Construction Of Laboratory Shed At Bull Mother Farm, Bhadbada, Bhopal
Tender Value
9.60 Lakhs
Estimated cost
Bid Submission
08 Apr 2022
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Laboratory Shed At Bull Mother Farm, Bhadbada, Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Laboratory Shed at Bull Mother Farm, Bhadbada, Bhopal |
| 2 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deepand disposal of rubbish, lead upto50 m and liftupto1.5 m.All kinds of soil, (SORI.No. 2.1) |
| 3 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual over area (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(No extra lift is payable if work is done by mechanical means)All kinds of soil, (SOR I.No. 2.6) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : With 40mm nominal size graded stone aggregate. Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) (SOR I.No. 4.1.2.2) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :M 20 –Grade Concrete, (SOR I.No. 5.1.1) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. forconcrete up to plinth level. (SOR I.No. 5.9.1) |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete.Thermo-Mechanically Treated bars.(TMT) (SOR I.No. 5.16.6) |
| 8 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes (SOR I.No. 10.14.1) |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(SOR I.No. 12.15) |
| 10 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Gutter .(600 mm over all girth). (SOR I.No. 12.16.6) |
| 11 | Painting steel work with deluxe multi surface paint etc two or more coat |
| 12 | Brick work withwellburntchimney bricks inbulls patenttrench kiln, crushing strength not less than 25kg /cm2 and water bsorption not more than 20% in superstructure above plith level and up to floor two level i/c curingetc complete. Cement Mortar 1:4 (1 cement : 4sand). (SOR I.No. 6.4.2/P-85) |
| 13 | 12mm plaster 1:4, (SOR 13.1.2) |
| 14 | 20mm plaster 1:4(SOR 13.3.2) |
| 15 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, old work (one or more coats applied @ 0.83 ltr/ 10 sqm.). (SOR I.No. 13.53) |
| 16 | Kota stone flooring over 20 mm(avg) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab etc, (SOR I.No. 11.35) |
| 17 | Marble & granite work for kitchen platform,vanity counter window sills facias cuddpah stone |
| 18 | Electrical work |
AI Tender Summary
Tender Timeline
Apr 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender