Construction Of Boat Jetty At Palliyath Near Thookkupalam In Peralassery Grama Panchayath.
Tender Value
1 Crore
Estimated cost
Bid Submission
19 Apr 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
6900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
peralassery → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Boat Jetty At Palliyath Near Thookkupalam In Peralassery Grama Panchayath.
BOQ
| Sl. No. | Item Description |
| 1 | App. A - Initial work |
| 2 | od20849/2020_2021/IA : Providing floating plat form of size 12m x 7m on pontoon(as per drawing)in steel work riveted or bolted in built up section etc., trusses and framed work M.S angle, iron plates, tees etc. straightening cutting,fabricating and hosting including applying one coat iron primer for pontoon including cost of materials, labour charges, mobilisation charges,current charges for welding etc. hire for winch, chain, hook etc. and launching in to the river and all other incidental charges including lighting etc. complete for piling in river portion etc complete as directed by the departmental Engineer in charge. |
| 3 | App. B-Sub structure- Pile |
| 4 | 12.22 : Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawingetc complete as directed by the departmental Engineer in charge. |
| 5 | od49760/2021_2022/IA : Bored cast-in-situ M30 grade R.C.C. Pile Using Batching Plant, Transit Mixer and Concrete Pump excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.r|nPile diameter-600 mm r|netc complete as directed by the departmental Engineer in charge. |
| 6 | App C-Boat jetty |
| 7 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or moreetc complete as directed by the departmental Engineer in charge. |
| 8 | 20.9 : Integrity testing of pile using Low Strain / Sonic IntegrityTest/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge. Note:- The inclusion of the above item in the schedule of work shall be judiciously decided by the technical sanctioning authority, keeping in view the quality control, type of soil strata & importance of the project. etc complete as directed by the departmental Engineer in charge. |
| 9 | 5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 10 | 5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level |
| 11 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).etc complete as directed by the departmental Engineer in charge. |
| 12 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or moreetc complete as directed by the departmental Engineer in charge. |
| 13 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 14 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 15 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Strutsetc complete as directed by the departmental Engineer in charge. |
| 16 | 5.23 : Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).etc complete as directed by the departmental Engineer in charge. |
| 17 | 11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cementetc complete as directed by the departmental Engineer in charge. |
| 18 | od20850/2020_2021/IA : Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade:(as per 7.12.1 of DSR)One face dressedBlack Granite stone block |
| 19 | od20851/2020_2021/IA : Providing Granite stone post , 10x10 cm size, 100 cm long hand cut and chisel dressed accurately to line and level for hand railson walkway fixedbottom and top in RCC beams per Architect\"s design including the cost of materials , labour charges, conveyance etc. complete but excluding the cost of RCC beams which is to be paid seperately ( specification as per 7.12.1.1 of DSR )- Granite post 4 side dressedOne face dressedRed sand stone |
| 20 | od20852/2020_2021/IA : Providing & fixing on roof, First class superior quality Mangalore Pattern tileofapproved size and as per approved pattern on wooden reepering work including cost ofmaterials,conveyane charges and labour charges etc. complete (based on dsr 12.48)etc complete as directed by the departmental Engineer in charge. |
| 21 | od20853/2020_2021/IA : Providing & fixing on First quality flat clay tile of approved size and as perapprovedpattern on wooden reepering frame work including cost and conveyance of all materials, labourcharges etc.complete. (based on 12.48)etc complete as directed by the departmental Engineer in charge. |
| 22 | od20854/2020_2021/IA : Providing & laying on roof First class superior quality Mangalore Pattern ridge tileofapproved pattern and make on wooden reepering work complete including cost of materials,conveyanceand all labour charges for fixing. based on 12-49 |
| 23 | 12.5.1 : Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2etc complete as directed by the departmental Engineer in charge. |
| 24 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubesetc complete as directed by the departmental Engineer in charge. |
| 25 | 13.50.4 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) |
| 26 | od20857/2020_2021/IA : Stainless steel work riveted, bolted or welded in built up sections,includingcutting,hoisting, fixing in position all complete using plates, nuts & bolts and other fixtures made ofstainless steel.Labour portion is taken as that of structural steel work item No. 10.2etc complete as directed by the departmental Engineer in charge. |
| 27 | 13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work |
| 28 | 9.1.2 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 29 | 13.67.1 : Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnishetc complete as directed by the departmental Engineer in charge. |
| 30 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new worketc complete as directed by the departmental Engineer in charge. |
| 31 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)etc complete as directed by the departmental Engineer in charge. |
| 32 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soiletc complete as directed by the departmental Engineer in charge. |
| 33 | 60.7.1 : DRYRUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 34 | 60.64.1 : Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellowbed levelincluding cost coveyance labour charges etc complete. |
| 35 | 60.64.4 : Coconut Pile - Driving down coconut pile to lines and levels through variuos strata including all hire charges and labour for fixing , staging platform and all other appliances necessary for pile driving down after pointing the bottom endetc complete as directed by the departmental Engineer in charge. |
| 36 | 60.64.6 : Cutting and removing the excess length of wooden piles to lines and levels and removing the cut end of piles and stackingwithin 150metc complete as directed by the departmental Engineer in charge. |
| 37 | od20859/2020_2021/IA : Supplying and fixing old tyre on the fender post to resist the impact of stopping boat (OBSERVED DATA)etc complete as directed by the departmental Engineer in charge. |
| 38 | od20860/2020_2021/IA : Providing Cast Iron Bollardswith approved drawings and design including cost of all materials, moulding charges , cost of fixtures and all labor chargesetc complete as directed by the departmental Engineer in charge. |
| 39 | 10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 40 | od54074/2021_2022/IA : Providing and fixing Granite stone benches ( sofa )150x45x90 cm with ornamental work as per Architects design with chiselled and all materials, all labour charges etc. complete for installing on walkway and boat jettyetc complete as directed by the departmental Engineer in charge. |
| 41 | od54076/2021_2022/IA : Solar Lighting:Supply, conveyance, installation, testing and commissioning of 30W Integrated SolarLED light fitting with all accessories. Each unit should include 18V, 75W panel with Grade A solarcells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy withpowder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%, 3800-4500 lumens,etc. as required with 5years warranty Luminaire shall be suitable for mounting at aheight of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting.(Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65etc complete as directed by the departmental Engineer in charge. |
AI Tender Summary
Tender Timeline
Apr 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender