Design, Engineering, Procurement, Construction, And Development Of New Panchayat Bhawan And Smart School With Ict Components (After Dismantling) At Sonbarsa Village, In Distt. Gorakhpur, Uttar Pradesh As Per Tender Documents.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Apr 2022
0 days left
EMD
6.36 Lakhs
Bank guarantee accepted
Document Fee
3920
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sonbarsa → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Design, Engineering, Procurement, Construction, And Development Of New Panchayat Bhawan And Smart School With Ict Components (After Dismantling) At Sonbarsa Village, In Distt. Gorakhpur, Uttar Pradesh As Per Tender Documents.
BOQ
| Sl. No. | Item Description |
| 1 | School Building -Earth Work |
| 2 | Excavationin foundation in ordinary soil (loam clay or sand) including lift upto 1.5 m. & lead upto 30 m. Including filling, watering& ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenvhes or in to the plinth removal & disposal of surplus earth as directed by Engineer-in-chargeupto a distance of 30m from the foundation trenches.(excluding royalty) |
| 3 | All kinds of soil |
| 4 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 5 | All kinds of soil |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. |
| 7 | By Mechanical Transport including loading,unloading and stackingBy Mechanical Transport including loading,unloading and stacking |
| 8 | Excavated Earth |
| 9 | Earth5 KM lead |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 11 | 1:11/2:3 (1 Cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 14 | Columns, pillars, peir, abutment, post & struts |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 16 | Suspended floors, roofs, landings, balconies and access platform |
| 17 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 18 | All work up to Plinth level |
| 19 | Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 20 | All work above Plinth level up to floor V level |
| 21 | Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level & above plinth level. |
| 23 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 24 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 25 | Brick work with(non modular)fly ash lime bricks (Flag Bricks) conforming to IS :12894, class designation 10 averages compressive strength in superstructure. |
| 26 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 27 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 28 | Second class teak wood |
| 29 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 30 | Second class teak wood |
| 31 | Providing andfixingaluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriateZsectionsand othersections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or withfixingclips,orwithexpansionhold fasteners including necessary filling up ofgaps at junctions,at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing and paneling to be paid for separately) : Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 32 | All as above items but For shutters of doors, windows & ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Anodised aluminium(anodised transparent or dyed to required shade according to IS:1868,Minimum anodic coating of grade AC15) Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 33 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness |
| 34 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 35 | 250 x 16 mm |
| 36 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 37 | 250 x 10 mm (9.63.1) |
| 38 | Providing and fixing ISI marked oxidised M.S door latches conforming to IS: 5930 with screws etc., complete: |
| 39 | 250 x 20 x 6 mm |
| 40 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Kg., for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 41 | With brass cover plate minimum 1.25 mm thickness |
| 42 | School Building -Finishing |
| 43 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 44 | 15 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 45 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) for soffit of beam ,slab ,ceiling etc. |
| 46 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. |
| 47 | Finishing wall with Acrylic interior emulsionpaint of approved quality on new surface including two or more coats including primer coat |
| 48 | New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 49 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete. |
| 50 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 51 | Laying of 25 mm thick Kota stone of size 45X 45cm and above flooring over Previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the direction of E/I including cutting polishing with wax polish including supply of all material T&P etc. required for proper completion of work. |
| 52 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 Cement : 3 Coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consoildated and grouted with fine sand including finishing the top smooth. |
| 53 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 54 | Providing and fixing sheet covering over expansion joints with iron screwsas per design. |
| 55 | Aluminium fluted strips 3.15mm thick. |
| 56 | 150 mm wide. |
| 57 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. |
| 58 | Providing Gola 75 x 75 mm in cement concrete 1 : 2 : 4 (1 Cement : 2 Coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with Cement mortar 1 : 3 (1 Cement : 3 fine sand) as per standard design : |
| 59 | In 75 x 75 mm deep chase |
| 60 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 61 | Providing and fixing 100 mm dia metre and 60 cm long rain water spout in cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 62 | Stoneware spout |
| 63 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 64 | Single socketed pipes. |
| 65 | 110mm diameter |
| 66 | Providing and fixing on wall faced unplasticised PVC moulded fitting / accessories for unplasticised - Rigid PVC rain water pipe conforming to IS : 13592 Type A including joiniting with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 67 | Single push fit coupler |
| 68 | 110 mm Single push fit coupler |
| 69 | Single Tee with door |
| 70 | 110 x 110 x 110mm Single Tee with door |
| 71 | Bend 87.5 degree |
| 72 | 110mm bend |
| 73 | Shoe (Plain) |
| 74 | 110mm shoe |
| 75 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipe by means of 50 x 50 x 50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. |
| 76 | 110mm |
| 77 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 78 | School Building -Site Development Work |
| 79 | Providingandlayingfactory made 60mmthickrubber moulded interlocking cement concrete tiles (30mpa) including 25 mm thick compacted bed of fine sand compacting and propper embedding/ laying of interlocking tiles levelling and dressing of surfaces to required level and slope, filling joints with fine sand, including cost of material, cost, T&P etc. required for proper completion of work as directed by Engineer-In -Charge. |
| 80 | Providing and laying at or near ground level factorymadekerbstoneofM-25grade cement concrete in positionto the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3coarsesand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge(lengthof finishedkerb edgingshallbemeasuredforpayment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge). |
| 81 | Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing andconstruction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III).LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usageof Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for betterstructural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelizedor knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the membersshall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above |
| 82 | School Building -Horticulture |
| 83 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 84 | Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 85 | Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 86 | School Building -Ground Cover |
| 87 | Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge. |
| 88 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) |
| 89 | School Building -Plumbing works |
| 90 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:. |
| 91 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 92 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 93 | One Litre urinal basin with 5 litre white P.V.C automatic flushing cistern |
| 94 | Providing and fixing white vitreous china wash basin including making all connections but excludein gthe cost of fittings. |
| 95 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 96 | 40 mm dia (Flexible pipe) |
| 97 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 98 | Providing and fixing toilet paper holder 17.34.1 C.P. Brass |
| 99 | Providing and fixing C.P. brass bib cock of approvedquality confirming to IS : 8931 |
| 100 | 15mm dia nominal bore |
| 101 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 102 | 15 mm nominal bore |
| 103 | Providing and fixingC.P brass angle valvefor basin mixer and geyser points of approved quality confirming to IS:8931 |
| 104 | 15 mm nominal bore |
| 105 | Providing and fixing soil, waste and vent pipes : |
| 106 | 100 mm dia |
| 107 | Sand cast iron S&S pipe as per IS: 1729 |
| 108 | Construction of septic tank of standard size 2.3mx1.10mx1.80m for 20 persons capable of cleaning once in 2 years with seepage pit of size 2.5mx3.4m (including free board) including earth work excavation, concrete 1:2:4 mix,brick work in C.M.1:5 baffle wall, R.C.C. removable slab, plastering with C.M. 1:3 12mm thick with necessary ventilating Column 75mm dia, stoneware pipe and Tees of 100mm dia, etc., complete (M.D.53). |
| 109 | School Building - Electrical (Gorund Floor Class room-1) |
| 110 | Supply and Laying of Electrical Items |
| 111 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 112 | Casing & Capping |
| 113 | Switches- Crabtree |
| 114 | Socket - Crabtree |
| 115 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 116 | FAN - Celing (48 Inch High Speed) |
| 117 | FAN Requlator- Crabtree High Speed |
| 118 | Labour Charge |
| 119 | School Building - Electrical (Gorund Floor Class room-2) |
| 120 | Supply and Laying of Electrical Items |
| 121 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 122 | Casing & Capping |
| 123 | Switches- Crabtree |
| 124 | Socket - Crabtree |
| 125 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 126 | FAN - Celing (48 Inch High Speed) |
| 127 | FAN Requlator- Crabtree High Speed |
| 128 | Labour Charge |
| 129 | School Building - Electrical (Gorund Floor Class room-3) |
| 130 | Supply and Laying of Electrical Items |
| 131 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 132 | Casing & Capping |
| 133 | Switches- Crabtree |
| 134 | Socket - Crabtree |
| 135 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 136 | FAN - Celing (48 Inch High Speed) |
| 137 | FAN Requlator- Crabtree High Speed |
| 138 | Labour Charge |
| 139 | School Building - Electrical (First Floor Class room-1) |
| 140 | Supply and Laying of Electrical Items |
| 141 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 142 | Casing & Capping |
| 143 | Switches- Crabtree |
| 144 | Socket - Crabtree |
| 145 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 146 | FAN - Celing (48 Inch High Speed) |
| 147 | FAN Requlator- Crabtree High Speed |
| 148 | Labour Charge |
| 149 | School Building - Electrical (First Floor Class room-2) |
| 150 | Supply and Laying of Electrical Items |
| 151 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 152 | Casing & Capping |
| 153 | Switches- Crabtree |
| 154 | Socket - Crabtree |
| 155 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 156 | FAN - Celing (48 Inch High Speed) |
| 157 | FAN Requlator- Crabtree High Speed |
| 158 | Labour Charge |
| 159 | School Building - Electrical (First Floor Class room-3) |
| 160 | Supply and Laying of Electrical Items |
| 161 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 162 | Casing & Capping |
| 163 | Switches- Crabtree |
| 164 | Socket - Crabtree |
| 165 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 166 | FAN - Celing (48 Inch High Speed) |
| 167 | FAN Requlator- Crabtree High Speed |
| 168 | Labour Charge |
| 169 | School Building - Electrical (Toilet Male -Female) |
| 170 | Supply and Laying of Electrical Items |
| 171 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 172 | Casing & Capping |
| 173 | Switches- Crabtree |
| 174 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 175 | Labour Charge |
| 176 | School Building - Electrical (Miscellaneous) |
| 177 | Supply and Laying of Electrical Items |
| 178 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 179 | Casing & Capping |
| 180 | Switches- Crabtree |
| 181 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 182 | Labour Charge |
| 183 | MCB Switch- 20A SP Havells |
| 184 | Main Switch- 63A FP Havells/Schneider, 4P |
| 185 | Distributation Board- Havells |
| 186 | 3C, 16MM Armoured Main Cable- |
| 187 | 2.5 Sq MM Cable- 2 Box |
| 188 | School Building - Furniture Cost |
| 189 | Providing,Supply of 2 seater school bench of size 1200X500X750 mm made up of 18mm thick PLPB board supported on Metal powder coated frame . The frame structure is made up of 1.5 mm thickLegs wth powder coated beamswith front metal modesty complete in all respect with all necessary arrangements. |
| 190 | Providing,Supply of 3 seater school bench of size 1800X500X750 mmmade up of 18mm thick PLPB board supported on Metal powder coated frame . The frame structure is made up of 1.5 mm thickLegs wth powder coated beamswith front metal modesty complete in all respect with all necessary arrangements. |
| 191 | Providing, supplying ofFST table of size 1500X600x750 mm HT supported on Metal powder coated legs & beams made out of 1.2 mm thick CRCA pipe section in dual finish.The beams are connected to legs with the help of aluminium die casted brackets with powder coated finish. The unit is considered with a three drawer mobile pedestal storage unit. The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge bnding is considered as per the design. The wire management is considered with 2 nos Gromet holes on the desktop complete in all respect with all necessary arrangements. |
| 192 | Providing, supplying ofFST table of size 1200X600x750 mm HT supported on Metal powder coated legs & beams made out of 1.2 mm thick CRCA pipe section in dual finish.The beams are connected to legs with the help of aluminium die casted brackets with powder coated finish. The unit is considered with a three drawer mobile pedestal storage unit. The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge bnding is considered as per the design. The wire management is considered with 2 nos Gromet holes on the desktop complete in all respect with all necessary arrangements. |
| 193 | 6 CHAIR MERRY-GO-ROUNDRE-02-MGR.ACTUAL EQUIPMENT SIZE: DIA 6 FT. MINIMUM RECOMMENDED AREA: DIA 12 FT.CHILDREN CAPACITY: 6 CHILDREN |
| 194 | Freight Charge 10 % on Basic Cost |
| 195 | Panchayat Bhawan - Earthwork |
| 196 | Excavationin foundation in ordinary soil (loam clay or sand) including lift upto 1.5 m. & lead upto 30 m. Including filling, watering& ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenvhes or in to the plinth removal & disposal of surplus earth as directed by Engineer-in-chargeupto a distance of 30m from the foundation trenches.(excluding royalty) |
| 197 | All kinds of soil |
| 198 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 199 | All kinds of soil |
| 200 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. |
| 201 | By Mechanical Transport including loading,unloading and stackingBy Mechanical Transport including loading,unloading and stacking |
| 202 | Excavated Earth |
| 203 | Earth5 KM lead |
| 204 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 205 | 1:11/2:3 (1 Cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 206 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 207 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 208 | Columns, pillars, peir, abutment, post & struts |
| 209 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 210 | Suspended floors, roofs, landings, balconies and access platform |
| 211 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 212 | All work up to Plinth level |
| 213 | Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 214 | All work above Plinth level up to floor V level |
| 215 | Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 216 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level & above plinth level. |
| 217 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 218 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 219 | Brick work with(non modular)fly ash lime bricks (Flag Bricks) conforming to IS :12894, class designation 10 averages compressive strength in superstructure. |
| 220 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 221 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 222 | Second class teak wood |
| 223 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 224 | Second class teak wood |
| 225 | Providing andfixingaluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriateZsectionsand othersections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or withfixingclips,orwithexpansionhold fasteners including necessary filling up ofgaps at junctions,at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing and paneling to be paid for separately) : Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 226 | All as above items but For shutters of doors, windows & ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Anodised aluminium(anodised transparent or dyed to required shade according to IS:1868,Minimum anodic coating of grade AC15) Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 227 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness |
| 228 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 229 | 250 x 16 mm |
| 230 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 231 | 250 x 10 mm (9.63.1) |
| 232 | Providing and fixing ISI marked oxidised M.S door latches conforming to IS: 5930 with screws etc., complete: |
| 233 | 250 x 20 x 6 mm |
| 234 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Kg., for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 235 | With brass cover plate minimum 1.25 mm thickness |
| 236 | Finishing |
| 237 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 238 | 15 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 239 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) for soffit of beam ,slab ,ceiling etc. |
| 240 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. |
| 241 | Finishing wall with Acrylic interior emulsionpaint of approved quality on new surface including two or more coats including primer coat |
| 242 | New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 243 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete. |
| 244 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 245 | Laying of 25 mm thick Kota stone of size 45X 45cm and above flooring over Previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the direction of E/I including cutting polishing with wax polish including supply of all material T&P etc. required for proper completion of work. |
| 246 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 Cement : 3 Coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consoildated and grouted with fine sand including finishing the top smooth. |
| 247 | Providing and fixing sheet covering over expansion joints with iron screwsas per design. |
| 248 | Aluminium fluted strips 3.15mm thick. |
| 249 | 150 mm wide. |
| 250 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. |
| 251 | Providing Gola 75 x 75 mm in cement concrete 1 : 2 : 4 (1 Cement : 2 Coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with Cement mortar 1 : 3 (1 Cement : 3 fine sand) as per standard design : |
| 252 | In 75 x 75 mm deep chase |
| 253 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 254 | Providing and fixing 100 mm dia metre and 60 cm long rain water spout in cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 255 | Stoneware spout |
| 256 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 257 | Single socketed pipes. |
| 258 | 110mm diameter |
| 259 | Providing and fixing on wall faced unplasticised PVC moulded fitting / accessories for unplasticised - Rigid PVC rain water pipe conforming to IS : 13592 Type A including joiniting with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 260 | Single push fit coupler |
| 261 | 110 mm Single push fit coupler |
| 262 | Single Tee with door |
| 263 | 110 x 110 x 110mm Single Tee with door |
| 264 | Bend 87.5 degree |
| 265 | 110mm bend |
| 266 | Shoe (Plain) |
| 267 | 110mm shoe |
| 268 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipe by means of 50 x 50 x 50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. |
| 269 | 110mm |
| 270 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 271 | Panchayat Bhawan - Plumbing |
| 272 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:. |
| 273 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 274 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 275 | One Litre urinal basin with 5 litre white P.V.C automatic flushing cistern |
| 276 | Providing and fixing white vitreous china wash basin including making all connections but excludein gthe cost of fittings. |
| 277 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 278 | 40 mm dia (Flexible pipe) |
| 279 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 280 | Providing and fixing toilet paper holder 17.34.1 C.P. Brass |
| 281 | Providing and fixing C.P. brass bib cock of approvedquality confirming to IS : 8931 |
| 282 | 15mm dia nominal bore |
| 283 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 284 | 15 mm nominal bore |
| 285 | Providing and fixingC.P brass angle valvefor basin mixer and geyser points of approved quality confirming to IS:8931 |
| 286 | 15 mm nominal bore |
| 287 | Providing and fixing soil, waste and vent pipes : |
| 288 | 100 mm dia |
| 289 | Sand cast iron S&S pipe as per IS: 1729 |
| 290 | Construction of septic tank of standard size 2.3mx1.10mx1.80m for 20 persons capable of cleaning once in 2 years with seepage pit of size 2.5mx3.4m (including free board) including earth work excavation, concrete 1:2:4 mix,brick work in C.M.1:5 baffle wall, R.C.C. removable slab, plastering with C.M. 1:3 12mm thick with necessary ventilating Column 75mm dia, stoneware pipe and Tees of 100mm dia, etc., complete (M.D.53). |
| 291 | Panchayat Bhawan - Electrical (Pradhan Room) |
| 292 | Supply and Laying of Electrical Items |
| 293 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 294 | Casing & Capping |
| 295 | Switches- Crabtree |
| 296 | Socket - Crabtree |
| 297 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 298 | FAN - Celing (48 Inch High Speed) |
| 299 | FAN Requlator- Crabtree High Speed |
| 300 | Labour Charge |
| 301 | Panchayat Bhawan - Electrical (Meeting Room) |
| 302 | Supply and Laying of Electrical Items |
| 303 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 304 | Casing & Capping |
| 305 | Switches- Crabtree |
| 306 | Socket - Crabtree |
| 307 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 308 | FAN - Celing (48 Inch High Speed |
| 309 | FAN Requlator- Crabtree High Speed |
| 310 | Labour Charge |
| 311 | Panchayat Bhawan - Electrical (Entrance Lobby) |
| 312 | Supply and Laying of Electrical Items |
| 313 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 314 | Casing & Capping |
| 315 | Switches- Crabtree |
| 316 | Socket - Crabtree |
| 317 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 318 | FAN - Celing (48 Inch High Speed) |
| 319 | FAN Requlator- Crabtree High Speed |
| 320 | Labour Charge |
| 321 | Panchayat Bhawan - Electrical (Helath Testing Lab) |
| 322 | Supply and Laying of Electrical Items |
| 323 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 324 | Casing & Capping |
| 325 | Switches- Crabtree |
| 326 | Socket - Crabtree |
| 327 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 328 | FAN - Celing (48 Inch High Speed) |
| 329 | FAN Requlator- Crabtree High Speed |
| 330 | Labour Charge |
| 331 | Panchayat Bhawan - Electrical (Doctor Consultation Room) |
| 332 | Supply and Laying of Electrical Items |
| 333 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 334 | Casing & Capping |
| 335 | Switches- Crabtree |
| 336 | Socket - Crabtree |
| 337 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 338 | FAN - Celing (48 Inch High Speed) |
| 339 | FAN Requlator- Crabtree High Speed |
| 340 | Labour Charge |
| 341 | Panchayat Bhawan - Electrical (Training Centre Room) |
| 342 | Supply and Laying of Electrical Items |
| 343 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 344 | Casing & Capping |
| 345 | Switches- Crabtree |
| 346 | Socket - Crabtree |
| 347 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 348 | FAN - Celing (48 Inch High Speed) |
| 349 | FAN Requlator- Crabtree High Speed |
| 350 | Labour Charge |
| 351 | Panchayat Bhawan - Electrical (Record Room) |
| 352 | Supply and Laying of Electrical Items |
| 353 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 354 | Casing & Capping |
| 355 | Switches- Crabtree |
| 356 | Socket - Crabtree |
| 357 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 358 | FAN - Celing (48 Inch High Speed) |
| 359 | FAN Requlator- Crabtree High Speed |
| 360 | Labour Charge |
| 361 | Panchayat Bhawan - Electrical (Store) |
| 362 | Supply and Laying of Electrical Items |
| 363 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 364 | Casing & Capping |
| 365 | Switches- Crabtree |
| 366 | Socket - Crabtree |
| 367 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 368 | FAN - Celing (48 Inch High Speed) |
| 369 | FAN Requlator- Crabtree High Speed |
| 370 | Labour Charge |
| 371 | Panchayat Bhawan - Electrical (MEP Services) |
| 372 | Supply and Laying of Electrical Items |
| 373 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 374 | Casing & Capping |
| 375 | Switches- Crabtree |
| 376 | Socket - Crabtree |
| 377 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 378 | FAN - Celing (48 Inch High Speed) |
| 379 | FAN Requlator- Crabtree High Speed |
| 380 | Labour Charge |
| 381 | Panchayat Bhawan - Electrical (Toilet Male -Female) |
| 382 | Supply and Laying of Electrical Items |
| 383 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 384 | Casing & Capping |
| 385 | Switches- Crabtree |
| 386 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 387 | Labour Charge |
| 388 | Panchayat Bhawan - Electrical (Community Information Centre) |
| 389 | Supply and Laying of Electrical Items |
| 390 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 391 | Casing & Capping |
| 392 | Switches- Crabtree |
| 393 | Socket - Crabtree |
| 394 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 395 | FAN - Celing (48 Inch High Speed) |
| 396 | FAN Requlator- Crabtree High Speed |
| 397 | Labour Charge |
| 398 | Panchayat Bhawan - Electrical (Soil Testing Lab) |
| 399 | Supply and Laying of Electrical Items |
| 400 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 401 | Casing & Capping |
| 402 | Switches- Crabtree |
| 403 | Socket - Crabtree |
| 404 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 405 | FAN - Celing (48 Inch High Speed) |
| 406 | FAN Requlator- Crabtree High Speed |
| 407 | Labour Charge |
| 408 | Panchayat Bhawan - Electrical (Agri Expert Consultation) |
| 409 | Supply and Laying of Electrical Items |
| 410 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 411 | Casing & Capping |
| 412 | Switches- Crabtree |
| 413 | Socket - Crabtree |
| 414 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 415 | FAN - Celing (48 Inch High Speed) |
| 416 | FAN Requlator- Crabtree High Speed |
| 417 | Labour Charge |
| 418 | Panchayat Bhawan - Electrical (Miscellaneous) |
| 419 | Supply and Laying of Electrical Items |
| 420 | 1.5 sq mm cable (Havels/KEI/Polycab) |
| 421 | Casing & Capping |
| 422 | Switches- Crabtree |
| 423 | 30 W LED Light - Tube light (Phillips/Havels/Wipro) |
| 424 | Labour Charge |
| 425 | MCB Switch- 20A SP Havells |
| 426 | Main Switch- 63A FP Havells/Schneider, 4P |
| 427 | Distributation Board- Havells |
| 428 | 3C, 16MM Armoured Main Cable- |
| 429 | 2.5 Sq MM Cable- 2 Box |
| 430 | Panchayat Bhawan - Furniture Cost |
| 431 | Providing, Supplying the Executive table of size 2400X900X750 MM supported on PLPB legs & beams made out of 18/36 mm thick Board with2mm thick edge banding.The modesty panels acts as beams which are connected to legs with the help of Knock down fittings ( Mini fix & dowels ).The unit is considered with side unit .The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge banding is considered as per the design.The side unit is made out of 18mm thick PLPB board having a Three drawer fixed pedestal unit with locks/slides & heavy duty levellors complete in all respect with all necessary arrangements. |
| 432 | Providing,supplying BUDDY-MBEXECUTIVE COMBOS Chrome base with nylon castorsAdjustable handles ( 3D) with PU padCenter tilt mechanism with multi position locking. The tilt has a 1:1 ratio; for every one inch you lean back, the front edge of the seat comes up one inch. 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite. PP Plastic injection seat shells connected by 4 nos of self tapping screws.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PLY frame with High density foam upholstered with Leatherite( PU) Seat - PU LeatherBack - PU Leather Class IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Ply Frame Upholstered\" complete in all respect with all necessary arrangements. |
| 433 | Providing, supplying BUDDY-HB EXECUTIVE COMBOS Chrome base with nylon castorsAdjustable handles ( 3D) with PU padCenter tilt mechanism with multi position locking. The tilt has a 1:1 ratio; for every one inch you lean back, the front edge of the seat comes up one inch. 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite. PP Plastic injection seat shells connected by 4 nos of self tapping screws.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PLY frame with High density foam upholstered with Leatherite( PU) Seat - PU LeatherBack - PU Leather Class IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Ply Frame Upholstered\" complete in all respect with all necessary arrangements. |
| 434 | Providing, Supplying the Meeting table of Size 4500X1200X750 MM supported on structure made out of18mm thick Pre-laminated particle board with 2mm thick edge banding with Knock- down structure joined with MInifixes and dowels having modesty panels and Gables.The table tops are made up of 36mm thick PLPB board with 2mm thick edge banding as per the drawings . The wire management is considered using 1mm thick CRCA powder coated cable trays along with Metal powder coated Flaps with brush . The wires enters from the floor using laminated box which is interconnected with the cable trays for harnessing of wires, The switches are terminated on the cover tray as per the sizes.The Legs are supported on heavy duty levellors for stabilitycomplete in all respect with all necessary arrangements. |
| 435 | Providing, Supplying HYDE-MB MEDIUM BACK CHAIRSNylon base with nylon castorsAdjustable handleswith PU padCenter tilt mechanism with multi position locking. The tilt has a 1:1 ratio; for every one inch you lean back, the front edge of the seat comes up one inch. 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PP Fiber glass filled injection moulded shell and backbone connector connected by using flexible nylon glass filled clip 4mm steel plate insert for the backbone connector reinforcement 6 nos of M6 insert nuts for connection. Seat - Fabric Back - MeshClass IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Black frame complete in all respect with all necessary arrangements. |
| 436 | Providing, supplying Swing door storage unit of size 1800X450X2400 MM is provided with 2 / 3 shutters as per the size of the unit .The carcass is made out of 18mm thick PLPB with both side laminate. The construction of the unit is done in KD fitting for easy installation . The doors are madeup of 18mm thick PLPB with hinges, handles & locks . The Storage unit is provided with Levellors for Height adjustment with the help of levellors . The unit is provided with 50mm thick skirting. The storage unit is also provided with a combination of fixed & adjustable shelfs for file management complete in all respect with all necessary arrangements. |
| 437 | Providing, Supplying HYDE-MB MEDIUM BACK CHAIRSNylon base with nylon castorsAdjustable handleswith PU padCenter tilt mechanism with multi position locking. The tilt has a 1:1 ratio; for every one inch you lean back, the front edge of the seat comes up one inch. 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PP Fiber glass filled injection moulded shell and backbone connector connected by using flexible nylon glass filled clip 4mm steel plate insert for the backbone connector reinforcement 6 nos of M6 insert nuts for connection. Seat - Fabric Back - MeshClass IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Black frame complete in all respect with all necessary arrangements. |
| 438 | Providing, supplying The FST table of size 1200X600X750 MM supported on Metal powder coated legs & beams made out of 1.2 mm thick CRCA pipe section in dual finish.The beams are connected to legs with the help of aluminium die casted brackets with powder coated finish. The unit is considered with a three drawer mobile pedestal storage unit. The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge bnding is considered as per the design. The wire management is considered with 2 nos Gromet holes on the desktop complete in all respect with all necessary arrangements. |
| 439 | Providing, Supplying Swing door storage unit of size 3150X450X2400 MM is provided with 2 / 3 shutters as per the size of the unit .The carcass is made out of 18mm thick PLPB with both side laminate. The construction of the unit is done in KD fitting for easy installation . The doors are madeup of 18mm thick PLPB with hinges, handles & locks . The Storage unit is provided with Levellors for Height adjustment with the help of levellors . The unit is provided with 50mm thick skirting. The storage unit is also provided with a combination of fixed & adjustable shelfs for file management complete in all respect with all necessary arrangements. |
| 440 | Providing, Supplying Swing door storage unit of size 2400X450X2400 MM is provided with 2 / 3 shutters as per the size of the unit .The carcass is made out of 18mm thick PLPB with both side laminate. The construction of the unit is done in KD fitting for easy installation . The doors are madeup of 18mm thick PLPB with hinges, handles & locks . The Storage unit is provided with Levellors for Height adjustment with the help of levellors . The unit is provided with 50mm thick skirting. The storage unit is also provided with a combination of fixed & adjustable shelfs for file management complete in all respect with all necessary arrangements. |
| 441 | Providing, Supplying TRAINING CHAIRSMS powder coatedlegs supported on Frame work Tablet with PP table15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite. PP Plastic injection seat shells connected by 4 nos of self tapping screws.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PLY frame with High density foamSeat - Fabric Back - FabricWith MS powder coated frame\"complete in all respect with all necessary arrangements. |
| 442 | Providing, Supplying The FST table of size 1200X600X750 MM supported on Metal powder coated legs & beams made out of 1.2 mm thick CRCA pipe section in dual finish.The beams are connected to legs with the help of aluminium die casted brackets with powder coated finish. The unit is considered with a three drawer mobile pedestal storage unit. The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge bnding is considered as per the design. The wire management is considered with 2 nos Gromet holes on the desktopcomplete in all respect with all necessary arrangements. |
| 443 | Providing , Supplying the FST table of size 1200X600X750 MM supported on Metal powder coated legs & beams made out of 1.2 mm thick CRCA pipe section in dual finish.The beams are connected to legs with the help of aluminium die casted brackets with powder coated finish. The unit is considered with a three drawer mobile pedestal storage unit. The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge bnding is considered as per the design. The wire management is considered with 2 nos Gromet holes on the desktop complete in all respect with all necessary arrangements. |
| 444 | Providing , Supplying the Executive table of size 1500X900X750 MM considered with SL50 Desking system structure with Side Table of size 1050X450X750 MM . The Legs are made up of 1.5mm thick CRCA Pipe section of size 50mm x 50mm with powdercoated finish upto 50 microns. The Beams are made up of 1.5mm thick CRCA Pipe section of size 40mm x 40mm with powdercoated finish upto 50 microns. The Legs are connected with the Beams with patented Aluminium Die casted connectors . WORKTOPS - are made up of 25mm thick Pre-laminated Particle board with 2mm thick Edge banding on all edges . The wortktops are provided with Metal Inserts for perfect alingement .SIDE TABLE- Side table unit of size - 1050 X 400 X 725mm H . The table is supported on a three drawerfixed pedestal storage unit . The unit is made out of 18mm Thick PLPB with both side laminatescomplete in all respect with all necessary arrangements. |
| 445 | Providing, Supplying HYDE-MB MEDIUM BACK CHAIRSNylon base with nylon castorsAdjustable handleswith PU padCenter tilt mechanism with multi position locking. The tilt has a 1:1 ratio; for every one inch you lean back, the front edge of the seat comes up one inch. 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PP Fiber glass filled injection moulded shell and backbone connector connected by using flexible nylon glass filled clip 4mm steel plate insert for the backbone connector reinforcement 6 nos of M6 insert nuts for connection. Seat - Fabric Back - MeshClass IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Black framecomplete in all respect with all necessary arrangements. |
| 446 | Providing, Supplying \"HYDE-VISITOR VISITOR CHAIRSC- Frame Pipe section with Levellors powder coatedFixed Handles -PP 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite. PP Plastic injection seat shells connected by 4 nos of self tapping screws.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PP Fiber glass filled injection moulded shell and backbone connector connected by using flexible nylon glass filled clip 4mm steel plate insert for the backbone connector reinforcement 6 nos of M6 insert nuts for connection. Seat - Fabric Back - Mesh With MS powder coated frame\"complete in all respect with all necessary arrangements. |
| 447 | Providing, Supplying the FST table of size 1200X600X750 MMsupported on Metal powder coated legs & beams made out of 1.2 mm thick CRCA pipe section in dual finish.The beams are connected to legs with the help of aluminium die casted brackets with powder coated finish. The unit is considered with a three drawer mobile pedestal storage unit. The table tops are made up of 25mm thick PLPB board with 2mm thick edge banding as per the drawings . An 18mm thick modesty panel with 2mm thick edge bnding is considered as per the design. The wire management is considered with 2 nos Gromet holes on the desktopcomplete in all respect with all necessary arrangements. |
| 448 | Providing, Supplying HYDE-MB MEDIUM BACK CHAIRSNylon base with nylon castorsAdjustable handleswith PU padCenter tilt mechanism with multi position locking. The tilt has a 1:1 ratio; for every one inch you lean back, the front edge of the seat comes up one inch. 15mm ply with water fall edges with High pressurePU Mouldedfoam and upholstered with approved Fabric/ Leathrite.Common mounting opening ready with M6 nut for all different type of mechanisims, arms and backbones.PP Fiber glass filled injection moulded shell and backbone connector connected by using flexible nylon glass filled clip 4mm steel plate insert for the backbone connector reinforcement 6 nos of M6 insert nuts for connection. Seat - Fabric Back - MeshClass IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Black framecomplete in all respect with all necessary arrangements. |
| 449 | Providing, Supplying the Desking system considered is SL50 Desking system. The Legs are made up of 1.5mm thick CRCA Pipe section of size 50mm x 50mm with powdercoated finish upto 50 microns. The Beams are made up of 1.5mm thick CRCA Pipe section of size 40mm x 40mm with powdercoated finish upto 50 microns. The Legs are connected with the Beams with patented Aluminium Die casted connectorscomplete in all respect with all necessary arrangements. |
| 450 | Freight Charge 10 % on Basic Cost |
| 451 | Panchayat Bhawan - External development |
| 452 | Providingandlayingfactory made 60mmthickrubber moulded interlocking cement concrete tiles (30mpa) including 25 mm thick compacted bed of fine sand compacting and propper embedding/ laying of interlocking tiles levelling and dressing of surfaces to required level and slope, filling joints with fine sand, including cost of material, cost, T&P etc. required for proper completion of work as directed by Engineer-In -Charge. |
| 453 | Providing and laying at or near ground level factorymadekerbstoneofM-25grade cement concrete in positionto the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3coarsesand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge(lengthof finishedkerb edgingshallbemeasuredforpayment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge). |
| 454 | Panchayat Bhawan - Miscellaneous Work |
| 455 | Providing, fixing and installing Kiosk made up with M.S tubular sections, angles and necessary accessories required for joining and welding of steel structure . Roof top to be provided with Galvalume sheet, CC flooring with hardener, necessary brickwork for wall and foundation for supporting the steel structure. Steel structure to be finished with primer and duco paint and masonary structure to be finished with putty primer and acrylic paint. Complete in all respect as per approved drawing and specification. |
| 456 | Dismantling Works |
| 457 | Dismantling cement concrete or brick or granolithic floors, including base concrete & including stacking o dismantled materials asdirected by Engineer In Charge with in a distance of 60 mtr.(200ft) |
| 458 | Dismantling reinforced cement concrete or brick concrete, including stacking of dismantled materials as directed by Engineer In Charge with in a distance of 60 mtr. |
| 459 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. |
| 460 | Dismantling brick workor stone work in lime or cement mortar and including stacking of materials as directed by Engineer In Charge with in a distance of 60 mtr. |
| 461 | In cement mortar. |
| 462 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : |
| 463 | From brick work and stone workin cement mortar. |
| 464 | Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : |
| 465 | In cement mortar. |
| 466 | Dismantling of girders, truss and other steel work and including stacking of materials as directed by Engineer In Charge with in a distance of 60 mtr. |
| 467 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : |
| 468 | Taking out existing CC interlocking paver blocks from footpath/ central verge,including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 469 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 470 | Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. |
| 471 | Mis. Charges for removing of RCC, GI Electric poles ,wires,Transformer, Drains & Sewarage utility. |
| 472 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 473 | ICT WORKS (Smart Classroom) |
| 474 | Smart Class Solution - Centralised Web-Video Portal with centralised distribution engine and Mobile Application |
| 475 | 78\" Electronic Whiteboard (in classrooms, Multipurpose room)Support OS: Windows 10Pen Tray: Optical sensors in the pen tray detect when you lift a pen or the eraser from the tray. LEDs show the active tool.Pens and Eraser: Black, blue, red and green pens, and a rectangular eraser. Pen, finger and pointer enabled writing.Resolution: Touch resolution is approximately 4000 × 4000.Screen Surface: The hard-coated polyester surface is tear proof, optimized for projection, compatible with dry-erase markers and easily cleaned with whiteboard cleaner.Digitizing Technology: Infrared Multitouch Technology.Board Material: Extruded Polystyrene + Galvanized Steel / Thickness min. 15 mmFrame Finish: Two-tone Ceramic Steel.Wall mounting. |
| 476 | Projectors (in classrooms, Multipurpose room) |
| 477 | Video-conferencing equipment at Staff room and Multipurpose room)Flat Screen: Size: 55”; Aspect Ratio 16:9; Touch Induction: IR; Light: LED; View Angle: 0-160 deg.; Response Rate: 8 ms; Resolution: 1920 x 1080; Contrast Ratio: Mega Contrast Ratio; Color: 16.7 M; Ports: HDMI x 2, VGA x 1, PC-AUDIO x 1, YPBPR x 1, RFIN x 1, AV-In x 1, AV-Out x 2, USB x 1 (Movie, Image & Audio)Camera: 1080P; USB 2.0 connection; 2.1 MP, 10x zoom; Pan: 0 to 360 deg.; IR remote control; Tilt: +/- 60 deg.; RS232/RS485 connections.Microphone: 85dB speakers; 3 mics; Echo cancellation; Noise reduction; USB and Bluetooth connectivity. |
| 478 | Laptop tablet with Smart Classroom software in each classroom11th Generation Intel® Core™ i5-11300H Processor (8MB Cache, up to 4.4GHz); Windows 10 Home Single Language, English; videocard: Intel® Iris® Xe Graphics with shared graphics memory; memory: 8GB, 2x4GB, DDR4, 3200MHz; harddrive: 512GB M.2 PCIe NVMe Solid State Drive; Ports & Slots |
| 479 | Uninterrupted Power Supply (UPS) with Sealed Maintenance Free Battery (30 mins. Backup) - 1 KVA |
| 480 | Cooler Big size |
| 481 | Training to Teachers - Basic Computers, Use of Textbooks, Application Softwares, Internet use.- 2 days (10 Hours) |
| 482 | ICT WORKS - Integrated Health Management & Telemedicine (at Panchayat Bhawan) |
| 483 | Connected Health Solution at Doctor\"s consultation room (GF) |
| 484 | Telemedicine System at Health Testing Lab (GF)Blood chemistry analyser; Urine analyser; Instant analyser; Digital microscope; Centrifuge machine; Oven; Micro pipette; Cubit; Tourniquet; Lab table; Screen |
| 485 | Video-conferencing equipment at Doctor\"s consultation room (GF), Training center (FF), Multipurpose hall (GF)Flat Screen: Size: 55”; Aspect Ratio 16:9; Touch Induction: IR; Light: LED; View Angle: 0-160 deg.; Response Rate: 8 ms; Resolution: 1920 x 1080; Contrast Ratio: Mega Contrast Ratio; Color: 16.7 M; Ports: HDMI x 2, VGA x 1, PC-AUDIO x 1, YPBPR x 1, RFIN x 1, AV-In x 1, AV-Out x 2, USB x 1 (Movie, Image & Audio)Camera: 1080P; USB 2.0 connection; 2.1 MP, 10x zoom; Pan: 0 to 360 deg.; IR remote control; Tilt: +/- 60 deg.; RS232/RS485 connections.Microphone: 85dB speakers; 3 mics; Echo cancellation; Noise reduction; USB and Bluetooth connectivity. |
| 486 | Personal Computer with software at Telemedicine Lab (GF)10th Gen Intel® Core™ i5-10400 processor(6-Core, 12M Cache, 2.9GHz to 4.3GHz); Windows 10 Home Single Language, English(Dell recommends Windows 10 Pro for business/ organisation); videocard: Intel® UHD Graphics 630 with shared graphics memory; memory: 8GB, 1x8GB, DDR4, 2666MHz; harddrive: 256GB M.2 PCIe NVMe Solid State Drive + 1TB 7200 rpm 3.5\" SATA Hard Drive; EPA Chassis with TPM; Ports and Slots |
| 487 | Uninterrupted Power Supply (UPS) (30 mins. Backup) at Record Room- 1 KVA |
| 488 | 1.5T Split AC for various rooms at Panchayat Bhawan |
| 489 | System Installation & Commisioning |
| 490 | System Training |
| 491 | Medical van for providing facilities with Doctors at remote locationsAmbulance Cot: Roll-in Self Foldable Stretcher, Light & Safe Scoop stretcher and foldable, Spine board, Wheelchair, transfer sheet with 6 handles;Bi-Phasic Defibrillator-cum-Cardiac Monitor with NIBP, SPO2, EtCo2, Respiration Rate, 12 lead ECG Recorder;Wall mounted transport ventilator: Separate control for inspiratory and expiratory time and flow rate, respiratoryrate ratio delivery of upto 1:2, Pneumatic suction & inhalation therapy kit; Suction pump (1 manual + 1 electronic): -200 to -700 mbar in steps of 100 or less adjustable,Capacity 10-16 lpm;Each 02 Nos. - Artificial manual breathing unit, Nebulizer, Handheld Glucometer, Stethoscope, Digital BP apparatus, Digital thermometer;Stationary O2 cylinder: 01 No. 46.7 ltr & 01 No. 10 ltr capacity; Portable O2 cylinder: water capacity 1 ltr, Gas capacity 0.15 cu.m.; Electronic Volumetric and Syringe infusion pump;Pupillary torch; needle & syringe destroyer; Central vein catheter; Each 02 Nos. - Cervical collars, Scissors with Round-tip, Toothed Forceps-Dissecting, 6\" Artery, Tothed & Magill\"s Forceps, Kidney tray (500ml);First aid kit bag; 50 Nos. Klik clamps; 100 Nos. Tongue Depressor |
| 492 | ICT WORKS - Advanced Agriculture Technology (at Panchayat Bhawan) |
| 493 | Miscellaneous costs (sampling, staff, SHC printing, awareness campaigns, Drone survey, GPS tagging) |
| 494 | Uninterrupted Power Supply (UPS) (20 mins. Backup) at STL Room |
| 495 | ICT WORKS - Miscellaneous Security System (each at School and Panchayat Bhawan) |
| 496 | Fire Detection and Alarm System (ABB) |
| 497 | CCTV Camera with NVR |
| 498 | ICT WORKS - Miscellaneous Engineering Accessories (at School and Panchayat Bhawan) |
| 499 | Cabling system (I&C, Fiber Optic), Interfacing Hardware, Cable Trays, Power Supply Distribution and Socket Boards, Earthing System, Electrical Fixtures and accessories, fully wifi and including audio annoucement system etc.a. Networking (Structured Data Cabling with Conduit,Casing & Capping, Patch Panel, Information Outlet/Face Plate, Switches, Rack) b. Electrical Cabling with Conduit, DB, Switch & Socket Boards, Powerd distribution Systemc. Earthing d. Wi-Fi Internete. Audio Anoucement System |
| 500 | Contigencies @3% (Including Geo-tehnical Investigation, Survey and Structural design/Report) |
AI Tender Summary
Tender Timeline
Apr 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender