Kdp Ranni Block Pt Carwss To Ranni Pazhavangadi Vadasserikara Extension Of Pipe Line To Karingatil Karumalikunnu And Mullan Para Pandian Para In Ward 8 Of Ranni Grama Pt.
Tender Value
2.73 Lakhs
Estimated cost
Bid Submission
14 Apr 2022
0 days left
EMD
6900
Bank guarantee accepted
Document Fee
550
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vadasserikkara → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Kdp Ranni Block Pt Carwss To Ranni Pazhavangadi Vadasserikara Extension Of Pipe Line To Karingatil Karumalikunnu And Mullan Para Pandian Para In Ward 8 Of Ranni Grama Pt.
BOQ
| Sl. No. | Item Description |
| 1 | Working Charges |
| 2 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix) |
| 3 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals. (Data Prepared based on PWD SDB - Item No.1009) |
| 4 | Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work80 mm dia nominal bore |
| 5 | Welding80 mm (ID) G.I. pipes for making bends and other specialsby gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: |
| 6 | Cutting 80mm (ID) G.I pipes for making bends and other specialsby gas cutting including cost of gas, all labour and hire charges of tools etc. complete: |
| 7 | Fabricating G.I flanges of diameter 80 mm using 8/12 mm thick including cost and conveyance charges , all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: |
| 8 | Jointing of G.I.Flanges, of sizes 80 mm with G.I.pipes in lines and levels, using suitable Nut & Bolts, packing, necessary welding and grinding work, etc. Complete as per directions. |
| 9 | Providing and fixing G.I. Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete ( New work):80 mm nominal bore |
| 10 | Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete:50 to 80 mm nominal bore |
| 11 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm. |
| 12 | Conveying and fixing C I Single acting AirValve of approved qualitywith bolts,nuts,rubber insertions etc . excluding the cost of airvalve(the tail pieces if required will be paid seperately): 25 mmSingle acting Air Valve Observed Data derivedfrom item no.18.59.of DAR |
| 13 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and fixing vertical Street Fountain post using 90 mm PVC pipe (1m) height , filled with cement concrete 1:2:4,using 20 mm broken stone and the base should be of size 0.70 MX0.70M X 0.15 M with same mix of concrete and plastered over with thick coat , including the cost of Saddle piece , cost of 20 mm/25 mm ASTM/UPVC/Blue pipe/G.I pipe, cost of 15 mm/20 mm PVC Tap and charges for taking connection as per specification and direction from the departmental officer at site. |
| 16 | Supplying, Conveying and fitting in position80 mm GI End Plugas per directions. |
| 17 | NoteGST @ 18 % of bill amount will be paid additionally |
AI Tender Summary
Tender Timeline
Apr 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender