Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-04-2022 | Revised Corrigendum | Other | 27-04-2022 |
| 2 | 13-04-2022 | Corrigendum | Other | 27-04-2022 |
| Sl. No. | Item Description |
| 1 | Rate for Cattle Feed Plant, Jodhpur (Mechanical Spare Part) |
| 2 | Super Senior (Spectoms) Make Pellet Mill Spare |
| 3 | Pellet Die (10mm Hole) Spectoms (635 mm OD X 520 mm ID (App.) |
| 4 | Die Holder Ring (Rear) Dimestions can be collected from Plant |
| 5 | Die Holder Ring (Front)Dimestions can be collected from Plant |
| 6 | Die Cover Ring |
| 7 | Die Holder (Steel) Forged (640 Dia X 450 mm Lg) |
| 8 | Die Holder Assembly Complete with \"T\" Shaft & Bearings |
| 9 | nuematic |
| 10 | Bearing Cover (Rear) |
| 11 | Front Scraper |
| 12 | Press roll stay assembly |
| 13 | Rear Scraper |
| 14 | Bearing Setting Ring |
| 15 | Press Roll Holder Shaft |
| 16 | Main Pulley Assembly (Fly Wheel)(1200 mm Dia X 250 mm Wide X 9 grove SPC) |
| 17 | Counter Shaft Assembly with Pulley Without Belt (234 mm Dia X 300 mm Wide X 9 grove SPC) |
| 18 | Front Bearing Spacer for \"T\" Shaft |
| 19 | Press Roll Cell (250 mm OD X 180 mm ID X 150 mm Lg) |
| 20 | T Shaft (120 mm Dia X 1185 mm Lg) |
| 21 | Wearing Ring (720 mm OD X 615 mm ID X 70 mm Lg) |
| 22 | Lock Nut (KM 20) |
| 23 | Circlip For Press Roll Assembly (B160) |
| 24 | Main Bolt (36 Dia X 290 Lg) |
| 25 | Esentric Shaft (125 Dia X 309 Lg) |
| 26 | Counter Pulley (Super Senior) Suitable to Spectom) |
| 27 | Super Senior (Spectoms) Make Pellet Mill Spare |
| 28 | Pellet Die (10mm Hole) Spectoms (635 mm OD X 520 mm ID (App.) |
| 29 | Die Holder Ring (Rear) Dimestions can be collected from Plant |
| 30 | Die Holder Ring (Front)Dimestions can be collected from Plant |
| 31 | Die Cover Ring |
| 32 | Die Holder (Steel) Forged (640 Dia X 450 mm Lg) |
| 33 | Die Holder Assembly Complete with \"T\" Shaft & Bearings |
| 34 | Bearing Cover (Front) |
| 35 | Bearing Cover (Rear) |
| 36 | Front Scraper |
| 37 | Press roll stay assembly |
| 38 | Rear Scraper |
| 39 | Bearing Setting Ring |
| 40 | Press Roll Holder Shaft |
| 41 | Main Pulley Assembly (Fly Wheel)(1200 mm Dia X 250 mm Wide X 9 grove SPC) |
| 42 | Counter Shaft Assembly with Pulley Without Belt (234 mm Dia X 300 mm Wide X 9 grove SPC) |
| 43 | Front Bearing Spacer for \"T\" Shaft |
| 44 | Press Roll Cell (250 mm OD X 180 mm ID X 150 mm Lg) |
| 45 | T Shaft (120 mm Dia X 1185 mm Lg) |
| 46 | Wearing Ring (720 mm OD X 615 mm ID X 70 mm Lg) |
| 47 | Lock Nut (KM 20) |
| 48 | Circlip For Press Roll Assembly (B160) |
| 49 | Main Bolt (36 Dia X 290 Lg) |
| 50 | Esentric Shaft (125 Dia X 309 Lg) |
| 51 | Counter Pulley (Super Senior) Suitable to Power Mech) |
| 52 | Full Circular Hammer Mill (PARAGON MAKE) |
| 53 | Beater (Flat Type) all equal weight (50 mm X 6 mm X 140mm Lg) |
| 54 | Beater holder Shaft for above |
| 55 | Feeder Rotor Assembley Complete |
| 56 | Full Circular Hammer Mill (H S 100) |
| 57 | Main Rotor With Shaft (460mm Dia X 818mm Lg) |
| 58 | Main Rotor Shaft (95 mm Dia X1258 mm Lg EN 8) |
| 59 | M - Type Beaters (142 mm X 60 mm X 10 mm Thick EN 8) |
| 60 | Beater Rod (19 mm Dia X 710 mm Lg) |
| 61 | Perforted Sieve Sheet (4 Ft.X8 Ft.) (4 Dia holes X 3 mm thick) |
| 62 | PerfortedSieve Sheet (4 Ft.X8 Ft.) (5Dia holes X 3 mm thick) |
| 63 | PerfortedSieve Sheet (4 Ft. X 8 Ft.) (6 Dia holes X 3 mm thick) |
| 64 | Feeder Rotor Assembley Complete |
| 65 | Press Roll Assembly Super Senior (Spectoms Make) |
| 66 | Press Roll Assembly Complete with Shell, Bearing etc. |
| 67 | Press Roll Shell |
| 68 | Eccentric Shaft |
| 69 | Circlip |
| 70 | Distance Ring |
| 71 | Bearing Cover |
| 72 | Spacer (Sealing Ring) |
| 73 | Bearing Retainer/Nut for Eccentric Shaft M 20 |
| 74 | Lock Washer (MB-20) |
| 75 | Setting Ring |
| 76 | Clamping Device Tension Ring(90x101x17) |
| 77 | Center Bolt/Roller Stud (Allen,Bolt,Head Type Design) |
| 78 | Pellet Cutting Knife |
| 79 | Front Scraper\"s Holding Stud |
| 80 | Clamping Stay & Side |
| 81 | Press Roll Assembly Senior Pellet Mill (POWER MECH MAKE) |
| 82 | Press Roll Assembly Complete with Shell, Bearing etc. |
| 83 | Press Roll Shell |
| 84 | Eccentric Shaft |
| 85 | Circlip |
| 86 | Distance Ring |
| 87 | Bearing Cover |
| 88 | Spacer (Sealing Ring) |
| 89 | Bearing Retainer/Nut for Eccentric Shaft M 20 |
| 90 | Lock Washer (MB-20) |
| 91 | Setting Ring |
| 92 | Clamping Device Tension Ring(90x101x17) |
| 93 | Center Bolt/Roller Stud (Allen,Bolt,Head Type Design) |
| 94 | Pellet Cutting Knife |
| 95 | Front Scraper\"s Holding Stud |
| 96 | Clamping Stay & Side |
| 97 | Elevator Accessories |
| 98 | Seam less Buckets (10\" X 6 \" X 5\" X 2 mm 3 Holes 3/8\") |
| 99 | Seam less Buckets (6\" 1/4(160mm)X4\"1/2(115mm) X3\"1/2(90mm)X 2 mm3 Holes 3/8\") |
| 100 | Elevator Belt 200 mm (Grade M 24 3 ply nylon X 3mm top X 3 Bottom Rubber) |
| 101 | Cage Pully With Shaft (500 Dia X 280 Wide ) |
| 102 | Cage Pully With Shaft (550 Dia X 350 Wide ) |
| 103 | Top Rubbersed pully with Shaft (500 Dia X 280 Wide ) |
| 104 | Top Rubbersed pully with Shaft (550 Dia X 350 Wide ) |
| 105 | 1\" PITCH 18 T BORE 40 MM DEY 12X8 MH |
| 106 | DUPLEX SPOCKET 35 T-1\" PITCH |
| 107 | SIMPLEX SPOCKET 1\" PITCH(36 TEETH) |
| 108 | Front Scraper\"s Holding Stud |
| 109 | Raddler Chain |
| 110 | RADDLER CHAIN(100 mm pitch X 235 mm Wide (Insite and Outsite link 40 x 5 mm thick along with bushes and roller duly hardened.) suitable for 20 MT/hr chain conveyor with bulk density 600 Kg/cm3 material) |
| 111 | Wooden Slat |
| 112 | Woodan Slat For Slat Conveyor (Rate per piece) |
| 113 | Shaft |
| 114 | INTAKE CHAIN CONVEYOR FRONT SHAFT(65 DIA X 760 MM LONG) |
| 115 | INTAKE CHAIN CONVEYOR REAR SHAFT (65 DIA X 580 MM LONG) |
| 116 | ELEVATOR 8\" TOP PULLY SHAFT (52 DIA X 810 MM LONG) |
| 117 | ELEVATOR 8\" BOTTOM PULLY SHAFT (52 DIA X 525 MM LONG) |
| 118 | ELEVATOR 10\" TOP PULLY SHAFT (52 DIA X 865 MM LONG) |
| 119 | ELEVATOR 10\" BOTTOM PULLY SHAFT (52 DIA X 600 MM LONG) |
| 120 | DISTRIBUTION CONVEYOR SHAFT(40DIA X 300MM LONG) |
| 121 | SLAT CONVEYOR SHAFT (50 DIA X 700 MM LONG) |
| 122 | Knife |
| 123 | MOLASSES KNIFE-SS 20 MM FULL THREAD WITH DOUBLE NUT AND WASHER |
| 124 | MOLASSES KNIFE-SS 12 MM HALF THREAD WITH DOUBLE NUT AND WASHER |
| 125 | Cutting Wheel |
| 126 | CUTTING WHEEL 4 INCH |
| 127 | CUTTING WHEEL 14 INCH |
| 128 | Tenson Rod |
| 129 | TENSON ROD (SUPER SENIOR MAKE) |
| 130 | TENSON ROD (SENIOR MAKE) |
| 131 | Chain Sprocket |
| 132 | CHAIN SPOCKET PITCH 1\" (10 TEETH SIMPLEX) |
| 133 | CHAIN SPOCKET PITCH 1\" (15 TEETH SIMPLEX) |
| 134 | CHAIN SPOCKET PITCH 1\" (17 TEETH SIMPLEX) |
| 135 | CHAIN SPOCKET PITCH 1\" (18 TEETH SIMPLEX) |
| 136 | CHAIN SPOCKET PITCH 1\" (20 TEETH SIMPLEX) |
| 137 | CHAIN SPOCKET PITCH 1\" (25 TEETH SIMPLEX) |
| 138 | CHAIN SPOCKET PITCH 1\" (27 TEETH SIMPLEX) |
| 139 | CHAIN SPOCKET PITCH 1\" (36 TEETH SIMPLEX) |
| 140 | CHAIN SPOCKET PITCH 1\" (19 TEETH DUPLEX) |
| 141 | CHAIN SPOCKET PITCH 1\" (20 TEETH DUPLEX) |
| 142 | CHAIN SPOCKET PITCH 1\" (23 TEETH DUPLEX) |
| 143 | CHAIN SPOCKET PITCH 1\" (24 TEETH DUPLEX) |
| 144 | CHAIN SPOCKET PITCH 1\" (35 TEETH DUPLEX) |
| 145 | CHAIN SPOCKET 125 P(09 TEETH X 20 MM THICK) |
| 146 | CHAIN SPOCKET 152 PCD (06 TEETH X 12 MM THICK) |
| 147 | SPOCKET FOR CHAIN CONVEYOR (INNER)(9 TEETH) |
| 148 | Chain Lock |
| 149 | FULL LOCK (1\" SIMPLEX) |
| 150 | FULL LOCK (1\" DUPLEX) |
| 151 | Nut & Bolts |
| 152 | Hightension bolts (Half thread)(16 X 140 mm) |
| 153 | Hightension bolts (Half thread)(16 X 40 mm) |
| 154 | Hightension bolts (Half thread)(20 X 50 mm) |
| 155 | Hightension bolts (Half thread)(20 X 140 mm) |
| 156 | Patta Bolt(5/16\" X 1.25\") |
| 157 | Patta Bolt(5/16\" X 2\") |
| 158 | Bearing and General Item |
| 159 | V\" Belts-Fenner |
| 160 | V\" Belts-Polycon |
| 161 | V\" Belts-SKF |
| 162 | V\" Belts-PIX |
| 163 | V\" Belts-Dunlop |
| 164 | V\" Belts-Apollo |
| 165 | V\" Belts-Rolax |
| 166 | Tyre Coupling Complete-Fenner |
| 167 | Tyre Coupling Complete-HIC |
| 168 | Tyre Coupling Complete-Octaforce |
| 169 | Tyre Coupling Complete-Unique |
| 170 | Tyre For Tyre Coupling-Fenner |
| 171 | Tyre For Tyre Coupling-HIC |
| 172 | Tyre For Tyre Coupling-Octaforce |
| 173 | Tyre For Tyre Coupling-Unique |
| 174 | Bush type/Tyre Couplings Complete Set-Unique |
| 175 | Bush type/Tyre Couplings Complete Set-Fenner |
| 176 | Rubber lovejoy Coupling-Spider |
| 177 | Welding Electrodes-Anand |
| 178 | Welding Electrodes-Moon-Arc |
| 179 | Welding Electrodes-NOVA |
| 180 | Welding Electrodes-Stone Bridge |
| 181 | Welding Electrodes-Hobart |
| 182 | S.S.Welding Electrodes-Anand |
| 183 | Steam Valves-Sant |
| 184 | Steam Valves-Leader |
| 185 | Bearing-KOYO |
| 186 | Bearing-NTN JAPAN |
| 187 | Bearing-FAG |
| 188 | Bearing-SKF |
| 189 | Bearing-NBC |
| 190 | Bearing-ZKL |
| 191 | Bearing-JMC |
| 192 | Bearing-URB |
| 193 | Bearing Sleeve-HKG |
| 194 | Bearing Sleeve-NHB |
| 195 | Bearing Sleeve-HFK |
| 196 | Bearing Sleeve-JMC |
| 197 | Bearing Sleeve-GMR |
| 198 | Pedestal for Bearings-JNP |
| 199 | Pedestal for Bearings-JNZ |
| 200 | Pedestal for Bearings-JMC |
| 201 | Pedestal for Bearings-GMR |
| 202 | Bearing Housing-NTN JAPAN |
| 203 | Soleniod Valve with Coil-Airmax |
| 204 | Soleniod Valve with Coil-Festo |
| 205 | Soleniod Valve with Coil-Janatics |
| 206 | Soleniod Valve with Coil-Datta |
| 207 | Soleniod Valve with Coil-Akari |
| 208 | Soleniod Valve Filter-Airmax |
| 209 | Soleniod Valve Filter-Akari |
| 210 | Seal Kit for Solenniod Valve-Airmax |
| 211 | Pneumatic Air Cylinder-Festo |
| 212 | Pneumatic Air Cylinder-Airmax |
| 213 | Pneumatic Air Cylinder-Datta |
| 214 | Pneumatic Connector-Festo |
| 215 | Pneumatic Connector-Akari |
| 216 | Pneumatic Connector-Airmax |
| 217 | Pneumatic Jointer-Festo |
| 218 | Pneumatic Jointer-Akari |
| 219 | Pneumatic Jointer-Airmax |
| 220 | Pneumatic Air Valve Seting T-Festo |
| 221 | Pneumatic Air Valve Seting T-Akari |
| 222 | Pneumatic Air Valve Seting T-Airmax |
| 223 | Pneumatic Elbow-Festo |
| 224 | Pneumatic Elbow-Akari |
| 225 | Pneumatic Elbow-Airmax |
| 226 | Sprocket Chain ?2\" Simplex-Diamond |
| 227 | Sprocket Chain ¾\" Simplex-Diamond |
| 228 | Sprocket Chain 1\" Simplex-Diamond |
| 229 | Sprocket Chain ?2\" Simplex-Rollon |
| 230 | Sprocket Chain ¾\" Simplex-Rollon |
| 231 | Sprocket Chain 1\" Simplex-Rollon |
| 232 | Sprocket Chain ?2\" Duplex-Diamond |
| 233 | Sprocket Chain ¾\" Duplex-Diamond |
| 234 | Sprocket Chain 1\" Duplex-Diamond |
| 235 | Sprocket Chain ?2\" Duplex-Rollon |
| 236 | Sprocket Chain ¾\" Duplex-Rollon |
| 237 | Sprocket Chain 1\" Duplex-Rollon |
| 238 | Oil Seal-Voston Plus |
| 239 | Electrical Item |
| 240 | Contactors All Types-ABB |
| 241 | Contactors All Types-Havells |
| 242 | Contactors All Types-L&T |
| 243 | Contactors All Types-SIEMENS |
| 244 | Contactors All Types- BCH |
| 245 | Spare Kits For Contactors-ABB |
| 246 | Spare Kits For Contactors-Havells |
| 247 | Spare Kits For Contactors-L&T |
| 248 | Spare Kits For Contactors-SIEMENS |
| 249 | Spare Kits For Contactors-BCH |
| 250 | Coil For Contactors-L&T |
| 251 | Coil For Contactors-SIEMENS |
| 252 | Coil For Contactors-BCH |
| 253 | MCCB-ABB |
| 254 | MCCB-Havells |
| 255 | MCCB-L&T |
| 256 | MCCB-SIEMENS |
| 257 | MCCB-BCH |
| 258 | MCB-ABB |
| 259 | MCB-Havells |
| 260 | MCB-L&T |
| 261 | MCB-SIEMENS |
| 262 | MCB-BCH |
| 263 | MPCB-ABB |
| 264 | MPCB-L&T |
| 265 | MPCB- SIEMENS |
| 266 | MPCB-BCH |
| 267 | Fuses-ABB |
| 268 | Fuses-Havells |
| 269 | Fuses-Siemens |
| 270 | Fuses- L&T |
| 271 | Fuse base-ABB |
| 272 | Fuse base-Havells |
| 273 | Fuse base-Siemens |
| 274 | Fuse base- L&T |
| 275 | Overload Relays-ABB |
| 276 | Overload Relays-L&T |
| 277 | Overload Relays-SIEMENS |
| 278 | Overload Relays- BCH |
| 279 | PVC Wire-HAVELLS |
| 280 | PVC Wire-POLYCAB |
| 281 | Electric Motor 3 Phase-SIEMENS |
| 282 | Electric Motor 3 Phase-BHARAT BIJLI |
| 283 | Electric Motor 3 Phase-ABB |
| 284 | Gear Motor 3 Phase-PBL |
| 285 | Gear Motor 3 Phase-SIEMENS |
| 286 | Gear Motor 3 Phase-ELECON |
| 287 | Gear Motor 3 Phase-NEWBHARAT |
| 288 | Gear Box with Motor 3 Phase-PBL |
| 289 | Gear Box with Motor 3 Phase-SIEMENS |
| 290 | Gear Box with Motor 3 Phase-ELECON |
| 291 | Gear Box with Motor 3 Phase-NEW BHARAT |
| 292 | Gear Box with Motor-PBL |
| 293 | Multistrand Wires-ABB |
| 294 | Multistrand Wires-Siemens |
| 295 | Multistrand Wires-Havells |
| 296 | Multistrand Wires-L&T |
| 297 | Multistrand Wires-KINGSWAY |
| 298 | Multistrand Wires-KEI |
| 299 | Multistrand Wires-VIMAL |
| 300 | Aluminium Armoured Cables-KINGSWAY |
| 301 | Aluminium Armoured Cables-ABB |
| 302 | Aluminium Armoured Cables-Siemens |
| 303 | Aluminium Armoured Cables-Havells |
| 304 | Aluminium Armoured Cables-L&T |
| 305 | Aluminium Armoured Cables-KEI |
| 306 | Copper Armoured Cables-Havells |
| 307 | Copper Armoured Cables-L&T |
| 308 | Copper Armoured Cables-KEI |
| 309 | Copper Armoured Cables-KINGSWAY |
| 310 | Soft Starters-ABB |
| 311 | Soft Starters-Havells |
| 312 | Soft Starters-L&T |
| 313 | Soft Starters-Siemens |
| 314 | Soft Starters-Danfoss |
| 315 | Push Button (On, Off) with Elecment (Red & Green Colour)-Teknic |
| 316 | R,Y,B, Indicating Lamp (LED type) (240V AC, 22.5 sq.mm)-L & T |
| 317 | Add-On Block (4 No, 2 No-2 NC, 1 No)-L & T |
| 318 | Selec timer (230V AV, 50-60HZ 10VA Max)-L & T |
| 319 | Limit Switch (24V DC)-L & T |
| 320 | Limit Switch (24V DC)-Siemens |
| 321 | Reed Switch(24V DC)-L & T |
| 322 | Reed Switch(24V DC)-Siemens |
| 323 | Proximity Sensor (HL,LL) (12-24V DC)-Dolfin |
| 324 | CAPASITOR 2 KVR TO 25 KVR-ABB |
| 325 | CAPASITOR 2 KVR TO 25 KVR-SIEMENS |
| 326 | CAPASITOR 2 KVR TO 25 KVR-SUNIDER |
| 327 | Air Cricuit Breaker 1000AMP-L & T |
| 328 | Air Cricuit Breaker 1000AMP-Siemens |
| 329 | Air Cricuit Breaker 1600AMP-L & T |
| 330 | Air Cricuit Breaker 1600AMP-Siemens |
| 331 | Pneumatic Connector-Festo |
| 332 | Pneumatic Connector-Akari |
| 333 | Pneumatic Connector-Airmax |
| 334 | Pneumatic Jointer-Festo |
| 335 | Pneumatic Jointer-Akari |
| 336 | Pneumatic Jointer-Airmax |
| 337 | Pneumatic Elbow-Festo |
| 338 | Pneumatic Elbow-Akari |
| 339 | Pneumatic Elbow-Airmax |
| 340 | Rate for Cattle Feed Plant, Ajmer (Mechanical Spare Part) |
| 341 | Pellet Mill Spare |
| 342 | Pellet die (Hole-10mm,Thikness-58,Round-520,Width-190, Taper-23) |
| 343 | Pellet die (Hole-8mm, Thikness-58,Round-520,Width-190,Taper-20) |
| 344 | Press Roll Shell (250 Outer x 180 Inner x 145 Face) |
| 345 | Press Roll Shell Complete (250 Outer x 180 Inner x 145 Face) |
| 346 | Shear Pin-520M x 178 MM (250 Outer x 180 Iner x 145 Face) |
| 347 | Die Fixing Bolt (M 16x140L) (L-140mm x w 16 mm) |
| 348 | Die Fixing Bolt (M 16x140L) (L-140mm x w 20 mm) |
| 349 | Front Dia Cover Bolt (M 16x40L) (L-40mm x W 16 mm) |
| 350 | Front Dia Cover Bolt (M 16x40L) (L-50mm x W 19 mm) |
| 351 | Dia Holder Cap Annokey Bolt (M24x50L) (L-50mm x W 24mm) |
| 352 | Front Wearing Ring |
| 353 | Die Cover Ring |
| 354 | Rear Wearing Ring |
| 355 | Front Scrapper Blade |
| 356 | Center Bolt (L-300mm x W 24 mm) |
| 357 | Distance Ring |
| 358 | S.S. Screw Conveyor (2850mm Long) |
| 359 | Pedestal Knife Big (L-130mm,W-75mm,Bolt-125mm,H-20 mm) |
| 360 | Pedestal Knife Small (L-110mm,W-50mm,Bolt-80mm,H-12 mm) |
| 361 | Hammer Mill Beater (L-142mm, W-60mm, Hole Gape-45mm, Hole Size-20mm) |
| 362 | Hammer Mill Beater Rod (L-695mm, H-19mm) |
| 363 | Hammer Mill Beater Rod (L-558mm, H-20mm, LLK Hole-8mm) |
| 364 | Bucket 8\" (5\"1/4\"x4 1/4\"x14G) |
| 365 | Bucket 10\" (6\"x5\"x14G) |
| 366 | Feeder Coditioner Screw Pendel Type |
| 367 | Reddlar Chain For Chain Conveyor |
| 368 | Slat Conveyor Chain (Link Holl to Hole 125mm/Fanta 500mm x 80 mm Total M 105 Fit Sprockit 8 Teeth) |
| 369 | Slat Conveyor Chain 6mm X 2mm |
| 370 | Die Holder |
| 371 | Die Ring |
| 372 | Sprocket-13 Teeth Double |
| 373 | Sprocket-21 Teeth Double |
| 374 | Sprocket-35 Teeth Duplex |
| 375 | Sprocket-24 Teeth Simplex |
| 376 | Pinion (4748) |
| 377 | 1ST Pinion (4237) |
| 378 | 1ST Pinion (3388) |
| 379 | 2ND Pinion (365) |
| 380 | 1ST Wheel (215) |
| 381 | 2ND Wheel (3388) |
| 382 | 2ND Wheel (619) |
| 383 | 2ND Wheel (366) |
| 384 | Batch Mixer Shaft |
| 385 | Die Holder Cap. Asserioes |
| 386 | Pellet Cooler Air Lock (H-450mm, W-250mm Inlet/Outlet 155mm) |
| 387 | Elevator Belt (10\"X5 Ply, 3 mm Top Rubber,1.5 mm bottom Rubber) |
| 388 | Elevator Belt (12\"X4 Ply, 3 mm Top Rubber,1.5 mm bottom Rubber) |
| 389 | Elevator Coloum |
| 390 | Elevator Drum Soft 50mm |
| 391 | Hammer Mill Sieve (L-830mm, W-615mm/Hole 5mm) |
| 392 | Hammer Mill Sieve (L-830mm x W-705mm x 5 mm Hole) |
| 393 | Pedestal for Connector Shaft |
| 394 | Cheknet for Main shaft |
| 395 | Helicol Gear |
| 396 | Complig Stand |
| 397 | ASS Sheet Glass 150m |
| 398 | ASS Sheet Glass 200m |
| 399 | CI Plug Stand (Bearing Boxes) |
| 400 | Diya Pipe 200m |
| 401 | Pellet mill Dia Cover |
| 402 | Bearing and General Item |
| 403 | V\" Belts-Fenner |
| 404 | V\" Belts-Polycon |
| 405 | V\" Belts-SKF |
| 406 | V\" Belts-PIX |
| 407 | V\" Belts-Dunlop |
| 408 | V\" Belts-Apollo |
| 409 | V\" Belts-Rolax |
| 410 | Tyre Coupling Complete-Fenner |
| 411 | Tyre Coupling Complete-HIC |
| 412 | Tyre Coupling Complete-Octaforce |
| 413 | Tyre Coupling Complete-Unique |
| 414 | Tyre For Tyre Coupling-Fenner |
| 415 | Tyre For Tyre Coupling-HIC |
| 416 | Tyre For Tyre Coupling-Octaforce |
| 417 | Tyre For Tyre Coupling-Unique |
| 418 | Bush type/Tyre Couplings Complete Set-Unique |
| 419 | Bush type/Tyre Couplings Complete Set-Fenner |
| 420 | Rubber lovejoy Coupling-Spider |
| 421 | Welding Electrodes-Anand |
| 422 | Welding Electrodes-Moon-Arc |
| 423 | Welding Electrodes-NOVA |
| 424 | Welding Electrodes-Stone Bridge |
| 425 | Welding Electrodes-Hobart |
| 426 | S.S.Welding Electrodes-Anand |
| 427 | Steam Valves-Sant |
| 428 | Steam Valves-Leader |
| 429 | Bearing-KOYO |
| 430 | Bearing-NTN JAPAN |
| 431 | Bearing-FAG |
| 432 | Bearing-SKF |
| 433 | Bearing-NBC |
| 434 | Bearing-ZKL |
| 435 | Bearing-JMC |
| 436 | Bearing-URB |
| 437 | Bearing Sleeve-HKG |
| 438 | Bearing Sleeve-NHB |
| 439 | Bearing Sleeve-HFK |
| 440 | Bearing Sleeve-JMC |
| 441 | Bearing Sleeve-GMR |
| 442 | Pedestal for Bearings-JNP |
| 443 | Pedestal for Bearings-JNZ |
| 444 | Pedestal for Bearings-JMC |
| 445 | Pedestal for Bearings-GMR |
| 446 | Bearing Housing-NTN JAPAN |
| 447 | Soleniod Valve with Coil-Airmax |
| 448 | Soleniod Valve with Coil-Festo |
| 449 | Soleniod Valve with Coil-Janatics |
| 450 | Soleniod Valve with Coil-Datta |
| 451 | Soleniod Valve with Coil-Akari |
| 452 | Soleniod Valve Filter-Airmax |
| 453 | Soleniod Valve Filter-Akari |
| 454 | Seal Kit for Solenniod Valve-Airmax |
| 455 | Pneumatic Air Cylinder-Festo |
| 456 | Pneumatic Air Cylinder-Airmax |
| 457 | Pneumatic Air Cylinder-Datta |
| 458 | Pneumatic Connector-Festo |
| 459 | Pneumatic Connector-Akari |
| 460 | Pneumatic Connector-Airmax |
| 461 | Pneumatic Jointer-Festo |
| 462 | Pneumatic Jointer-Akari |
| 463 | Pneumatic Jointer-Airmax |
| 464 | Pneumatic Air Valve Seting T-Festo |
| 465 | Pneumatic Air Valve Seting T-Akari |
| 466 | Pneumatic Air Valve Seting T-Airmax |
| 467 | Pneumatic Elbow-Festo |
| 468 | Pneumatic Elbow-Akari |
| 469 | Pneumatic Elbow-Airmax |
| 470 | Sprocket Chain ?2\" Simplex-Diamond |
| 471 | Sprocket Chain ¾\" Simplex-Diamond |
| 472 | Sprocket Chain 1\" Simplex-Diamond |
| 473 | Sprocket Chain ?2\" Simplex-Rollon |
| 474 | Sprocket Chain ¾\" Simplex-Rollon |
| 475 | Sprocket Chain 1\" Simplex-Rollon |
| 476 | Sprocket Chain ?2\" Duplex-Diamond |
| 477 | Sprocket Chain ¾\" Duplex-Diamond |
| 478 | Sprocket Chain 1\" Duplex-Diamond |
| 479 | Sprocket Chain ?2\" Duplex-Rollon |
| 480 | Sprocket Chain ¾\" Duplex-Rollon |
| 481 | Sprocket Chain 1\" Duplex-Rollon |
| 482 | Oil Seal-Voston Plus |
| 483 | Cutting Wheel all size |
| 484 | Ring Spainer |
| 485 | Fix Spainer |
| 486 | Electrical Item |
| 487 | Contactors All Types-ABB |
| 488 | Contactors All Types-Havells |
| 489 | Contactors All Types-L&T |
| 490 | Contactors All Types-SIEMENS |
| 491 | Contactors All Types- BCH |
| 492 | Spare Kits For Contactors-ABB |
| 493 | Spare Kits For Contactors-Havells |
| 494 | Spare Kits For Contactors-L&T |
| 495 | Spare Kits For Contactors-SIEMENS |
| 496 | Spare Kits For Contactors-BCH |
| 497 | Coil For Contactors-L&T |
| 498 | Coil For Contactors-SIEMENS |
| 499 | Coil For Contactors-BCH |
| 500 | MCCB-ABB |
| 501 | MCCB-Havells |
| 502 | MCCB-L&T |
| 503 | MCCB-SIEMENS |
| 504 | MCCB-BCH |
| 505 | MCB-ABB |
| 506 | MCB-Havells |
| 507 | MCB-L&T |
| 508 | MCB-SIEMENS |
| 509 | MCB-BCH |
| 510 | MPCB-ABB |
| 511 | MPCB-L&T |
| 512 | MPCB- SIEMENS |
| 513 | MPCB-BCH |
| 514 | Fuses-ABB |
| 515 | Fuses-Havells |
| 516 | Fuses-Siemens |
| 517 | Fuses- L&T |
| 518 | Fuse base-ABB |
| 519 | Fuse base-Havells |
| 520 | Fuse base-Siemens |
| 521 | Fuse base- L&T |
| 522 | Overload Relays-ABB |
| 523 | Overload Relays-L&T |
| 524 | Overload Relays-SIEMENS |
| 525 | Overload Relays- BCH |
| 526 | PVC Wire-HAVELLS |
| 527 | PVC Wire-POLYCAB |
| 528 | Electric Motor 3 Phase-SIEMENS |
| 529 | Electric Motor 3 Phase-BHARAT BIJLI |
| 530 | Electric Motor 3 Phase-ABB |
| 531 | Gear Motor 3 Phase-PBL |
| 532 | Gear Motor 3 Phase-SIEMENS |
| 533 | Gear Motor 3 Phase-ELECON |
| 534 | Gear Motor 3 Phase-NEWBHARAT |
| 535 | Gear Box with Motor 3 Phase-PBL |
| 536 | Gear Box with Motor 3 Phase-SIEMENS |
| 537 | Gear Box with Motor 3 Phase-ELECON |
| 538 | Gear Box with Motor 3 Phase-NEW BHARAT |
| 539 | Gear Box with Motor-PBL |
| 540 | Multistrand Wires-ABB |
| 541 | Multistrand Wires-Siemens |
| 542 | Multistrand Wires-Havells |
| 543 | Multistrand Wires-L&T |
| 544 | Multistrand Wires-KINGSWAY |
| 545 | Multistrand Wires-KEI |
| 546 | Multistrand Wires-VIMAL |
| 547 | Aluminium Armoured Cables-KINGSWAY |
| 548 | Aluminium Armoured Cables-ABB |
| 549 | Aluminium Armoured Cables-Siemens |
| 550 | Aluminium Armoured Cables-Havells |
| 551 | Aluminium Armoured Cables-L&T |
| 552 | Aluminium Armoured Cables-KEI |
| 553 | Copper Armoured Cables-Havells |
| 554 | Copper Armoured Cables-L&T |
| 555 | Copper Armoured Cables-KEI |
| 556 | Copper Armoured Cables-KINGSWAY |
| 557 | Soft Starters-ABB |
| 558 | Soft Starters-Havells |
| 559 | Soft Starters-L&T |
| 560 | Soft Starters-Siemens |
| 561 | Soft Starters-Danfoss |
| 562 | Push Button (On, Off) with Elecment (Red & Green Colour)-Teknic |
| 563 | R,Y,B, Indicating Lamp (LED type) (240V AC, 22.5 sq.mm)-L & T |
| 564 | Add-On Block (4 No, 2 No-2 NC, 1 No)-L & T |
| 565 | Selec timer (230V AV, 50-60HZ 10VA Max)-L & T |
| 566 | Limit Switch (24V DC)-L & T |
| 567 | Limit Switch (24V DC)-Siemens |
| 568 | Reed Switch(24V DC)-L & T |
| 569 | Reed Switch(24V DC)-Siemens |
| 570 | Proximity Sensor (HL,LL) (12-24V DC)-Dolfin |
| 571 | CAPASITOR 2 KVR TO 25 KVR-ABB |
| 572 | CAPASITOR 2 KVR TO 25 KVR-SIEMENS |
| 573 | CAPASITOR 2 KVR TO 25 KVR-SUNIDER |
| 574 | Air Cricuit Breaker 1000AMP-L & T |
| 575 | Air Cricuit Breaker 1000AMP-Siemens |
| 576 | Air Cricuit Breaker 1600AMP-L & T |
| 577 | Air Cricuit Breaker 1600AMP-Siemens |
| 578 | MPR Meter L&T |
| 579 | Spark Key 200 AMP L&T |
| 580 | AVT Coat Blog L&T |
| 581 | Meter 150 AMP/5 AMP Cimence |
| 582 | Meter 200 AMP/5 AMP Cimence |
| 583 | Meter 350 AMP/5 AMP Cimence |
| 584 | Digital Walv Meter L&T |
| 585 | MCB Box Cimence |
| 586 | AMP Meter 150/5 L&T |
| 587 | Photo Register Cell Cimence |
| 588 | AMP Meter 250/5 96X96 |
| 589 | AMP Meter 30 AMP 72X72 |
| 590 | Capacitor Duty Conector 30 KVR L&T |
| 591 | Capacitor Duty Conector 50 KVR Hevals |
| 592 | PneumaticAir Pipe Hevals |
| 593 | Sensor 250 VAC Diamond |
| 594 | Rate for Cattle Feed Plant, Bikaner (Mechanical Spare Part) |
| 595 | Super Senior Pellet Mill |
| 596 | Bearing cover front (Forged Steel) |
| 597 | Bearing cover Rear (Forged Steel) |
| 598 | Bearing setting ring (Forged Steel) |
| 599 | Counter shaft Assembly with pulley without Belt (without bearing & pedestal) |
| 600 | Die cover Ring(Forged Steel) |
| 601 | Die Holder (Steel) (Forged Steel) |
| 602 | Die Holder Assembly(Forged Steel) |
| 603 | Die Holder Ring Rear (Suitable for above Alloy Steel) |
| 604 | Die Holder Ring Front(Forged Steel) |
| 605 | Feeder Conditioner S.S.Knife (S.S. 304, thread 1/2\" bolt per piece) |
| 606 | Feeder Conditioner Screw and paddle type Feeder conditioner body S.S. (Approx. 1430 mm long S.S.-304 Construction arragement of single drive feeding end.) |
| 607 | Front Bearing spacer for \"T\" shaft |
| 608 | Front Scraper (roll stay assembly) (Forged Steel with clamping stay) |
| 609 | Front Scraper blades for Pellet Mill |
| 610 | Pellet cooler Air lock (Height 450 MM/width 250 MM Inlet/outlet 155 MM) |
| 611 | Pellet cooler Eccentric Assembly |
| 612 | Pellet cooler Sensor |
| 613 | Pellet Die(Size:520 Dia inner X 635 outer X 23.0 wider Pellet:10/8 mm Hole Perforation Fixing-12-M 20x25 deep on 565 PCD Mounting : Tapper collar 12 deg on 620.6 Dia or straight plug dia 610 Dia Material : EN 19cor 42 crMo4 Duly hardened & temp. Polished, rc4=5) |
| 614 | Pulley Assembly (fly wheel) 11 groove(Forged Steel) |
| 615 | Rear Scraper(Forged Steel) |
| 616 | Roll Holder shaft (T shaft) assembly(Forged Steel) |
| 617 | Shearing Pin |
| 618 | Helical Gear with Hub (One set containing 2 numbers) |
| 619 | Helical Gear without Hub (One set containing 2 numbers) |
| 620 | Pellet Mill Sieve |
| 621 | Screw for variable speed feeder conditioner for Pellet Mill |
| 622 | Shear Pin Holding Body |
| 623 | Shear Pin Bush |
| 624 | Spring Set |
| 625 | Teflon Bush for Main \"T\" Shaft |
| 626 | PRESS ROLL ASSEMBLY SUPER SENIOR |
| 627 | Bearing cover |
| 628 | Bearing Retainer/Nut for eccentric shaft KM-20 |
| 629 | Center Bolt/Roller Stud (Allen, Bolt, head Type design) |
| 630 | Circlip (Dia 180 inside) |
| 631 | Clamping Device Tension ring (90x101x17) mm |
| 632 | Distance Ring |
| 633 | Eccentric Shaft |
| 634 | Lock nut with lock washer for press roll eccentric shaft |
| 635 | Lock Washer (MB-20) |
| 636 | Nut for Center Bolt (lighting Ring) |
| 637 | Press roll Assembly Complete with Shell, Bearing etc. (Suitable for above EN-24 Shell) |
| 638 | Press Roll Shell |
| 639 | Setting Ring |
| 640 | Spacer (Sealing Ring) |
| 641 | MOLASSES MIXER |
| 642 | Molasses Cutting Knife with nut (Suitable for above NI, Hard duly balanced) |
| 643 | Paddle plane and loop type (Suitable for above NI, Hard duly balanced) |
| 644 | Spray Pipe nozzle with nipple (1.5 inch C class pipe, 3/8 inch nipple) |
| 645 | FULL CIRCLE HAMMER MILL |
| 646 | Beater (Flat type) all equal weight (NI hard, Dynamically Balanced) |
| 647 | Beater Holder shaft (EN, Material) |
| 648 | Beater Holding Bush |
| 649 | Carrying rod for hammer mill 2 No. of each set |
| 650 | Door Closing clamp set |
| 651 | Hammer Mill Feeder |
| 652 | Permanent Magnet |
| 653 | Sieve Set (3 mm, Thich MS Sheet with 3 mm, 2 mm, 4mm, 5mm and 6mm perforations) |
| 654 | Sieve Set Clamping frame |
| 655 | SCREW CONVEYOR |
| 656 | Gravity pipe clamping (8 inch dia.) |
| 657 | Gravity pipe clamping for above pipe (8 inch Dia, 16 gauge.) |
| 658 | Gravity pipe M.S. (8 inch Dia, 16 gauge, 1 meter long) |
| 659 | Gravity pipe S.S. (8 inch Dia, 14 gauge, 1 meter long) |
| 660 | Pazama flap 3 way for distribution (Suitable for 8 inch pipe) |
| 661 | Screw of different sizes |
| 662 | Shaft suitable for joining the screw conveyor |
| 663 | CHAIN CONVEYOR |
| 664 | Raddler chain matching our existing chain conveyor, Chain should 10mm thick links along with bushes and roller duly hardened |
| 665 | Slat-Conveyor |
| 666 | Chain suitable for slat conveyor matching to our existing slat conveyors. Chain links should 6 mm thick along with bushes and roller dully hardened |
| 667 | Metal Slates |
| 668 | PRESS ROLL ASSEMBLY SUPER SENIOR |
| 669 | 1\" Simplex 11 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 670 | 1\" Simplex 15 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 671 | 1\" Simplex 16 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 672 | 1\" Simplex 17 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 673 | 1\" Simplex 22 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 674 | 1\" Simplex 32 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 675 | 1\" Simplex 42 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 676 | 1\" Duplex 45 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 677 | 1\" Duplex17 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 678 | 1\" Simplex 19 Teeth (Bore different size, Keyway 1/2\", Locking Hole 1/2\", 2 Nos. with thread, Bose 65mm) |
| 679 | PINIONS & WHEELS |
| 680 | 1ST PINION (4380) |
| 681 | 1ST PINION (4382-D) |
| 682 | 1ST PINION (4419) |
| 683 | 1ST PINION (4601) |
| 684 | 1ST PINION (4220) |
| 685 | 1ST PINION (4295) |
| 686 | 1ST PINION (4418) |
| 687 | 1ST PINION (7530) |
| 688 | 1ST WHEEL (724) |
| 689 | 1ST WHEEL (345) |
| 690 | 1ST WHEEL (1150) |
| 691 | 1ST WHEEL (797) |
| 692 | 1ST WHEEL (215) |
| 693 | 1ST WHEEL (2336) |
| 694 | 1ST WHEEL (704) |
| 695 | 2ND PINION (365) |
| 696 | 2ND PINION (833-C) |
| 697 | 2ND PINION (621) |
| 698 | 2ND PINION (3388) |
| 699 | 2ND PINION (4229) |
| 700 | 2ND PINION (181) |
| 701 | 2ND WHEEL (366) |
| 702 | 2ND WHEEL (182-D) |
| 703 | 2ND WHEEL (619) |
| 704 | 2ND WHEEL (3386) |
| 705 | 2ND WHEEL (4418) |
| 706 | 3RD PINION (179) |
| 707 | 3RD PINION (3319) |
| 708 | 3RD WHEEL (3377) |
| 709 | GEAR WHEEL (545) |
| 710 | GEAR WHEEL (729) |
| 711 | PINION (4343) |
| 712 | PINION (4347) |
| 713 | PINION WHEEL (544) |
| 714 | PINION WHEEL (431) |
| 715 | Wheel (180) |
| 716 | Wheel (253) |
| 717 | Wheel (3371) |
| 718 | Wheel (694) |
| 719 | 1st Pinion (4237) |
| 720 | 1st Pinion (4748) |
| 721 | 1st Pinion (259) |
| 722 | 1st Pinion (9036) |
| 723 | 2nd Pinion (352) |
| 724 | 2nd Pinion (631) |
| 725 | 2nd Pinion (574) |
| 726 | 2nd Pinion (572) |
| 727 | 2nd Pinion (573) |
| 728 | 2nd Wheel (353) |
| 729 | 2nd Wheel (571) |
| 730 | 3rd Pinion (3379) |
| 731 | Gear (570) |
| 732 | Gear (637) |
| 733 | Pinion (4386) |
| 734 | Pinion (642) |
| 735 | Elevators |
| 736 | Elevator Belt M-24 Rubber (300mm 4 ply (polyster )3mm top 1.5mm bottom |
| 737 | Elevator Belt M-24 Rubber (250mm 3 ply (polyster )3mm top 1.5mm bottom |
| 738 | Seam Less Buckets 10\" Size (10\" x 6\" x 5\" gauge 18 Hole 3/6\" 3 Nos) |
| 739 | Seam Less Buckets 8\" Size (8\" x 5-1/2 x4-1/2\" gauge 18 Hole 1/8\" 2 Nos.) |
| 740 | Bearing and General Item |
| 741 | V\" Belts-Fenner |
| 742 | V\" Belts-Polycon |
| 743 | V\" Belts-PIX |
| 744 | V\" Belts-Dunlop |
| 745 | V\" Belts-Apollo |
| 746 | V\" Belts-Rolax |
| 747 | Tyre Coupling Complete-Fenner |
| 748 | Tyre Coupling Complete-HIC |
| 749 | Tyre Coupling Complete-Octaforce |
| 750 | Tyre Coupling Complete-Unique |
| 751 | Tyre For Tyre Coupling-Fenner |
| 752 | Tyre For Tyre Coupling-HIC |
| 753 | Tyre For Tyre Coupling-Octaforce |
| 754 | Tyre For Tyre Coupling-Unique |
| 755 | Bush type/Tyre Couplings Complete Set-Unique |
| 756 | Bush type/Tyre Couplings Complete Set-Fenner |
| 757 | Rubber lovejoy Coupling-Spider |
| 758 | Welding Electrodes-Anand |
| 759 | Welding Electrodes-Moon-Arc |
| 760 | Welding Electrodes-NOVA |
| 761 | Welding Electrodes-Stone Bridge |
| 762 | Welding Electrodes-Hobart |
| 763 | S.S.Welding Electrodes-Anand |
| 764 | Steam Valves-Sant |
| 765 | Steam Valves-Leader |
| 766 | Bearing-KOYO |
| 767 | Bearing-NTN JAPAN |
| 768 | Bearing-FAG |
| 769 | Bearing-SKF |
| 770 | Bearing-NBC |
| 771 | Bearing-ZKL |
| 772 | Bearing-JMC |
| 773 | Bearing-URB |
| 774 | Bearing -Pedestal |
| 775 | Bearing Sleeve-HKG |
| 776 | Bearing Sleeve-JMC |
| 777 | Bearing Sleeve-GMR |
| 778 | Pedestal for Bearings-JNP |
| 779 | Pedestal for Bearings-JNZ |
| 780 | Pedestal for Bearings-JMC |
| 781 | Pedestal for Bearings-GMR |
| 782 | Bearing Housing-NTN JAPAN |
| 783 | Soleniod Valve with Coil-Airmax |
| 784 | Soleniod Valve with Coil-Festo |
| 785 | Soleniod Valve with Coil-Janatics |
| 786 | Soleniod Valve with Coil-Datta |
| 787 | Soleniod Valve with Coil-Akari |
| 788 | Soleniod Valve- Akari |
| 789 | Soleniod Valve- Datta |
| 790 | Soleniod Valve- Airmax |
| 791 | Soleniod Valve- Festo |
| 792 | Soleniod Valve Filter-Airmax |
| 793 | Soleniod Valve Filter-Akari |
| 794 | Seal Kit for Solenniod Valve-Airmax |
| 795 | Pneumatic Air Cylinder-Festo |
| 796 | Pneumatic Air Cylinder-Airmax |
| 797 | Pneumatic Air Cylinder-Datta |
| 798 | Pneumatic Connector-Festo |
| 799 | Pneumatic Connector-Akari |
| 800 | Pneumatic Connector-Airmax |
| 801 | Pneumatic Jointer-Festo |
| 802 | Pneumatic Jointer-Akari |
| 803 | Pneumatic Jointer-Airmax |
| 804 | Pneumatic Air Valve Seting T-Festo |
| 805 | Pneumatic Air Valve Seting T-Akari |
| 806 | Pneumatic Air Valve Seting T-Airmax |
| 807 | Pneumatic Elbow-Festo |
| 808 | Pneumatic Elbow-Akari |
| 809 | Pneumatic Elbow-Airmax |
| 810 | Sprocket Chain ?2\" Simplex-Diamond |
| 811 | Sprocket Chain ¾\" Simplex-Diamond |
| 812 | Sprocket Chain 1\" Simplex-Diamond |
| 813 | Sprocket Chain ?2\" Simplex-Rollon |
| 814 | Sprocket Chain ¾\" Simplex-Rollon |
| 815 | Sprocket Chain 1\" Simplex-Rollon |
| 816 | Sprocket Chain ?2\" Duplex-Diamond |
| 817 | Sprocket Chain ¾\" Duplex-Diamond |
| 818 | Sprocket Chain 1\" Duplex-Diamond |
| 819 | Sprocket Chain ?2\" Duplex-Rollon |
| 820 | Sprocket Chain ¾\" Duplex-Rollon |
| 821 | Sprocket Chain 1\" Duplex-Rollon |
| 822 | Oil Seal-Voston Plus |
| 823 | Electrical Item |
| 824 | Contactors All Types-ABB |
| 825 | Contactors All Types-Havells |
| 826 | Contactors All Types-L&T |
| 827 | Contactors All Types-SIEMENS |
| 828 | Spare Kits For Contactors-ABB |
| 829 | Spare Kits For Contactors-Havells |
| 830 | Spare Kits For Contactors-L&T |
| 831 | Spare Kits For Contactors-SIEMENS |
| 832 | Coil For Contactors-L&T |
| 833 | Coil For Contactors-SIEMENS |
| 834 | Coil For Contactors-BCH |
| 835 | MCCB-ABB |
| 836 | MCCB-Havells |
| 837 | MCCB-L&T |
| 838 | MCCB-SIEMENS |
| 839 | MCB-ABB |
| 840 | MCB-Havells |
| 841 | MCB-L&T |
| 842 | MCB-SIEMENS |
| 843 | MPCB-ABB |
| 844 | MPCB-L&T |
| 845 | MPCB- SIEMENS |
| 846 | MPCB-Havells |
| 847 | Fuses-ABB |
| 848 | Fuses-Havells |
| 849 | Fuses-Siemens |
| 850 | Fuses- L&T |
| 851 | Fuse base-ABB |
| 852 | Fuse base-Havells |
| 853 | Fuse base-Siemens |
| 854 | Fuse base- L&T |
| 855 | Overload Relays-ABB |
| 856 | Overload Relays-L&T |
| 857 | Overload Relays-SIEMENS |
| 858 | Overload Relays- Havells |
| 859 | PVC Wire-HAVELLS |
| 860 | PVC Wire-POLYCAB |
| 861 | Electric Motor 3 Phase-SIEMENS |
| 862 | Electric Motor 3 Phase-BHARAT BIJLI |
| 863 | Electric Motor 3 Phase-ABB |
| 864 | Gear Motor 3 Phase-PBL |
| 865 | Gear Motor 3 Phase-SIEMENS |
| 866 | Gear Motor 3 Phase-ELECON |
| 867 | Gear Motor 3 Phase-NEWBHARAT |
| 868 | Gear Box with Motor 3 Phase-PBL |
| 869 | Gear Box with Motor 3 Phase-SIEMENS |
| 870 | Gear Box with Motor 3 Phase-ELECON |
| 871 | Gear Box with Motor 3 Phase-NEW BHARAT |
| 872 | Gear Box with Motor-PBL |
| 873 | Gear Box -PBL |
| 874 | Gear Box -Siemens |
| 875 | Gear Box -Elcon |
| 876 | Gear Box -New Bharat |
| 877 | Multistrand Wires-ABB |
| 878 | Multistrand Wires-Siemens |
| 879 | Multistrand Wires-Havells |
| 880 | Multistrand Wires-L&T |
| 881 | Multistrand Wires-KINGSWAY |
| 882 | Multistrand Wires-KEI |
| 883 | Multistrand Wires-VIMAL |
| 884 | Aluminium Armoured Cables-KINGSWAY |
| 885 | Aluminium Armoured Cables-ABB |
| 886 | Aluminium Armoured Cables-Siemens |
| 887 | Aluminium Armoured Cables-Havells |
| 888 | Aluminium Armoured Cables-L&T |
| 889 | Aluminium Armoured Cables-KEI |
| 890 | Copper Armoured Cables-Havells |
| 891 | Copper Armoured Cables-L&T |
| 892 | Copper Armoured Cables-KEI |
| 893 | Copper Armoured Cables-KINGSWAY |
| 894 | Soft Starters-ABB |
| 895 | Soft Starters-Havells |
| 896 | Soft Starters-L&T |
| 897 | Soft Starters-Siemens |
| 898 | Soft Starters-Danfoss |
| 899 | Push Button (On, Off) with Elecment (Red & Green Colour)-Teknic |
| 900 | R,Y,B, Indicating Lamp (LED type) (240V AC, 22.5 sq.mm)-L & T |
| 901 | Add-On Block (4 No, 2 No-2 NC, 1 No)-L & T |
| 902 | Selec timer (230V AV, 50-60HZ 10VA Max)-L & T |
| 903 | Limit Switch (24V DC)-L & T |
| 904 | Limit Switch (24V DC)-Siemens |
| 905 | Reed Switch(24V DC)-L & T |
| 906 | Reed Switch(24V DC)-Siemens |
| 907 | Proximity Sensor (HL,LL) (12-24V DC)-Dolfin |
| 908 | CAPASITOR 2 KVR TO 25 KVR-ABB |
| 909 | CAPASITOR 2 KVR TO 25 KVR-SIEMENS |
| 910 | CAPASITOR 2 KVR TO 25 KVR-SUNIDER |
| 911 | Air Cricuit Breaker 1000AMP-L & T |
| 912 | Air Cricuit Breaker 1000AMP-Siemens |
| 913 | Air Cricuit Breaker 1600AMP-L & T |
| 914 | Air Cricuit Breaker 1600AMP-Siemens |
| 915 | Rate for Cattle Feed Plant, Nadbai (Mechanical Spare Part) |
| 916 | PELLET MILLS SPARES (CEASPL MAKE) |
| 917 | Pellet die holeSize 10mm |
| 918 | Pellet die holeSize 8mm |
| 919 | Die ring front for SUSRW pellet mill |
| 920 | Die ring rear for SUSRW pellet mill |
| 921 | Counter Shaft with pully for pellet mill |
| 922 | Shear pin block with key way safety body of pellet mill |
| 923 | Shear pin for safety body of pellet mill |
| 924 | Bushing for safety body of pellet mill |
| 925 | End Cover for pellet mill |
| 926 | Pellet cooler sensor |
| 927 | Pellet cooler eccentric assembly |
| 928 | Front scraper blades for pellet mill |
| 929 | Rear scraper for pellet mill |
| 930 | Pellet mill pully 1200X300X11 Grooves |
| 931 | Roller holder shaft for pellet mill suitable for bearing No. NU328 & 22224 with lock nut washer (T Shaft) |
| 932 | Lock Nut with washer for pellet mill main ‘T’ Shaft |
| 933 | Taflone Bush for main ‘T’ Shaft |
| 934 | Screw for variable speed feeder conditioner for pellet mill |
| 935 | SS plan peddle for pellet mill feeder conditioner |
| 936 | SS loop type peddle for pellet mill feeder conditioner |
| 937 | SS sperical washeral & SS nut for pellet mill feeder conditioner |
| 938 | Fibber Wheel with SS boch for pellet feeder conditioner Right Side/Left Side |
| 939 | Fibber Wheel without SS boch for pellet feeder conditioner |
| 940 | Pellet Cooler Sensor |
| 941 | Center bolt for Pellet Machine 8 soot X 5½” |
| 942 | Pellet Cooler air lock high 450mm width 250mm Inlet/Outlet 155mm |
| 943 | Press Roll Assembly Items(CEASPL MAKE) |
| 944 | Press roll shell wider for pellet mill |
| 945 | Press roll assembly for pellet mill |
| 946 | SS roll mounting stud (pellet mill holding Stude) |
| 947 | Frount scraper stay plate assembly for pellet mill |
| 948 | Locking device for press roll setting |
| 949 | Bearing cover for press roll assembly |
| 950 | Sealing ring for press role assembly |
| 951 | Circlip lock 180mm for press roll assembly |
| 952 | Lock nut with lock washer for press roll eccentric shaft. |
| 953 | Eccentric Shaft |
| 954 | Distance piece for press roll assembly |
| 955 | Lock Washer MB 20 for Eccentiric Saft |
| 956 | Chain Conveyor Items |
| 957 | Raddler chain 125 mm pitch suitable for 20 MT/hr chain conveyor with bulk density 600 Kg/cm3 material matching our existing chain conveyor. Chain should 10mm thick links along with bushes and roller duly hardened. |
| 958 | Slate Conveyor Items |
| 959 | Chain suitabel for slat conveyor 125 mm pitch with bulk dencity 600 Kg./cm3 material, matching to our existing slat conveyor. Chain links should 6 mm thick along with bushes and roller dully hardened 60 metre in length. |
| 960 | Slate Conveyor Flat Patta with allen key bolts |
| 961 | Hammer Mill Spares (CEASPL MAKE) |
| 962 | Hammer mill rotor complete machined assembled man alloy steel shaft, dynamically balanced consisting of spares carring rod, spacer, beators locknut bolt etc. |
| 963 | Spacer for hammers (42+36+6) each set |
| 964 | Carringrod for hammer mill 6 No of each set |
| 965 | Sieve for hammer mill hole dia |
| 966 | Hammer mill beaters M type 78 Nos of each set weight must be equal in each other of all set. |
| 967 | Hammer rotor lock washer with allen type bolt. |
| 968 | Door Closing clamp set for hammer machine |
| 969 | Clamping frame for hammer machine’s sieve |
| 970 | Gravity Pipes |
| 971 | M.S. Pipe 8” OD, 2.5 mm thick Length should not, Be less than 8ft |
| 972 | M.S. Pipe 10” OD, 2.5 mm thick Length should not Be less than 8ft |
| 973 | M.S. Flange 10” Holed 4.00mm thick |
| 974 | M.S. Flange 8” Holed 4.00mm thick |
| 975 | MS Pipe 12” (2.5mm thick) Length shuld not be less than 8ft |
| 976 | MS Flange 12” Holed 4.00 mm thick |
| 977 | M.S. Pipe Seem less ‘C’ Class 2” NB/3”NB |
| 978 | M.S. Pipe Seem less ‘C’ Class 1” NB |
| 979 | M.S. Pipe Seem less ‘C’ Class ¾” NB |
| 980 | Sight Glass with clamps 150mmODx200mm height 200mm ODx200mm height suitable to air locks & pre-weighing section |
| 981 | Elevator Spare Part Items |
| 982 | Elevator belt 4 ply 300mm width 3mm top 1.5mm bottom rubber coating Dunlop / MRF/ ESCON MAKE/ Fenner Make |
| 983 | Elevator belt 4 ply 250mm width 3mm top 1.5mm bottom rubber coating Dunlop / MRF/ ESCON MAKE/ Fenner Make |
| 984 | Elevator bucket 10”, 16 Gauge with three hole |
| 985 | Elevator bucket 8”, 16 Gauge with three hole |
| 986 | Patta Bolt 3/8 X 1¼” |
| 987 | Patta Bolt 3/8X2” |
| 988 | Patta Bolt 5/16X1¼ |
| 989 | Chain Sprocket |
| 990 | Sprocket 45 teeth 1”pitch Duplex (Bore 60mm, 16X8mm Keyway.) |
| 991 | Sprocket 17 teeth 1”pitch Duplex (Bore 50mm 12X6 Kay Way) |
| 992 | Sprocket 19teeth 1” simplex Rolon/Diamond make |
| 993 | Sprocket 17 teeth 1” simplex Rolon/Diamond make |
| 994 | Sprocket 8 teeth X 125mm Pitch for Reddler type chain |
| 995 | Sprocket 6teeth x 125mm for Reddler type chain Rolon/ Diamond make |
| 996 | Sprocket 27 teeth 1” pitch bore 50mm 12X6 Keyway simplex. |
| 997 | Bearing and General Item |
| 998 | V\" Belts-Fenner |
| 999 | V\" Belts-Polycon |
| 1000 | V\" Belts-SKF |
| 1001 | V\" Belts-PIX |
| 1002 | V\" Belts-Dunlop |
| 1003 | V\" Belts-Apollo |
| 1004 | V\" Belts-Rolax |
| 1005 | Tyre Coupling Complete-Fenner |
| 1006 | Tyre Coupling Complete-HIC |
| 1007 | Tyre Coupling Complete-Octaforce |
| 1008 | Tyre Coupling Complete-Unique |
| 1009 | Tyre For Tyre Coupling-Fenner |
| 1010 | Tyre For Tyre Coupling-HIC |
| 1011 | Tyre For Tyre Coupling-Octaforce |
| 1012 | Tyre For Tyre Coupling-Unique |
| 1013 | Bush type/Tyre Couplings Complete Set-Unique |
| 1014 | Bush type/Tyre Couplings Complete Set-Fenner |
| 1015 | MS Rubber lovejoy Coupling-Spider |
| 1016 | Welding Electrodes-Anand |
| 1017 | Welding Electrodes-Moon-Arc |
| 1018 | Welding Electrodes-NOVA |
| 1019 | Welding Electrodes-Stone Bridge |
| 1020 | Welding Electrodes-Hobart |
| 1021 | S.S.Welding Electrodes-Anand |
| 1022 | Steam Valves-Sant |
| 1023 | Steam Valves-Leader |
| 1024 | Bearing-KOYO |
| 1025 | Bearing-NTN JAPAN |
| 1026 | Bearing-FAG |
| 1027 | Bearing-SKF |
| 1028 | Bearing-NBC |
| 1029 | Bearing-ZKL |
| 1030 | Bearing-JMC |
| 1031 | Bearing-URB |
| 1032 | Bearing Sleeve-HKG |
| 1033 | Bearing Sleeve-NHB |
| 1034 | Bearing Sleeve-HFK |
| 1035 | Bearing Sleeve-JMC |
| 1036 | Bearing Sleeve-GMR |
| 1037 | Pedestal for Bearings-JNP |
| 1038 | Pedestal for Bearings-JNZ |
| 1039 | Pedestal for Bearings-JMC |
| 1040 | Pedestal for Bearings-GMR |
| 1041 | Bearing Housing-NTN JAPAN |
| 1042 | Soleniod Valve with Coil-Airmax |
| 1043 | Soleniod Valve with Coil-Festo |
| 1044 | Soleniod Valve with Coil-Janatics |
| 1045 | Soleniod Valve with Coil-Datta |
| 1046 | Soleniod Valve with Coil-Akari |
| 1047 | Soleniod Valve Filter-Airmax |
| 1048 | Soleniod Valve Filter-Akari |
| 1049 | Seal Kit for Solenniod Valve-Airmax |
| 1050 | Pneumatic Air Cylinder-Festo |
| 1051 | Pneumatic Air Cylinder-Airmax |
| 1052 | Pneumatic Air Cylinder-Datta |
| 1053 | Pneumatic Connector-Festo |
| 1054 | Pneumatic Connector-Akari |
| 1055 | Pneumatic Connector-Airmax |
| 1056 | Pneumatic Jointer-Festo |
| 1057 | Pneumatic Jointer-Akari |
| 1058 | Pneumatic Jointer-Airmax |
| 1059 | Pneumatic Air Valve Seting T-Festo |
| 1060 | Pneumatic Air Valve Seting T-Akari |
| 1061 | Pneumatic Air Valve Seting T-Airmax |
| 1062 | Pneumatic Elbow-Festo |
| 1063 | Pneumatic Elbow-Akari |
| 1064 | Pneumatic Elbow-Airmax |
| 1065 | Sprocket Chain ?2\" Simplex-Diamond |
| 1066 | Sprocket Chain ¾\" Simplex-Diamond |
| 1067 | Sprocket Chain 1\" Simplex-Diamond |
| 1068 | Sprocket Chain ?2\" Simplex-Rollon |
| 1069 | Sprocket Chain ¾\" Simplex-Rollon |
| 1070 | Sprocket Chain 1\" Simplex-Rollon |
| 1071 | Sprocket Chain ?2\" Duplex-Diamond |
| 1072 | Sprocket Chain ¾\" Duplex-Diamond |
| 1073 | Sprocket Chain 1\" Duplex-Diamond |
| 1074 | Sprocket Chain ?2\" Duplex-Rollon |
| 1075 | Sprocket Chain ¾\" Duplex-Rollon |
| 1076 | Sprocket Chain 1\" Duplex-Rollon |
| 1077 | Oil Seal-Voston Plus |
| 1078 | MS Lovejoy Coupling complete Set Spider |
| 1079 | Rubber Lovejoy Coupling Spider |
| 1080 | Servogem 3 Grease |
| 1081 | Electrical Item |
| 1082 | Contactors All Types-ABB |
| 1083 | Contactors All Types-Havells |
| 1084 | Contactors All Types-L&T |
| 1085 | Contactors All Types-SIEMENS |
| 1086 | Contactors All Types- BCH |
| 1087 | Spare Kits For Contactors-ABB |
| 1088 | Spare Kits For Contactors-Havells |
| 1089 | Spare Kits For Contactors-L&T |
| 1090 | Spare Kits For Contactors-SIEMENS |
| 1091 | Spare Kits For Contactors-BCH |
| 1092 | Coil For Contactors-L&T |
| 1093 | Coil For Contactors-SIEMENS |
| 1094 | Coil For Contactors-BCH |
| 1095 | MCCB-ABB |
| 1096 | MCCB-Havells |
| 1097 | MCCB-L&T |
| 1098 | MCCB-SIEMENS |
| 1099 | MCCB-BCH |
| 1100 | MCB-ABB |
| 1101 | MCB-Havells |
| 1102 | MCB-L&T |
| 1103 | MCB-SIEMENS |
| 1104 | MCB-BCH |
| 1105 | MPCB-ABB |
| 1106 | MPCB-L&T |
| 1107 | MPCB- SIEMENS |
| 1108 | MPCB-BCH |
| 1109 | Fuses-ABB |
| 1110 | Fuses-Havells |
| 1111 | Fuses-Siemens |
| 1112 | Fuses- L&T |
| 1113 | Fuse base-ABB |
| 1114 | Fuse base-Havells |
| 1115 | Fuse base-Siemens |
| 1116 | Fuse base- L&T |
| 1117 | Overload Relays-ABB |
| 1118 | Overload Relays-L&T |
| 1119 | Overload Relays-SIEMENS |
| 1120 | Overload Relays- BCH |
| 1121 | PVC Wire-HAVELLS |
| 1122 | PVC Wire-POLYCAB |
| 1123 | Electric Motor 3 Phase-SIEMENS |
| 1124 | Electric Motor 3 Phase-BHARAT BIJLI |
| 1125 | Electric Motor 3 Phase-ABB |
| 1126 | Gear Motor 3 Phase-PBL |
| 1127 | Gear Motor 3 Phase-SIEMENS |
| 1128 | Gear Motor 3 Phase-ELECON |
| 1129 | Gear Motor 3 Phase-NEWBHARAT |
| 1130 | Gear Box with Motor 3 Phase-PBL |
| 1131 | Gear Box with Motor 3 Phase-SIEMENS |
| 1132 | Gear Box with Motor 3 Phase-ELECON |
| 1133 | Gear Box with Motor 3 Phase-NEW BHARAT |
| 1134 | Gear Box with Motor-PBL |
| 1135 | Multistrand Wires-ABB |
| 1136 | Multistrand Wires-Siemens |
| 1137 | Multistrand Wires-Havells |
| 1138 | Multistrand Wires-L&T |
| 1139 | Multistrand Wires-KINGSWAY |
| 1140 | Multistrand Wires-KEI |
| 1141 | Multistrand Wires-VIMAL |
| 1142 | Aluminium Armoured Cables-KINGSWAY |
| 1143 | Aluminium Armoured Cables-ABB |
| 1144 | Aluminium Armoured Cables-Siemens |
| 1145 | Aluminium Armoured Cables-Havells |
| 1146 | Aluminium Armoured Cables-L&T |
| 1147 | Aluminium Armoured Cables-KEI |
| 1148 | Copper Armoured Cables-Havells |
| 1149 | Copper Armoured Cables-L&T |
| 1150 | Copper Armoured Cables-KEI |
| 1151 | Copper Armoured Cables-KINGSWAY |
| 1152 | Soft Starters-ABB |
| 1153 | Soft Starters-Havells |
| 1154 | Soft Starters-L&T |
| 1155 | Soft Starters-Siemens |
| 1156 | Soft Starters-Danfoss |
| 1157 | Micro Drive for Pannel Danfoss/ Siemens |
| 1158 | Push Button (On, Off) with Elecment (Red & Green Colour)-Teknic |
| 1159 | R,Y,B, Indicating Lamp (LED type) (240V AC, 22.5 sq.mm)-L & T |
| 1160 | Add-On Block (4 No, 2 No-2 NC, 1 No)-L & T |
| 1161 | Selec timer (230V AV, 50-60HZ 10VA Max)-L & T |
| 1162 | Limit Switch (24V DC)-L & T |
| 1163 | Limit Switch (24V DC)-Siemens |
| 1164 | Reed Switch(24V DC)-L & T |
| 1165 | Reed Switch(24V DC)-Siemens |
| 1166 | Proximity Sensor (HL,LL) (12-24V DC)-Dolfin |
| 1167 | CAPASITOR 2 KVR TO 25 KVR-ABB |
| 1168 | CAPASITOR 2 KVR TO 25 KVR-SIEMENS |
| 1169 | CAPASITOR 2 KVR TO 25 KVR-SUNIDER |
| 1170 | Air Cricuit Breaker 1000AMP-L & T |
| 1171 | Air Cricuit Breaker 1000AMP-Siemens |
| 1172 | Air Cricuit Breaker 1600AMP-L & T |
| 1173 | Air Cricuit Breaker 1600AMP-Siemens |
| 1174 | Rate for Cattle Feed Plant, Lambiyakalan (Mechanical Spare Part) |
| 1175 | Super Senior Pellet Mill (HEPL MAKE) |
| 1176 | Bearing Setting Ring (Forged Steel) |
| 1177 | Die Cover Ring (Forged Steel) |
| 1178 | Die Holder (Steel) (Forged Steel) |
| 1179 | Die Holder Assembly (Forged Steel) |
| 1180 | Pellet Mill Die 8 MM |
| 1181 | Pellet Mill Die 10 MM |
| 1182 | DieHolder Ring Rear Suitable For Above Alloy Steel |
| 1183 | Die Holder Ring Front (Forged Steel) |
| 1184 | Pellet Die Screber (Rear Scraper) (Forged Steel) |
| 1185 | Roll Holder Shaft (T Shaft) Assembly Steel |
| 1186 | Pellet Mill Sieve-5MM Hole 3MM Thick S.S. |
| 1187 | Teflon/Brash Bush For Main T Shaft |
| 1188 | Pellet Mill Dor Lock |
| 1189 | Pellet Capsule Knife S.S. |
| 1190 | Pellet Counter Pully 9\"x9 spc |
| 1191 | Pellet Counter Pully Shaft without Bearing & Plumber Block |
| 1192 | Shear Pin 18 MM |
| 1193 | Shear Pin Hold Ring Body |
| 1194 | Pellet Main Pully 9 SPC Group |
| 1195 | Pellet Capsule without Shaft Bearing |
| 1196 | Counctor Pulley Shaft 9\"Dia 70 MM, 85 MM Long |
| 1197 | Pellet Mill Blower Assembly M.S./S.S. |
| 1198 | Pellet Mill Blower Fan (IMPLER) |
| 1199 | Pellet Mill Blower Foundation |
| 1200 | Dumper All Type |
| 1201 | Blower Cyclon M.S.4MM Thick/S.S. 3MM Thick |
| 1202 | Blower Cyclone Air Lock |
| 1203 | Blower Line S.S./M.S. |
| 1204 | Pellet Feeder Body M.S. |
| 1205 | Pellet Feeder Knife S.S |
| 1206 | Pellet Feeder Shaft S.S. |
| 1207 | Pellet Rubber Belt 650mm W 10/15 thick |
| 1208 | Jumbo Extra wide Pellet Mill(HEPL MAKE) |
| 1209 | Bearing Setting Ring (Forged Steel) |
| 1210 | Die Cover Ring (Forged Steel) |
| 1211 | Die Holder (Steel) (Forged Steel) |
| 1212 | Die Holder Assembly (Forged Steel) |
| 1213 | Pellet Mill Die 8 MM |
| 1214 | Pellet Mill Die 10 MM |
| 1215 | DieHolder Ring Rear Suitable For Above Alloy Steel |
| 1216 | Die Holder Ring Front (Forged Steel) |
| 1217 | Pellet Die Screber (Rear Scraper) (Forged Steel) |
| 1218 | Roll Holder Shaft (T Shaft) Assembly Steel |
| 1219 | Pellet Mill Sieve-5MM Hole 3MM Thick S.S. |
| 1220 | Teflon/Brash Bush For Main T Shaft |
| 1221 | Pellet Mill Dor Lock |
| 1222 | Pellet Capsule Knife S.S. |
| 1223 | Pellet Counter Pully 9\"x9 spc |
| 1224 | Pellet Counter Pully Shaft without Bearing & Plumber Block |
| 1225 | Shear Pin 18 MM |
| 1226 | Shear Pin Hold Ring Body |
| 1227 | Pellet Main Pully 9 SPC Group |
| 1228 | Pellet Capsule without Shaft Bearing |
| 1229 | Counctor Pulley Shaft 9\"Dia 70 MM, 85 MM Long |
| 1230 | Pellet Mill Blower Assembly M.S./S.S. |
| 1231 | Pellet Mill Blower Fan (IMPLER) |
| 1232 | Pellet Mill Blower Foundation |
| 1233 | Pellet Mill Blower Dumper |
| 1234 | Blower Cyclon M.S.4MM Thick/S.S. 3MM Thick |
| 1235 | Blower Cyclone Air Lock |
| 1236 | Blower Line S.S. |
| 1237 | Pellet Feeder Body M.S. |
| 1238 | Pellet Feeder Knife S.S |
| 1239 | Pellet Feeder Shaft S.S. |
| 1240 | Press Roll Assembly Super Senior (HEPL MAKE) |
| 1241 | Roller Shell Super SR (HEPL Make) |
| 1242 | Roller Shell Super SRComplete(HEPL Make) |
| 1243 | Roller Shell Accentric Shaft Super SR |
| 1244 | Clamping Device Male & Female (Roller Setting Ring) |
| 1245 | Centre Nut Head Elen Key Type |
| 1246 | Centre Bold Head |
| 1247 | Circlip for Roller Shell |
| 1248 | Lock Washer Acentric Type |
| 1249 | Middle Space for roller shell |
| 1250 | Middle Spacer for clamping device |
| 1251 | Hexagonal locking assembly SU.SE |
| 1252 | Front Scraper Plate SU. SE |
| 1253 | Shear Pin SU. SR |
| 1254 | Shear pin block SU.SR |
| 1255 | Bearing Retainer/Nut For Accentic Shaft |
| 1256 | Center Bolt/Rollar Stud (Allen Bolt Head Type Design) |
| 1257 | Lock Nut with Lock Washer For Press Roll Accentic Shaft |
| 1258 | Lock Washer |
| 1259 | Nut For Center Bolt (Lighting Ring) |
| 1260 | Spacer (Sealing Ring) |
| 1261 | Bearing Cover |
| 1262 | Clamping Device Tension Ring |
| 1263 | Distance Ring |
| 1264 | Accentic Shaft Press Roll |
| 1265 | Press Roll Shell Complete |
| 1266 | Setting Ring |
| 1267 | Press Roll Shell |
| 1268 | Chack Nut Accentic Shaft |
| 1269 | Press Roll Assembly Jumbo Extra wide(HEPL MAKE) |
| 1270 | Bearing Retainer/Nut For Accentic Shaft |
| 1271 | Center Bolt/Rollar Stud (Allen Bolt Head Type Design) |
| 1272 | Lock Nut with Lock Washer For Press Roll Accentic Shaft |
| 1273 | Lock Washer |
| 1274 | Nut For Center Bolt (Lighting Ring) |
| 1275 | Spacer (Sealing Ring) |
| 1276 | Bearing Cover |
| 1277 | Clamping Device Tension Ring |
| 1278 | Distance Ring |
| 1279 | Accentic Shaft Press Roll |
| 1280 | Press Roll Shell Complete |
| 1281 | Setting Ring |
| 1282 | Press Roll Shell |
| 1283 | Screw Conveyor (HEPL MAKE) |
| 1284 | Gravity Pipe Clamping For Above Pipe 8\" Dia |
| 1285 | Gravity Pipe M.S. 8\" Dia |
| 1286 | Gravity Pipe S.S. 8\" Dia |
| 1287 | Shaft Suitable For Joining the Screw Conveyor |
| 1288 | Screw of Different Size |
| 1289 | Screw Conveyor All size |
| 1290 | Screw Conveyor Hanger Bearing all size |
| 1291 | Chain Sprocket |
| 1292 | 11 Teeth ,15 Teeth, 16 Teeth, 17 Teeth ,19 Teeth , 20 Teeth , 22 Teeth , 32 Teeth , 40 Teeth, 45 Teeth . Simplex& Duplex As req |
| 1293 | Sprocket 20 teeth 1” pitch Duplex (Bore 63mm,56mm and 50mm 16x6 mm Keyway) |
| 1294 | Sprocket 30 teeth 1” pitch Duplex (Bore 84mm, 16x5mm key Way) |
| 1295 | Sprocket 19 teeth 1” simplex (Bore 55mm 10x5 key Way) |
| 1296 | Sprocket 16 teeth 1’’ simplex (Bore 45mm,32mm,30mm 10x5 key Way) |
| 1297 | Sprocket 25 teeth 1” Pitch Simplex (Bore 45mm, 10x5 key way) |
| 1298 | Sprocket 10 teeth 1” Pitch Simplex (Bore 38mm, 10x4 key way ) |
| 1299 | Sprocket 25 teeth 1” Pitch Simplex (Bore 45mm, 10x5 key way) |
| 1300 | Sprocket 20 teeth 1” Pitch Simplex (Bore 48mm, 14x5.5 key way) |
| 1301 | Sprocket 40 teeth 1” Pitch Simplex (Bore 60mm, 14x5.5 key way) |
| 1302 | Sprocket 40 teeth 1” Pitch (Duplex) (Bore 60mm, 16x8 key way) |
| 1303 | Sprocket 9 teeth for Reddler type chain (20x10 deep,Bore 75mm,Keyway 30mm thick) |
| 1304 | Chain conveyor 385 MM (HEPL MAKE) |
| 1305 | Reddlar Chain 385MM Heavy |
| 1306 | Reddlar Head Sprocket (9 TEETH75MM BORE / 20X10 MM DEEP K/W 30MM THICK) |
| 1307 | Reddlar Head Sprocket (75MM BORE / 20X10 MM DEEP K/W 30MM THICK PLAIN) |
| 1308 | Reddlar Head Sprcket Shaft |
| 1309 | Reddlar Tail Sprocket Shaft |
| 1310 | 385 MM Chain conveyor COLUM |
| 1311 | 385 MM Chain conveyor FRONT HEAD |
| 1312 | 385 MM Chain conveyor BACK HEAD |
| 1313 | Chain conveyor 185 MM(HEPL MAKE) |
| 1314 | Reddlar Chain 185MM Heavy |
| 1315 | Reddlar Head Sprocket Shaft |
| 1316 | Reddlar Reader Tail Sprocket Shaft |
| 1317 | 185 MM Chain Conveyor FRONT HEAD BOX |
| 1318 | 185 MM Chain ConveyorBACK HEAD BOX |
| 1319 | 185 MM Chain Conveyor inside Reling Taplon (PVC) |
| 1320 | 185 MM Reling Side Sport |
| 1321 | 185 MM Chain Center Roller |
| 1322 | 185 MM Chain Lock Set |
| 1323 | 385 MM Chain Conveyor Inside Reling Taplon (PVC) |
| 1324 | 385 MM Reling Side Sport |
| 1325 | 385 MM Chain Center Roller |
| 1326 | 385 MM Chain Lock Set |
| 1327 | 185 MM Chain Conveyor Coloum |
| 1328 | Elevator (HEPL MAKE) |
| 1329 | Elevator 12\" Top/Bottom Assembly |
| 1330 | Elecator 12\" Collom (BOX, STD 425X360 MM L BEND (RISHI LASER) |
| 1331 | Elevator 12\" Back Stoper |
| 1332 | Elevator 12\" Bucket 12\"X6\"x5\" PRE DRILLED 3 HOLE ATMMP) |
| 1333 | Elevator 12\" Belt PRE DRILLED 3 HOLE |
| 1334 | Elevator 12\" Bucket Nut/Bolt with Washer All Size |
| 1335 | Flat Belt Conveyor Roler Through Dia 40MM X 750 MM Long |
| 1336 | Elevator 12\" Top Pulley |
| 1337 | Elevator 12\" Bottom Pulley |
| 1338 | Elevator 12\" Top & Bottom Pulley Shaft without Bearing & Pedestal |
| 1339 | 12\" Elevator Magnet Hump |
| 1340 | Two Way Flamp Pnumatic 10\" |
| 1341 | Slide Gate Menul-400X600 |
| 1342 | Slide Gate Menul-400X400 |
| 1343 | Screw Compresser with Dryer, CPM10D,7KG./SQCMG. |
| 1344 | Hammer Mill Spare(HEPL MAKE) |
| 1345 | Beater (Flat Type) All Equal Weight Ni Hard Dynamically Balanced 140X5X6 mm |
| 1346 | Beater Holding Bush OD3,ID20,L11.5mm |
| 1347 | Bush Rod Sieve 3MM Thick 5MM Hole |
| 1348 | Road Lock Megnatic |
| 1349 | Main Gate Lock |
| 1350 | Hammer Mill Rotor Assembly without Bearing & Plumber Block |
| 1351 | Hammer Mill Rottor Shaft |
| 1352 | Hammer Mill Foundation Dumper |
| 1353 | Hammer Mill Rotary Feeder Rotar |
| 1354 | Hammer Mill Rotary Feeder Rotar Shaft |
| 1355 | Hammer Mill Sieve-5MM Hole, 3 MM Thick M.S |
| 1356 | Hammer Mill Sieve Lock |
| 1357 | Hammer Mill Bush OD-30, ID-20, L-11.5mm |
| 1358 | Hammer Mill Rod Dia 19x606mm Length |
| 1359 | Hammer Mill Beater Set (68 Pieces) 140x5x6mm |
| 1360 | Hammer Mill Sieve Set 830x660x3mm thick 6/8mm perforated |
| 1361 | BOILER DOUBLE ACE 1 TON(DUBLE ACCE MAKE) |
| 1362 | Safety Valve ½” |
| 1363 | Oil Presser Pump |
| 1364 | Leed Plug (FUSIBLE PLUG) 20/25 mm |
| 1365 | Blower Body 2 H.P. Motor |
| 1366 | Fire Gun Set (BURNER ASSEMBLY) |
| 1367 | Nozel 70 KG. |
| 1368 | Magnet Coil(FOR BURNER) 240/440 VOLT |
| 1369 | Steam Valve (IBR) All Size |
| 1370 | Feed Pump (CDL 15 T .P2 1.5 KW,n-2900mm,Hm-132,On 2.0, H-105, Pmak/Tmax 25/90 Bar) |
| 1371 | Regulator Valve 1/2\" |
| 1372 | NRV Valve All size |
| 1373 | Stichwell-Paco Model -81000183(Also allStiching machine spare parts ) |
| 1374 | Bearing and General Item |
| 1375 | V\" Belts-Fenner |
| 1376 | V\" Belts-Unique |
| 1377 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Polyster) |
| 1378 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Fenner) |
| 1379 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Unique) |
| 1380 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Hilton) |
| 1381 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Forex) |
| 1382 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Indos) |
| 1383 | Elevator 12\" Belt 350MM , 12 MM, ,Thickness 4/5 Ply (Dunlop) |
| 1384 | Tyre Coupling Complete-Fenner |
| 1385 | Tyre Coupling Complete Set -Unique |
| 1386 | Tyre Coupling Complete-Unique |
| 1387 | Tyre Coupling Complete-Unique |
| 1388 | Tyre For Tyre Coupling-Fenner |
| 1389 | Tyre For Tyre Coupling-Unique |
| 1390 | Tyre For Tyre Coupling-Octaforce |
| 1391 | Tyre For Tyre Coupling-Unique |
| 1392 | Bush type/Tyre Couplings Complete Set-Unique |
| 1393 | Bush type/Tyre Couplings Complete Set-Fenner |
| 1394 | Rubber lovejoy Coupling-Spider |
| 1395 | Welding Electrodes-Anand |
| 1396 | Welding Electrodes-Moon-Arc |
| 1397 | Welding Electrodes-NOVA |
| 1398 | Welding Electrodes-Stone Bridge |
| 1399 | Welding Electrodes-Hobart |
| 1400 | S.S.Welding Electrodes-Anand |
| 1401 | S.S.Welding Electrodes-Moon -Arc |
| 1402 | S.S.Welding Electrodes-Nova |
| 1403 | S.S.Welding Electrodes-Stone Bridge |
| 1404 | S.S.Welding Electrodes-Hobart |
| 1405 | Steam Valves-Sant |
| 1406 | Steam Valves-Leader |
| 1407 | Bearing-KOYO |
| 1408 | Bearing-NTN JAPAN |
| 1409 | Bearing-FAG |
| 1410 | Bearing-SKF |
| 1411 | Bearing-ZKL |
| 1412 | Bearing Sleeve-HKG |
| 1413 | Bearing Sleeve-JMC |
| 1414 | Bearing Sleeve-GMR |
| 1415 | Pedestal for Bearings-JNP |
| 1416 | Pedestal for Bearings-JNZ |
| 1417 | Pedestal for Bearings-JMC |
| 1418 | Pedestal for Bearings-GMR |
| 1419 | Bearing Housing-NTN JAPAN |
| 1420 | Soleniod Valve with Coil-Airmax |
| 1421 | Soleniod Valve with Coil-Festo |
| 1422 | Soleniod Valve with Coil-Janatics |
| 1423 | Soleniod Valve with Coil-Datta |
| 1424 | Soleniod Valve with Coil24 Volt + 240 Volt -Festo |
| 1425 | Soleniod Valve with Coil24 Volt + 240 Volt -Airmax |
| 1426 | Soleniod Valve with Coil24 Volt + 240 Volt -Akari |
| 1427 | Soleniod Valve Filter Conveyor -Festo |
| 1428 | Soleniod Valve Filter Conveyor -Airmax |
| 1429 | Soleniod Valve Filter Conveyor -Akari |
| 1430 | Drain Valve Auto 1/2\"-Festo |
| 1431 | Drain Valve Auto 1/2\" -Airmax |
| 1432 | Drain Valve Auto 1/2\" -Akari |
| 1433 | Seal Kit for Solenniod Valve-Airmax |
| 1434 | Pneumatic Air Cylinder-Festo |
| 1435 | Pneumatic Air Cylinder-Airmax |
| 1436 | Pneumatic Air Cylinder-Datta |
| 1437 | Pneumatic Connector-Festo |
| 1438 | Pneumatic Connector-Akari |
| 1439 | Pneumatic Connector-Airmax |
| 1440 | Pneumatic Jointer-Festo |
| 1441 | Pneumatic Jointer-Akari |
| 1442 | Pneumatic Jointer-Airmax |
| 1443 | Pneumatic Air Valve Seting T-Festo 6,8,10,12 mm |
| 1444 | Pneumatic Air Valve Seting T-Akari6,8,10,12 mm |
| 1445 | Pneumatic Air Valve Seting T-Airmax6,8,10,12 mm |
| 1446 | Pneumatic Elbow-Festo6,8,10,12 mm |
| 1447 | Pneumatic Elbow-Akari6,8,10,12 mm |
| 1448 | Pneumatic Elbow-Airmax6,8,10,12 mm |
| 1449 | Pneumatic FRL 1/2\" -Festo |
| 1450 | Pneumatic FRL 1/2\" - Airmax |
| 1451 | Soleniod Valve 5 Way - Airmax |
| 1452 | Soleniod Valve 5 Way - Festo |
| 1453 | Soleniod Valve 5 Way -Akari |
| 1454 | Reed Switch for Cylinder -Festo |
| 1455 | Reed Switch for Cylinder -Akari |
| 1456 | Reed Switch for Cylinder -Airmax |
| 1457 | Pneumatic Pipe -6,8,10,12 mm-Airmax |
| 1458 | Pneumatic Pipe -6,8,10,12 mm-Festo |
| 1459 | Pneumatic Pipe -6,8,10,12 mm - Akari |
| 1460 | Sprocket Chain ?2\" Simplex-Diamond |
| 1461 | Sprocket Chain ¾\" Simplex-Diamond |
| 1462 | Sprocket Chain 1\" Simplex-Diamond |
| 1463 | Sprocket Chain ?2\" Simplex-Rollon |
| 1464 | Sprocket Chain ¾\" Simplex-Rollon |
| 1465 | Sprocket Chain 1\" Simplex-Rollon |
| 1466 | Sprocket Chain ?2\" Duplex-Diamond |
| 1467 | Sprocket Chain ¾\" Duplex-Diamond |
| 1468 | Sprocket Chain 1\" Duplex-Diamond |
| 1469 | Sprocket Chain ?2\" Duplex-Rollon |
| 1470 | Sprocket Chain ¾\" Duplex-Rollon |
| 1471 | Sprocket Chain 1\" Duplex-Rollon |
| 1472 | Oil Seal-Voston Plus |
| 1473 | Electrical Item |
| 1474 | Contactors All Types 240/440 Volt -ABB |
| 1475 | Contactors All Types 240/440 Volt -L&T |
| 1476 | Contactors All Types 240/440 Volt -SIEMENS |
| 1477 | Spare Kits For Contactors-ABB |
| 1478 | Spare Kits For Contactors-L&T |
| 1479 | Spare Kits For Contactors-SIEMENS |
| 1480 | Coil For Contactors-L&T |
| 1481 | Coil For Contactors-SIEMENS |
| 1482 | Coil For Contactors-BCH |
| 1483 | MCCB All Ampier -ABB |
| 1484 | MCCB All Ampier -L&T |
| 1485 | MCCB All Ampier -SIEMENS |
| 1486 | MCB All Ampier-ABB |
| 1487 | MCB All Ampier -L&T |
| 1488 | MCB All Ampier-SIEMENS |
| 1489 | MPCB-ABB |
| 1490 | MPCB-L&T |
| 1491 | MPCB- SIEMENS |
| 1492 | Fuses-ABB |
| 1493 | Fuses-Havells |
| 1494 | Fuses-Siemens |
| 1495 | Fuses- L&T |
| 1496 | Fuse base-ABB |
| 1497 | Fuse base-Havells |
| 1498 | Fuse base-Siemens |
| 1499 | Fuse base- L&T |
| 1500 | Overload Relays-ABB |
| 1501 | Overload Relays-L&T |
| 1502 | Overload Relays-SIEMENS |
| 1503 | Overload Relays- BCH |
| 1504 | PVC Wire-HAVELLS |
| 1505 | PVC Wire-POLYCAB |
| 1506 | Electric Motor 3 Phase-SIEMENS |
| 1507 | Electric Motor 3 Phase-BHARAT BIJLI |
| 1508 | Electric Motor 3 Phase-ABB |
| 1509 | Gear Motor 3 Phase-ABB |
| 1510 | Gear Motor 3 Phase-SIEMENS |
| 1511 | Gear Motor 3 Phase-NEWBHARAT |
| 1512 | Gear Box with Motor 3 Phase-PBL |
| 1513 | Gear Box with Motor 3 Phase-SIEMENS |
| 1514 | Gear Box with Motor 3 Phase-ABB |
| 1515 | Gear Box with Motor 3 Phase-NEW BHARAT |
| 1516 | Gear Box with Motor-PBL |
| 1517 | Gear Box for all ratio - PBL, PBEGL, ELECON, NEW Bharat |
| 1518 | Multistrand Wires-Havells |
| 1519 | Multistrand Wires-KINGSWAY |
| 1520 | Multistrand Wires-KEI |
| 1521 | Multistrand Wires-VIMAL |
| 1522 | Aluminium Armoured Cables-KINGSWAY |
| 1523 | Aluminium Armoured Cables-Havells |
| 1524 | Aluminium Armoured Cables-KEI |
| 1525 | Copper Armoured Cables-Havells |
| 1526 | Copper Armoured Cables-KEI |
| 1527 | Copper Armoured Cables-KINGSWAY |
| 1528 | Drive ACS 550-01 08A8-4 - ABB |
| 1529 | Drive ACS 550-01 08A8-4 - Siemens |
| 1530 | Soft Starters-ABB |
| 1531 | Soft Starters-Havells |
| 1532 | Soft Starters-L&T |
| 1533 | Soft Starters-Siemens |
| 1534 | Soft Starters-Danfoss |
| 1535 | Push Button (On, Off) with Elecment (Red & Green Colour)-Teknic |
| 1536 | R,Y,B, Indicating Lamp (LED type) (240V AC, 22.5 sq.mm)-L & T |
| 1537 | Add-On Block (4 No, 2 No-2 NC, 1 No)-L & T |
| 1538 | Selec timer (230V AV, 50-60HZ 10VA Max)-L & T |
| 1539 | Limit Switch (24V DC)-L & T |
| 1540 | Limit Switch (24V DC)-Siemens |
| 1541 | Reed Switch(24V DC)-L & T |
| 1542 | Reed Switch(24V DC)-Siemens |
| 1543 | Proximity Sensor (HL,LL) (12-24V DC)-Dolfin |
| 1544 | CAPASITOR 2 KVR TO 25 KVR-ABB |
| 1545 | CAPASITOR 2 KVR TO 25 KVR-SIEMENS |
| 1546 | CAPASITOR 2 KVR TO 25 KVR-SUNIDER |
| 1547 | Air Cricuit Breaker 1000AMP-L & T |
| 1548 | Air Cricuit Breaker 1000AMP-Siemens |
| 1549 | Air Cricuit Breaker 1600AMP-L & T |
| 1550 | Air Cricuit Breaker 1600AMP-Siemens |
| 1551 | ON/ OFF Push Botton -L&T , ABB ,TC |
| 1552 | Ampere CT - All size |
| 1553 | Ampere Meter SQR Type - All Amp & Range |
| 1554 | Volt Meter Square Meter |
| 1555 | Control Cable Copper |
| 1556 | Heavy Duty Switch - All Amp |
| 1557 | Rate for Cattle Feed Plant, Pali (Mechanical Spare Part) |
| 1558 | Super Senior Pellet Mill (HEPL MAKE) |
| 1559 | Bearing Setting Ring (Forged Steel) |
| 1560 | Die Cover Ring (Forged Steel) |
| 1561 | Die Holder (Steel) (Forged Steel) |
| 1562 | Die Holder Assembly (Forged Steel) |
| 1563 | Pellet Mill Die 8 MM |
| 1564 | Pellet Mill Die 10 MM |
| 1565 | DieHolder Ring Rear Suitable For Above Alloy Steel |
| 1566 | Die Holder Ring Front (Forged Steel) |
| 1567 | Pellet Die Screber (Rear Scraper) (Forged Steel) |
| 1568 | Roll Holder Shaft (T Shaft) Assembly Steel |
| 1569 | Pellet Mill Sieve-5MM Hole 3MM Thick S.S. |
| 1570 | Teflon/Brash Bush For Main T Shaft |
| 1571 | Pellet Mill Dor Lock |
| 1572 | Pellet Capsule Knife S.S. |
| 1573 | Pellet Counter Pully 9\"x9 spc |
| 1574 | Pellet Counter Pully Shaft without Bearing & Plumber Block |
| 1575 | Shear Pin 18 MM |
| 1576 | Shear Pin Hold Ring Body |
| 1577 | Pellet Main Pully 9 SPC Group |
| 1578 | Pellet Capsule without Shaft Bearing |
| 1579 | Counctor Pulley Shaft 9\"Dia 70 MM, 85 MM Long |
| 1580 | Pellet Mill Blower Assembly M.S./S.S. |
| 1581 | Pellet Mill Blower Fan (IMPLER) |
| 1582 | Pellet Mill Blower Foundation |
| 1583 | Pellet Mill Blower Dumper |
| 1584 | Blower Cyclon M.S.4MM Thick/S.S. 3MM Thick |
| 1585 | Blower Cyclone Air Lock |
| 1586 | Blower Line S.S. |
| 1587 | Pellet Feeder Body M.S. |
| 1588 | Pellet Feeder Knife S.S |
| 1589 | Pellet Feeder Shaft S.S. |
| 1590 | Jumbo Extra wide Pellet Mill(HEPL MAKE) |
| 1591 | Bearing Setting Ring (Forged Steel) |
| 1592 | Die Cover Ring (Forged Steel) |
| 1593 | Die Holder (Steel) (Forged Steel) |
| 1594 | Die Holder Assembly (Forged Steel) |
| 1595 | Pellet Mill Die 8 MM |
| 1596 | Pellet Mill Die 10 MM |
| 1597 | DieHolder Ring Rear Suitable For Above Alloy Steel |
| 1598 | Die Holder Ring Front (Forged Steel) |
| 1599 | Pellet Die Screber (Rear Scraper) (Forged Steel) |
| 1600 | Roll Holder Shaft (T Shaft) Assembly Steel |
| 1601 | Pellet Mill Sieve-5MM Hole 3MM Thick S.S. |
| 1602 | Teflon/Brash Bush For Main T Shaft |
| 1603 | Pellet Mill Dor Lock |
| 1604 | Pellet Capsule Knife S.S. |
| 1605 | Pellet Counter Pully 9\"x9 spc |
| 1606 | Pellet Counter Pully Shaft without Bearing & Plumber Block |
| 1607 | Shear Pin 18 MM |
| 1608 | Shear Pin Hold Ring Body |
| 1609 | Pellet Main Pully 9 SPC Group |
| 1610 | Pellet Capsule without Shaft Bearing |
| 1611 | Counctor Pulley Shaft 9\"Dia 70 MM, 85 MM Long |
| 1612 | Pellet Mill Blower Assembly M.S./S.S. |
| 1613 | Pellet Mill Blower Fan (IMPLER) |
| 1614 | Pellet Mill Blower Foundation |
| 1615 | Pellet Mill Blower Dumper |
| 1616 | Blower Cyclon M.S.4MM Thick/S.S. 3MM Thick |
| 1617 | Blower Cyclone Air Lock |
| 1618 | Blower Line S.S. |
| 1619 | Pellet Feeder Body M.S. |
| 1620 | Pellet Feeder Knife S.S |
| 1621 | Pellet Feeder Shaft S.S. |
| 1622 | Press Roll Assembly Super Senior (HEPL MAKE) |
| 1623 | Bearing Retainer/Nut For Accentic Shaft |
| 1624 | Center Bolt/Rollar Stud (Allen Bolt Head Type Design) |
| 1625 | Lock Nut with Lock Washer For Press Roll Accentic Shaft |
| 1626 | Lock Washer |
| 1627 | Nut For Center Bolt (Lighting Ring) |
| 1628 | Spacer (Sealing Ring) |
| 1629 | Bearing Cover |
| 1630 | Clamping Device Tension Ring |
| 1631 | Distance Ring |
| 1632 | Accentic Shaft Press Roll |
| 1633 | Press Roll Shell Complete |
| 1634 | Setting Ring |
| 1635 | Press Roll Shell |
| 1636 | Press Roll Assembly Jumbo Extra wide(HEPL MAKE) |
| 1637 | Bearing Retainer/Nut For Accentic Shaft |
| 1638 | Center Bolt/Rollar Stud (Allen Bolt Head Type Design) |
| 1639 | Lock Nut with Lock Washer For Press Roll Accentic Shaft |
| 1640 | Lock Washer |
| 1641 | Nut For Center Bolt (Lighting Ring) |
| 1642 | Spacer (Sealing Ring) |
| 1643 | Bearing Cover |
| 1644 | Clamping Device Tension Ring |
| 1645 | Distance Ring |
| 1646 | Accentic Shaft Press Roll |
| 1647 | Press Roll Shell Complete |
| 1648 | Setting Ring |
| 1649 | Press Roll Shell |
| 1650 | Screw Conveyor (HEPL MAKE) |
| 1651 | Gravity Pipe Clamping For Above Pipe 8\" Dia |
| 1652 | Gravity Pipe M.S. 8\" Dia |
| 1653 | Gravity Pipe S.S. 8\" Dia |
| 1654 | Shaft Suitable For Joining the Screw Conveyor |
| 1655 | Chain Sprocket |
| 1656 | Sprocket 20 teeth 1” pitch Duplex (Bore 63mm,56mm and 50mm 16x6 mm Keyway) |
| 1657 | Sprocket 30 teeth 1” pitch Duplex (Bore 84mm, 16x5mm key Way) |
| 1658 | Sprocket 19 teeth 1” simplex (Bore 55mm 10x5 key Way) |
| 1659 | Sprocket 16 teeth 1’’ simplex (Bore 45mm,32mm,30mm 10x5 key Way) |
| 1660 | Sprocket 25 teeth 1” Pitch Simplex (Bore 45mm, 10x5 key way) |
| 1661 | Sprocket 10 teeth 1” Pitch Simplex (Bore 38mm, 10x4 key way ) |
| 1662 | Sprocket 25 teeth 1” Pitch Simplex (Bore 45mm, 10x5 key way) |
| 1663 | Sprocket 20 teeth 1” Pitch Simplex (Bore 48mm, 14x5.5 key way) |
| 1664 | Sprocket 40 teeth 1” Pitch Simplex (Bore 60mm, 14x5.5 key way) |
| 1665 | Sprocket 40 teeth 1” Pitch (Duplex) (Bore 60mm, 16x8 key way) |
| 1666 | Sprocket 9 teeth for Reddler type chain (20x10 deep,Bore 75mm,Keyway 30mm thick) |
| 1667 | Chain conveyor 385 MM (HEPL MAKE) |
| 1668 | Reddlar Chain 385MM Heavy |
| 1669 | Reddlar Head Sprocket (9 TEETH75MM BORE / 20X10 MM DEEP K/W 30MM THICK) |
| 1670 | Reddlar Head Sprocket (75MM BORE / 20X10 MM DEEP K/W 30MM THICK PLAIN) |
| 1671 | Reddlar Head Sprcket Shaft |
| 1672 | Reddlar Tail Sprocket Shaft |
| 1673 | 385 MM Chain conveyor COLUM |
| 1674 | 385 MM Chain conveyor FRONT HEAD |
| 1675 | 385 MM Chain conveyor BACK HEAD |
| 1676 | Chain conveyor 185 MM(HEPL MAKE) |
| 1677 | Reddlar Chain 185MM Heavy |
| 1678 | Reddlar Head Sprocket Shaft |
| 1679 | Reddlar Reader Tail Sprocket Shaft |
| 1680 | 185 MM Chain Conveyor FRONT HEAD BOX |
| 1681 | 185 MM Chain ConveyorBACK HEAD BOX |
| 1682 | 185 MM Chain Conveyor inside Reling Taplon (PVC) |
| 1683 | 185 MM Reling Side Sport |
| 1684 | 185 MM Chain Center Roller |
| 1685 | 185 MM Chain Lock Set |
| 1686 | 385 MM Chain Conveyor Inside Reling Taplon (PVC) |
| 1687 | 385 MM Reling Side Sport |
| 1688 | 385 MM Chain Center Roller |
| 1689 | 385 MM Chain Lock Set |
| 1690 | Elevator (HEPL MAKE) |
| 1691 | Elevator 12\" Top/Bottom Assembly |
| 1692 | Elecator 12\" Collom (BOX, STD 425X360 MM L BEND (RISHI LASER) |
| 1693 | Elevator 12\" Back Stoper |
| 1694 | Elevator 12\" Bucket 12\"X6\"x5\" PRE DRILLED 3 HOLE ATMMP) |
| 1695 | Elevator 12\" Belt PRE DRILLED 3 HOLE |
| 1696 | Elevator 12\" Bucket Nut/Bolt with Washer All Size |
| 1697 | Flat Belt Conveyor Roler Through Dia 40MM X 750 MM Long |
| 1698 | Elevator 12\" Top Pulley |
| 1699 | Elevator 12\" Bottom Pulley |
| 1700 | Elevator 12\" Top & Bottom Pulley Shaft without Bearing & Pedestal |
| 1701 | 12\" Elevator Magnet Hump |
| 1702 | Two Way Flamp Pnumatic 10\" |
| 1703 | Slide Gate Menul-400X600 |
| 1704 | Slide Gate Menul-400X600 |
| 1705 | Screw Compresser with Dryer, CPM10D,7KG./SQCMG. |
| 1706 | Hammer Mill Spare(HEPL MAKE) |
| 1707 | Beater (Flat Type) All Equal Weight Ni Hard Dynamically Balanced |
| 1708 | Beater Holding Bush |
| 1709 | Bush Rod Sieve 3MM Thick 5MM Hole |
| 1710 | Road Lock Megnatic |
| 1711 | Main Gate Lock |
| 1712 | Hammer Mill Rotor Assembly without Bearing & Plumber Block |
| 1713 | Hammer Mill Rottor Shaft |
| 1714 | Hammer Mill Foundation Dumper |
| 1715 | Hammer Mill Rotary Feeder Rotar |
| 1716 | Hammer Mill Rotary Feeder Rotar Shaft |
| 1717 | Hammer Mill Sieve-5MM Hole, 3 MM Thick M.S |
| 1718 | Hammer Mill Sieve Lock |
| 1719 | Hammer Mill Bush OD-30, ID-20, L-11.5mm |
| 1720 | Hammer Mill Rod Dia 19x606mm Length |
| 1721 | Hammer Mill Beater Set (68 Pieces) 140x5x6mm |
| 1722 | Hammer Mill Sieve Set 830x660x3mm thick 6/8mm perforated |
| 1723 | BOILER 1 TON(HEAT MAX MAKE) |
| 1724 | Safety Valve ½” |
| 1725 | Oil Presser Pump |
| 1726 | Leed Plug (FUSIBLE PLUG) 20/25 mm |
| 1727 | Blower Body 2 H.P. Motor |
| 1728 | Fire Gun Set (BURNER ASSEMBLY) |
| 1729 | Nozel 70 KG. |
| 1730 | Magnet Coil(FOR BURNER) 240/440 VOLT |
| 1731 | Bearing and General Item |
| 1732 | V\" Belts-Fenner |
| 1733 | V\" Belts-Polycon |
| 1734 | V\" Belts-SKF |
| 1735 | V\" Belts-PIX |
| 1736 | V\" Belts-Dunlop |
| 1737 | V\" Belts-Apollo |
| 1738 | V\" Belts-Rolax |
| 1739 | Tyre Coupling Complete-Fenner |
| 1740 | Tyre Coupling Complete-HIC |
| 1741 | Tyre Coupling Complete-Octaforce |
| 1742 | Tyre Coupling Complete-Unique |
| 1743 | Tyre For Tyre Coupling-Fenner |
| 1744 | Tyre For Tyre Coupling-HIC |
| 1745 | Tyre For Tyre Coupling-Octaforce |
| 1746 | Tyre For Tyre Coupling-Unique |
| 1747 | Bush type/Tyre Couplings Complete Set-Unique |
| 1748 | Bush type/Tyre Couplings Complete Set-Fenner |
| 1749 | Rubber lovejoy Coupling-Spider |
| 1750 | Welding Electrodes-Anand |
| 1751 | Welding Electrodes-Moon-Arc |
| 1752 | Welding Electrodes-NOVA |
| 1753 | Welding Electrodes-Stone Bridge |
| 1754 | Welding Electrodes-Hobart |
| 1755 | S.S.Welding Electrodes-Anand |
| 1756 | Steam Valves-Sant |
| 1757 | Steam Valves-Leader |
| 1758 | Bearing-KOYO |
| 1759 | Bearing-NTN JAPAN |
| 1760 | Bearing-FAG |
| 1761 | Bearing-SKF |
| 1762 | Bearing-NBC |
| 1763 | Bearing-ZKL |
| 1764 | Bearing-JMC |
| 1765 | Bearing-URB |
| 1766 | Bearing Sleeve-HKG |
| 1767 | Bearing Sleeve-NHB |
| 1768 | Bearing Sleeve-HFK |
| 1769 | Bearing Sleeve-JMC |
| 1770 | Bearing Sleeve-GMR |
| 1771 | Pedestal for Bearings-JNP |
| 1772 | Pedestal for Bearings-JNZ |
| 1773 | Pedestal for Bearings-JMC |
| 1774 | Pedestal for Bearings-GMR |
| 1775 | Bearing Housing-NTN JAPAN |
| 1776 | Soleniod Valve with Coil-Airmax |
| 1777 | Soleniod Valve with Coil-Festo |
| 1778 | Soleniod Valve with Coil-Janatics |
| 1779 | Soleniod Valve with Coil-Datta |
| 1780 | Soleniod Valve with Coil-Akari |
| 1781 | Soleniod Valve Filter-Airmax |
| 1782 | Soleniod Valve Filter-Akari |
| 1783 | Seal Kit for Solenniod Valve-Airmax |
| 1784 | Pneumatic Air Cylinder-Festo |
| 1785 | Pneumatic Air Cylinder-Airmax |
| 1786 | Pneumatic Air Cylinder-Datta |
| 1787 | Pneumatic Connector-Festo |
| 1788 | Pneumatic Connector-Akari |
| 1789 | Pneumatic Connector-Airmax |
| 1790 | Pneumatic Jointer-Festo |
| 1791 | Pneumatic Jointer-Akari |
| 1792 | Pneumatic Jointer-Airmax |
| 1793 | Pneumatic Air Valve Seting T-Festo |
| 1794 | Pneumatic Air Valve Seting T-Akari |
| 1795 | Pneumatic Air Valve Seting T-Airmax |
| 1796 | Pneumatic Elbow-Festo |
| 1797 | Pneumatic Elbow-Akari |
| 1798 | Pneumatic Elbow-Airmax |
| 1799 | Sprocket Chain ?2\" Simplex-Diamond |
| 1800 | Sprocket Chain ¾\" Simplex-Diamond |
| 1801 | Sprocket Chain 1\" Simplex-Diamond |
| 1802 | Sprocket Chain ?2\" Simplex-Rollon |
| 1803 | Sprocket Chain ¾\" Simplex-Rollon |
| 1804 | Sprocket Chain 1\" Simplex-Rollon |
| 1805 | Sprocket Chain ?2\" Duplex-Diamond |
| 1806 | Sprocket Chain ¾\" Duplex-Diamond |
| 1807 | Sprocket Chain 1\" Duplex-Diamond |
| 1808 | Sprocket Chain ?2\" Duplex-Rollon |
| 1809 | Sprocket Chain ¾\" Duplex-Rollon |
| 1810 | Sprocket Chain 1\" Duplex-Rollon |
| 1811 | Oil Seal-Voston Plus |
| 1812 | Electrical Item |
| 1813 | Contactors All Types-ABB |
| 1814 | Contactors All Types-Havells |
| 1815 | Contactors All Types-L&T |
| 1816 | Contactors All Types-SIEMENS |
| 1817 | Contactors All Types- BCH |
| 1818 | Spare Kits For Contactors-ABB |
| 1819 | Spare Kits For Contactors-Havells |
| 1820 | Spare Kits For Contactors-L&T |
| 1821 | Spare Kits For Contactors-SIEMENS |
| 1822 | Spare Kits For Contactors-BCH |
| 1823 | Coil For Contactors-L&T |
| 1824 | Coil For Contactors-SIEMENS |
| 1825 | Coil For Contactors-BCH |
| 1826 | MCCB-ABB |
| 1827 | MCCB-Havells |
| 1828 | MCCB-L&T |
| 1829 | MCCB-SIEMENS |
| 1830 | MCCB-BCH |
| 1831 | MCB-ABB |
| 1832 | MCB-Havells |
| 1833 | MCB-L&T |
| 1834 | MCB-SIEMENS |
| 1835 | MCB-BCH |
| 1836 | MPCB-ABB |
| 1837 | MPCB-L&T |
| 1838 | MPCB- SIEMENS |
| 1839 | MPCB-BCH |
| 1840 | Fuses-ABB |
| 1841 | Fuses-Havells |
| 1842 | Fuses-Siemens |
| 1843 | Fuses- L&T |
| 1844 | Fuse base-ABB |
| 1845 | Fuse base-Havells |
| 1846 | Fuse base-Siemens |
| 1847 | Fuse base- L&T |
| 1848 | Overload Relays-ABB |
| 1849 | Overload Relays-L&T |
| 1850 | Overload Relays-SIEMENS |
| 1851 | Overload Relays- BCH |
| 1852 | PVC Wire-HAVELLS |
| 1853 | PVC Wire-POLYCAB |
| 1854 | Electric Motor 3 Phase-SIEMENS |
| 1855 | Electric Motor 3 Phase-BHARAT BIJLI |
| 1856 | Electric Motor 3 Phase-ABB |
| 1857 | Gear Motor 3 Phase-PBL |
| 1858 | Gear Motor 3 Phase-SIEMENS |
| 1859 | Gear Motor 3 Phase-ELECON |
| 1860 | Gear Motor 3 Phase-NEWBHARAT |
| 1861 | Gear Box with Motor 3 Phase-PBL |
| 1862 | Gear Box with Motor 3 Phase-SIEMENS |
| 1863 | Gear Box with Motor 3 Phase-ELECON |
| 1864 | Gear Box with Motor 3 Phase-NEW BHARAT |
| 1865 | Gear Box with Motor-PBL |
| 1866 | Multistrand Wires-ABB |
| 1867 | Multistrand Wires-Siemens |
| 1868 | Multistrand Wires-Havells |
| 1869 | Multistrand Wires-L&T |
| 1870 | Multistrand Wires-KINGSWAY |
| 1871 | Multistrand Wires-KEI |
| 1872 | Multistrand Wires-VIMAL |
| 1873 | Aluminium Armoured Cables-KINGSWAY |
| 1874 | Aluminium Armoured Cables-ABB |
| 1875 | Aluminium Armoured Cables-Siemens |
| 1876 | Aluminium Armoured Cables-Havells |
| 1877 | Aluminium Armoured Cables-L&T |
| 1878 | Aluminium Armoured Cables-KEI |
| 1879 | Copper Armoured Cables-Havells |
| 1880 | Copper Armoured Cables-L&T |
| 1881 | Copper Armoured Cables-KEI |
| 1882 | Copper Armoured Cables-KINGSWAY |
| 1883 | Soft Starters-ABB |
| 1884 | Soft Starters-Havells |
| 1885 | Soft Starters-L&T |
| 1886 | Soft Starters-Siemens |
| 1887 | Soft Starters-Danfoss |
| 1888 | Push Button (On, Off) with Elecment (Red & Green Colour)-Teknic |
| 1889 | R,Y,B, Indicating Lamp (LED type) (240V AC, 22.5 sq.mm)-L & T |
| 1890 | Add-On Block (4 No, 2 No-2 NC, 1 No)-L & T |
| 1891 | Selec timer (230V AV, 50-60HZ 10VA Max)-L & T |
| 1892 | Limit Switch (24V DC)-L & T |
| 1893 | Limit Switch (24V DC)-Siemens |
| 1894 | Reed Switch(24V DC)-L & T |
| 1895 | Reed Switch(24V DC)-Siemens |
| 1896 | Proximity Sensor (HL,LL) (12-24V DC)-Dolfin |
| 1897 | CAPASITOR 2 KVR TO 25 KVR-ABB |
| 1898 | CAPASITOR 2 KVR TO 25 KVR-SIEMENS |
| 1899 | CAPASITOR 2 KVR TO 25 KVR-SUNIDER |
| 1900 | Air Cricuit Breaker 1000AMP-L & T |
| 1901 | Air Cricuit Breaker 1000AMP-Siemens |
| 1902 | Air Cricuit Breaker 1600AMP-L & T |
| 1903 | Air Cricuit Breaker 1600AMP-Siemens |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail