Additional Alteration / Renovation Of Veterinary Under ( Esvhd ) At Nihri Distt. Mandi ( Hp ) .
Tender Value
7.20 Lakhs
Estimated cost
Bid Submission
18 Apr 2022
0 days left
EMD
14400
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nihri → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Additional Alteration / Renovation Of Veterinary Under ( Esvhd ) At Nihri Distt. Mandi ( Hp ) .
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement conc. Manually/ by mechnically means i/c disposal of meterial with in 50mtr lead as per direction of Engineer in-charge |
| 2 | Providing & laying cement concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 3 | Providing and fixing 10mm thick antiskid waterproof stain and impact resistant heavy dutyvitrified tiles600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 4 | P/L Spartic Ceramic tiles mm.thick in flooring (300X300mm. Size) treads of steps laid on a bed of 12mm. Thick cement mortar 1:3(1 cement:3 sand) finished with flush pointing in white cement.IS:15622 |
| 5 | Repair to pilaster in patches of 2.50 Sqm and under and 10 TO 15 mm thick i/c cutting the patch in proper shapeand repilastering the surface of the wall i/c disposal of rubbish to the dumping ground with in a lead of 20mtr. In CM 1:4 |
| 6 | Dismentling old pilaster or skirting raking out joints and cleaning the surface for plaster i/c disposal of rubbish to the dumping ground with in 50 mtr |
| 7 | 15mm cement plaster in singale coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 8 | Appling birla white wall care putty over plaster surface after thoroughly brushing the surfacefree from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. |
| 9 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. |
| 10 | Providing and fixing in position collapsible shutter with vertical channel 20x10x2mm and braced with flat iron daigonal 20x5mm size with top and bottom rail of T iron 40x40x6mm with 38mm dia steel pulley complete with bolts and nuts and locking arrangement stopper handle including applying primer coat of red lead paint. |
| 11 | Providing corrugated G.S roofing i/c vertical/ curved surface fixed with ploymer coated J or L hocks bolts and nuts 8mm dai with bitumen and GI limpet washer or with GI limpet washer filled with white lead i/c a coated of approved steel primer and two coats of approved paint on overlapping of sheet complete ( up to any pitch in horizental / vertical or curved surface s) excluding the cost of purlins , rafters and trusses and i/c cutting to size and shape wherever required 0.80mm thick with zinc coatednot less than 275gm/ Sqmtop of roof |
| 12 | Providing ridges or hips of width 60cm over all width plain GS sheet fixed with polymer coated J,L hooks bolts and nuts 8mm washerbitumen complete |
| 13 | Providing wood work in frames of false celling partition etc. swan and fixed in position with necessary stainless screws |
| 14 | P/F 12mm thick prelaminated board both side bwp phenol bonded exterior/ interior grade shutter with frame of !st class deodar wood for cup board i/c nuckel plated bright finished piano hinges 25mm thick frame |
| 15 | Pointing on stone work with cement mortar 1:3( 1 cement:3sand) flush/ruled pointing |
| 16 | Providing wood work in frames of door windows and clearstory windows and other frame work with hold fast lugs or with dash fasterner and required dia |
| 17 | Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 35mm thick 2nd Class teak Wood. |
| 18 | Providing & fixing aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete(i) 300mm x 16mm. |
| 19 | Providing and fixing aluminium tower bolts (barrel type )anodized transparent or dyed to required shade & colour.(a)200 x 10mm |
| 20 | Prooviding and fixing aluminium finshed brass handles with nuts and secrews etc complete. (a) 125mm. |
| 21 | Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. |
| 22 | Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. |
| 23 | Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 24 | P/L PVCpipe jointed with approved adhesive 110mm dia |
| 25 | (b)75mm dia |
| 26 | Providing and fixing water closet squatting pan ( Indian typeWC pan ) with 100 mm sand cast iron P or S trap 10liter iow level white PVC flushing cistern i/c flush pipe with manually controlled device (handle lever) i/c cutting and making good the wall and floor wher ever required .(Orrissa pattern). |
| 27 | Providing and fixing to wall ceiling and floor G.I. pipe(Heavy Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor |
| 28 | Providing and fixingG.I. unions. 15mm dia. |
| 29 | Providing and fixing PVC connection. |
| 30 | Providing & fiixng PVC waste pipe for wash basin or sink 32mm dia. |
| 31 | Providing & fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia. |
| 32 | Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap. |
| 33 | Providing & fixing C.P stap cocks 15mm dia. |
| 34 | Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make). |
| 35 | Providing & fixing C.P. pillar tap with capaston head. 15mm dia. |
| 36 | P/F stainless steel kitchen sink of ISI make with drain board & C.P. Waste with C.I. Or M.S. Brackets painted with i/c cutting holes etc. 610mm x 460mm with bowl depth 200mm. |
| 37 | Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality. |
| 38 | Single equal branch of requireddegree with oval access door, insertion rubber washer 3mm thick nut and bolt complete. 100 mm dia. |
| 39 | b) 75mm |
| 40 | P/F PVC plain bend ISI marked i/c fixing with approved adhesive etc.complete (Finolex Type-B)i)110mm dia. |
| 41 | b) 75mm |
| 42 | P/F PVC collors ISI markes i/cfixing with approved adhesive etc. complete 100mm |
| 43 | b) 75mm |
| 44 | Providing and fixing PVC water storage tank. 1000 ltrs. Capacity with all necessary fittings. |
| 45 | P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws. |
| 46 | Providing and fixing brass full way valve with wheel 15mm dia |
| 47 | P/F vetrius china wash basin with single holes piller tap with CI or MS bracketpainted white i/c cutting holes amd making good the same but excluding fittings flat back 630x450mm |
| 48 | P/F brass towel rail with C.P. brass brckets fixed to wooden cleats with C.P. brass screws. |
| 49 | Excavation work by mechnical means ( Hydraulic excavation manual means in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto all leads and lifts. |
| 50 | Providing & laying cement concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 51 | Random rubble/ploygonal rubble(uncoursed/ brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand) in foundation and plinth. for toe wall |
| 52 | P/L heavy60mm thick factory made cement conc.precast cement conc. Interlock ing paver block M-30grade made by block making machine with strong vibrating compection of approved size design & shape laid in required colour and pattern over and i/c 50mm thick compected bed of coarse sand filling the joints with line sand etc. all complete as per the direction -in-charge |
| 53 | Dismentling roofing ridge hips GS sheet |
| 54 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
AI Tender Summary
Tender Timeline
Apr 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender