|
| 1 | Providing supplying and fixing the pre-cast, pre-tensioned SFRC compound wall with Pre-cast RCC poles having ginished dimension of 175mmx175mmx3000mm long (providing the construction joint at the interval of 15.40 mtr) mde in M-30 grade concrete in OPC with 10 nos of 4mm dia HTPC (High Tension Pre-coated, wie fixed in case-in-suit CC M-20 concrete in foundation footing of size 600mm dia 600mm depth from top over 150mm P.C.C of proporation in CC (1:3:6) of size 600mm dia 150mm depth at bottom and 600mmdia depth 100mm sand filling in all kind of soil of size 600mm dia 850mm depth including watering & curing for required days along with supplying fitting and fixing of precase, pretensioned SFRC slab having dimensionof 2100mm (long)x300mm (width)x50mm (thick) 17 nos of slab +300mm x150mm down ward U shape coping per span made with M-30 grade concrete having 4mm dia GI HTPC wire 4 nos covering the top of the compound wallpoles with a pre coast SFRC cover of size (300x300x150) mm in order to kept pannels in position etc complete in all respect including cost of pre cast, SFRC top cover, slab pole, including both side painting two coats of approved weather coat paint over a coat of wall primer inlcuding cost and conveyance of all materials royalties taxes all labour cess T&P required to the work etc complete as per direction of the engneerin-charge |
| 2 | Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014 cum in valume within 50m initial lead and 1.5m initial lift inlcuidng rough dressing and breaking clode to miaxmum 5cm to 7cm and laying in layer not exceeding 0.3m in depth all labour and T&P etc complete as per specification and direction of the Engineer-In-Charge |
| 3 | Supplying and filling in foundation and plinth with sand well watered and rammed in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 4 | Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 5 | R.C.C. work of M-20 gradehaving minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using12mm size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. A. Coloumn base foundation |
| 6 | B. COLUMN |
| 7 | C. PLINTH BAND |
| 8 | D. LINTEL BAND |
| 9 | E. FLOOR BEAM |
| 10 | F. ROOF SLAB |
| 11 | Cutting, straightening coiled or bent up M.S. Rod or tor steel includingbending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 12 | Fly ash Brick masonry using Fly ashBricks in FOUNDATION AND PLINTH having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 13 | Fly ash Brick masonry using Fly ashBricks in SUPERSTRUCTURE having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 14 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 15 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smoothwatering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 16 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth in ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 17 | Supplying fitting and fixing vitrified tile(SOMANY, KAJARIA, JOHNSON) in floors and dadooof size 600mmx600mm of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge (for repair work only) |
| 18 | Supplying fitting and fixing Ceramictile(SOMANY, KAJARIA, JOHNSON) in floors and dadooof size 600mmx600mm of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge (for repair work only) |
| 19 | Priming one coat with wall primer water bond cement primer including cost of all labour materials etc complete as per specification and direction of the engineer-in-charge |
| 20 | Finishing the wall surface with Acrylic Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.(Ground floor & 1st floor) |
| 21 | Finishing wall surface two coats of plastic emulsion paint over a coat of water bound primer to given an even shape of the surface including cleaning the surface with sand papering and using primer & paint of approved shade incluidng cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 22 | Finishing wall surface two coats of weather coat over a coat of water bound cement primer with cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 23 | Providing fitting fixing of AL door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and excluding 12mm thick prelaminated board fixed on door frame by menas of tapered clip No 4660 and the frame to be complete by means of jointing angle No 1855 inlcuidng all cost of labour T&P hire charges of drilling machine labour etc complete in all respect as per spectification and direction of the engineer-in-charge. |
| 24 | Supplying fixing and fittings MS door and window shutters with frames, window grills, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only). |
| 25 | Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge. |
| 26 | Supplying and fitting up window(sliding type) made up aluminium section 9778 as windows frame section NO 4095, 9095 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement inlcuidng cost of all materials all taxes labour T&P excluding cost of glass etc complete as per direction and speecfication of the Engineer-in-charge. |
| 27 | Painting two coats with approved synthetic enamel paints to wood and iron work over a coat of primer including cost, conveyance, taxes, cost of all labour as per direction and specification of Engineer in charge |
