|
| 1 | 1Material supply |
| 2 | Stone for masonry work |
| 3 | Portland cement |
| 4 | Coarse sand (zone lll) |
| 5 | Structural steel such as tees angle channels and RS joint |
| 6 | steel |
| 7 | Red oxide zinc chromate primer |
| 8 | Sundries |
| 9 | Adjustable tyelescopioc prop 3 m ( 2.02-3.75m) |
| 10 | Beam clamp 300-380mm (450-1070 mm) |
| 11 | Adjustable span ESO+SI (2.35-3.40) |
| 12 | Second class kail wood planks |
| 13 | Scond cl;ass kail wood in scantling |
| 14 | Hollock ballies 125 mm daimeter |
| 15 | Twisted steel / deformed bars |
| 16 | Stone aggregate ( single size ): 20 mm nominal size |
| 17 | Stone aggregate ( single size ): 10 mm nominal size |
| 18 | Hire charge of concrete mixer 0.25 to 0.40 cum with hopper |
| 19 | Vibrator( Needdle typem 40 mm ) |
| 20 | Laterate stone of size 40*20*15cm |
| 21 | Anjil wood scantls |
| 22 | Bright finished or black enemeled mild steel butt hinges 100*58*1.90 mm |
| 23 | Bright finished or black enemeled mild steel butt hinges 50*37*1.50 mm |
| 24 | Bright finished or black enemeled mild steel butt screw 40 mm |
| 25 | Bright finished or black enemeled mild steel butt screw 20 mm |
| 26 | Flats up to 10 mm in thickness |
| 27 | Mild steel round bar 12 mm dia and below |
| 28 | welding by electric plant |
| 29 | Float glass sheet of norminal thickness 4 mm ( weight not less than 10 kg/sqm) |
| 30 | Stone aggregate ( single size ) 40 mm norminal size |
| 31 | Fine sand ( zone IV ) |
| 32 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 33 | Plastic emulsion paint |
| 34 | Synthetic enamel paint in black or chocolate shade |
| 35 | PVC pipe 110 mm outer dia. 4 kgf/cm2 |
| 36 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 37 | PVC pipe 25 mm outer dia. 10 kgf/cm2 |
| 38 | Ceramic glazed tiles 1 st quality 300*300 mm in all shades and designs of white , ivory, gray, fume red brown etc… |
| 39 | Vitreous china flat back wash basin 630*450 mm |
| 40 | 15 mm C.P.brass tap |
| 41 | C.P.brass waste 32 mm |
| 42 | C.I bracket for wash basin and sinks |
| 43 | Stainless steel kitchen sink - with out drain board 470*420 mm bowl dept 178 mm |
| 44 | 200 mm Aluminium aldrop |
| 45 | Iron hooks & eyes 100 mm |