|
| 1 | Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil. |
| 2 | M&L loose filling red moorum in ground, laid in layers not exc 15cm thick, spread, levelled and watering to required levels, gradient and shapes. |
| 3 | Clearing of the area, removal of weeds, root pebblese etc and refilling the mixture of good soil and organic manure, supply and planting of carpet grass and maintenance for period of 2 months which includes watering, dewatering, instecticide and fungicide as and when required. |
| 4 | Shrubs digging of pits 60cmx60cm and refilling with good soil and organic manure, supply and planting of healthy and grown decorative plants (Arcea palm, bonsai, Ficus, Thuja, Lxora red and pink, Plumeria, cycas, Pheonix etc) with good root system of height three to five feet from GL at the time of planting and maintainence for period of 2 months which includes watering, dewatering, loosening of soil, manuring with manure neem cake, purning and sprying of insecticide when required. |
| 5 | M&L precast cement concrete block masnory type C1 1:3:6 (using 20mm graded aggregate) with soil blocks, exc. 10 cm in width and setting in mortar 1:6 complete. |
| 6 | M&L for rendering 15mm thick on concrete surfaces in cement mortar 1:4 finished fair and even. |
| 7 | M&L for preparing new surfaces plastered or unplastered of walls and applying two coats of cement base paint any shade as approved all as directed and specified. |
| 8 | M&L for framed work such as grills, gratings etc, with ends bars shouldered and / or riveted or forged in to spikes, framed work of water tanks and similar work conforming to Fe-290 Gde-165. |
| 9 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 10 | M&L for Granite stone slab colour as directed, 20mm thick machine cut as in skirting/ dado bedder and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 10mm thick rendering in CM 1:3 complete all as specified and as directed. |
| 11 | Excavation in trenches, n.exc 1.5m wide and n.exc 1.5 m deep and getting out hard/dense soil. |
| 12 | Removing excavated soil to a distance exc 100 m but n.exc 250m and depositing where directed at level n exc 1.5 mtr above starting point all as specified and directed. |
| 13 | Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil. |
| 14 | M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations fillings and mass concrete |
| 15 | M&L for Granite stone slab in flooring 20mm thick machinecut including edges, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 20mm thick screed bed bedding in CM 1:4 complete all as specified and as directed. |
| 16 | S&F Stainless steel lettering of 200 to 300 mm height, 50mm wide and 25mm thick out with not less than 2mm thick SS sheet fixed on to Granite/ masonry wall using adhesives or by screwing all as per directions. |
| 17 | S&F stainless steel (Grade-304) railing made of hollow tubes, channels plates, chains etc including welding, polishing and making curvature and fitting the same with stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolt etc of required size. |
| 18 | M&L for had core of gauge exc 63mm but n.exc 75mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled with power driven road roller 8-10 tonnes capacity to required gradient and slope to a true surface all as directed. |
| 19 | M&L for 75mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in subbase of flooring. |
| 20 | M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in subbase of flooring. |
| 21 | M&L for 100mm thick PCC 1:4:8 type D2 as in sub base |
| 22 | M&L for 150mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregates) as in pavements / Hardstanding fair finished and even including necessary steel formwork to edges complete all as specified. |
| 23 | Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade B |
| 24 | M&L for painting lines dashes, arrows, letters etc on road pavement and the like with adequate number of coats and not exceeding 10 cm in width using water based road marking paint applied by mechanical means including preparation of surfaces. |
| 25 | M&L for Glossy chequered cement concrete tile 20cmx20cmx25cm thick, set, jointed and pointed in near cement slurry in floors over 15mm thick screed bed in CM 1:6 |
| 26 | S&F powdercoated aluminium frame for doors windows ventilator with one or more rebates including joining cleat for fixing etc complete shall as specified. |
| 27 | Construction of Incinerator complete as per drawings TD No.CE/TD/366 dated 15 Jun 2005 |
| 28 | S&F Joist, channel, angle, tube or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e within 20mm of the length indicated) |
| 29 | Plate (plain or chequered) channels.Square cut or notched (ordinary and counter sunk) forming holes, without any attachment |
| 30 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 31 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface. |
| 32 | Cement concrete in foundations, filling in and mass-concrete Type D2 1:4:8 (40mm graded aggregate) |
| 33 | M&L 12mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber frame/aluminium frame. |
| 34 | Sheet glass 5.5 mm thick, selected quality and glazing with oil putty in squares exc 0.5 sqm in each pane. |
