Development Of Jharaapada Smasan At Jharapada In Ward No-32.
Tender Value
21.21 Lakhs
Estimated cost
Bid Submission
19 Apr 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Of Jharaapada Smasan At Jharapada In Ward No-32.
BOQ
| Sl. No. | Item Description |
| 1 | Earth workin excavationin hard soil for foundation within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed as per the specification approved by the department and direction of Engg -in- charge |
| 2 | Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge |
| 3 | C.C (1:4:8) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 4 | Brick work with Fly ash brick masonary in cm (1:4) inF & Pwith watering and curing with cost of all labour materials T&P requeired etc complet eas per the direction of EIC |
| 5 | Providing Brick masonarry in CM (1:4) in super structure watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 6 | R.C.C (1:1.5:3) with 12mm size Crusher broken chips including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge Plinth Bend |
| 7 | Beam |
| 8 | Lintel |
| 9 | Slab |
| 10 | Chajja |
| 11 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification approved by the department with cost of binding wire 18 to 20 gauge. |
| 12 | L S masonarry in CM (1:4) in super structure watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 13 | Providing 16 mm thick cement plaster in CM (1:6)to the walls, watering & curing the same including all cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 14 | Providing 12 mm thick cement plaster in CM (1:6)to the walls, watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 15 | 6 mm thick CP in CM (1:4) including watering & curing with all cost convayance, royalties, taxesetc Complete. |
| 16 | C.C (1:2:4) with 12mm to 20 mm size Crusher broken chips including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 17 | Supplying fitting and fixing Vetrified plain/printed floor tiles having thickness 8m to 10mm tiles in floor of size30cmx30cm/40cmx40cm laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cos of all materials, labour T&P etc required for the work all complete as per the direction of EIC |
| 18 | Cement washing 2coats over plastered surrface including all cost conveyance taxes and as per the direction of EIC etc complete |
| 19 | Providing fitting and fixingof 32 mm thick flush door made out of 32 mm thick BWR Block board covered with 1 mm mica to both sides including all cost,conveyance taxes etc complete. |
| 20 | Painting 2coats with weather coat over a coat of water bound cement primer including all cost conveyance taxesand as per the direction of EIC etc complete |
| 21 | Providing supplying MS grill made of MS angle, square bar and flat including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 22 | Labour for fitting and fixing Ms grill iin position with all cost and as per the direction of EIC etc complete |
| 23 | Painting 2coats with enamel paint over a coat of redoxide primer including all cost conveyance taxesand as per the direction of EIC etc complete. |
| 24 | Providing fitting and fixingup Window (sliding type)made up aluminium section 9778 as window frame section No 4095 , 4096 and 9777,3994 as shutter frame with 5mm thick frosted glass as pannel fitted with rubber beading including locking arrangement iincluding all labour , cost , conveyance taxes and as per the direction of EIC. and as per the direction of EIC. |
| 25 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of E-I-C (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by E-I-C. |
| 26 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Based on CPWD Item no. 16.68) |
| 27 | Labour for drilling and perfectly vertical bore hole of specified dia for specified depth below ground level through consolidated and consolidated roack with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories T&P etc. |
| 28 | Lowering the following size of PVC ASTM Sch-80 housing pipe with or without slotted from ground level upto 45.00 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes T&P etc all complete A.Lowering of 125mm dia PVC pipe=50.00m |
| 29 | B.Supply of 125mm dia PVC ASTM Sch--80 pipe includign all cost complete |
| 30 | Cleaning and developing the tube well with their own compressor continuous wored till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per direction of Engineer-in-charge. |
| 31 | Supply of 0.5 HP, 7ST 4\" dia ISI mark single phase submersible pumpset with pannel box etc. complete. (To be paid as per actual) 0.5HP Sumersible Pump 1set |
| 32 | Cost of 32mm HDPE Pipe |
| 33 | Cost stainless steel nipple |
| 34 | Cost of 1.5sqmm electricCable |
| 35 | Cost of Bore Cover |
| 36 | Cost of clamp |
| 37 | Cost of steel rope . |
| 38 | Supply of 0.5 HP, 7ST 4\" dia ISI mark single phase submersible pumpset with pannel box etc. complete. (To be paid as per actual) 0.5HP Sumersible Pump 1set |
| 39 | Cost of installation of pump including accessories etc. complete. |
| 40 | Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma)A.15mm dia C.P. concealed stop cock (plazza / Zigma / Mousami) |
| 41 | b)12.50ltrs/10ltrs. Capacity L.L.flushing cistern with complete fittings |
| 42 | C)40mm brass /G.M.F.W.Valve(ISI) |
| 43 | D)UPVC pipe 25mm dia |
| 44 | Supplying all material T&P for fitting and fixing of PVCwater tank of 15000 lits with all lead , lift, taxes, and royalties etc complete. |
| 45 | Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. |
| 46 | Provision of four seater cement bench etc complete |
| 47 | Supplying, fitting and fixing Stainless Steel of 304 grade Main Door Gate as per design provied by EIC. |
| 48 | Earth workin excavationin hard soil for foundation within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bedand refiiling excavated the plant /tree as per the specification approved by the department and direction of Engg -in- charge |
| 49 | Suppling well grown decorative storng healthy disease free Juniper (2\"00\" Hight) tree with all cost convayance to site as per direction of EIC. |
| 50 | Suppling well grown decorative storng healthy disease free Babula (5\"00\" Hight)tree with all cost convayance to site as per direction of EIC. |
| 51 | Suppling well grown decorative storng healthy disease free Tikoma (2\"06\" Hight)tree with all cost convayance to site as per direction of EIC. |
| 52 | Suppling well grown decorative storng healthy disease free Foxtail palm( 7\" 00\" Hight)tree with all cost convayance to site as per direction of EIC. |
| 53 | Mo khata |
| 54 | Nimola |
| 55 | Chlorpyrifos |
AI Tender Summary
Tender Timeline
Apr 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender