Bhubaneswar Municipal Corporation has published Construction Of Toilets And Water Supply System To Community Center Near Nilakantheswar Temple In Ward No.07 . Submission Date for this Tender is 22-04-2022. Toilet Bathroom Tenders in Khordha Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work excavation of foundation in all kinds ofsoil including rough dressing and levelling the bed from drain berms and road approaches including supply of all labour T & P Sundries etc complete as per the direction of EIC. |
2 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per thedirection of the Engineer-in-charge. |
3 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
4 | First class Fly Ash brick work in cement mortar (1:4) in foundation and plinth & Super structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
5 | R.C.C (1:1.5:3) with 12mm to 20mm size CB HG chips for RCC works including all cost, conveyance, royalty & taxes etc. comp. of all materials to work site as per schedule item of work and the specification approved by the department & direction of Engg-in-charge.(1. Grade Beam) |
6 | Wall Beam |
7 | Roof Slab |
8 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works |
9 | Fly Ash Brick masonry in C.M. (1:4) in and super structure having crushing strength not less than 75 Kg / cm2 etc complete as per direction of EIC. |
10 | Providing & layingC.C (1:1.5:3) with 12mm to 20mm size CB HG chips for RCC /CC works including all cost, conveyance, royalty & taxes etc. comp. of all materials to work site as per schedule item of work and the specification approved by the department & direction of Engg-in-charge. |
11 | Providing2.50cm thick Grading Concrete with C.C (1:2:2) on roof slab using 6mm size down gradedCBHG Chips including all cost, conveyance, royalty & taxes etc. comp. of all materials to work site as per schedule item of work and the specification approved by the department & direction of Engg-in-charge. |
12 | Fixing tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding the cost of pre-cast tiles |
13 | 12mm thick C:P (1:4) over brick work including all cost of Mataerial & Labour etc Complete as per direction of EIC. |
14 | Providing fitting & fixing in position making RCC Jally as per approved design2.5cm to 5.00cmthick and fixing in cement ,ortar in position after cutting the grooves etc complete as per direction of EIC. |
15 | Providing 16mm thick C:P (1:6) over brick work including all cost of Mataerial & Labour etc Complete as per direction of EIC. |
16 | Providing 6mm thick C:P (1:4) over ceiling ,chajja,loft,staircase. Column,beams and walls after removing the false if necessary and close deep including all cost of Mataerial & Labour etc Complete as per direction of EIC. |
17 | Fixing Tiles to dados, skirtingand risers of steps on 12mm thickCP (1:3) joined with neat cement slurrymixed with pigments to match the shade of tiles including all cost of Mataerial & Labour etc Complete as per direction of EIC. |
18 | Cement washing Two coats on Plaster surface including watering and curing etc complete including all cost of Mataerial & Labour etc Complete as per direction of EIC. |
19 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength,thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compactionby using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking andLanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc complete as per direction of EIC. |
20 | Supplying all materials labour & T & P for fitting and fixing ofPVC door as per specification etc complete as per direction of EIC. |
21 | Finishing wall with Water proofing Cement Paint including cost of cement paint, labour T& P Sundries etc complete as per direction of EIC. |
22 | Providing K.B Brick Khoa4Cm size for soak pit etc complete as per direction of EIC. |
23 | Remove the excavated materials from site by mechanical means within 5.00Kmaway from the site etc complete as per direction of EIC. |
24 | Suplying all labour and T&P for Laying the following pipe and fitting & fixing the following fittings and Toilet fittings as per P.H. Specification etc. Complete. 15mm dia G.I Pipe |
25 | 20mm dia PVCPipe |
26 | 25mm dia ASTMPVCPipe |
27 | 25mm diagm Full Way Valve |
28 | Suplying all labour and T&P for Laying the following pipe and fitting for Sanitary Installation and Swearage Disposal and fitting & fixing the following fittingsas per P.H. Specification etc. Complete.(1) 90mm dia rigid UPVC pipe Class-3 (0.60 mpa) |
29 | 110mm dia rigid UPVC pipe Class-3 (0.60 mpa) |
30 | 90mm UPVC coupler(P.H.Materials 1564) |
31 | 110mm UPVC coupler |
32 | Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification.110mm dia SWRP" Trap 22861 |
33 | 90mm dia P.V.C. Nahani Trap(P.H.Materials 1557) |
34 | 110mm dia SWRCowel(P.H.Materials 1555) |
35 | 110mm diaP.V.C. SWR door bend 87.5"(22417) |
36 | 90mm D/Jn with door ( P.H.Materials 1530) |
37 | 110mm D/Jn with door ( P.H.Materials 1531) |
38 | 110mm dia SWRClamp |
39 | Supplying all materials,labour and T&P for fixing 10ltr capacity PVC low level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 32mm.dia. PVC long flush bend, 12mm.dia. PVC inlet connection pipe,15mm CP angle cock including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc.all complete as per specification. |
40 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.1) Vitreous china flat back wash basin 550x400 mm |
41 | Basin Bracket in pair |
42 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification. (32mmdia Semi Rigid PVC waste pipe for wash basinwith length ) |
43 | 15mmx600mm PVC connection pipe |
44 | Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sink as per specification (32mm dia CP Brass waste ) |
45 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.( 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan) |
46 | Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.( Vitreous China - Flat Back Urinal of 430mm x260mm x350mm size) |
47 | 15mm dia CP urinal spreader |
48 | Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification.( One-seated Urinal 1m x 0.50m x 0.15m size(size 600mmx350mm) |
49 | Suplying all labour and T&P for fitting & fixing the followingToiletfittingsas per P.H. Specification etc. Complete. ( Soap Case) |
50 | 125mm C.P. Grating |
51 | 20mmx600mm long C.P. Towel Rail |
52 | 15mm C.P. Bib- Cock |
53 | 15mm C.P. Long Body- Bib Cock |
54 | 15mm dia CP extension piece -3"" |
55 | C.P Pillar cock |
56 | C.P Angle cock |
57 | C.P. Conseal Stop-Cock |
58 | C. P. Flange Big |
59 | CP Telephonic shower with CP/PVC Flexible Tube with Hook. |
60 | C.P. flush bend. |
61 | Fixing Rotational moulded polyethylene 2000 litre capacity Double Layer Cylinderical Vertical water storage tanksconforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail