Construction Of Community Toilet At Panchanandapur Bazar Under Kaliachak-Ii Dev. Block, Malda.
Tender Value
5.82 Lakhs
Estimated cost
Bid Submission
29 Apr 2022
0 days left
EMD
11655
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kaliachak → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Toilet At Panchanandapur Bazar Under Kaliachak-Ii Dev. Block, Malda.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Apr-2022 | Extension of date | Date | 29-Apr-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m. [Ref : Building Works, Item 2.a, Page 01] |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.[Ref : Building Works, Item 1, Page 11] |
| 3 | Filling in foundation or plinth by Silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of silver sand (Payment to be made on measurements of finished quantity) |
| 4 | Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-In 6:3:1 proportion.charge, complete.In 6:3:1 proportion. |
| 5 | Brick work with 1st class bricks in cement mortar (6:1) in Foundation and Plinth |
| 6 | Earth work in in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer bylayer complete |
| 7 | 25 mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mmnominal size] and admixture of water proofing compound as per manufacturer\"s specification followed by two coat ofpolymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) asdirected (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required overconcrete or painted surface). |
| 8 | Brick work with 1st class bricks in cement mortar (6:1) in Superstructure. |
| 9 | Ordinary Cement Concrete ( Mix 3:1.5:1)with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any as per IS 456-2000.using Stone material of Rajmahal variety. |
| 10 | Reinforcement for reinforced concretework in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel.Engieer-in-Charge.Other than SAIL/TATA/RINL |
| 11 | 125 mm thick Brick work with 1st class brick in Cement Mortar (4:1). In Ground Floor |
| 12 | Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. Using 25 mm to 30 mm thick wooden shuttering as per direction of EIC, complete. |
| 13 | Plaster ( to wall, floor , ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary. 20 mm thick plaster in sand cement morter (1:6) |
| 14 | 10 mm thick plaster in sand cement morter (1:4) |
| 15 | 15 mm thick plaster in sand cement morter (1:6) |
| 16 | Neat Cement punning (about 1.50 mm thick) on wall, dado. |
| 17 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 18 | b ) Wall |
| 19 | M.S. or W. I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats andbars for windows,railing etc fitted & fixed with necessary screws and lugs. i ) Grill weighing above 10 kg / sqm and upto 16 kg./ Sqm. |
| 20 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 andmanufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc,including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing |
| 21 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete./ 4 mm thick |
| 22 | Labour for boring tube will of required dia by water jet System through any type of soil strata including hire & labour charges for boring pipe , scaffolding , tools & plants as necessary and taking out them and lowering pipes ,strainers , blind pipe etc. & filling and fixing the same complete including bucket washing and other incidental works in this connection . The Tube Well shouldhave an maximum 50 mm. gap in between the out side of the tube well and the bore.A) For the depth upto 150 m. For 50 mm. dia Tube-well with top enlargement of 100 mm. diai) 100 mm.dia boring |
| 23 | ii) 50 mm. dia boring |
| 24 | Supply of G.I. pipe of TATA make of different dia including necessary sockets.i) 100 mm.dia |
| 25 | ii) 50 mm. dia |
| 26 | Supplying G.I. pipe strainer with brass net & jacketted of approved quality. (Heavy Type)50 mm. dia |
| 27 | S/F/F steel cutter piece up to 450 mm long with socket. 50 mm dia. |
| 28 | Supplying and installation of approved make and brand Sub-mersiable pump includingconnecting cablepanel etc. all complete K.S.B. / C.R.I./Crompton |
| 29 | Supplying, fitting and fixing PVC insulated & sheathed Flexible three core flat cables of area 2.5 mm sqm as per stranded & bunched Type A of IS 5831/1984 & Sheathing to IS 8130/1984 for higher flexibility. are used to connect underwater as per ST I Type of IS 5831/1984. |
| 30 | Supplying , fitting and fixing Single PhasingVOLTAGE SENSING PREVENTER & AUTO START UNITSubmersible pump control panel (1/2 H.P. TO 2.0 H.P.range ) of L & T brand of an influential electronic circuit which keeps three stage worked electrical machines from single stage cut off, stage succession inversion and lopsided voltage. |
| 31 | Supplying , fitting and fixing G.I. cap at top. |
| 32 | Supplying , fitting and fixing check valve ( vertical ) G.M. tested to 21 kg. per sq.cm. |
| 33 | Supplying, fitting and fixing heavy type bell mouth reducing socket. |
| 34 | Washing and developing tube well with air compressor pump and engine for 8 ( eight ) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with V-notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect. |
| 35 | Packing the annular space between the outside of the tubewell pepes and strainers and bore with pea size washedgravels of approved quality having size from 2 mm. to 5 mm. the size approved by E.I.C. including costof materials labours & equipment complete |
| 36 | SupplyingP.V.C. water storage tank of approved quality with closed top with lid ( Black )– Multilayer |
| 37 | Labour for hoisting plastic water storage tank. |
| 38 | Labour for punching hole in P.V.C. water storage tank upto 50 mm. dia. |
| 39 | Supplying fitting and fix,ng G.l. pipe of TATA make with all necessary accessories , speciars viz socket, bend,tee , Union ,cross , elbo , nipple ,long screw, reducing , socket, reducing tee , short piece etc\" fitted with holder bats clamps including cuttingpipes makingthreads cutting trenches upto 1.5 meter below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipe and specials with bituminous paint complete in all respect.A ) For Exposed worka) 15 mm dia (TATA Medium) |
| 40 | b) 20 mm dia (TATA Medium) |
| 41 | c) 25 mm dia (TATA Medium |
| 42 | B ) For Concealed work15 mm dia (TATA Medium) |
| 43 | b) 20 mm dia (TATA Medium) |
| 44 | Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg. per sqm. ( for water line only ) A) 25 mm dia |
| 45 | B) 20 mm dia |
| 46 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. |
| 47 | Supplying, fitting, fixing Closet seat of approved make with lid and C.P. hinges,rubber buffer and brass screws complete . |
| 48 | Supplying , fitting and fixing Flat back Urinal (Half stall Urinal ) in white vitreous chinaware of approved make supplied,fitted and fixed in position with brass screw on 75 mm x 75 mm x 75 mm wooden block complete |
| 49 | Supplying , fitting and fixing Porcelain partition wall of approved make of size 618 mm x 310 mm complete in all respect |
| 50 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). |
| 51 | Supplying, fitting, fixing Chromium plated round shower with revolving joints 100 mm dia with rubid cleaning system ( Equivalent to code No.542 ( N )& Model- Tropical / Sumthing special of ESSCO or similar brand ) |
| 52 | Supplying, fitting, fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C.fittings complete,C.I. brackets including two coats of painting to brackets etc. |
| 53 | S/F/FChromium plated Bib Cock short body ( Equivalent to code No.511 & Model- Tropical /Sumthing special of ESSCO or similar brand ) |
| 54 | S/F/F Chromium plated Stop Cock ( Equivalent to code No.513(A) & 513(B) &Model-Tropical/Sumthing special of ESSCO or similar brand ) |
| 55 | Chromium plated Angular Stop Cock with wall flange ( Equivalent to code No.5053 & Model-Tropical/Sumthing special of Florentine of Jaquar or similar brand ) |
| 56 | Supplying of UPVC pipes (B Type )& fittings conforming to IS 13592-1992A) ( i )Single Socketed 3 meter Length (i) 110 m |
| 57 | ii) 110 mm dia bend |
| 58 | (iii) 110 mm dia tee |
| 59 | Labour for fitting and fixingU.P.V.C pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work if necessary , but including the cost and fitting and fixing holder bat clamps ( any floor ) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the E.I.C. (Payment will be made on cetre line measurement of the total pipeline including specials.) i)110 mm. dia pipe , |
| 60 | S/F/F best quality Indian make mirror 5.5 mm. thick silver red as per I.S.3438/1965 together with brass C.P. hinges |
| 61 | S/F/F porcelain soap tray of approved make |
| 62 | Supplying, fitting, fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm. x75 mm. wooden blocks, C.P.waste fittings of 32 mm. dia,one approved quality brass C.P. pillar cock of 15 mm. dia C.P.chain with rubber plug of 30 mm. dia ,approved quality P.V.C. waste pipe with C.P.nut 32 mm. dia.,900 mm. long approved quality P.V.C. connection pipe with heavy brass C.P.nut including mending good all damages and painting the brackets with two coats of approved paint. a ) 550 mm.x 400 mm. size |
| 63 | S/F/F Towel rail with two brackets.a ) 25 mm dia and 600 mm long |
| 64 | Supplying, fitting, fixing Aluminium domical grating (a)100 mm |
| 65 | Construction of Inspect Pit of inside measurement 600 mm X 600 mm X upto 600 mm (depth)with 250 mm thick at 1st class brick work in cement mortar (6:1) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (6:3:1) with jhama khoa over a layer of jhama brick flat soling, 12 mm thick (4:1) cement plaster to insidewalls and out-side walls upto GL and 20 mm thick (4:1) plaster to bottom of the pit, providing necessary invert with cement concrete (4:2:1) with jhama chips as per direction, neat cement finishing to entire internal surfaces, top of the pit cover with 100 mm thick RCC slab (4:2:1) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (4:1) in all external surface of the slab & ne 560 mm dia RCC manhole cover of approved makes supplied fitted & fixed in the slab with necessary fitings, necessary earth work in excavation in all sorts of soil, filling sides of pit with earth and removing spoils after work complete in all respect. with pakur variety / TATA / SAIL / RINL |
| 66 | Construction of septic tank of different capacities as per approved drawing with Ist class brick work in cement mortar (4:1) including two 560 mm dia RCC manhole cover of approved make supplied, fitted and fixed in the top slab with necessary fittings, 19 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 12 mm thick cement plaster (4:1) to outside wall upto 200 mm below GL floor finished with 25 mm hick grey artificial stone including supplying, fittings and fixing all necessary specials, fittings, SW tees, CI foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, filling up the chabmer with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as per directionof Engineer-in-charge. / TATA/SAIL/RINL |
| 67 | Construction of circular soak well 2.5 metre deep in all types of sandy soil with dry brick work upto 1.6 metre from the bottom having150 mm intermediate cement brick work (6:1) band all around and cement brick work (6:1) upto 0.90 metre from top with 19 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 12 mm thick cement plaster (4:1) on outer face from top of the wall upto GL and 6 mm thick cement plaster (4:1) on top of the RCC cover slab including filling bottom 1.00 metre of inside of the well with brick metal ( 50 mm to 63 mm size) including RCC cover slab of designed thickness with cement Concrete (4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia RCC manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the excess eatth from the premises as per direction complete in all respect with all costs of labour & materials.With 250 mm. thick dry brick work and 250 mm. thick cement brick work (6:1) and 1.00 metre inside dia./ TATA/SAIL/RINL |
| 68 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixedwith the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer?s specification and direction of Engineer-in-Charge.. |
| 69 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesiveetc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. |
| 70 | Applying decorative cement based paint of approved quality including cleaning the surface including scraping the same thorougly ( plastered or concrete surface ) as per manufacturer\"s specification / Two coats. |
| 71 | Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etcOn Steel Surface. |
| 72 | Painting with best quality Synthetic Enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface if necessary.On steel or other metalled surface with Super Gloss (Hi-gloss), Two coats (with any shade except white). |
| 73 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc.complete. |
| 74 | Sub Total |
| 75 | GST 12% |
| 76 | CESS 1% |
AI Tender Summary
Tender Timeline
Apr 21, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 29, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender