|
| 1 | Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same. |
| 2 | B/R ITEMSTaking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as directed. |
| 3 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal all rubbish material complete all as directed. |
| 4 | Taking up or down 15 mm boresteel tubing and connections, including cleaning for re fixing or removal to store complete all as directed. |
| 5 | S&F 15mm bore steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed(36+840) |
| 6 | Fixing only old 15 mm bore steel tubing and connections in new or old position fixed to Walls, ceiling,or in floor complete all as specified and directedfor following sizes:- |
| 7 | Taking down and refixing of 15mm bore bib tap screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 8 | Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each including cutting holes in brick work for taking out hold fasts and making good to walls and jambs to match with existing finish complete all as specified and directed. |
| 9 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube, In opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010). |
| 10 | S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part–II. |
| 11 | S & F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 12 | S & F 200mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed. |
| 13 | BLANK |
| 14 | S & F 150 mm size cast type Aluminium handles,\"D\" type, anodised ISI marked complete all as specified and directed. |
| 15 | M & L for rendering 15 mm thick on fair faces of brick masonry/ concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M & L for preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed.(61.88+6.9) |
| 17 | M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed. |
| 18 | M & L for glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including rendering 10mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed. |
| 19 | S&F Stainless steel kitchen plate rack of size 610 x 914 x x 254 mm made out of 1 mm thick Stainless steel sheet all as specified and as directed. Make: Prayag Cat part No P-336 |
| 20 | S & F grating doom 100 mm dia of PTMT (minimum weight 25 gms), complete all as specified and directed. |
| 21 | Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth for foundation, laying of cable, pole etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and getting out in any type ofsoil complete all as directed. |
| 22 | M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 23 | S & F for rolled sections of Fe-410 W (Gde E-250)quality \"A\" as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates complete all as specified and directed. |
| 24 | S&F mild steel work of Fe 410-W(Gde E- 250) quality-\"A\" in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 25 | M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coatof red oxide zinc chrome primer complete all as specified anddirected. |
| 26 | S & F for pre-painted galvalume aluminum zinc coating GI based trapizoidal profile steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions complete all as specified and directed. |
| 27 | S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions completed all as specified and directed. |
| 28 | Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point,complete, all as specified and directed . |
| 29 | Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type ofsoilcomplete all as specified and directed. |
| 30 | M & L for 60 mm thickness Machine pressed precast concrete interlocking paver block any shape and size haxagon/ triangular/ zigzag/ I-shaped etc. as directed confirming to IS 15658-2006 of , M-35 Grade, having compressive strength not less than 350 Kg/ Sqcm laid over 25 to 30mm thick layer of sand cushioning including filling the interstices with & including sandand interstices on edges filled with PCC 1:2:4 type B-1 finished even and smooth without using extra cement complete all as directed. Note: Sand for cushioning will be measured and paid separately |
| 31 | Supply and spreading clean and dry sand free from sharp material for laying of interloccking tiles inlcluding watering and consolidation complete all as directed. |
| 32 | E/M ITEMS:Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed. |
| 33 | S & F 15 mm bore stop valve , fancy type, chromium plated,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 34 | S & F 15mm bore bib tap cast copper alloywith crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 35 | S & F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 36 | S&F20 mm bore steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed |
| 37 | S & F for submain wiring with 2 runs of single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 2.5 Sqmm copper multistranded conductor drawn through and including PVC conduit 25mm boreconcealed in walls/ceiling/floors including 2.5 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.Note: - Two runs of main cable, one run of earth continuity conductor and one run of conduit will be measured and paid as one length only.(ii) The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. |
| 38 | S & F switch piano flush type 15/16 Amps, single pole, one way, 230 Volts complete all as specified and directed. |
| 39 | S & F Single pole and neutral enclosure with a two pin and earthplug and socket complete with one single pole MCB of 20 A capacitycomplete all as specified and directed. |
