|
| 1 | Disconnecting and removingceiling fan of 1200/1400 mm sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and replacement of split pins/ cotter pins and check nuts etc overhauling, lubricating , reassembling, refixing in original position complete all as specified and directed.NOTE :- spaire parts will be measured and paid seperately. |
| 2 | Taking down exhaust fans/wall mounted fans of any size and any typeand cleaning the dust properly, oiling, greasing & overhualing and replacement of defective itemsand bearings including refixing and connecting up complete all as specified and directed.NOTE :- spaire parts will be measured and paid seperately. |
| 3 | Materials and Labour for one coat of spray painting, super glossy to fan body including blades with white colour, after removing of loose paint, rust dust and oily particle by scraping , complete all as specified and as directed. |
| 4 | Material and Labour Rewinding of burnt ceiling fan of 1200 / 1400mm sweep of any make and model with supper enameled copper wire of suitable size and using insulating material ofgood quality, varnishing completeall as specified and directed by Engineer -in-charge. |
| 5 | M&L Rewinding of burnt Exhaust/wall mounted fans of 225 to 300 mm Sweep of any make and model with supper enameled copper wire of suitable size and using insulating material ofgood quality, varnishing completeall as specified and directed by Engineer -in-charge. |
| 6 | M&L Rewinding of burnt Exhaust/wall mounted fans of 380 to 450 mm Sweep of any make and model with supper enameled copper wire of suitable size and using insulating material ofgood quality, varnishing completeall as specified and directed by Engineer -in-charge. |
| 7 | Supply only Sealedball bearing suitable forExhaust/wall mounted fans ( any make and model) of 225 /300 mm Sweep (set of two) complete all as specified and directed. |
| 8 | Supply only Sealedball bearing suitable for ceiling fan of any size(set of two) completeall as specified and directed by Engineer -in-charge. |
| 9 | Supply only Rotar shaft suitable for ceiling fan of any size completeall as specified and directed by Engineer -in-charge. |
| 10 | Supply only Rubber bushes with MS clamp,bolt andnut suitable for ceiling fan of any size completeall as specified and directed by Engineer -in-charge. |
| 11 | Supply only Fan condensor 2.5 mfd suitable for ceiling fan of any size completeall as specified and directed by Engineer -in-charge. |
| 12 | Supply only Sealedball bearing suitable forExhaust/wall mounted fans of 380/450 mm Sweep of any make and model(set of two) completeall as specified and directed by Engineer -in-charge. |
| 13 | Supply and fixing in repair Geyser element 2000 watts ISI Marked of any type for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) completeall as specified and directed by Engineer -in-charge. |
| 14 | Supply and fixing in repairThermostat ISI Marked for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) completeall as specified and directed by Engineer -in-charge. |
| 15 | Supply and fixing in repair Indicator bulb 230 v suitable for any make and colour for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) completeall as specified and directed by Engineer -in-charge. |
| 16 | Supply and fixing in repair Pressure release valve suitable for 25 / 50 ltrs capacity Geyser completeall as specified and directed by Engineer -in-charge. |
| 17 | Supply and fixing in repair PVC cold water connection pipe 60 cms long 15 mm dia for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) completeall as specified and directed by Engineer -in-charge. |
| 18 | Supply and fixing in repair PVC hotwater connection pipe 60 cms long 15 mm dia for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) completeall as specified and directed by Engineer -in-charge. |
| 19 | Supply and fixing in repair outer covermade of MS Sheet of suitable thickness duly painted of white colour suitable for geyser of 25 ltr cap of any make complete all as specified and as directed. |
| 20 | Supply and fixing in repair water(in&out) geyser assembly made of stainless steel with rubber gasket and bolts completesuitable for geyser of 25 ltr capacity of any make complete all as specified and as directed. |
| 21 | Supply and fixing in repair stainless steelinner tank suitable for geyser of 25 ltr cap of any make complete all as specified and as directed. |
| 22 | Maintenance/Servicing, Cleaning, Descalingof solar water heating system of capacity 200 Ltr per dayhaving 02 Nos of collector ,01 No ofsteel tank and 01 No of plastic make up tank500 Ltr by replacement of washers, gasket, adaptor and worn outnut bolt ,GI fitting for water pipe line 20/25 mm for inlet and outlet ofsteel tank/collector /water make up tank and makingfully leak proof all as specified and directed |
| 23 | S&F in repairsHot water storage tank of cap 200 LPD made out ofStainless steel 304 grade having1.5 mm thickness insulated with 100 mm puff insulation ( insulating material rockwool of 48 kg/cum densityand covered with precoated sheet and other neceesary connected items completeall as specified and directed |
| 24 | S&F in replacement flange threaded type suitable for 20/25mm dia hot water pipe for solar hot water system all as specified by Engr -in Charge |
| 25 | S&F in replacementblack hose pipe suitable for 20/25mm dia hot/cold water pipe for solar hot water system all as specified by Engr -in Charge |
| 26 | Supply and Fix in replacement Electric heating element 3KW with suitable size of thermosatat, ISI Marked threaded/cup type to SS tank of solar water heating system 200 ltrs capacity with necessary fixtures including taking out unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 27 | S& fix in replacement of LED driver of capacity 36/42watt , single phase 230volts 50 Hz AC supply complete all as specified and directed |
| 28 | S& fix in replacement of LED driver of capacity 15/18 watt , single phase 230volts 50 Hz AC supply complete all as specified and directed |
| 29 | M&L for structuralsteelincluding nuts, bolts and washers incl welding, bending,cold or hot drilling holes for bolts in any shape or size asdirected inclusive of one coat of primer and two coats of blackpaint including removing the existing unsv oneall as directed. |
| 30 | S & F in repairs 25 mm dia Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed completeall as specified and directed by Engineer -in-charge. |
| 31 | Supply and fix in repair PVC body air ventilator of size 250 mm sweep single phase 230V completeall as specified and directed by Engineer -in-charge. |
| 32 | Supply and fix in repair PVC body air ventilator of size 300 mm sweep single phase 230V all as specified and as directed. |
| 33 | Supply and replace old unserviceable false ceiling fitting withultra modern recess mounted 36W LEDluminaire suitable for armstrong grid /POP ceiling of 2\"x2\" and complete with suitable aluminium frame for POP/Gypsum board 2x2 panel light,including electronic driver completeall as specified and directed by Engineer -in-charge. Make:Havells/ WIPRO/Philips/ C&S Shakti fixtures/Phillips |
| 34 | Supply and replace old unserviceable surface type fitting,surface type Aesthetically designed 2x2 LED flat panel 36 W for surface mounting which provides soft-light and glare free symmetrical illumination.,including electronic driver completeall as specified and directed. Make: Havells/ WIPRO/Philips/ C&S/Shakti fixtures/Phillips |
| 35 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Havells/ WIPRO/Philips/ C&S/Shakti fixtures/Phillips |
| 36 | Supply and fixing in repairLED building security light light fitting 35 Watt 230 V AC outdoor type with high pressure die including G.I. pipe bracket of suitable size dia for fixing inbuilding security light , 1.2 m long, bracket mounting clamp, bolts and nuts suitable size all as specified and as directed.cast aluminum hosing with driver, complete.Make: Havells/ WIPRO/Philips/ C&S/Shakti fixtures/Phillips |
| 37 | Material and labour for Submain wiring on surface with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts FRLS grade with copper conductor drawn through and including non-metalic rigid PVC conduitand conduit accessories of medium grade notless than 25 mm dia including one run of single core 6 sqmm PVC insulatedunsheathed multistranded 1100 volts FRLS grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main boardincluding removing the existing unserviceable sub main wiringand making good the disturbed surface to match with the existing all as specifiedand as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured as one unit length. |
| 38 | Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Acomplete including taking down unserviceable enclosure all as directed by Engr in Charge.. |
