Development Commissioner Handicrafts has published Inviting Expression Of Interests (Eois) For Empanelment Of Suppliers For Supply Of Handlooms/Handloom Accessories Etc. Supply Of Handlooms/Handloom Accessories Etc. To The Weavers Under Hathkargha Samvardhan Sahayata (Hss) In The Districts Varanasi, Chand. Submission Date for this Tender is 21-04-2022. Absorbents Tenders in varanasi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Handlooms: |
2 | Frame Loom 56” Banarasi Poles: size-3.5” X 4” (seasoned wood) Pole Height – 6 Feet Cloth beam- 4” Diameter, (Shakhu wood) Warp beam- 4” Diameter, (Shakhu wood) Sley(For 54” Banarasi Loom made of Shakhu wood) Jacquard Mounting Frame-1 No. 5 Wheel Take-up motion – 1 Set Treadles(Set of 4 Pcs) – 1 Set TightenerOR Phalli (Set of 2 Pcs) – 1 Set Heald Frame along with Gulla- Set of 4 frames (Suitable for 54” Handloom for Banarasi Silk weaving) – 1 Set Note: Entire loom made from “CHID WOOD” and shuttle boxes of Sisham wood is also acceptable. |
3 | Frame Loom 56” Suitable for Dury/Stole weaving Poles: size-3.5” X 4” (seasoned wood) Pole Height – 5.75 Feet Cloth beam- 4” Diameter, (Shakhu wood) Warp beam- 4” Diameter, (Shakhu wood) Sley (for 54” Dury handloom made from Shakhu wood) 5 Wheel Take-up motion – 1 Set Treadles(Set of 4 Pcs) – 1 Set TightenerOR Phalli (Set of 2 Pcs) – 1 Set Heald Frame with wire healds- Set of 4 frames (With 2000 wire healds, Suitable for Duri weaving on 56” Handloom) – 1 Set Note: Entire loom made from “CHID WOOD” and shuttle boxes of Sisham wood is also acceptable. |
4 | Frame Loom 72” Suitable for Dury/Stole weaving Poles: size-4” X 4” (seasoned wood) Pole Height – 5.75 Feet Cloth beam- 4” Diameter, (Shakhu wood) Warp beam- 4” Diameter, (Shakhu wood) Sley (for 60” Dury handloom made from Shakhu wood) 5 Wheel Take-up motion – 1 Set Treadles(Set of 4 Pcs) – 1 Set TightenerOR Phalli (Set of 2 Pcs) – 1 Set Heald Frame with wire healds- Set of 4 frames (With 2000 wire healds, Suitable for Duri weaving on 72” Handloom) – 1 Set Note: Entire loom made from “CHID WOOD” and shuttle boxes of Sisham wood is also acceptable. |
5 | Frame Loom 102” Suitable for Fabric/Bedsheet weaving Poles: size-4” X 4” (seasoned wood), Pole Height – 5.75 Feet Cloth beam- 4” Diameter, (Shakhu wood), Warp beam- 4” Diameter, (Shakhu wood), Sley (for 90” Fabric/Bedsheet handloom made of Shakhu wood), 5 Wheel Take-up motion – 1 Set, Treadles(Set of 4 Pcs) – 1 Set, TightenerOR Phalli (Set of 2 Pcs) – 1 Set, Heald Frame with wire healds- Set of 4 frames (With 3000 wire healds, Suitable for Fabric/Bedsheet weaving on 102” H/L) – 1 Set Note: Entire loom made from “CHID WOOD” and shuttle boxes of Sisham wood is also acceptable. |
6 | Front pole for Slay mounting-2 pieces, 4’’X4’’X5 feet Front pole- 2pieces, 4’’ X4’’X 4 feet Back pole -2 pieces, 4’’ X4’’X 2.5 feet Warp beam diameter-4’’ -1piece. Cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set Jacquard mounting frame-1 no. Slay- 1 piece, heald shafts set of 4 healds with Gulla & Fani- 1 set Treadle- Set of 4 treadles-1 set Neck cord- 1 ball, Jala- 1 kg, Naka—1/2 kg & pagia- ½ kg. Note- Rate to be quoted including pit digging and installation of pitloom. |
7 | Front pole for Slay mounting-2 pieces, 4’’X4’’X5 feet Front pole- 2pieces, 4’’ X4’’X 4 feet Back pole -2 pieces, 4’’ X4’’X 2.5 feet Warp beam diameter-4’’ -1piece. Cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set, Jacquard mounting frame-1 no. 2 shedding rollers (Biarol)- 1 set heald shafts set of 4 healds & Fani- 1 set, Treadle- set of 4 treadles- 1 set, Slay -1 piece, Neck cord- 1 ball, Jala- 1kg, Tana Garari- 12set, Comber board- 1 set, Mail Eye-, Hirness & lingoe of 10gm- 5200 set. Note- Rate to be quoted including pit digging and installation of pitloom. |
8 | Front pole for Slay mounting-2 pieces, 4’’X4’’X5 feet Front pole- 2pieces, 4’’ X4’’X 4 feet Back pole -2 pieces, 4’’ X4’’X 2.5 feet Warp beam diameter-4’’ -1piece. Cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set Slay- 1 piece, Heald shafts set of 4 healds &Fani - 1 set Treadle- Set of 4 treadles-1 set Note- Rate to be quoted including pit digging and installation of pitloom. |
9 | Front pole for Slay mounting-2 pieces, 4’’X4’’X5 feet Front pole- 2pieces, 4’’ X4’’X 4 feet Back pole -2 pieces, 4’’ X4’’X 2.5 feet Warp beam diameter-4’’ -1piece. Cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set Slay- 1 piece, Heald shafts set of 4 healds &Fani - 1 set Treadle- Set of 4 treadles-1 set Note- Rate to be quoted including pit digging and installationof pitloom. |
10 | Handloom Jacquards, Dobbey & Warping Machines |
11 | 100 chowk Jacquard Made with Shisham wood suitable for Banarasi Handloom along with set of following items:- Connecting lever – 1 No., Card Stand- 1 No. Punching plate – 1 Set Harness Ball – 10 No. Neck Cord (Nylon) – 200.00 gm Pagia (Nylon) – 1.00 Kg Naka (Nylon) – 500.00 gm Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
12 | 80 chowk Jacquard Made with Shisham wood suitable for Banarasi Handloom along with set of following items:- Connecting lever – 1 No., Card Stand- 1 No. Punching plate – 1 Set Harness Ball – 10 No. Neck Cord (Nylon) – 200.00 gm Pagia (Nylon) – 1.00 Kg Naka (Nylon) – 500.00 gm Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
13 | 60 chowk Jacquard Made with Shisham wood suitable for Banarasi Handloom along with set of following items:- Connecting lever – 1 No., Card Stand- 1 No. Punching plate – 1 Set Harness Ball – 10 No. Neck Cord (Nylon) – 200.00 gm Pagia (Nylon) – 1.00 Kg Naka (Nylon) – 500.00 gm Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
14 | 50 chowk Jacquard Made with Shisham wood suitable for Banarasi Handloom along with set of following items:- Connecting lever – 1 No., Card Stand- 1 No. Punching plate – 1 Set Harness Ball – 10 No. Neck Cord (Nylon) – 200.00 gm Pagia (Nylon) – 1.00 Kg Naka (Nylon) – 500.00 gm Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
15 | 40 chowk Jacquard Made with Shisham wood suitable for Banarasi Handloom along with set of following items:- Connecting lever – 1 No., Card Stand- 1 No. Punching plate – 1 Set Harness Ball – 10 No. Neck Cord (Nylon) – 200.00 gm Pagia (Nylon) – 1.00 Kg Naka (Nylon) – 500.00 gm Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
16 | 30 chowk Jacquard Made with Shisham wood suitable for Banarasi Handloom along with set of following items:- Connecting lever – 1 No., Card Stand- 1 No. Punching plate – 1 Set Harness Ball – 10 No. Neck Cord (Nylon) – 200.00 gm Pagia (Nylon) – 1.00 Kg Naka (Nylon) – 500.00 gm Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
17 | 480 Hook Electronic Jacquard with single phase self Driving Mechanism-1, Power including Motor= 600 watt.-1, Control Panel with USB Pen Drive support-1, Jacquard guide Board-1, Jacquard Harness connector/ Linker -480, Upper Gulla/ Shafts Driving Lever with Support Plate – 4, Bottom Gulla/ Shafts Driving lever with Support plate- 8, Double loop Naka with Dead weight/ Suwa12gm- 2400, Comber board with Aluminium Frame-1, 3Ply Nylon Gulla/ Shaft with steel Flat Pipe- 6 Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tying) |
18 | 640 Hook Electronic Jacquard with single phase self Driving Mechanism. Power including Motor= 700 watt. Control Panel with USB Pen Drive support-1, Jacquard guide Board-1, Jacquard Harness connector/ Linker -640, Upper Gulla/ Shafts Driving Lever with Support Plate – 4, Bottom Gulla/ Shafts Driving lever with Support plate- 8, Double loop Naka with Dead weight/ Suwa12gm- 2400, Comber board with Aluminium Frame-1, 3Ply Nylon Gulla/ Shaft with steel Flat Pipe- 6 Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tying) |
19 | 800 hook Electronic Jacquard with single phase self Driving Mechanism. Power including Motor= 750 watt. Control Panel with USB Pen Drive support-1, Jacquard guide Board-1, Jacquard Harness connector/ Linker -800, Upper Gulla/ Shafts Driving Lever with Support Plate – 4, Bottom Gulla/ Shafts Driving lever with Support plate- 8, Double loop Naka with Dead weight/ Suwa12gm- 2400, Comber board with Aluminium Frame-1, 3Ply Nylon Gulla/ Shaft with steel Flat Pipe- 6 Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tyeing) |
20 | 960 hook Electronic Jacquard with single phase self Driving Mechanism. Power including Motor=750watt. Control Panel with USB Pen Drive support-1, Jacquard guide Board-1, Jacquard Harness connector/ Linker -960, Upper Gulla/ Shafts Driving Lever with Support Plate – 4, Bottom Gulla/ Shafts Driving lever with Support plate- 8, Double loop Naka with Dead weight/ Suwa12gm- 2400, Comber board with Aluminium Frame-1, 3Ply Nylon Gulla/ Shaft with steel Flat Pipe- 6 Along with Installation & commissioning of Jacquard & Harnessing (Jala, Pagia Tying) |
21 | Horizontal Drum Warping Machine 72” For use of Handloom warping Made of Shakhu wood Drum Circumference – 5 yards Length – 72”, width – 8 feet Creel Capacity – 200 Bobbins With Warping Heck & Brake system arrangement Installation & commissioning included |
22 | For use of Handloom warping Made of Shakhu wood Drum Circumference – 5 yards Length – 90”, width – 8 feet Creel Capacity – 200 Bobbins With Warping Heck & Brake system arrangement Installation & commissioning included |
23 | For use of Handloom warping (Made from Sakhu wood) Circumference 4 yards, Pole Size- 4”X4”X6.5 feet, Heck – 1 feet X 1 feet – 2 pieces Creel Capacity – 100 Bobbins Installation & commissioning included |
24 | Handloom Accessories |
25 | With good quality single phase ISI motor AC ¼ HP 1440 RPM , good quality ISI wires, ISI switches, good quality parts, High weight lifting capacity Along with successful installation & commissioning on loom |
26 | Suitable for weaving of Kaduwa Buti on Handloom Please quote rate per Buti. With successful demo on loom |
27 | Reed – 96S x 50” |
28 | Reed – 100S x 50” |
29 | Reed – 104S x 50” |
30 | Reed – 112S x 50” |
31 | Reed – 116S x 50” |
32 | Reed – 120S x 50” |
33 | Reed - 24S x 50” |
34 | Reed - 24S x 72” |
35 | Reed - 24S x 102” |
36 | Reed – 20s x50’’ |
37 | Reed – 20s x72’’ |
38 | Reed – 20s x102’’ |
39 | Reed - 18S x50’’ |
40 | Reed - 18S x72’’ |
41 | Reed -18S x102’’ |
42 | Reed - 16S x50’’ |
43 | Reed - 16S x72’’ |
44 | Reed - 16S x102’’ |
45 | Reed – 14S x50’’ |
46 | Reed – 14S x72’’ |
47 | Reed – 14S x102’’ |
48 | Reed – 12S x50’’ |
49 | Reed –12S x 72’’ |
50 | Reed –12S x 102’’ |
51 | Reed – 10S x50’’ |
52 | Reed – 10S x72’’ |
53 | Reed – 10S x102’’ |
54 | Reed - 48S x50’’ |
55 | Reed - 48S x72’’ |
56 | Reed - 48S x102’’ |
57 | Reed - 44S x50’’ |
58 | Reed - 44S x72’’ |
59 | Reed - 44S x102’’ |
60 | Reed – 40S x50’’ |
61 | Reed – 40S x72’’ |
62 | Reed – 40S x102’’ |
63 | Reed - 36S x50’’ |
64 | Reed - 36S x72’’ |
65 | Reed - 36S x102’’ |
66 | Reed – 32S x50’’ |
67 | Reed – 32S x72’’ |
68 | Reed – 32S x102’’ |
69 | Reed – 28S x50’’ |
70 | Reed – 28S x72’’ |
71 | Reed – 28S x102’’ |
72 | Nylon Heald 96s(Complete set of Baser & Gulla)- Set of 4 Pcs |
73 | Nylon Heald 104s(Complete set of Baser & Gulla) |
74 | Nylon Heald 108s(Complete set of Baser & Gulla) |
75 | Nylon Heald 112s(Complete set of Baser & Gulla) |
76 | Nylon Heald 116s(Complete set of Baser & Gulla) |
77 | Nylon Heald 120s(Complete set of Baser & Gulla) |
78 | Nylon Heald 96(Complete set of Baser & Gulla)- Set of 5 Pcs |
79 | Wire Heald (13”) - Set of 1000 nos |
80 | Wire Heald (11”) - Set of 1000 nos |
81 | Horn shuttle – 10”, |
82 | Wooden Shuttle (Nav Vali) – Setof 4 Pcs, Suitable for Duri weaving |
83 | Sley – 60” (Sakhu wood),Suitable for Duri weaving |
84 | Elastic Cord –Packet of500 gm |
85 | Heald hook – Set of 2 Pcs |
86 | Lease Rod – Set of 4 Pcs |
87 | Bindhani – Set of 3 Pcs |
88 | Baiser – Set of 10 Pcs |
89 | Nari– Set of 50 pcs |
90 | Sirki – Set of 100 pcs |
91 | Cotton String (Thin) Packet of 500 gm |
92 | Punching Card Sheet- Cards 44 OZ for punching cars for Jacquard / Dobby |
93 | Comber Board for 56” loom-Frame made of Shakhu/Shiaham wood with fiber / wire mesh |
94 | Comber Board for 60” loom- Frame made of Shakhu/Shiaham wood with fiber / wire mesh |
95 | For use on harnessing on Handloom Made of Iron, weight – upto 8 gm, (rate per 1000) |
96 | For Jacquard/Dobby card cutting Made from Sakhu wood, Size- 36”X24” |
97 | Mat Form (Rate in Kg) |
98 | Ball Form (Rate per Piece ball) |
99 | For harnessing per 1000 |
100 | For lifting of Heald frames 2.5” dia X 2 feet (set of 2 Pcs) |
101 | For lifting of Heald frames(set of 8 Pcs) |
102 | Cotton String (Thick) Packet of 1.00 Kg |
103 | Cycle Charkha |
104 | Set of 5 wheel take-up motion |
105 | Wooden Treadles– Set of 4 Nos,2” X 2” X length 1.00 meter, suitable for Duri loom |
106 | 4” Diameter for 60” width Duri Handloom |
107 | 4” Diameter for 60” width Duri Handloom |
108 | 4” Diameter for 54” width Duri Handloom |
109 | 4” Diameter for 54” width Duri Handloom |
110 | Wooden Heald Frame Complete with varnish or steel wire healds Set of 4 Nos.,Suitable for 60” Duri handloom and use of 13” wire heald |
111 | Wooden Lam Rod – Set of 4 Nos-Suitable for 60” Duri handloom |
112 | Wooden Pirn 6” – Set of 100 Nos -Suitable for use in Naav Shuttle for Duri weaving |
113 | Bobbin – Set of 50 Pcs |
114 | With installation & Commissioning Solar Home Light with Solar Pannel – 60 Watt – 1 No. Battery 40AH Tubelar – 1 No., Charge Controller– 1 No., LED light – 5 Watt – 2 Nos. Ceiling Fan 25 watt– 1 No. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail