have 5 KV surge protection,PF > 0.95, and total harmonic distortion of THD < 10%, voltage range of 140-280V should be provided.The manufactures LOGO must be embossed/Engraved in the housing of the luminarie complete all as specefied and directed by Engr-in-charge. |
| 82 | Material & Labour for Street light bracket made out of GI tubing 32/40 mm dia, light grade bend to shape suitable for below mentioned security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc. |
| 83 | Supply & Fixing in repairs LED High bay luminaires 1 x 150 watts Energy saving, environment friendly & robust open type vertical Highbay LED luminaire with high power COB LED as light source all as specified and as directed |
| 84 | Supply & Fixing in repairs LED High bay luminaires 1 x 200 watts Energy saving, environment friendly & robust open type vertical Highbay LED luminaire with high power COB LED as light source all as specified and as directed |
| 85 | Supply and fixin repairs LED flood light fitting 200 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED\"s and electronic driver, internally prewiredincluding necessary fixing arrangement on PCC pole by providingMS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and directed. |
| 86 | Supply and fixin repairs LED flood light fitting 240 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED\"s and electronic driver, internally prewiredincluding necessary fixing arrangement on PCC pole by providingMS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and directed. |
| 87 | Taking down carefully ceiling fans of size 1200/1400 mm sweep at any height of any sweep/make/model after disconnecting electric connection and dismantling andopening the body of ceiling fan and examine for repairs including servicing, overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws, nuts, spring washers for blade/body etc and replacement of components/accessories such as ball bearings,gun metal bushes, capacitor, canopy top & bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. Note :- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only (ii)Rewinding of fan motor,painting will be measured and paid separetly under relevant item of schedule.(iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate |
| 88 | All as per item No. 1.86 above,butexhaust fan of size upto 300 mm and 380 mm sweep all as directed. |
| 89 | All as per item No. 1.86 above,butexhaust fan of metal body size above 380 mm and upto 450 mm sweep all as directed. |
| 90 | All as per item No. 1.86 above, butAir circulator wall mounted type 450 mm to 600 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism andmaking functional for satisfactoryperformance. |
| 91 | All as per item No. 1.86 above, but forwall fan/pedestal fan400 mm sweep including carrying out repairs to oscillation mechanism/ speed regulation mechanism andmaking functional for satisfactoryperformance. |
| 92 | Material and labour for painting to ceiling fan of size 1200 mm sweep to 1400 mm sweep complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paintby using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and directed directed.Make of paint :- Asian/Berger/Nerolac(Note :- Painting work to be carried out after dismantling of ceiling fan) |
| 93 | All as per item No. 1.91 above,butexhaust fan of metal body size above 300 mm to 450 mm sweep all as directed. |
| 94 | All as per item No. 1.91 above,butAir circulator wall mounted type 450 mm to 600 mm sweep all as directed. |
| 95 | Material and labour for rewinding of ceiling fan motorof size 1200 mm sweep to 1400 mm sweep of any make/ model / type with new supper enamelled copper winding wire ofsimilar gauge and number of turns as existing, including cleaningthe motor properlyand applyingvarnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motorcomplete all as specified and directed. |
| 96 | All as per item No 1.94 here in before but of exhaust fan of size upto 300 mm and 380 mm sweep all as directed. |
| 97 | All as per item No 1.94 here in before but of exhaust fan of size above 380 mm and upto 450 mm sweep all as directed. |
| 98 | All as per item No 1.94 here in before but of Air circulator wall mounted type 450 mm to 600 mm sweep all as directed. |
| 99 | Supply & Fixing in repairs capacitor of 2.5/3.15/4.0 mfd capacity for ceiling fan of any sweep all as specified. |
| 100 | Supply only shackle clip assembly with rubber bush reel and nuts,bolts and washers suitable for ceiling fan of any sweep/type. |
| 101 | Supply only ball bearing suitable for ceiling fan/exhaust fan/air circulator/ pedestal fan any type all as directed. |
| 102 | Supply only split pin as per sample suitable for ceiling fan all as directed. |
| 103 | Supply only MS nut bolt with split pin as per sample and as directed by Engr-in-charge |
| 104 | Supply only plastic conopy top and bottom with tighten screw suitable for ceiling fan of any sweep/type. |
| 105 | Supply and fix down rodmade of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rodwith two coat of synthetic enamel paintover one coat of red oxide primer. |
| 106 | Supply and Fix in repair Ceiling Fan motor with body complete suitable 1200 mm Sweep matching to blade of existing ceiling fan all as specified and as directed. |
| 107 | Supply and Fixin repair Fan Blade set of three suitable of any make and sweep up to 1200 mm sweep matching to existing ceiling fan all as specified and as directed.MakeNote:- Fan Blade make and size shuld be supply with the mach of under relivent item of Sch Aserial No 105 as above. |
| 108 | Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;0.75 sqmm and including electric connection to ceiling fan and ceiling rosecomplete all as specified and directed |
| 109 | Removing old unserviceable blade assembly from exhaust fan and supply and fix exhaust fan blade assembly suitable of size 300 mm to 450 mm sweep andincluding locking nuts and testing complete all as specified and directed. |
| 110 | Supply and fix in repairs new metal blade assy complete for air circulator of existing make and type all as directed. |
| 111 | Taking down storage type water heater (Geyser)25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric and water supply connections and keeping the same in safe custody for carry out repairs/replacement of unserviceable spare parts & components such as heating element, thermostat,pilot lamps with wiring,insulating glass wool, thermal cut out,pressure release valve,safety valve,aperature plate assembly etc andexmine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut,bolts and washers etcand adjust to required range of thermostat controland assembling all parts/ accessories includingfixing back in same location after connecting up of water & electric connections and testing for its satisfatory functioning complete all as specified and directed.Note :-(i) Spares will be measured and paid separately under relevant item of schedule as supply only(ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate. |
| 112 | All as per item No 2.10 above, but of capacity50 litre |
| 113 | Supply & Fixing in repairs heating element threaded/push type of triangle base/round base type 1.5/2 KW for geysers |
| 114 | Supply only aperature plate assembly suitable for storage type water heater (geyser) 25/50 litre capacitycomplete all as specified and directed |
| 115 | Supplyonly copper/steel inner tank suitable for storage type water heater (geyser) 25/50 litre capacity. |
| 116 | Supply onlygeyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type |
| 117 | Supply and fix PVC connection pipe15 mm dia 450/600mm long with end nuts and washer, suitable for hot water and cold water outlet/inlet of geyser inlcuding removing old unserviceable item completeall as specified and directed. |
| 118 | Supply and fixbib tap 15 mm dia standard pattern of PTMTwhite colourhigh pressure screwed for iron GI pipe/fittingsinlcuding removing old unserviceable item complete all as specified and directed |
| 119 | Supply and fix stop valve 15 mm dia, cast copper alloy chromium plated with crutch handle screwed both ends for GI pipe/fittingsinlcuding removing old unserviceable item complete all as specified and directed |
| 120 | Supplyand fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;2.5 sqmm and including connection to geyser and plug outlet andinlcuding removing old unserviceable item complete all as specified and directed |
| 121 | Material and labour for painting to storage type water heater(Geyser)of capacity 25litre of any make/type to completeexternal body with two coat of synthetic enamel paintby using electric spray machine similar to match withexisting colour after preparation of surfaces including marking MES Number with black paintcomplete all as specified and directed directed. Make of paint:-Asian/Berger/Nerolac(Note :- Painting work to be carried out after dismantling of storage type water heater (geyser) |
| 122 | All as per item No 2.20 above but of capacity 50 litre |
| 123 | Supply & Fixing in repairs thermostat BI-metal thermal relay suitable for geyser of any capacity all as directed. |
| 124 | REPAIR / MAINTENANCE OF CHIMNEY AND CONNECTED ITEMS MCB, STARTER AT HANSA VIHAR OF INS HANSA UNDER AGE E/M-I OF GE (NW) VASCO. |
| 125 | Dismantling the existing electric chimney system of 5/10 HP blower motor capacity complete by disconnecting all incoming and outgoing elect connections carefully along with blower motor, hood, hood cover, ducts, etc. removing the carbon / dust / oil layer from the inside wall of complete inlet / outlet ducting and hood system thoroughly by using kerosene / high pressure water jet wash / suitable solvent and re-assembling the same after completion of repair / cleaning work incl the following works :-(a)Alignment of whole system inlet and outlet blower assy with motor for smooth functioning incl greasing of blower and motor bearings.(b)Replacement of new rubber gasket for GI inlet / outlet duct flanges with new GI nut bolt and washers of suitable size.(c)Arrest the vibration of ducts by using suitable arrangements such as angle iron support, rubber pads, anchor bolts complete upto recommended level.(d)Painting of GI inlet / outlet ducts along with MS flanges and nut, boltsin the outer side by means of synthetic enamel paint two coat over a coat of red oxide primer. |
| 126 | Material & Labour for fabrication of stainless steel 1 mm thickness exhaust hood (size 1200mm x3000 mm +600 mm) with filter with SS angle framewith connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directed.(Location : Hansa Lehar ) |
| 127 | Supply & Fixing in repairs ball bearingfor blower shaft - 02 Nos & blower motor - 02 Nos suitable for 5 HP capacity blower motor Chimney all as directed. |
| 128 | Supply & Fixing in repairs ball bearingfor blower shaft - 02 Nos & blower motor - 02 Nos suitable for 10 HP capacity blower motor Chimney all as directed.( Location : Main gally) |
| 129 | Supply & Fixing in repairs canvas cloth suitable for Elect Chimney\"s Air inlet / outlet GI duct joints / extension incl replacement of old nut, bolt and washers complete all as directed |
| 130 | Supply & Fixing in repairs Air suction fan with blade 3-5 HP capacity Elect Chimney three phase with blade of existing capacity / rating / model and size and fixed in position all as directed. |
| 131 | Supply & Fixing in repairs incl fabrication of stainless steel ducting with SS angle frame for Fress air system andexhaust fan system of Air inlet / outlet duct with connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directed. |
| 132 | Supply & Fixing in repairs incl fabrication of stainless steel 2/3 HP Axel fanwithout motor 1440 rpm with SS angle frame connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directed. |
| 133 | Supply & Fixing in repairs incl fabrication of stainless steel 1 mm thickness , 3 HP centrifugal blower without motor 1440 rpm with SS angle frame connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directed. |
| 134 | Supply & Fixing in repairs incl fabrication of stainless steel 1 mm thickness, 5 HP centrifugal blower without motor 1440 rpm with SS angle frame connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directed. |
| 135 | Supply & Fixing in repairs incl fabrication of stainless steel 1 mm thickness ,10 HP centrifugal blower without motor 960 rpm with SS angle frame connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directed. |
| 136 | Supply & Fixing in repairs Fresh air alluminium grill of size 400 mm x 200 mm suitable for suction motor of existing capacity / rating / model and size and fixed in position all as directed. |
| 137 | Supply & Fixing in repairs Fresh air filter of 20 micron of size 550 mm x 550 mm x150 mm suitable for suction motor of existing capacity / rating / model and size and fixed in position all as directed. |
| 138 | Supply & Fixing air control damper of suitable ( size 300 mm x200 mm +100 mm ) complete all as specified and as per the directions of Engineer-in-charge. |
| 139 | M&L for fabrication of MS Stand (size 36\"x36\" +72\" ) for exhaustblowerwith connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directions of Engineer-in-charge. |
| 140 | M&L for fabrication of MS Stand(size 36\"x36\" +36\" ) for fresh air axle fan with connecting / supporting flange, rubber gasket, fixing clamps, nut, bolt and washers as per existing size and shape complete all as directions of Engineer-in-charge. |
| 141 | Disconnecting the motor from the blower assy of any make / model electric driven AC 3 phase, 415 Volts of5 to 10 HP of any make / model from any Elect Chimney\"stransporting to workshop dismantling, removing the burnt out windings, cleaning the starter slots and rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing and re-installation at same position includingcommissioning and testing complete all as specified. (Minor spares such as repair / replacement of terminal box, terminals, fan blade shall be deemed to included in the quoted rates) |
| 142 | Disconnecting the Air suction fan of any make/model electric driven AC three phase, 415 Volts 2-5 HP of any make / model from any Elect Chimney\"stransporting to workshop dismantling, removing the burnt out windings, cleaning the starter slots and rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing, replacement offan blade, bearings, bushes complete and re-installation at same position complete all as specified. |
| 143 | Supply & Fixing in repairs Exhaust Fan system complete all as specified and as per the directions of Engineer-in-charge. |
| 144 | Supply & Fixing three Phase DOL starter in SS enclosure suitable for7.5 HP motor of relay range: 13 to 22 Amps complete all as specified and as per the directions of Engineer-in-charge. |
| 145 | Material & Labour for cable 4 sqmm copper 3 phase system for 430 volt ,50 hz complete all as specified and directed by engr-in- charge. |
