Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #31715076

Supply & Installation Of Submersible Pumping Machinery , Voltage Stabilizer, Chlorination System And Internal House Wiringfor Tube Well No.- 2Ataugmentation Of Gopalpur Waterscheme Under Cmd, Phe Dte., Dist.- Purba-Bardhaman.- 1 Supply & Delivery

Issued by Government Departments · gopalpur, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Apr 2022
0 days left
EMD
20500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
gopalpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply & Installation Of Submersible Pumping Machinery , Voltage Stabilizer, Chlorination System And Internal House Wiringfor Tube Well No.- 2Ataugmentation Of Gopalpur Waterscheme Under Cmd, Phe Dte., Dist.- Purba-Bardhaman.- 1 Supply & Delivery Of The Following Pumping Machinery, Electrical Accessories Etc. At Site.A ) Submersible Pumping Machinery, Directly Coupled With Suitable Size Water Proof Motor Having Following Specifications.P U M Pdischarge ( 30 M3 / H ) H E A D ( 66 Mtr. ) S H A F T.Stainless Steel.Outlet Size. 80Mm. Pump Efficiency In Percentage: Minimum 65.M O T O R ( 12.5Hp ) Submersible Type, 3Ph.50Hz, A.C.- 400Volt +10%, Wet Type Winding, Rpm-2900.Size Of Tubewell : ( 300Mm. X 200Mm.Dia ) . And Length Of Housing Pipe 41.40Mtr.Pump Motor Set Must Be Bee Standard Energy Star Rating ( 3-5 ) As Per Is – 8034:2002Make-Ksb / Pluga / B.G. / Texmo / Approved Make ) .N.B.;- ( I ) H / Q Characteristic Curve Of Pump Set Should Be Submitted Before Delivery. ( Ii ) Test Certificate Of Pump & Motor Should Be Submitted During Delivery & G.C. 2 B ) 4.0 Sq.Mm.3Core, Water Proof Flat Cable, Suitable For Above Pump Set. ( Make-Finolex / Gloster / Mescab / Currency / Crystal / Polycab / Approved Make ) 3 C ) 100 A 4 Way 415 V Wall Mounted Busbar Chamber ( Make ( Havels / Standard / Approved Make ) 4 D ) 100 A Tpn Main Switch With Re-Wirable Fuse Link Within Sheet Steel Enclosure ( Make ( Havels / Standard / Approved Make ) 5 E ) Supply And Delivery Of 25 Mm², 1.1 Kv Grade. 3.5 Core Al Armoured Xlpe Conform To Is 1554 / 7098 ( Part-I ) 1998 ( Make : Gloster / Havells / Mescab / Currency / Polycab / Crystal / Approved Make ) 6 Supply & Delivery Of Following Materials Of Best Quality. A ) 80Mm. N.B. U.P.V.C. Column Pipe 7.1Mm. Thick Having 70Mm. Long 8Tpi Threaded Both Side With Heavy Type Socket & O Ring Biax Technology With Wiring Lock System Non Corrosive High Tensile Having I.S.O. 9001 Standard. ( Make : Ashirbad / Raksha / Approved Make ) . 7 I ) 10Ft. Long ( 3Mtrs ) 8 Ii ) 5Ft. Long ( 1.5Mtrs ) 9 Iii ) 80Mm. Dia. Top & Bottom Adaptor 10 Iv ) 3 Dia. X 5 Ft Long M.S. ( 7.1 Mm Thick ) Column Pipe Having Both Side 11 Tpi Thread And Socket. 11 B ) Heavy Type M.S. Suspension Clamp Of Suitable Dia. Made Of 80Mm×10Mm M.S. Flat With Nuts, Bolts, Washer Etc. ( Suitable For 80Mm. Dia. Column Pipe ) 12 C ) Split Type M.S. Fabricated Tube Well Cover For 300Mm Dia. Tube Well Housing Pipe With Necessary Fittingarrangement Along With Of Column Pipe, Air Pipe, Rope Of Anti Snapping Device & Cable Entry Gland Etc. 13 D ) 102 Mm. Dia. 0-7 Kg. / Sq.Cm. Range, Wall Mounted Pressure Gauge. ( Make: H. Guru / Febig / Approved Make ) . 14 I ) Tube Well Outside The Pump House. ( This Cost Includes 15Mm. Dia. G.I. Pipe Tata Medium Of Appx. 30Ft. Length & Specials ) 15 E ) Depth Gauge ( Make: H. Guru / Febig / Approved Make ) Of 102Mm. Dia. With Steel Air Pipe Of Reqd. Length ( 85Ft ) With All Others Fittings & Accessories For The Above Work Including Supplying In One Good Quality Hand Pump. I ) Tube Well Outside The Pump House. ( This Cost Includes 15Mm. Dia. G.I Pipe Of Appx. 30Ft Length & Specials ) 16 F ) Anti Snapping Safety Device Made Of Suitable Size & Heavy Type M.S. Fabricated Busket For Resting The Above Pump Set, With Eye Bolt / H. Bolt 25.Mm.Dia. Arrangement ( 4 Ends ) , Clamps For Holding Pump Motor, Nuts & Bolts Etc. Complete As Per Direction Eic. Including 10Mm.Dia. Stranded Steel Wire Rope Or 16Mm Dia. Nylone Rope For Hanging Of Anti Snapping Safety Device As Per Direction Of Eic. 17 G ) 80Mm.Dia. Cidf Non Rising Spindle Sluice Valve ( Is: 14846 ) With Pn1.0 Pressure Rating As Per I.S. Specification & Other Required Materials For The Job I.E For Completing The Construction Of Delivery And Wash Out Line. ( Make:- Ivi / Upadhya / Kirloskar / Durga / Jupiter / Magnet / Cair / Mcwane / Sigma Flow / Approved Make ) .N.B: I ) Test Certificates For Both Valves Should Be Submitted At The Time Of Delivery. Ii ) M. S. Specials Should Have Minimum 7Mm.Thickness. 18 H ) Ø80 Mm Cidf Single Door Swing Non Return Valve ( Is: 5312, Part-I ) With Pn1.0 Pressure Rating, ( Make:-Ivi / Upadhya / Kirloskar / Durga / Jupiter / Magnet / Cair / Mcwane / Sigma Flow / Approved Make ) . 19 I ) 80Mm Dia. Three Phase, ( 415V ) , Actuator Operated Wafer Type Butterfly Valve ( Bs: 5155 ) With Pn1.0 Pressure Rating, Having Valve Body Of Ci ( Is: 210, Gr. Fg: 260 ) . & Shaft Of Stainless Steel ( Aisi- 410 ) . 20 J ) Ø3 X 2.75 Mtr Cidf Pipe 21 K ) Ø3 X 1.0 Mtr Cidf Pipe 22 L ) Ø 3 X 2-6 Cidf Pipe 23 M ) Ø 3 X 2 Ft Cidf Pipe 24 N ) Ø 3 Flanged Tail Piece 25 O ) Ø 3Cidf Bend 26 P ) Steel Plug, M. S. Nipple, Flange, Nuts, Bolts Etc 27 Q ) Ø 3 M. S. Cross 28 Supply, Delivery & Fitting Fixing Of Wall Mounted 2Mm.Thick, Crca Sheet Steel, Powder Coating Finish Painted, Dust & Vermin Proof, Generally Conforming To Ip-54 Degree Of Protection Front Open Fully Automatic ( Plc Operated ) Cum Manual Motor Control Centre Along With Electrically Operated Valve Unit Complete With Following Components Suitable For Pump, 7.5H.P. To 12.5H.P. In S / D Operating Mode, Three Phase Butterfly Valve Actuator, 0.5 H.P Chlorinator, Auto Lighting Arrangement & Internal Wiring.The Panel Shall Be Equipped By Complete Wiring With Following Devices. I. 1 ) Incomer A ) Suitable Capacity Mccb, Tpn ( 100 Amp ) ( L&T / Havells ) .B ) 96Sqmm. ( 0-60A ) , Digital Ammeter With Selector Switch & C.T .S ( Ae ) . C ) 96Sq.Mm. ( 0 – 500 Volt ) Digital Voltmeter With Selector Switch. ( Ae ) D ) Red, Yellow & Blue ( Led Type ) Phase Indicator Lamps.- ( Kaycee ) - 3Nos.2 ) Outgoingauto / Manual Star- Delta Starter With Mpcb Along With Actuator Operated Butterfly Valve.A ) Suitable Capacity, Tp, Air Break Type Power Contactor With 240 Volt A. C. Coil For Pump Motor.– 3Nos. B ) Micro Processor Based Digital Motor Protection Relay With Over Load, Locked Rotor & Phase Reversal / Single Phase Protection For Pump Motor. Make:Bch ( Bocr-Dsb ) 29 C ) Electronic Stat-Delta Timer 0-30Sec. ( Range ) -1No.D ) Programmable Logical Control ( Plc ) With Suitable I / P & O / P For Sequence Of Automatic Operation Of Pump-Motor & Valves Actuator With 24V D.C Power Supply Unit-1No. E ) Over Voltage / Under Voltage Protection Relay. 1 No.F ) Auxiliary Contactor & Timers For Auto Manual Control Logic.-1Setg ) Suitable Capacity Capacitor. -1Seth ) Tp, Mcb For Capacitor Back Up Protection.-1Noi ) Suitable Capacity Tp, Air Break Contactor For Switching Of Capacitor.J ) Electronic On Delay Timer For Delayed Switching Of Capacitor. -1No.K ) Auto / Manual Selector Switch. -1No.L ) 6Amp, Sp, Mcb For Control Circuit. -1No.M ) Suitable Capacity Contractor For Forward & Reversed Movement Of Single Phase Actuator Including Overload Relay. – 1 Set.Ii. Starter For1.0 H. P. To 2.0 H. P.Chlorine Machine.A ) 9Amp, Tp, 240 Volt, A. C. Coil, Contactor, For Chlorinator. – 1No. 30 B ) Metallic Over Load Relay Of Range 1.5 To 3.0 Amp For Chlorinator.C ) Level Controller Circuit For Chlorine Tank.Iii. Yard Lighting Arrangement.A ) 9 Amp, Tp, 240Volt A.C. Coil Contactor. -1No.B ) Programmable Digital Timer For Auto / Manual Operation.Note :The Following 3 Items ( A, B & C ) Are Common For Above I, Ii & Iiia ) On / Off / Trip Indicating Lamp For Pump Motor / Valve Actuator / Chlorinator.– 1Set.B ) Start / Stop, Forwarded / Reverse Push Button For Manual Operation Of Pump Motor, Actuator & Chlorinator. C ) Power Terminals For Pump Motor / Tpn Yard Lighting / Chlorine Motor Along With Level Controller / Spn Internal Wiring / Valve Actuator-1Set. ( Make: Rnr / Ecs / Pcf Project / Jolly Engineering Pvt. Ltd. / Approved Make ) 31 Making Brick Pillar For Supporting Pipe Line ( 10 X 10 X4 Ft ) By 1St Class Brick Work With 4 :1 Plaster And Net Cement Punning Complete Including Earth Cutting, Supplying Necessary Materials , Ramming As Per Direction Of Eic. 32 Installation Of The Item No. ( 1 ) To ( 3 ) With Necessary Connection Complete Including Supply 12Core 1.5Sq.Mm. Copper Control Cable Compensating Ms Flange Nut And Bolts Gasket & Other Fixing Materials To Complete The Job And Making Platform Of Required Size Around T.W. With Bricks, Cement , Sand Stone Chips Etc ( 4:2:1 ) Including Plastering And Net Cement Complete As Per Direction And Entire Satisfaction Of The E.I.C. 33 Supplying & Fixing Compression Type Gland Complete With Brass Gland, Brass Ring & Rubber Ring For Dust & Moisture-Proof Entry Of 25Sq.Mm. Xlpe Armoured Cables 34 Finishing The End Of 25Sq.Mm. 31 / 2 Core Xlpe Armoured Cables By Crimping Method Including Supplying And Fixing Solderless Socket ( Dowels Make ) , Tapes, Anticorrosive Paste & Jointing Materials With Including Proper Sealing Of Cable Entry Point 35 Making Necessary Non Metalic Pipe Is-14930 ( 80Mm. Dia. ) Protection For Submersible Cable From Tube Well Cover To Inside Of The Pump House Including Supplying Pipe, Elbow, Union, Short Piece, Socket Etc. Complete For The Job As Per Direction. 36 Double Eathing With 50Mm. Dia. Tata – Medium G.I. Pipe 3.64Mm. Thick × 3.04Mtr. Long And 2×4Swg Gi ( Hot Dip ) Wire ( 4Mtr. Long ) , 13Mm. Dia. × 80Mm. Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fitting 15Mm. Dia. G.I. Pipe Protection ( 1Mtrs. Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Overage Depth Of 3.65Mtrs. Below The Ground Level & Restoring Surface Duly Rammed. 37 Supply, Delivery And Storage At Siteof Automatically Controlled Diaphragm Type Chlorinator Dosing Pump With Flow Rate 100 Lph And Maximum Pressure Of 10Kg / Cm2 With All Accessories For Pump & Motor, Foundation Bolt, Suction And Discharge Flange And With Storage Tank Of Dosing Solution Of 100Ltr. Capacity And The Prime Mover To Be Coupled With Pump Of 0.5 H.P. 3 Phase, 1450 Rpm Squirrel Cage Tefc Induciton Motor, Motor Will Be Ie2 / Ie3 ( Make Of Machine : Swelore / Any Other Approved, Make Of Motor : Abb / Cgl / Kec / Any Other Approved Make ) 38 Installtion And Commissioning Of Above Supplied Chlorinator With All Accessories, Pvc Tank And Drawing Of Power Line As Per Ie Rules By Supplying Of Necessary Wire And Continuous Earthing. This Include The Cost Of All Necessary Cc Foundation [ At Least 200Mm Height ] With Concrete Mixture [ Sand, Cement, Stone Chips ] And Neat Cement Finish By Supplyig Of All Required Materials And Testing The Entire Set As Per Direction Of Eic [ Power Will Be Feed From Plc Panel Of Pumping Machinery ] 39 Distribution Wiring In 1.1Kv. Grade, ( 2X1.5Mm2 ) Single Core Stranded Fr Pvc Insulated & Unsheathed Copper Wire ( Approved Make ) In Suitable Size Pvc Casing Capping ( Precision Make ) With ( 1.5 Sqmm ) Single Core Stranded Fr Pvc Insulted & Unsheathed Copper Wire For Ecc, Including Necessary Pvc Clips, Fittings Etc. To Light / Fan Point With Piano Key Type Switch ( Anchor Make ) Fixed On Sheet Steel Fabricated Switch Board With Perspex / Bakelite Top Cover On Wall Including Necessary Connections And Making Earthing Attachment And Mending Good Damages To Building Works. [ Pvc Casing-Capping And Switch Board Both On Surface ] 40 A ) Average Run 4. 5 Mtr. - 41 Supply And Fitting Fixing Of 40A Dp Isolator ( Make : Havells / Standard ) 42 Supply And Delivery Of Cfl , 23 Watt, ( Make-Phillips / Other Approvedmake ) 43 Supply And Fitting Fixing Of Ceiling Fan ( Make: Usha / Crompton / Havels / Other Approvedmake ) 1200Mm. Sweep Complete With Blade, Rubber Bush Etc. Including Supply And Fixing 2×1 / 1.4 Pvc Copper Wire For Down Rod With Making Necessary Connection Complete. 44 Supply & Fitting Fixing Of 10 Watt, Led Fixture Set ----------For Phillips Model No. Brp 020 / 10 Led ( Make: Phillps / Other Approved Make ) With 40Mm. Dia. × 2.5Mtr. Long G.I Pipe Bracket Fixing On Wall Of The Pump House With 3Nos. M. S. Clamp Properly Grouting Including Making Power Connection With Supply And Drawing 2.5Sq.Mm. Copper Flexible Cable Wire With Controlling Sub Switch And Continuous Earthing From Nearest Junction Board All Complete As Per Direction Of E.I.C. 45 Supply Of 4Ft. 36W Double Fluorescent Light Fittings Complete With All Accessories Including 2Nos. 36W Tube Light Incl. Fixing Lightfitting On Wall By Means L Clamp, Nipple, Suitable Size Fastner And Connection By 1.5 Sqmm Pvc / Cu Wire As To G S. Model :- Tmc0552xtld36webt ( Make- Philips / Havells / Bajaj / Other Approvedmake ) 46 Supply And Fixing Bulkhead Lightfittingson Wall Incl. Connection. As To Gs .Make -Bajaj / Havells / Other Approvedmake ) 47 Supply And Delivery At Site A.C. 3 Ph. Oil Cooled Type Voltage Stabilizer Suitable For Unbalanced Input Voltage With Following Specification. ( Make: Ae / Sen & Pandit / Opto Elect. / Ecs / Fiji / Any Approved Make ) A ) Input:250-500 V, 3Ph., 50Hz, 4 Wireb ) Output, 415V + 1% 3Ph., 50Hz.C ) Capacity: 20 Kva.D ) Auto Manual Switch. Is- 9815 ( I ) E ) Raise / Lower Push Button.F ) Single Lamps To Indicate And Limits Of Input.G ) Voltmeter For Input And Output Voltage. ( Manufacturing Test Certificate Should Be Produced At The Time Of Delivery ) H ) With U / V.O. / V.O. / L Protection With Contractor At Output Side, Input Mcb & Ammeter Etc. ( Tc / Gc Needed ) . 48 Supply The Following Electrical Accessories At Site. 49 A ) 100Amp. 4 Pole 415V Tpn Off Load Change Over Switch ( Make : Standard / Havells’ / Abb / Siemens ) 50 B ) 100 A Tpn Main Switch With Re-Wirable Fuse Link Within Sheet Steel Enclosure ( Make ( Havels / Standard / Approved Make ) 51 C ) 25 Mm², 1.1 Kv Grade. 3.5 Core Al Armoured Xlpe Conform To Is 1554 / 7098 ( Part-I ) 1998 ( Make : Gloster / Havells / Mescab / Currency / Polycab / Crystal / Approved Make ) 52 Installation Of The Above Voltage Stabilizer Of ( Item No.-1 To 2 ) On The Foundation Incl. Interconnection Complete & Testing The Voltage Stabilizer Along With Other Electrical Equipments To Ensure Performance Of The Equipments In Running Satisfactorily As Per Ie Rules & As Per Direction Of E.I.C. Incl. Testing Commissioning Complete. 53 Add. Gst@12% 54 Add. Cess@1%

BOQ

Name of Work: Supply & Installation of Submersible Pumping Machinery , Voltage Stabilizer,Chlorination system and internal House wiringfor Tube well no.- 2atAugmentation of Gopalpur WaterScheme under CMD, PHE Dte., Dist.- Purba-Bardhaman.
Sl. No. Item Description
1Supply & delivery of the following Pumping machinery, Electrical accessories etc. at site.a) Submersible Pumping Machinery, directly coupled with suitable size water proof motor having following specifications.P U M PDISCHARGE ( 30 M3/H)H E A D (66 mtr.)S H A F T.Stainless Steel.OUTLET SIZE. 80mm. PUMP EFFICIENCY IN PERCENTAGE: Minimum 65.M O T O R(12.5HP)Submersible type, 3ph.50Hz, A.C.- 400Volt +10%,wet type winding, RPM-2900.SIZE OF TUBEWELL : (300mm. x 200mm.dia). and length of Housing pipe 41.40mtr.Pump motor set must be BEE standard energy star rating (3-5) as per IS – 8034:2002Make-KSB/PLUGA/B.G./TEXMO/ Approved Make).N.B.;- (I) H/Q Characteristic Curve of pump set should be submitted before delivery. (II) Test certificate of pump & motor should be submitted during delivery & G.C.
2b) 4.0 sq.mm.3core, water proof flat cable, suitable for above pump set. (Make-FINOLEX /GLOSTER /MESCAB /CURRENCY/Crystal /Polycab/ Approved Make)
3c) 100 A 4 way 415 V wall mounted Busbar Chamber (make (Havels/Standard/Approved Make)
4d) 100 A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make)
5e) Supply and Delivery of 25 mm², 1.1 KV grade. 3.5 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make)
6Supply & delivery of following materials of best quality. a) 80mm. N.B. U.P.V.C. column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type socket & O ring biax technology with wiring lock system non corrosive high tensile having I.S.O. 9001 standard. (Make : Ashirbad/Raksha/ Approved Make).
7i) 10ft. long (3mtrs)
8ii) 5ft. long (1.5mtrs)
9iii) 80mm. dia. top & bottom adaptor
10iv) 3 \" dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket.
11b) Heavy type M.S. Suspension clamp of suitable dia. made of 80mm×10mm M.S. flat with nuts, bolts, washer etc.( suitable for 80mm. dia. column pipe)
12c) Split type M.S. fabricated tube well cover for 300mm dia. tube well housing pipe with necessary fittingarrangement along with of column pipe, Air pipe, rope of anti snapping device & cable entry gland etc.
13d) 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge. (Make: H. Guru/Febig/ Approved Make).
14i) Tube well outside the pump house. (This cost includes 15mm. dia. G.I. pipe Tata medium of appx. 30ft. length & specials)
15e) Depth gauge (Make: H. Guru/Febig/ Approved Make) of 102mm. dia. with steel Air pipe of reqd. length (85ft) with all others fittings & accessories for the above work including supplying in one good quality hand pump. i) Tube well outside the pump house.(This cost includes 15mm. dia. G.I pipe of appx. 30ft length & Specials)
16f) Anti snapping safety device made of suitable size & heavy type M.S. fabricated busket for resting the above pump set, with eye bolt/H. bolt 25.mm.dia. arrangement (4 ends), clamps for holding pump motor, Nuts & bolts etc. complete as per direction EIC. including 10mm.dia. stranded steel wire rope or 16mm dia. Nylone rope for hanging of anti snapping safety device as per direction of EIC.
17g) 80mm.dia. CIDF Non Rising Spindle Sluice Valve (IS: 14846) with PN1.0 Pressure Rating as per I.S. specification & other required materials for the job i.e for completing the construction of delivery and wash out line.(Make:- IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make).N.B: I) Test certificates for both valves should be submitted at the time of delivery. II) M. S. Specials should have minimum 7mm.Thickness.
18h) Ø80 mm CIDF single door swing Non Return Valve (IS: 5312, Part-I) with PN1.0 Pressure Rating, (Make:-IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make).
19i) 80mm dia. Three phase, (415V), Actuator operated Wafer type Butterfly Valve (BS: 5155) with PN1.0 Pressure Rating, having valve body of CI(IS: 210, Gr. FG: 260). & shaft of stainless steel (AISI- 410).
20j) Ø3 \" X 2.75 mtr CIDF Pipe
21k) Ø3 \" X 1.0 mtr CIDF Pipe
22l) Ø 3 \" X 2\"-6\" CIDF Pipe
23m) Ø 3 \" X 2 ft CIDF Pipe
24n) Ø 3 \"Flanged tail piece
25o) Ø 3\"CIDF Bend
26p)Steel Plug, M. S. Nipple, Flange, Nuts, Bolts etc
27q) Ø 3 \"M. S. Cross
28Supply, delivery & fitting fixing of wall mounted 2mm.thick, CRCA sheet steel, powder coating finish painted, dust & vermin proof, generally conforming to IP-54 Degree of protection front open fully automatic( PLC operated ) cum manual Motor Control Centre along with electrically operated valve unit complete with following components suitable for pump, 7.5H.P. to 12.5H.P. in S / D operating mode, Three phase Butterfly Valve Actuator, 0.5 H.P Chlorinator, Auto Lighting Arrangement & internal wiring.The panel shall be equipped by complete wiring with following devices. I. 1) Incomer a) Suitable capacity MCCB, TPN (100 Amp) (L&T/HAVELLS).b) 96Sqmm. (0-60A), Digital Ammeter with selector switch & C.T .s (AE). c) 96Sq.mm.(0 – 500 Volt) Digital Voltmeter with selector switch. (AE) d) Red, Yellow & Blue (LED type) Phase indicator lamps.- (KAYCEE)- 3nos.2) OutgoingAuto/Manual Star- Delta Starter with MPCB along with Actuator operated Butterfly Valve.a) Suitable capacity, TP, Air Break type Power Contactor with 240 Volt A. C. Coil for Pump Motor.– 3nos. b) Micro Processor based Digital Motor Protection Relay with Over load, Locked Rotor & Phase Reversal/ Single Phase protection for Pump Motor. Make:BCH(BOCR-DSB)
29c) Electronic Stat-Delta timer 0-30sec.(range) -1no.d) Programmable logical control (PLC) with suitable i/p & o/p for sequence of automatic operation of Pump-Motor & Valves actuator with 24V D.C power supply unit-1no. e) Over Voltage/ Under Voltage Protection Relay. 1 no.f) Auxiliary Contactor & Timers for Auto Manual Control Logic.-1setg) Suitable capacity Capacitor. -1seth) TP, MCB for Capacitor back up protection.-1noi) Suitable capacity TP, Air Break Contactor for switching of Capacitor.j) Electronic ON Delay Timer for delayed switching of Capacitor. -1no.k) Auto/Manual Selector Switch. -1no.l) 6Amp, SP, MCB for Control Circuit. -1no.m) Suitable capacity contractor for forward & reversed movement of single phase actuator including overload relay. – 1 set.II. Starter for1.0 H. P. to 2.0 H. P.Chlorine Machine.a) 9Amp, TP, 240 Volt, A. C. Coil, Contactor, for Chlorinator. – 1no.
30b)Metallic Over load Relay of Range 1.5 to 3.0 Amp for Chlorinator.c) Level Controller Circuit for Chlorine Tank.III. Yard Lighting Arrangement.a) 9 Amp, TP, 240Volt A.C. Coil Contactor. -1no.b) Programmable Digital Timer for Auto/Manual operation.Note :The following 3 items ( a, b & c) are common for above I,II & IIIa) ON/OFF/ Trip Indicating Lamp for Pump Motor/Valve Actuator/Chlorinator.– 1set.b) Start/Stop, Forwarded/Reverse Push Button for Manual operation of Pump Motor, Actuator & Chlorinator. c) Power Terminals for Pump Motor/TPN Yard Lighting/ Chlorine Motor along with Level Controller/SPN internal wiring/Valve Actuator-1set. (Make: RNR/ECS/PCF Project/Jolly Engineering Pvt. Ltd./Approved Make)
31Making Brick Pillar for Supporting pipe line (10\" X 10 \" X4 ft) by 1st class brick work with 4 :1 plaster and net cement punning complete including earth cutting, supplying necessary materials , ramming as per direction of EIC.
32Installation of the item no. (1) to (3) with necessary connection complete including supply 12core 1.5sq.mm. copper control cable compensating MS flange nut and Bolts Gasket & other fixing materials to complete the job and making platform of required size around T.W. with bricks, cement , sand stone chips etc(4:2:1) including plastering and net cement complete as per direction and entire satisfaction of the E.I.C.
33Supplying & fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 25Sq.mm. XLPE Armoured cables
34Finishing the end of 25Sq.mm. 31/2 core XLPE Armoured cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials with including proper sealing of cable entry point
35Making necessary non metalic pipe IS-14930 (80mm. dia.) protection for submersible cable from Tube well cover to inside of the pump house including supplying pipe, Elbow, Union, short piece, socket etc. complete for the job as per direction.
36Double eathing with 50mm. dia. TATA – Medium G.I. pipe 3.64mm. thick × 3.04Mtr. long and 2×4SWG GI (Hot Dip) wire (4Mtr. long), 13mm. dia. × 80mm. long GI bolts, double nuts, double washers including supply & fitting 15mm. dia. G.I. pipe protection (1Mtrs. Long) to be filled with bitumen partly under the ground level and partly above ground level driven to an overage depth of 3.65Mtrs. below the ground level & restoring surface duly rammed.
37Supply, delivery and storage at siteof automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10Kg/CM2 with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 3 Phase, 1450 RPM squirrel cage TEFC induciton motor, Motor will be IE2/IE3 (Make of Machine : Swelore/Any other approved, Make of Motor : ABB / CGL /KEC / Any other approved make)
38Installtion and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC [power will be feed from PLC Panel of pumping machinery]
39Distribution wiring in 1.1KV. Grade, (2X1.5mm2) single core stranded \"FR\" PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with (1.5 Sqmm) single core stranded \"FR\" PVC insulted & unsheathed copper wire for ECC, including necessary PVC clips, fittings etc. to light/fan point with piano key type switch (anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall including necessary connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]
40a) average run 4. 5 mtr. -
41Supply and fitting fixing of 40A DP Isolator (Make : Havells/Standard)
42Supply and delivery of CFL , 23 watt, (Make-phillips/ other approvedmake)
43Supply and fitting fixing of Ceiling fan (Make: Usha /Crompton/Havels/ other approvedmake) 1200mm. sweep complete with blade, rubber bush etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete.
44Supply & fitting fixing of 10 watt, LED Fixture set ----------for Phillips Model no. BRP 020/10 LED (Make: Phillps/ Other Approved Make) with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C.
45Supply of 4ft. 36W Double Fluorescent light fittings complete with all accessories including 2nos. 36W tube light incl. fixing lightfitting on wall by means L clamp, nipple, suitable size fastner and connection by 1.5 sqmm PVC/Cu wire as to G S. Model :- TMC0552XTLD36WEBT ( Make- Philips/Havells/Bajaj/ other approvedmake)
46Supply and fixing bulkhead lightfittingson wall incl. connection. As to Gs .Make -Bajaj/Havells/ other approvedmake)
47Supply and delivery at site A.C. 3 ph. Oil Cooled type Voltage Stabilizer suitable for unbalanced input voltage with following specification. (Make: AE / Sen & Pandit / Opto Elect. / ECS /Fiji /Any Approved Make)a) Input:250-500 V, 3ph., 50HZ, 4 wireb) Output, 415V + 1% 3ph.,50HZ.c) Capacity: 20 KVA.d) Auto manual switch. IS- 9815(I)e) Raise/lower push Button.f) Single lamps to indicate and limits of input.g) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery)h) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. (TC/GC needed).
48Supply the following Electrical Accessories at site.
49a) 100Amp. 4 pole 415V TPN OFF load Change over Switch (Make : Standard/Havells’/ABB/Siemens)
50b) 100 A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make)
51c) 25 mm², 1.1 KV grade. 3.5 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make)
52Installation of the above Voltage stabilizer of (Item No.-1 to 2) on the foundation incl. Interconnection complete & testing the voltage stabilizer along with other electrical equipments to ensure performance of the equipments in running satisfactorily as per IE Rules & as per direction of E.I.C. incl. testing commissioning complete.
53Add. GST@12%
54Add. Cess@1%

AI Tender Summary

OUR REF NO 31715076
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 26-04-2022
Authority
Authority Name Public Health Engineering Department
Work Description Supply & Installation Of Submersible Pumping Machinery , Voltage Stabilizer, Chlorination System And Internal House Wiringfor Tube Well No.- 2Ataugmentation Of Gopalpur Waterscheme Under Cmd, Phe Dte., Dist.- Purba-Bardhaman.- 1 Supply & Delivery Of The Following Pumping Machinery, Electrical Accessories Etc. At Site.A ) Submersible Pumping Machinery, Directly Coupled With Suitable Size Water Proof Motor Having Following Specifications.P U M Pdischarge ( 30 M3 / H ) H E A D ( 66 Mtr. ) S H A F T.Stainless Steel.Outlet Size. 80Mm. Pump Efficiency In Percentage: Minimum 65.M O T O R ( 12.5Hp ) Submersible Type, 3Ph.50Hz, A.C.- 400Volt +10%, Wet Type Winding, Rpm-2900.Size Of Tubewell : ( 300Mm. X 200Mm.Dia ) . And Length Of Housing Pipe 41.40Mtr.Pump Motor Set Must Be Bee Standard Energy Star Rating ( 3-5 ) As Per Is – 8034:2002Make-Ksb / Pluga / B.G. / Texmo / Approved Make ) .N.B.;- ( I ) H / Q Characteristic Curve Of Pump Set Should Be Submitted Before Delivery. ( Ii ) Test Certificate Of Pump & Motor Should Be Submitted During Delivery & G.C. 2 B ) 4.0 Sq.Mm.3Core, Water Proof Flat Cable, Suitable For Above Pump Set. ( Make-Finolex / Gloster / Mescab / Currency / Crystal / Polycab / Approved Make ) 3 C ) 100 A 4 Way 415 V Wall Mounted Busbar Chamber ( Make ( Havels / Standard / Approved Make ) 4 D ) 100 A Tpn Main Switch With Re-Wirable Fuse Link Within Sheet Steel Enclosure ( Make ( Havels / Standard / Approved Make ) 5 E ) Supply And Delivery Of 25 Mm², 1.1 Kv Grade. 3.5 Core Al Armoured Xlpe Conform To Is 1554 / 7098 ( Part-I ) 1998 ( Make : Gloster / Havells / Mescab / Currency / Polycab / Crystal / Approved Make ) 6 Supply & Delivery Of Following Materials Of Best Quality. A ) 80Mm. N.B. U.P.V.C. Column Pipe 7.1Mm. Thick Having 70Mm. Long 8Tpi Threaded Both Side With Heavy Type Socket & O Ring Biax Technology With Wiring Lock System Non Corrosive High Tensile Having I.S.O. 9001 Standard. ( Make : Ashirbad / Raksha / Approved Make ) . 7 I ) 10Ft. Long ( 3Mtrs ) 8 Ii ) 5Ft. Long ( 1.5Mtrs ) 9 Iii ) 80Mm. Dia. Top & Bottom Adaptor 10 Iv ) 3 Dia. X 5 Ft Long M.S. ( 7.1 Mm Thick ) Column Pipe Having Both Side 11 Tpi Thread And Socket. 11 B ) Heavy Type M.S. Suspension Clamp Of Suitable Dia. Made Of 80Mm×10Mm M.S. Flat With Nuts, Bolts, Washer Etc. ( Suitable For 80Mm. Dia. Column Pipe ) 12 C ) Split Type M.S. Fabricated Tube Well Cover For 300Mm Dia. Tube Well Housing Pipe With Necessary Fittingarrangement Along With Of Column Pipe, Air Pipe, Rope Of Anti Snapping Device & Cable Entry Gland Etc. 13 D ) 102 Mm. Dia. 0-7 Kg. / Sq.Cm. Range, Wall Mounted Pressure Gauge. ( Make: H. Guru / Febig / Approved Make ) . 14 I ) Tube Well Outside The Pump House. ( This Cost Includes 15Mm. Dia. G.I. Pipe Tata Medium Of Appx. 30Ft. Length & Specials ) 15 E ) Depth Gauge ( Make: H. Guru / Febig / Approved Make ) Of 102Mm. Dia. With Steel Air Pipe Of Reqd. Length ( 85Ft ) With All Others Fittings & Accessories For The Above Work Including Supplying In One Good Quality Hand Pump. I ) Tube Well Outside The Pump House. ( This Cost Includes 15Mm. Dia. G.I Pipe Of Appx. 30Ft Length & Specials ) 16 F ) Anti Snapping Safety Device Made Of Suitable Size & Heavy Type M.S. Fabricated Busket For Resting The Above Pump Set, With Eye Bolt / H. Bolt 25.Mm.Dia. Arrangement ( 4 Ends ) , Clamps For Holding Pump Motor, Nuts & Bolts Etc. Complete As Per Direction Eic. Including 10Mm.Dia. Stranded Steel Wire Rope Or 16Mm Dia. Nylone Rope For Hanging Of Anti Snapping Safety Device As Per Direction Of Eic. 17 G ) 80Mm.Dia. Cidf Non Rising Spindle Sluice Valve ( Is: 14846 ) With Pn1.0 Pressure Rating As Per I.S. Specification & Other Required Materials For The Job I.E For Completing The Construction Of Delivery And Wash Out Line. ( Make:- Ivi / Upadhya / Kirloskar / Durga / Jupiter / Magnet / Cair / Mcwane / Sigma Flow / Approved Make ) .N.B: I ) Test Certificates For Both Valves Should Be Submitted At The Time Of Delivery. Ii ) M. S. Specials Should Have Minimum 7Mm.Thickness. 18 H ) Ø80 Mm Cidf Single Door Swing Non Return Valve ( Is: 5312, Part-I ) With Pn1.0 Pressure Rating, ( Make:-Ivi / Upadhya / Kirloskar / Durga / Jupiter / Magnet / Cair / Mcwane / Sigma Flow / Approved Make ) . 19 I ) 80Mm Dia. Three Phase, ( 415V ) , Actuator Operated Wafer Type Butterfly Valve ( Bs: 5155 ) With Pn1.0 Pressure Rating, Having Valve Body Of Ci ( Is: 210, Gr. Fg: 260 ) . & Shaft Of Stainless Steel ( Aisi- 410 ) . 20 J ) Ø3 X 2.75 Mtr Cidf Pipe 21 K ) Ø3 X 1.0 Mtr Cidf Pipe 22 L ) Ø 3 X 2-6 Cidf Pipe 23 M ) Ø 3 X 2 Ft Cidf Pipe 24 N ) Ø 3 Flanged Tail Piece 25 O ) Ø 3Cidf Bend 26 P ) Steel Plug, M. S. Nipple, Flange, Nuts, Bolts Etc 27 Q ) Ø 3 M. S. Cross 28 Supply, Delivery & Fitting Fixing Of Wall Mounted 2Mm.Thick, Crca Sheet Steel, Powder Coating Finish Painted, Dust & Vermin Proof, Generally Conforming To Ip-54 Degree Of Protection Front Open Fully Automatic ( Plc Operated ) Cum Manual Motor Control Centre Along With Electrically Operated Valve Unit Complete With Following Components Suitable For Pump, 7.5H.P. To 12.5H.P. In S / D Operating Mode, Three Phase Butterfly Valve Actuator, 0.5 H.P Chlorinator, Auto Lighting Arrangement & Internal Wiring.The Panel Shall Be Equipped By Complete Wiring With Following Devices. I. 1 ) Incomer A ) Suitable Capacity Mccb, Tpn ( 100 Amp ) ( L&T / Havells ) .B ) 96Sqmm. ( 0-60A ) , Digital Ammeter With Selector Switch & C.T .S ( Ae ) . C ) 96Sq.Mm. ( 0 – 500 Volt ) Digital Voltmeter With Selector Switch. ( Ae ) D ) Red, Yellow & Blue ( Led Type ) Phase Indicator Lamps.- ( Kaycee ) - 3Nos.2 ) Outgoingauto / Manual Star- Delta Starter With Mpcb Along With Actuator Operated Butterfly Valve.A ) Suitable Capacity, Tp, Air Break Type Power Contactor With 240 Volt A. C. Coil For Pump Motor.– 3Nos. B ) Micro Processor Based Digital Motor Protection Relay With Over Load, Locked Rotor & Phase Reversal / Single Phase Protection For Pump Motor. Make:Bch ( Bocr-Dsb ) 29 C ) Electronic Stat-Delta Timer 0-30Sec. ( Range ) -1No.D ) Programmable Logical Control ( Plc ) With Suitable I / P & O / P For Sequence Of Automatic Operation Of Pump-Motor & Valves Actuator With 24V D.C Power Supply Unit-1No. E ) Over Voltage / Under Voltage Protection Relay. 1 No.F ) Auxiliary Contactor & Timers For Auto Manual Control Logic.-1Setg ) Suitable Capacity Capacitor. -1Seth ) Tp, Mcb For Capacitor Back Up Protection.-1Noi ) Suitable Capacity Tp, Air Break Contactor For Switching Of Capacitor.J ) Electronic On Delay Timer For Delayed Switching Of Capacitor. -1No.K ) Auto / Manual Selector Switch. -1No.L ) 6Amp, Sp, Mcb For Control Circuit. -1No.M ) Suitable Capacity Contractor For Forward & Reversed Movement Of Single Phase Actuator Including Overload Relay. – 1 Set.Ii. Starter For1.0 H. P. To 2.0 H. P.Chlorine Machine.A ) 9Amp, Tp, 240 Volt, A. C. Coil, Contactor, For Chlorinator. – 1No. 30 B ) Metallic Over Load Relay Of Range 1.5 To 3.0 Amp For Chlorinator.C ) Level Controller Circuit For Chlorine Tank.Iii. Yard Lighting Arrangement.A ) 9 Amp, Tp, 240Volt A.C. Coil Contactor. -1No.B ) Programmable Digital Timer For Auto / Manual Operation.Note :The Following 3 Items ( A, B & C ) Are Common For Above I, Ii & Iiia ) On / Off / Trip Indicating Lamp For Pump Motor / Valve Actuator / Chlorinator.– 1Set.B ) Start / Stop, Forwarded / Reverse Push Button For Manual Operation Of Pump Motor, Actuator & Chlorinator. C ) Power Terminals For Pump Motor / Tpn Yard Lighting / Chlorine Motor Along With Level Controller / Spn Internal Wiring / Valve Actuator-1Set. ( Make: Rnr / Ecs / Pcf Project / Jolly Engineering Pvt. Ltd. / Approved Make ) 31 Making Brick Pillar For Supporting Pipe Line ( 10 X 10 X4 Ft ) By 1St Class Brick Work With 4 :1 Plaster And Net Cement Punning Complete Including Earth Cutting, Supplying Necessary Materials , Ramming As Per Direction Of Eic. 32 Installation Of The Item No. ( 1 ) To ( 3 ) With Necessary Connection Complete Including Supply 12Core 1.5Sq.Mm. Copper Control Cable Compensating Ms Flange Nut And Bolts Gasket & Other Fixing Materials To Complete The Job And Making Platform Of Required Size Around T.W. With Bricks, Cement , Sand Stone Chips Etc ( 4:2:1 ) Including Plastering And Net Cement Complete As Per Direction And Entire Satisfaction Of The E.I.C. 33 Supplying & Fixing Compression Type Gland Complete With Brass Gland, Brass Ring & Rubber Ring For Dust & Moisture-Proof Entry Of 25Sq.Mm. Xlpe Armoured Cables 34 Finishing The End Of 25Sq.Mm. 31 / 2 Core Xlpe Armoured Cables By Crimping Method Including Supplying And Fixing Solderless Socket ( Dowels Make ) , Tapes, Anticorrosive Paste & Jointing Materials With Including Proper Sealing Of Cable Entry Point 35 Making Necessary Non Metalic Pipe Is-14930 ( 80Mm. Dia. ) Protection For Submersible Cable From Tube Well Cover To Inside Of The Pump House Including Supplying Pipe, Elbow, Union, Short Piece, Socket Etc. Complete For The Job As Per Direction. 36 Double Eathing With 50Mm. Dia. Tata – Medium G.I. Pipe 3.64Mm. Thick × 3.04Mtr. Long And 2×4Swg Gi ( Hot Dip ) Wire ( 4Mtr. Long ) , 13Mm. Dia. × 80Mm. Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fitting 15Mm. Dia. G.I. Pipe Protection ( 1Mtrs. Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Overage Depth Of 3.65Mtrs. Below The Ground Level & Restoring Surface Duly Rammed. 37 Supply, Delivery And Storage At Siteof Automatically Controlled Diaphragm Type Chlorinator Dosing Pump With Flow Rate 100 Lph And Maximum Pressure Of 10Kg / Cm2 With All Accessories For Pump & Motor, Foundation Bolt, Suction And Discharge Flange And With Storage Tank Of Dosing Solution Of 100Ltr. Capacity And The Prime Mover To Be Coupled With Pump Of 0.5 H.P. 3 Phase, 1450 Rpm Squirrel Cage Tefc Induciton Motor, Motor Will Be Ie2 / Ie3 ( Make Of Machine : Swelore / Any Other Approved, Make Of Motor : Abb / Cgl / Kec / Any Other Approved Make ) 38 Installtion And Commissioning Of Above Supplied Chlorinator With All Accessories, Pvc Tank And Drawing Of Power Line As Per Ie Rules By Supplying Of Necessary Wire And Continuous Earthing. This Include The Cost Of All Necessary Cc Foundation [ At Least 200Mm Height ] With Concrete Mixture [ Sand, Cement, Stone Chips ] And Neat Cement Finish By Supplyig Of All Required Materials And Testing The Entire Set As Per Direction Of Eic [ Power Will Be Feed From Plc Panel Of Pumping Machinery ] 39 Distribution Wiring In 1.1Kv. Grade, ( 2X1.5Mm2 ) Single Core Stranded Fr Pvc Insulated & Unsheathed Copper Wire ( Approved Make ) In Suitable Size Pvc Casing Capping ( Precision Make ) With ( 1.5 Sqmm ) Single Core Stranded Fr Pvc Insulted & Unsheathed Copper Wire For Ecc, Including Necessary Pvc Clips, Fittings Etc. To Light / Fan Point With Piano Key Type Switch ( Anchor Make ) Fixed On Sheet Steel Fabricated Switch Board With Perspex / Bakelite Top Cover On Wall Including Necessary Connections And Making Earthing Attachment And Mending Good Damages To Building Works. [ Pvc Casing-Capping And Switch Board Both On Surface ] 40 A ) Average Run 4. 5 Mtr. - 41 Supply And Fitting Fixing Of 40A Dp Isolator ( Make : Havells / Standard ) 42 Supply And Delivery Of Cfl , 23 Watt, ( Make-Phillips / Other Approvedmake ) 43 Supply And Fitting Fixing Of Ceiling Fan ( Make: Usha / Crompton / Havels / Other Approvedmake ) 1200Mm. Sweep Complete With Blade, Rubber Bush Etc. Including Supply And Fixing 2×1 / 1.4 Pvc Copper Wire For Down Rod With Making Necessary Connection Complete. 44 Supply & Fitting Fixing Of 10 Watt, Led Fixture Set ----------For Phillips Model No. Brp 020 / 10 Led ( Make: Phillps / Other Approved Make ) With 40Mm. Dia. × 2.5Mtr. Long G.I Pipe Bracket Fixing On Wall Of The Pump House With 3Nos. M. S. Clamp Properly Grouting Including Making Power Connection With Supply And Drawing 2.5Sq.Mm. Copper Flexible Cable Wire With Controlling Sub Switch And Continuous Earthing From Nearest Junction Board All Complete As Per Direction Of E.I.C. 45 Supply Of 4Ft. 36W Double Fluorescent Light Fittings Complete With All Accessories Including 2Nos. 36W Tube Light Incl. Fixing Lightfitting On Wall By Means L Clamp, Nipple, Suitable Size Fastner And Connection By 1.5 Sqmm Pvc / Cu Wire As To G S. Model :- Tmc0552xtld36webt ( Make- Philips / Havells / Bajaj / Other Approvedmake ) 46 Supply And Fixing Bulkhead Lightfittingson Wall Incl. Connection. As To Gs .Make -Bajaj / Havells / Other Approvedmake ) 47 Supply And Delivery At Site A.C. 3 Ph. Oil Cooled Type Voltage Stabilizer Suitable For Unbalanced Input Voltage With Following Specification. ( Make: Ae / Sen & Pandit / Opto Elect. / Ecs / Fiji / Any Approved Make ) A ) Input:250-500 V, 3Ph., 50Hz, 4 Wireb ) Output, 415V + 1% 3Ph., 50Hz.C ) Capacity: 20 Kva.D ) Auto Manual Switch. Is- 9815 ( I ) E ) Raise / Lower Push Button.F ) Single Lamps To Indicate And Limits Of Input.G ) Voltmeter For Input And Output Voltage. ( Manufacturing Test Certificate Should Be Produced At The Time Of Delivery ) H ) With U / V.O. / V.O. / L Protection With Contractor At Output Side, Input Mcb & Ammeter Etc. ( Tc / Gc Needed ) . 48 Supply The Following Electrical Accessories At Site. 49 A ) 100Amp. 4 Pole 415V Tpn Off Load Change Over Switch ( Make : Standard / Havells’ / Abb / Siemens ) 50 B ) 100 A Tpn Main Switch With Re-Wirable Fuse Link Within Sheet Steel Enclosure ( Make ( Havels / Standard / Approved Make ) 51 C ) 25 Mm², 1.1 Kv Grade. 3.5 Core Al Armoured Xlpe Conform To Is 1554 / 7098 ( Part-I ) 1998 ( Make : Gloster / Havells / Mescab / Currency / Polycab / Crystal / Approved Make ) 52 Installation Of The Above Voltage Stabilizer Of ( Item No.-1 To 2 ) On The Foundation Incl. Interconnection Complete & Testing The Voltage Stabilizer Along With Other Electrical Equipments To Ensure Performance Of The Equipments In Running Satisfactorily As Per Ie Rules & As Per Direction Of E.I.C. Incl. Testing Commissioning Complete. 53 Add. Gst@12% 54 Add. Cess@1%
Basic Detail
Tender No WBPHED/EE/CMD/eNIT-22/2021-22
Bidding Type Tender
Location
City gopalpur
State West Bengal
Key Dates
Publish Date 04 Apr 2022
Submission Date 26 Apr 2022
Open Date 29 Apr 2022
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 20500
Exemption Not Available
Document List
123c7ba3-88cc-4823-87c1-5c9882c40ca9.html
2911-N-pdf.pdf
BOQ_728794.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 04, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 26, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 29, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

123c7ba3-88cc-4823-87c1-5c9882c40ca9.html

pdf

2911-N-pdf.pdf

xls

BOQ_728794.xls

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders