Construction Of Rangamati Employee Colony Road Under Sub-Division No.-I During The Year 2022-23Sh- Construction Of Retaining Wall, Palasiding Work ( L-28.00 M ) And Earth Filling Etc.
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
27 Apr 2022
0 days left
EMD
19994
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
amarpur → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Rangamati Employee Colony Road Under Sub-Division No.-I During The Year 2022-23Sh- Construction Of Retaining Wall, Palasiding Work ( L-28.00 M ) And Earth Filling Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for StructuresB. With dewatering.Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m,dressing of sides & bottom and backfilling in trenches with excavated suitable material.I. Ordinary Soili) Upto 3 m depth |
| 2 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200.i)Sand filling |
| 3 | Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement)(I)P.C.C grade M 10(i) Nominal mix 1:3:6 |
| 4 | Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement)III. P.C.C. grade M 20 (1:2:4) Nominal mix |
| 5 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202. |
| 6 | Plain cement concrete(using jhama brick aggregate) in substructure complete including formwork as perdrawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204 (includingcentering, shuttering, staging etc. but excluding reinforcement)III. P.C.C. grade M 20 (1:2:4) Nominal mixupto 5 m ht. |
| 7 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel barreinforcement in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202. |
| 8 | Providing weepholes in brick masonry / stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. |
| 9 | Providing of third class local wood piles dressed to heart wood and making shoes with end tappered upto 750 mm from the bottom of the pile, marking of length with chisel in metre and part of a metre run from the bottom of the piles, applying coal tar after verification and approval of the piles and stacking at the work site as per Specification.ii) 200 mm dia to 250 mm dia piles |
| 10 | Handling and liftng of 3rd class local wood piles with 1/2 ton monkey upto refusal as per specification.ii) 200 mm to 250 mm dia piles |
| 11 | Providing and fitting fixing of single layer bitumen drum sheet wall as per direction of the Engineer-In-Charge (Rate are inclusive of labour sheet nails etc.) |
| 12 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5. |
| 13 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minimum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification |
AI Tender Summary
Tender Timeline
Apr 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender