Haryana Police Housing Corporation Limited has published Renovation / Repair Of Toilet In 5 Barracks, Hospital, Langer Hall, Female Ward, Juvenile Ward, Chakki And Factory Etc. In Distt. Jail Kurukeshtra Renovation / Repair Of Toilet In 5 Barracks, Hospital, Langer Hall, Female Ward, Juvenile Ward,. Submission Date for this Tender is 25-04-2022. Toilet Bathroom Tenders in kurukshetra Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Apr-2022 | Corrigendum_Date | Date | 25-04-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: (HSR 5.29) |
| 2 | Of area 3 sq. metres and below (HSR 5.29.1) |
| 3 | Dismantling cement conglomerate / terrazzo floors 25 mm to 50mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. (HSR 5.42) |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (HSR 5.44) |
| 5 | Dismantling old plaster or skirting raking out joints and cleaningthe surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (HSR 5.45) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 6.1) |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) (HSR 6.1.2) |
| 8 | 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6) |
| 9 | Centering and shuttering including strutting, propping etc. And removal of form work for : (HSR 6.29) |
| 10 | Foundations, footings, bases for columns (HSR 6.29.1) |
| 11 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (HSR 9.57) |
| 12 | 110 mm diameter (HSR 9.57.2) |
| 13 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. (HSR 9.58) |
| 14 | Bend 87.5° (HSR 9.58.5) |
| 15 | 110 mm bend (HSR 9.58.5.2) |
| 16 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : (HSR 10.37) |
| 17 | 25 mm thick (HSR 10.37.1) |
| 18 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : (HSR 10.38) |
| 19 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (HSR 10.59) |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.62) |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(HSR 10.60) |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (HSR 10.64) |
| 23 | New work (two or more coats) over and including water thinnable priming coat with cement primer (HSR 10.64.1) |
| 24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: (HSR 10.67) |
| 25 | Water thinnable cement primer (HSR 10.67.1) |
| 26 | Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : (HSR 10.71) |
| 27 | Two or more coats on new work (HSR 10.71.1) |
| 28 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 10.76) |
| 29 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 10.77) |
| 30 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 10.78) |
| 31 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37) |
| 32 | 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (HSR 12.37.1) |
| 33 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3) |
| 34 | Profile C (HSR 13.3.2) |
| 35 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.3.2.2) |
| 36 | Lowering plain and reinforced concrete pipes and specials into trenches for all depths and laying out the same to correct alignment gradients levels etc., including all dressing and trimming and cutting of concrete beds and joint holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching haunches and envelope are completed. The pipes shall rest on the beds at all points throughout their lengths and to ensure this they shall be grouted in where necessary as described in item no.21.38 including carriage from the stores of the Engineer-in-charge and safe delivery thereof at site of works. This includes, loading, unloading, stacking at convenient points adjacent to the works ready for lowering as may be found most convenient in the interest of work. (For NPI or NP2 and NP3 or NP4 pipes) (HSR 21.44) |
| 37 | 450 mm internal diametre of sewer(HSR 21.44.9) |
| 38 | NP1 or NP2 Pipe (HSR 21.44.9.1) |
| 39 | Removing white or colour wash by scrapping and sand paperingand preparing the surface smooth including necessary repairs to scratches etc. complete (HSR 30.21) |
| 40 | Civil HSR Total |
| 41 | PH HSR |
| 42 | R.C.C. pipes NP2 class 450 mm dia (HSR-Ch. 2/B-1212) |
| 43 | Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge).(HSR 22.8) |
| 44 | Tow way (HSR 22.8.2) |
| 45 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required(HSR 22.10) |
| 46 | Kitchen sink without drain board (HSR 22.10.2) |
| 47 | 610x510 mm bowl depth 200 mm (HSR 22.10.2.1) |
| 48 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (HSR 22.14) |
| 49 | Semi rigid pipe (HSR 22.14.1) |
| 50 | 32 mm dia (HSR 22.14.1.1) |
| 51 | 40 mm dia(HSR 22.14.1.2) |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (HSR 22.85) |
| 53 | 20 mm nominal outer dia Pipes (HSR 22.85.2) |
| 54 | 32 mm nominal outer dia Pipes (HSR 22.85.4) |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (HSR 22.86) |
| 56 | 20 mm nominal outer dia Pipes (HSR 22.86.2) |
| 57 | 32 mm nominal outer dia Pipes (HSR 22.86.4) |
| 58 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (HSR 22.94) |
| 59 | 20 mm nominal outer dia Pipes (HSR 22.94.2) |
| 60 | 32 mm nominal outer dia Pipes (HSR 22.94.4) |
| 61 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): (HSR 22.98) |
| 62 | 20 mm nominal outer dia Pipes (HSR 22.98.2) |
| 63 | 32 mm nominal outer dia Pipes (HSR 22.98.3) |
| 64 | Providing and fixing Unplasticised PVC connection pipe with brass unions: (HSR 22.101) |
| 65 | 30 cm length (HSR 22.101.1) |
| 66 | 15 mm nominal bore (HSR 22.101.1.1) |
| 67 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (HSR 22.104) |
| 68 | 15 mm nominal bore (HSR 22.104.1) |
| 69 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (HSR 22.105) |
| 70 | 15 mm nominal bore (HSR 22.105.1) |
| 71 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (HSR 22.107) |
| 72 | 15 mm nominal bore (HSR 22.107.1) |
| 73 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (HSR 22.108) |
| 74 | 15 mm nominal bore (HSR 22.108.1) |
| 75 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (HSR 22.109) |
| 76 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181) |
| 77 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. (HSR 30.86) |
| 78 | PH HSR Total |
| 79 | NS Part |
| 80 | P/F S.S. WC pan of approved make having size 585x480mm flushing made from ISI 304 (1818) Grade having glossy finished with 100mm outlet and flash cock complete in all rspect (NS) |
| 81 | P/F EWC wall hung/floor mounted WC seat of stainless steel as per ISO 9001:2008 certified including flush cock seat cover, jet spray complete in all respect. (NS) |
| 82 | Supply and Fixing S.S. Urinal complete in all respect (NS) |
| 83 | P/F S.S. Wash Basin of grade 304 approved make size 530x380mm complete in all respect. (NS) |
| 84 | SWR Pipe (NS) |
| 85 | 90mm dia |
| 86 | 110mm dia |
| 87 | SWR Fitting (NS) |
| 88 | 90mm dia |
| 89 | Bend |
| 90 | Socket |
| 91 | Tee Plain/ Junction woth door |
| 92 | Floor Trap |
| 93 | 110mm dia |
| 94 | Bend |
| 95 | Socket |
| 96 | Tee Plain/ Junction woth door |
| 97 | P-Trap |
| 98 | Dismanteling of Indian WC (NS) |
| 99 | P/F CP Brass Flange of required dia as per (NS) |
| 100 | Providing and fixing S.S. grade 304 urinal partetion plate of approved make complete in all respect (NS) |
| 101 | Cutting chases in brick/concrete wall for providing skirting flush with plaster (NS) |
| 102 | NS Part Total |
| 103 | Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. |
| 104 | 12) Bakelite angle/straight button holder large size. |
| 105 | Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. |
| 106 | 4.) 6 Modules |
| 107 | .6) 12 Modules |
| 108 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. |
| 109 | 1) 5 amp. 1 way switch |
| 110 | 4) 5 amp socket |
| 111 | 10) Blinking Plate |
| 112 | Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. |
| 113 | 9) 4 pole MCCB 6 amp to 100 amp , 25 KA |
| 114 | Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. |
| 115 | 10) Vertical TPN DB Double Door 6 way ( 8 incoming 3phase*6 Outgoing) |
| 116 | 12 )Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing |
| 117 | Supply and erection of miniature circuit Breaker 240/415 V in the existingdistribution board including making necessary connections |
| 118 | 5.) 6 amp. to 32 amp Single Pole |
| 119 | 6) 40 amp to 63 amp. MCB"s Tripple POLE |
| 120 | Laying of underground cable in pipe /existing open/closed trench etc as and removing of oldcable (if any) |
| 121 | 3) 50 sqmm to 150 sqmm Cable 2 to 4 Core |
| 122 | Supply and erection of suitable compression type brass cable glands for |
| 123 | 3 ) 25 sqmm to 50 sqmm Cable 2 to 4 Core |
| 124 | Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work |
| 125 | 7) 50sqmm |
| 126 | S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. |
| 127 | 4) DWC/HDPE pipe 90/75 mm outer dialinner dia |
| 128 | Total (HSR) (E.I) |
| 129 | NS items ( Electrical Work) |
| 130 | S/E of PVC pipe "Heavy" ISI marked for wiring purpose i/c PVC bends, hooks,C.I juntion boxes etc. with all other material required to complete the job in all respect upto the entire satisfaction of Engineer in charges of work.(Recessed Type) (NS) |
| 131 | ii) size 25 mm dia |
| 132 | ii) size 25 mm dia (Surface) |
| 133 | Supply and erection of 1.5 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable. Make:- as approved in HPHC Brand list |
| 134 | Supply and erection of 4 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable. Make:- as approved in HPHC Brand list |
| 135 | S/E of surface mounting LED Batten fitting 1x20 watt ( 4 feet long) made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase AC 230 volts, 50 HZ supply complete in all respect.Make as per Brand List Approved by HPHC |
| 136 | S/E of 100 W Flood light mounted under canopy luminaire with IP66 protection suitable for 220 V, 50 Hz supply. Make Crompton as per brand list approved complete in all respect.Make as per Brand List Approved by HPHC |
| 137 | LED 22 W Square Bajaj BZRSQL22WWH or Equivalent or equivalent as per approved Brand list |
| 138 | S/E ofDrinking water cooler, Model SS150/150 Cooling Capacity 150 ltr/Hr, Storage cap 150 ltrs in full SS Body make as per approved brand list of HPHC. |
| 139 | S/E ofRO/UV Water purifier Model-LPH-50 Capacity 50 litrs per hour or make as per approved brand list of HPHC. |
| 140 | Supply of PVC/ XLPE insulated (Heavy Duty ) Electrical cables for working voltage upto 1100 volt to IS: 1554 (PART-1) with Aluminium Conductor- ISI Marked Power Cable- Aluminium Conductor (50 sqmm 4 core armoured). Make - Grandlay or equivalent as per brand list |
| 141 | Supply and Erection 250mm dia PVC body exhaust fan with louver shutter of suitable size for single phase AC 230 volts 50 Hz, 1210 RPM and capacitor run, complete in all respect. (Model - Ventilair DXin Havell"s Make and Brisk AIR inCrompton greaves make) |
| 142 | S/E of Inalsa Hector 90 DHC Chimney/KAFF/Hindware with G.I ducting upto roof. |
| 143 | Total NS |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
