Construction Of Road From Ekamra Vihar Road To Handia Haat Chhak In Ward No-21
Tender Value
56.76 Lakhs
Estimated cost
Bid Submission
22 Apr 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road From Ekamra Vihar Road To Handia Haat Chhak In Ward No-21
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr lead |
| 2 | Dismantlling and removing cement concrete including stacking the useful materials for re-use and removing the debries within 50mtr lead. |
| 3 | Dismantlling and removing R.C.C. columns beams slab, staircase landing, lintels including stacking the useful materials for re-use and removing the debries within 50mtr lead. |
| 4 | Earth work in Excavation hard soil or gravelly soil within 50mtr. initial lead and 1.50mtr initial lift including rough dressing and levelling the bed for excavation in foundation etc complete |
| 5 | Carriage of Excavated earth by mechanical means within 5 km lead including loading and unloading with all costconveyance T & P sundries etc complete as per direction of Engineer- in-charge. |
| 6 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 7 | Labour for laying sub-base in layers not exceeding 100 mm. watering and compacting to required density in OMC with H.R.R. but excluding costs conveyance of sub-base materials.SUB-BASE WITH STONE DUST |
| 8 | C:C: (1:4:8) using 4 cm. size H.G. (H.B) metal including the cost of all materials, labour carriage, royalty etc complete. |
| 9 | Providing laying, spreading and compacting graded stone aggregate to \"WET MIX MACADAM\" specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achive the desired density as per Clause 406 of MoSRT&H specification for road and bridge works (4th Revision). |
| 10 | R.C.C. work of M-30 grade with 20 mm down graded chips (C.B.) including hoisting & laying and Centering &shuttering etc Complete |
| 11 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 12 | 6mm thick C:P (1:4) to R.C.C. surface finished smooth including closed deep chipping and slurry treatment. |
| 13 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of E-I-C (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by E-I-C |
| 14 | Labour for scrapping, cleaning the road surface applying tack coat using 3.00 Kg of bitumen for 10M2 and laying 75 mm. thick built up spray grouting in two layers 37.50 mm. thick each layer using 0.45 Cum of 25 mm. to 40 mm. size hard grauite metal and 12.00 kg penetration grade of bitumen for 10.00M2 in each layer with 0.12 Cum of 12 mm. chips as key stone for 10M2 spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with P.R.R. including hire and running charges of P.R.R and all other machineries but including costs and conveyance of bitumen metal and chips as per specification and direction of Engineer-in-charge |
| 15 | Providind and laying \"BITUMINOUS MACADAM\" with hot mix plant using crushed aggregates of specified grading premixed with Bituminous binder of 60/70 penetration grade of bitumen transportred to site laid over a previously prepared surface with a hydrostatic paver finisher with mechanical control to the required grade level and alignment and rolling with smooth wheeled vibrating and tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for Road & Bridge works. Data for 205 Cum (450 Tonne) |
| 16 | Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen transporting the hot mix to work site laying with a hydro static paver finisher with mechanical control to the required grade, level and alignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road & bridge work. (Data for 195 Cum (450T) |
| 17 | Cleaning the existing B.T. surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and or compressed air to receive bituminous. |
| 18 | Labour for applying primer coat / tack coatfor Bituminous surface for nominal bituminous |
| 19 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60Kg/M2 using mechanical means as per clause 502 of MoSRT&H specification for road & bridge work |
| 20 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including rafleat rising glass beads @ 250gms per sqmt area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC-35. The finished surface to be level, uniform and free from streaks and holes etc complete |
| 21 | C:C: (1:2:4) using 12 mm. size H.G. stone chips including the cost of all materials labour T&P sundries etc complete. |
| 22 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength,thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compactionby using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking andLanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete. |
| 23 | Painting two coats with any approved paint including the cost of enamel paint |
| 24 | providingfifting and fixing of shoulder mounted informatory Sign Board of size (1150 mm x 743mm)using upper high efficiency full cubic reflective sheeting type-XI DG3-ASTM on4mm thick Aluminium Composit Panel (ACP) over which alphabets and numericals and reverse cut with computerised cut plotter on frame made out of 30x30x1.5mm square SS pipe main frmae, 25x5mm SS flat back suppoirt frame, 1 nos 80NB SS post with top cover including screws and revets as may be required. The frame will be fixed after necessary excavation, concrete and transportations to work site with loading and unloading and installation of the board digging 1 no ( 450x450x800mm) foundation and trench and filling with M-15 grade concrete and compacting properly including all cost, conveyance, taxes, royality etc. complete as directed by EIC |
AI Tender Summary
Tender Timeline
Apr 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender