Addn / Altn And Special Repair To Jcos / Or Md Accn At Bengdubi Mil Station
Tender Value
3.75 Crore
Estimated cost
Bid Submission
03 Jun 2022
0 days left
EMD
4.50 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bengdubi → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addn / Altn And Special Repair To Jcos / Or Md Accn At Bengdubi Mil Station
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Apr-2022 | change of date | Date | 10-May-2022 |
| 2 | 09-May-2022 | amdt of date | Date | 23-May-2022 |
| 3 | 14-May-2022 | critical date change | Date | 27-May-2022 |
| 4 | 19-May-2022 | date changes amendements | Date | 02-Jun-2022 |
| 5 | 21-May-2022 | change of date amdts | Date | 02-Jun-2022 |
| 6 | 23-May-2022 | change of critical dates | Date | 03-Jun-2022 |
| 7 | 25-May-2022 | Revised General Pages | Terms and Conditions | 03-Jun-2022 |
| 8 | 25-May-2022 | Revised BOQ | BOQ | 03-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and average 15cm deep and getting outin soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exceeding 1.5 m wide, not exceeding 1.5 m in depth & n exc 10 sq m on plan for foundation, etc. or for shafts, wells, cesspits, man-holes, pier holes, for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 4 | Removal of excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 5 | Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing debries/rubbish outside the MOD land complete all as specified and as directed. |
| 6 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick ( Square/Rectangular) area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 7 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick ( Square/Rectangular) area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting / Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 8 | M& L for colouredNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 9 | M&L for colouredGlazed ceramic tiles 300mmx 450mm, 6 to 7 mm thick as in skirting/ dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified andand as directed. |
| 10 | M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6for laying floor finishescomplete all as specified and as directed. |
| 11 | M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed. |
| 12 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitionsetc, removing debries/rubbish outside the MOD landcomplete all as specified and as directed. |
| 13 | M&L for granite (of any type) stone slab 18-20 mm thick (table rubbed and polished), in skirting, Kitchen platform/dado etc laid over cement screedbed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed. |
| 14 | M&L for Machine cut kota stone slab flooring 18-.20mm thick, (table rubbed) (moulded exposed edge) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and rubbing and polishing including screed bed of bedding layer of morter 20mm thick in CM 1:6 etc complete all as specified and as directed. |
| 15 | M&L for Machine cut kota stone slab18- 20mm thick, (table rubbed) (moulded exposed edge), in riser and steps, skirting, dado , over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round andrubbing and polishing including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed. |
| 16 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed. |
| 17 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed. |
| 18 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqmeach and removing from site complete etc complete all as specified and as directed. |
| 19 | S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc including one shop coat of red oxide zink crome primer complete all as specified and as directed. |
| 20 | S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etcincluding one shop coat of red oxide zink crome primer complete all as specified and as directed. |
| 21 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and drawing as shown SSR Part II Section 8 complete all as specified and as directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 22 | S&F Factory Made Solid PVC Moulded Door Shutter, (wood free EPS) 28 to 30mm thick (stiles), with 4 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, as per specification & drawing as shown SSR Part II Section 8complete all as specified and as directed. |
| 23 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 24 | S&F 2nd class hard wood 30 mm thick made glazed and skeleton shuttersopen rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 25 | S&F 25mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 26 | S&F mild steel confirming to Fe-290(Gde E-165) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ladder etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, including one shop coatof red oxide, zinc chrome primer complete all as specified and as directed. |
| 27 | S&F mild steel conforming to Fe.290.Gde-E-165 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workincluding one shop coatof red oxide, zinc chrome primer complete all as specified and as directed. |
| 28 | S &F Steel windows with side hungs shutters including projecting type hinges with steel handle, and steel dovetailed or welded etc with glazing barincluding one shop coat of red oxide zink crome primer complete all as specified and as directed. |
| 29 | S&F Steel windows with side hungs shutters including projecting type hinges with steel handle, and steel dovetailed or welded etc without glazing barincluding one shop coat of red oxide zink crome primer complete all as specified and as directed. |
| 30 | S&F 3 mm thick sheetglass, ordinary qualityand glazing with oil putty in squares in exc 0.5 sq.m in each pane etcc omplete all as specified and as directed. |
| 31 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed. |
| 32 | S&F Aluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed. |
| 33 | S&F Aluminium anodised towerbolt 150 mm long of extruded section etc complete all as specified and as directed. |
| 34 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed. |
| 35 | S&F butt hinges,100 mm heavy weight, cold rolede mild steel and fixed complete all as specified and directed. |
| 36 | S&F150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 37 | S&F ball catches with 8 mm dia steel ball magnet catches for cuboard shutter including striking plate as approved etc completeall as specified and as directed. |
| 38 | S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised with of flap (when open) 30 mm etc complete all as specified and as directed. |
| 39 | Dimantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed. |
| 40 | S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT conforming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 MPA yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 41 | S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT conforming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 MPA yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 42 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and as directed. |
| 43 | M&L Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 4 mm dia. G.I. (upto 1800mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 44 | M&L 4mm thick Non asbestos fibre cement disigner pre-painted building boards fixed or laid/ inserted to timber/ GI/ aluminium framework with screws complete all as specified and directed. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 46 | S&F Rolled mild steel Joist, channel, angle, or tee sections, Fe-410- W(Gde-E-250)quality B fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)including one shop coatof red oxide, zinc chrome primercomplete all as specified and as directed. |
| 47 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etcremoving debries/rubbish outside the MOD land complete all as specified and as directed. |
| 48 | M&L for rendering 5mm thick on concrete surfaces of ceiling of chajja etc in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed. |
| 49 | M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 50 | M&L for 20mm thick rendering with cement mortar (1:4)on fair faces of brick work in two layers (10mm& 10mm)seperately mixed with water proofing compound in top layer as per manufacturer\"s instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 51 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 52 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed. |
| 53 | All as per item No 52 but 20 mm dia bore. |
| 54 | All as per item No52 but 25 mm dia bore. |
| 55 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed. |
| 56 | All as per item No 55 but 20 mm dia bore pipe. |
| 57 | All as per item No 55 but 25 mm dia bore pipe. |
| 58 | Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing to store etc complete all as specified and as directed. |
| 59 | S&F rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part-I etc complete all as specified and as directed. |
| 60 | S&F20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) etc complete all as specified and as directed. |
| 61 | S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and as directed. |
| 62 | S&F Hard drawn steel wire fabric in available size, weight not exc 4.00 Kg /sqm fixed in tank cageing including welding, riveting, framing etc complete all as specified and as directed. |
| 63 | Taking out unserviceable APP membrane with plaster from roof surfaces and removing debries outside MoD landall as specified and as directed |
| 64 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface mixed with liquid water proofing compound as per manufacturer instructions etc complete all as specified and as directed. Notes: LiquidWPC shall be measured and paid seperately. |
| 65 | M&L water proofing treatment to RCC roof slab, including parapet comprising with the following course of treatment/specification from bottom to top (i) Cleaning of old concrete surfaces of roof, picking sweeping cleaning the surface to remove all loose dust and thoroughly washing down with clean water and dried complete(ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm.(iii) Supply and laying 3mm thick APP based olymeric membrane of approved manufacturer with weight not less than 3.60 Kgs per Sqm, reinforced with non-woven polyester febric weight not less than 150gms per Sqm.Polymeric membrane shall be taken to a height as required at site/30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(iv) One coat of Solar reflective bituminious Aluminium paint of approved brand to be provided over the APP membrane as per manufacturers instructions.Note : (a) Work shall be carried out through specialized applicator approvrd by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted.(b) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (c) A minimum overlap of 150mm and 75mm should be made at the endand sides of the polymeric membrane respectively and sealed alloverlaps and joints as per manufacturers instruction. |
| 66 | Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and as directed. |
| 67 | M&L for brick work with fly ash bricks straight or curved on plan in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed. |
| 68 | M&L fly ash brickwork straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 69 | S&F in repair white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long andMS brackets complete all as specified and as directed. |
| 70 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed. |
| 71 | S&F 0.5mm thick stainless steel plate rack of overall size 24x 36 x 10 inch of standard quality and shapes completed all specified and as directed. |
| 72 | S&F in repairs coloured Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding flushing cistern & flush pipe) including connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed. |
| 73 | S&F as in repair bevelled edge mirror of selected quality of size 600 mm x 600mm mounted on 6 mm thick AC building board of or 6 mm thick with 40mm thick acryic beading etc complete all as specified and as directed. |
| 74 | S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed. |
| 75 | S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed. |
| 76 | S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all asspecifiedand as directed. |
| 77 | S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed. |
| 78 | All as per item No 77 above but tap 2 in 1 of 15mm bore complete all as specified and as directed. |
| 79 | S&F in repair stop valves /angle valves fancy type chromium plated brass cast copper (concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed. |
| 80 | S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed. |
| 81 | S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed. |
| 82 | S&F in repairs 32mm bore Low density polyethylene (LDPE) pipes of pressure rating 6kgf/Sq cm etc complete all as specified and as directed. |
| 83 | S&F in repair for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed. |
| 84 | S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed |
| 85 | Dismantling of cast iron or reinforced concrete drain pipe up to 100 mm dia, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed. |
| 86 | Taking down PVC rain water pipes (any size or pattern) including all fittings head shoes etc complete all as specified and as directed. |
| 87 | S&F in repair for 75 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed. |
| 88 | S&F in repair for 100 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed. |
| 89 | S&F 75mm bore cast iron Bends of (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 90 | S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and as directed. |
| 91 | S&F 75 mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 92 | S&F 100 mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 93 | S&F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified nad directed. |
| 94 | S&F in repair 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specifiedand as directed. |
| 95 | Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically providedremoving debries outside the MOD land complete all as specified and as directed. |
| 96 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 97 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically providedremoving debries outside the MOD land complete all as specified and as directed. |
| 98 | M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc completeall as specified and as directed. |
| 99 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded aggregrate) as in flooring, plinth protection Finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 100 | M&L reinforced cement concrete M-20 (Nominal Mix) (20 mm graded aggregate)in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 101 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 102 | M&L TMT bars 10 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed. |
| 103 | M&L TMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 104 | M&L for TMT bars 6 to 8 mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 105 | M&L for providing reinforced cement concrete M-20 (Nominal mix) (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 106 | M&L for reinforced cement concrete M-20 (Nominal Mix) (20 mm graded aggregate) as in chajjas complete all as specified and directed. |
| 107 | Use and waste for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 108 | Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 109 | M&L 19/20mm thick pre laminated interior grade both sides laminated for cup board etc complete all as specified and as directed. |
| 110 | M&L for cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) as in hold fast and fillingof pressed steel chowkat etc complete all as specified and as directed. |
| 111 | M&L for cement concrete 1:2:4 type, B1 (using 20 mm graded stone aggregates) as in copings, chajja kerbs, roof padding/ staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 112 | S&F in repair mild steel helical door spring 300mm long ordinary rat tail type including roller & roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 113 | M&L for 15mm thick rendering with cement mortar (1:3) as in sides and soffits of sunken floor, mixed with water proofing compound as per manufacturer\"s instructions finishing the surface even and smooth without using extra cement complete all asspecified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 114 | M&L cement concrete 1:5:10 type E-2 (using 20mm granded brick aggregates) as in sunken portion of WC etc complete all as specified and as directed. |
| 115 | M&L for Cutting holes into or through brick walls built i in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete. superficial area exc 150Sqcm and not exc 400Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as requiredcomplete all as specified and as directed. |
| 116 | S&F decorative stainless steel curtain rod of wooden finish 20mm dia thickness not less than 0.75mm fixed with curtain rod holder fixed in walls with screws and finials caps with 06 Nos of curtain ring per Rm complete all as specified and directed. Note:- Curtain rod holder and finials caps will be measured and paid seperately at supply only rates. |
| 117 | Supply only decorative stainless steel curtain holding bracket suitable for holding 20mm curtain rod heavy duty complete as specified and directed. |
| 118 | Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete as specified and directed. |
| 119 | S&F health faucet with flexible pipe 15mm bore 1.5 m long complete as specified and directed. |
| 120 | M&L for preparing new plastered surface of walls with 1mm thickwall care putty and applying two coat of oil bound distemper white or any tint over a coat of primer etc complete as specified and directed. |
| 121 | M&L for complete removal of existing treatment of wall with applying 1mm thick wall careputtywith primary chalk white and two coat of oil bound distemper white or any tint over a coat of primer etc complete as specified and directed. |
| 122 | M&L for preparing newely plastered surface of wall applying 1mm wall care putty with priming chalk white and finishing walls with acrylic smooth exterior paint of required shade two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm etc complete all as specified and as directed. |
| 123 | M&L for comoplete removing of existing treatment on wall applying 1mm wall care putty with priming chalk white and finishing walls with acrylic smooth exterior paint of required shade two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm etc complete all as specified and as directed. |
| 124 | M&L for preparing new plastered surface of ceiling and applying two coats of white wash etc complete all as specified and as directed. |
| 125 | M&L preparing old plastered surface of ceiling and applying one coat of white wash etc complete all as specified and as directed. |
| 126 | M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 127 | M&L preparing of old painted surfaces of wood & wood based surfaceof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 128 | M&L for Preparation of steel and iron surfaces duly applied with shop coat of primer of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint, complete all as specified and as directed. Note :Cost of application of shop coat of primer not included in the above item. |
| 129 | M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 130 | Cleaning of vegatation from roof, slab, wall, chajja etc and digging out roots etc and filling holes and finish the surfaces with cement morter (1:3) complete all as specified and directed. |
| 131 | M&L for cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thick on roof top to receive water proofing treatment complete all as specified and directed. |
| 132 | M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed. |
| 133 | M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltr linear metre including drilling and plugging holes etc in apron complete all as specified and directed. |
| 134 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 135 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, alongwith fittings and fixtures such as switches, ceiling roses, pendants, tube light fittings, bulk head fitting regulator, sockets main switches, DB, etc removing materials to store for keeping in safe custody or for taking credit & making good of disturb surfaces of wall/floors etc complete all as specified & directed. |
| 136 | Taking down main switches and DBs of any type and make including wooden board / junction box complete all as specified and directed. |
| 137 | M&L for point wiring with concealed in wall 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly complete all as specified and directed for following:-Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate.2. M&L for cutting chases on walls/ ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. |
| 138 | (a) One light point / one fan point controlled by one, one way swtich complete. |
| 139 | (b) 3 pin 5 Amps switch socketon independent board with 1.5 Sqmm copper cable . |
| 140 | (c) 3 pin 15 Amps switch socketon independent board with 2.5 Sqmm copper cable including 2.5 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth. |
| 141 | (d) 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth. |
| 142 | (e) 5 Amps socket point on the same board controlled by one switch. |
| 143 | (f) One light point controlled by two, two way switch with 1.5 sq mm copper conductor cable. |
| 144 | Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed. |
| 145 | Supply and fixing in replacement of socket outlet flush type 2 in 1,3 pin 5 Amp230 volts white/ivory finish all as specified & directed. |
| 146 | S&F 3 pin 15 Amps switch socket combination flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified. |
| 147 | Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finishcomplete all as specified and as directed. |
| 148 | Supply and fixing in replacement of bell push, 230 volts white finish complete all as specified and directed. |
| 149 | Supply and fixing in replacement of bell ding dong type AC, 230 volts, single phase complete all as specified and directed. |
| 150 | Supply and fixing in replacment of ceiling rose of size 65 x 50 mm surface bakelite 240 Voltsthree terminalcomplete all as specified and as directed. |
| 151 | Supply and fixing in replacement of step type fan regulator complete all as specified and directed. |
| 152 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 153 | All as item no 152 above but LED batten 10/9 watt 2 ft long. |
| 154 | S & F lamp holder insulated body PVC/ polycarbonate with back plate and 9 W LED bulb suitable for batten fitting complete all as specified and directed. |
| 155 | S&Fsecurity light luminaire for 1x25 W LEDwith deep drawn housing complete with and including cable for connection from ceiling rose with3 core 1.5 Sqmm PVC insulated stranded copper conductor all as specified. |
| 156 | S&F steet light bracket made out of 25 mm bore GI light grade 1.00 m long to required shape as in bracket for steet light fittings fixed with two pair of MS flat iron clamp of size50mm X 6mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed. |
| 157 | Taking down carefully ceiling fan of any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan including blades refixing the fan in same position including all electrical connection and material and labour for replacement oftwo nos split pins, one connection block and one rubber seal all as specified and as directed. |
| 158 | Material and labour for painting of ceiling fans complete of any sweep/ make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavaties with filler materials and writing serial/ MES number as specified (with paint of black colour with each letters/figures in block of height n. exc 2 cm) complete all as specified and as directed. |
| 159 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades and frame and louvers including anti-dust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastner, bolts, nuts, washers, etc of appropriate size complete all as specified and directed. |
| 160 | Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener, bolts, nuts, washers etc of appropriate size complete all as specified and directed. |
| 161 | S & F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with common bus bar at incoming end all as specified and directed. |
| 162 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incoming end all as specified and directed. |
| 163 | S & F MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA complete all as specified and directed. |
| 164 | S & F MCB \"C\" series Single pole and nutral 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed. |
| 165 | S & F MCB \"C\" series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed. |
| 166 | Supply and draw sub main wiring in repairs of two run 6.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduitmedium duty and accessories of not less than 25 mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of4.0sqmm single core PVC insulated unsheathed copper earth continuity conductorincluding making good disturbed surface all as specified and directed.)(NOTE : Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.) |
| 167 | S&F metal clad socket outlet with MCB single pole and neutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hardwood wooden board including complete electrical connection by proper size of copper lugs complete all as specified. |
| 168 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanisedmeans of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and as directed. |
| 169 | S&F LED bulk head fitting 10 Watt enviornmental friendly (water proof IP 66 ) energy saving surface mounted decorative hexagon bulk head back lit LED luminaire comprising of superior quality LED driver complete all as specified and directed. |
| 170 | S&F Decorative wall light fixture made out of polycarbonate, suitable with 9 watt LED bulb complete all as specified and directed. |
| 171 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 172 | S & F RCBOs double pole 240 volt AC 32 Amps 240 volt 50 Hz minimum leakage current 30mA complete all as specified and directed. |
| 173 | Supply, laying, jointing and testing LT cable in trenches or on poles/ walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core. Note:1. Excavation and earth work will be measured and paid seperately. |
| 174 | Supply and laying of well burnt bricks, sub class \"B\" laid flat in trenches for protection of cable complete all as specified and directed. |
| 175 | M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 176 | M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. |
| 177 | Taking down carefully energy meter after disconnecting the electrical connection, refixing or replacementthe energy meter in same position including all electrical connection and material and labour all as specified and as directed. |
| 178 | Taking out old existing galvanised iron water mains (including all fittings) with spigot and socket ends and fittings and removing unserviceable pipes and fittings to store complete all as specified and directed for 50 mm bore of pipes. |
| 179 | All items as per Ser No 178 above but 40mm bore. |
| 180 | All items as per Ser No 178 above but 25mm bore. |
| 181 | All items as per Ser No 178 above but 20mm bore. |
| 182 | M & L for steel water tubing medium grade galvanised with new fitting laid in trenches for the 20 mm size complete all as specified and directed. |
| 183 | All items as per Ser No 182 above but 25mm bore. |
| 184 | All items as per Ser No 182 above but 40mm bore. |
| 185 | All items as per Ser No 182 above but 50mm bore. |
| 186 | S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe as fixed in repairs complete including dismantling unserviceable one all as specified and directed for 50 mm bore pipes. |
| 187 | All items as per Ser No 186 above but 40 mm bore |
| 188 | All items as per Ser No 186 above but 25 mm bore |
| 189 | All items as per Ser No 186 above but 20 mm bore |
| 190 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 with using (40 mm graded stone aggregates) as in sub-base of flooing etc complete all as specified and as directed. |
| 191 | M&L Machine pressed polished precast conctete interlocking paver block with grey cement and no pigment of any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade complete all as specified and as directed. |
| 192 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 193 | M&L for providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) solid block in kerb stone edging etc (of any spcification) with plain fair faces including chambers watering throathings etc setting in cement mortar 1:6 with joints to match complete all as specified and as directed. |
| 194 | Demolition and breaking up drain pipes 150mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including removing debries out side the MoD land complete all as specified and as directed. |
| 195 | M&L for precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggrgates ) set in CM 1:4 as in landing, cover slab (for manholes, chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and as directed |
| 196 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brickwork or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture\"s instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately. |
| 197 | M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm grades stone aggregates) as in foundations and mass concrete etc complete all as specified and directed. |
| 198 | M&L for 150 mm dia salt galzed stone ware (SGSW) drain pipe, grade \"A\" laid in trenches and jointed complete all as specified and as directed. |
| 199 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in surface channels and drains complete all as specified and directed |
| 200 | M&L cement concrete 1:3:6 type C-2 for 150 mm dia in bed to drain pipes including packing under, and haunching against the sides of pipes etc complete all as specified and as directed. |
| 201 | M&L for plain cement concrete 1:3:6 type C2 (using 40 mm graded aggregate) as in surface channels and drains , sub base etc complete all as specified and directed. |
| 202 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 203 | Add or deduct for each 25 mm girth or part thereof over or under 30 cmfrom item No 203 above. |
| 204 | Note: Schedule of cedit (Sch \"A\" Part- II) amount of Rs 558274.00 shall be deducted from the total quoted amount of BOQ. |
AI Tender Summary
Tender Timeline
May 25, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 10, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 23, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 27, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 02, 2022
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 02, 2022
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 03, 2022
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 03, 2022
18:00 IST
Corrigendum-7 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 03, 2022
18:00 IST
Corrigendum-8 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender