Construction Of Bus Stand At Junagarh, Dist-Kalahandi.
Tender Value
1 Crore
Estimated cost
Bid Submission
11 Apr 2022
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
junagarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bus Stand At Junagarh, Dist-Kalahandi.
BOQ
| Sl. No. | Item Description |
| 1 | MAIN BUILDING |
| 2 | Earth Work in hard soil or gravelly soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth. |
| 3 | Providing Anti-termite treatement to foundation trench and inside of floor including labour and materials etc, complete. |
| 4 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 5 | Providing and Layingplaincement concrete 1: 4: 8 .( 1 cement: 4 sand : 8 stone Aggregate 40mm nominal size ) As levellingcourse infoundation and plinthetc. complete all depth and height. |
| 6 | F.A brick masonary work in cement mortar (1:6) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN FOUNDATION & PLINTH |
| 7 | F.A brick masonary work in cement mortar (1:6) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN SUPERSTRUCTURE. |
| 8 | GROUND FLOOR |
| 9 | FIRST FLOOR |
| 10 | F.A brick masonary work in cement mortar (1:4) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN SUPERSTRUCTURE. |
| 11 | GROUND FLOOR |
| 12 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) anddirection of Engineer-in-charge. |
| 13 | GROUND FLOOR |
| 14 | FIRST FLOOR |
| 15 | Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc. |
| 16 | GROUND FLOOR |
| 17 | FIRST FLOOR |
| 18 | Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing. |
| 19 | GROUND FLOOR |
| 20 | Rigid and smooth centering and shuttering of RCC works including false worksof Lintels including removal of form work at all depth and heights. |
| 21 | GROUND FLOOR |
| 22 | Rigid and smooth centering and shuttering of RCC works including false works griders,beams,column including removal of form work at all depth and heights. |
| 23 | GROUND FLOOR |
| 24 | FIRST FLOOR |
| 25 | Rigid and smooth centering and shuttering of RCC works including false works roof slabs,Landing, balconies, projecting sun shades and chajja etc including dismantling them after casting including cost of materials etc complete. |
| 26 | GROUND FLOOR |
| 27 | Rigid and smooth centering and shuttering of RCC works including false works of RCC walls and fins etc including removal of form work at all depth and heights. |
| 28 | GROUND FLOOR |
| 29 | 16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height. |
| 30 | GROUND FLOOR |
| 31 | FIRST FLOOR |
| 32 | 6mm thick cement plaster in cement mortar 1:4 to RCC surfaces finished smooth including closed deep chiping and slurry treatment with necessary scaffolding, curring etc all complete. |
| 33 | GROUND FLOOR |
| 34 | FIRST FLOOR |
| 35 | 12mm cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. All complete at all depth height for out side portion wall. |
| 36 | GROUND FLOOR |
| 37 | FIRST FLOOR |
| 38 | Providing and applying priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete. |
| 39 | GROUND FLOOR |
| 40 | FIRST FLOOR |
| 41 | Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. (ASIAN (ULTIMA) / BURGER (Anti Dust) / and DULUX (Weather Shield).[NSWI] |
| 42 | GROUND FLOOR |
| 43 | FIRST FLOOR |
| 44 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.(N.S.W.I) |
| 45 | GROUND FLOOR |
| 46 | Wall painting two coats with plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application.(ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). [NSWI] |
| 47 | GROUND FLOOR |
| 48 | Supplying, fitting and fixing of M.S grills, M.S angles including cost of labour materials transportation etc.complete. |
| 49 | GROUND FLOOR |
| 50 | Enamel painting two coats with cost of all material, labour, T&P etc complete. |
| 51 | GROUND FLOOR |
| 52 | One coat of priming with approved primer over new wood work. with cost of all material, labour, T&P etc complete. |
| 53 | GROUND FLOOR |
| 54 | Supplying, Fitting & Fixing of 10 mm thick Digital glazed Vitrified Tile in floor of size 600mm x 600mm of approved shade laid on leveled CC Course with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. (Tiles must be SOMANY, KAJURIA, NITCO, VARMORA and RAK). Per Sqm. |
| 55 | GROUND FLOOR |
| 56 | Providing, Fixing & Fitting Anti-skid CERAMIC floor tiles of 9mm thick of size 300mm x 300mm laid over 25mm Cement mortar (1:1) laid in proper slope and filling joints with epoxy grout (2mm) including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect as per the direction of the Engineer-in-charge. (SOMANY, KAJARIA, NITCO, VARMORA & RAK). Per Sqm. |
| 57 | GROUND FLOOR |
| 58 | Providing, Fixing & Fitting Ceramic glazed tiles on wall of size 300mmx450mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect as directed by the Engineer-in-charge. (SOMANY, KAJARIA, NITCO, VARMORA & RAK). Per Sqm. |
| 59 | GROUND FLOOR |
| 60 | Supplying, fitting and fixing of Industrial chequertileon 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete. |
| 61 | GROUND FLOOR |
| 62 | Drip course mould plaster 1:4 including necessary scaffolding curing etc complete at all depth and height as per direction of site in charge. |
| 63 | GROUND FLOOR |
| 64 | Supplying,fitting & fixing of 4\"dia U.P.V.C. rain waterpipe with necessary fittings and all complete. |
| 65 | GROUND FLOOR |
| 66 | Supplying,fitting and fixing of F.R.P. door with frame including cost of all materials labour T & P taxes etc ,complete. |
| 67 | GROUND FLOOR |
| 68 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost of labour, material, T&P etc. all complete. |
| 69 | GROUND FLOOR |
| 70 | Providing ,Fitting and Fixing of khondalite tile in wall on 12mm thick cement plaster 1:3 jointed with neat cement slurry mixed with pigments to match the shade of the tile in all complete. |
| 71 | GROUND FLOOR |
| 72 | MARKET COMPLEX |
| 73 | Earth Work in hard soil or gravelly soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth. |
| 74 | Providing Anti-termite treatement to foundation trench and inside of floor including labour and materials etc, complete. |
| 75 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 76 | Providing and Layingplaincement concrete 1: 4: 8 .( 1 cement: 4 sand : 8 stone Aggregate 40mm nominal size ) As levellingcourse infoundation and plinthetc. complete all depth and height. |
| 77 | F.A brick masonary work in cement mortar (1:6) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN FOUNDATION & PLINTH |
| 78 | F.A brick masonary work in cement mortar (1:6) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN SUPERSTRUCTURE. |
| 79 | GROUND FLOOR |
| 80 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) anddirection of Engineer-in-charge. |
| 81 | GROUND FLOOR |
| 82 | Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc. |
| 83 | GROUND FLOOR |
| 84 | Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing. |
| 85 | GROUND FLOOR |
| 86 | Rigid and smooth centering and shuttering of RCC works including false worksof Lintels including removal of form work at all depth and heights. |
| 87 | GROUND FLOOR |
| 88 | Rigid and smooth centering and shuttering of RCC works including false works griders,beams,column including removal of form work at all depth and heights. |
| 89 | GROUND FLOOR |
| 90 | Rigid and smooth centering and shuttering of RCC works including false works roof slabs,Landing, balconies, projecting sun shades and chajja etc including dismantling them after casting including cost of materials etc complete. |
| 91 | GROUND FLOOR |
| 92 | Rigid and smooth centering and shuttering of RCC works including false works of RCC walls and fins etc including removal of form work at all depth and heights. |
| 93 | GROUND FLOOR |
| 94 | 16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height. |
| 95 | GROUND FLOOR |
| 96 | 6mm thick cement plaster in cement mortar 1:4 to RCC surfaces finished smooth including closed deep chiping and slurry treatment with necessary scaffolding, curring etc all complete. |
| 97 | GROUND FLOOR |
| 98 | 12mm cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. All complete at all depth height for out side portion wall. |
| 99 | GROUND FLOOR |
| 100 | Providing and applying priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete. |
| 101 | GROUND FLOOR |
| 102 | Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. (ASIAN (ULTIMA) / BURGER (Anti Dust) / and DULUX (Weather Shield).[NSWI] |
| 103 | GROUND FLOOR |
| 104 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.(N.S.W.I) |
| 105 | GROUND FLOOR |
| 106 | Wall painting two coats with plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application.(ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). [NSWI] |
| 107 | GROUND FLOOR |
| 108 | Supplying, fitting and fixing of M.S grills, M.S angles including cost of labour materials transportation etc.complete. |
| 109 | GROUND FLOOR |
| 110 | Enamel painting two coats with cost of all material, labour, T&P etc complete. |
| 111 | GROUND FLOOR |
| 112 | One coat of priming with approved primer over new wood work. with cost of all material, labour, T&P etc complete. |
| 113 | GROUND FLOOR |
| 114 | Supplying, Fitting & Fixing of 10 mm thick Digital glazed Vitrified Tile in floor of size 600mm x 600mm of approved shade laid on leveled CC Course with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. (Tiles must be SOMANY, KAJURIA, NITCO, VARMORA and RAK). Per Sqm. |
| 115 | GROUND FLOOR |
| 116 | Supplying, fitting and fixing of Industrial chequertileon 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete. |
| 117 | GROUND FLOOR |
| 118 | Drip course mould plaster 1:4 including necessary scaffolding curing etc complete at all depth and height as per direction of site in charge. |
| 119 | GROUND FLOOR |
| 120 | Supplying,fitting & fixing of 4\"dia U.P.V.C. rain waterpipe with necessary fittings and all complete. |
| 121 | GROUND FLOOR |
| 122 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost of labour, material, T&P etc. all complete. |
| 123 | GROUND FLOOR |
| 124 | SEPTIC TANK |
| 125 | Earth Work in ordinary soilwithin 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth. |
| 126 | GROUND FLOOR |
| 127 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 128 | GROUND FLOOR |
| 129 | Providing and Layingplaincement concrete 1: 4: 8 .( 1 cement: 4 sand : 8 stone Aggregate 40mm nominal size ) As levellingcourse infoundation and plinthetc. complete all depth and height. |
| 130 | GROUND FLOOR |
| 131 | F.A brick masonary work in cement mortar (1:6) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN FOUNDATION & PLINTH |
| 132 | GROUND FLOOR |
| 133 | F.A brick masonary work in cement mortar (1:4) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN FOUNDATION & PLINTH |
| 134 | GROUND FLOOR |
| 135 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) anddirection of Engineer-in-charge. |
| 136 | GROUND FLOOR |
| 137 | Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc. |
| 138 | GROUND FLOOR |
| 139 | Rigid and smooth centering and shuttering of RCC works including false works roof slabs,Landing, balconies, projecting sun shades and chajja etc including dismantling them after casting including cost of materials etc complete. |
| 140 | GROUND FLOOR |
| 141 | 16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height. |
| 142 | GROUND FLOOR |
| 143 | 25mm thick A.S.Flooring with cement concrete 1:2:4 including punning using 12mm.size hard granite chips with cost conveyance, royality, watering & curing etc. complete. |
| 144 | GROUND FLOOR |
| 145 | 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting.with cost conveyance, royality, watering & curing etc. complete. |
| 146 | GROUND FLOOR |
| 147 | Providing, fitting ,fixing of 4 cmsize K.B brick khoa with proper laying and compaction etc including cost ofall materials ,labour T& P etc complete. |
| 148 | GROUND FLOOR |
| 149 | INSPECTION CHAMBER |
| 150 | Earth Work in ordinary soilwithin 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth. |
| 151 | GROUND FLOOR |
| 152 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 153 | GROUND FLOOR |
| 154 | Providing and Layingplaincement concrete 1: 4: 8 .( 1 cement: 4 sand : 8 stone Aggregate 40mm nominal size ) As levellingcourse infoundation and plinthetc. complete all depth and height. |
| 155 | GROUND FLOOR |
| 156 | F.A brick masonary work in cement mortar (1:6) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.IN FOUNDATION & PLINTH |
| 157 | GROUND FLOOR |
| 158 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) anddirection of Engineer-in-charge. |
| 159 | GROUND FLOOR |
| 160 | Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc. |
| 161 | GROUND FLOOR |
| 162 | Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing. |
| 163 | GROUND FLOOR |
| 164 | 16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height. |
| 165 | GROUND FLOOR |
| 166 | 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting.with cost conveyance, royality, watering & curing etc. complete. |
| 167 | GROUND FLOOR |
| 168 | SITE DEVELOPMENT(DISMENTALLING) |
| 169 | Dismentalling of brick/stone masonary in cement motar including stacking theuseful materials for reuse and removing the debries with in 50 mtr lead. |
| 170 | GROUND FLOOR |
| 171 | Dismentaling of R.C.C. columns ,beams ,slab ,staircase,landing and lintels including stacking the useful materials for reuse within 50 mtr.lead. |
| 172 | GROUND FLOOR |
| 173 | AREA CONCRETING (CARRAIGE WAY) |
| 174 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 175 | GROUND FLOOR |
| 176 | Providing and Layingplaincement concrete 1: 4: 8 .( 1 cement: 4 sand : 8 stone Aggregate 40mm nominal size ) As levellingcourse infoundation and plinthetc. complete all depth and height. |
| 177 | GROUND FLOOR |
| 178 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) anddirection of Engineer-in-charge. |
| 179 | GROUND FLOOR |
| 180 | Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc. |
| 181 | GROUND FLOOR |
| 182 | Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing. |
| 183 | GROUND FLOOR |
| 184 | Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials,bitumen and cement proportion ( 3:1) including cleaning before pouring 12 mm to 25 mm and 15 cm depth. |
| 185 | GROUND FLOOR |
| 186 | AREA PAVING |
| 187 | Earth Work in ordinary soilwithin 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth. |
| 188 | GROUND FLOOR |
| 189 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 190 | GROUND FLOOR |
| 191 | Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge. |
| 192 | GROUND FLOOR |
| 193 | Providing and Layingat near ground level factory made kerb stone of M20 graded ( 450 x 300 x 150mm ) cement concrete in position to the required line,level and curveture,jointed with cement mortar 1:3 including making joints with or without groove(thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete etc. as per the direction of EIC.(Precast CC kerb stone shall be approved by EIC) |
| 194 | GROUND FLOOR |
| 195 | FURNITURE |
| 196 | CABIN TABLE WITH DISCUSSION TIP SIZE : 2400X900X750MM HT, SIDE TABLE: 1500X450X750,Table Top: 25mm Thick pre laminate particle board with 2mm PVC edge lipping on all exposed edges. Support:25mm thick pre laminated gable ends. Wiremanagement: 400mm alluminium flip up with metal cable tray with vertical wire entry.Office desk |
| 197 | Anatom Medium Back Chair, Mesh Back, With Headrest,Single lock Synchro Mechanism,Adjustable Lumber support, One Way Adjustable Arm(Height), Nylon Base-Executive Chair |
| 198 | Supplying, fitting and fixing of Stainless steel seating benches etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect-Steel 4 seater waiting chair |
| 199 | Providing & fixing of Wardrobe Sliding type of size (1800x600x2000) Kismo make : Maple. |
| 200 | LAND SCAPING |
| 201 | Surface dressing of the ground including removing Vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish lead upto 50m (at least 5m away from the dressed area). (Provisional) |
| 202 | Supplying and stacking & speareding of good earth at site including royalty and carrage up to 5 KM (earth measured in stacks will be reduced by 20% for payment) 300mm th. (Provisional) |
| 203 | Supplying and stacking sludge at site including royalty and carrage up to 5 KM (sludge measured in stacks will be reduced by 8% for payment). (Provisional) |
| 204 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation, breaking clods and fine dressing the ground including all materials and labour complete as per direction of Engineer-In-Charge. (Provisional) |
| 205 | Provision of soft surfaces such as grass lawns in between the open spaces. (Provisional) |
| 206 | Planting of Ornamental spp (30\"x30\", 6\"x7\" Height Poly pack.) Digging pits removing all unserviceable materials and dumping outside the working area as shown by the engineer incharge .Supply and filling the same pits with good soil and well decomposed cow-dung manure mixture of ratio 4:1 and required quantites of fertilizer and pesticides and supply and planting with specified saplings as per the instruction of engineer in charge and taking up maintenance work like watring ,weeding apply of fertilizer, pesticides etc including cost of men, matrial , tools,tackles all complete. |
| 207 | Slow growing ornamental species. (Provision)(i.e. Asoka (sarca asoka), Baula (mimussops elengii), Bottle brush (callistemin lanceolatum), Neem (azadirchta indica), Karanj (pangamea pinnata), Debdaru (polyalthia longifolia), Aonla (embelica officinalis), Sunari (cassia fistula) & Kanchan (bauhinia variegate) |
| 208 | Shrub species (i-Local species).(Provision)(i.e. Mandar (hibiscus rosasinesis), Tagar (tabarnae montana coronaria) , Kaniar (thevetia spp), Karabira (nerium oleander) |
| 209 | Creepers/ Climbers/ Ground covers.(Provision)(i.e. Jui(jasminum offcinale), Jai (jasminum pubescence), Madhumalati (quuisquilis indica) |
| 210 | Supplying fitting fixing of UPVC (SCH-80) pipe including all cost. (Provision) |
| 211 | i) 25 mm dia |
| 212 | ii) 40 mm dia |
| 213 | Fitting Fixing of PVC Ball Valve. (Provision) |
| 214 | i) 25 mm dia |
| 215 | i) 40 mm dia |
| 216 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Provision) |
| 217 | 15mm dia CP Bib cock (Plaza/zigma/Amber/Delux Make) (Provision) |
| 218 | RCC DRAIN |
| 219 | Earth Work in ordinary soilwithin 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth. |
| 220 | GROUND FLOOR |
| 221 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C. |
| 222 | GROUND FLOOR |
| 223 | Providing and Layingplaincement concrete 1: 4: 8 .( 1 cement: 4 sand : 8 stone Aggregate 40mm nominal size ) As levellingcourse infoundation and plinthetc. complete all depth and height. |
| 224 | GROUND FLOOR |
| 225 | Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) anddirection of Engineer-in-charge. |
| 226 | GROUND FLOOR |
| 227 | Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc. |
| 228 | GROUND FLOOR |
| 229 | Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing. |
| 230 | GROUND FLOOR |
| 231 | 6mm thick cement plaster 1:4 overbrick work with cement punning for skirting.with cost conveyance, royality, watering & curing etc. complete. |
| 232 | GROUND FLOOR |
| 233 | INTERNAL P.H. |
| 234 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. |
| 235 | 40 mm dia Pipe (CPVC) |
| 236 | 25 mm dia Pipe (CPVC) |
| 237 | 20mm dia Pipe (CPVC) |
| 238 | 15 mm dia Pipe (CPVC) |
| 239 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 240 | 250 mm thick wall (10\") |
| 241 | Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof. |
| 242 | Detail cost per I hole of size (15cmX15cmX25cm) |
| 243 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 244 | Detail cost per 1 meter |
| 245 | Providing and fixing wall face Unplasticised rigid PVC soil,waste and rain water pipes conforming to IS : 13295,TYPE-Aincluding jointing with seal ring confirming IS: 5382,leaving 10 mm gap for theramal expansion, including testing as per specification etc. complete.110mm dia. rigid UPVC Single socket SWR Pipes |
| 246 | 110mm dia. rigid UPVC Single socket SWR Pipes |
| 247 | Providing and Laying in trenches UnplasticisedPVC pipes conforming to IS : 4985-2000 and specials of the following outside diameter for all classes, including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.110 mm dia. rigid UPVC Pipes,Class-3 (0.60 mpa). |
| 248 | 110 mm dia rigid UPVC pipe ,Class-3 (0.60 mpa) |
| 249 | Providing and Laying in trenches UnplasticisedPVC pipes conforming to IS : 4985-2000 and specials of the following outside diameter for all classes, including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.160 mm dia. rigid UPVC Pipes,Class-3 (0.60 mpa). |
| 250 | 160 mm dia rigid UPVC pipe ,Class-3 (0.60 mpa) |
| 251 | Fixingfloor traps of the following nominal diameter of outlet of self cleaning design withscrewed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification. |
| 252 | 110mm dia Inlet & Outlet floor traps PVC SWR type |
| 253 | Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion . |
| 254 | 110 mm dia Single Junction with door PVC SWR type |
| 255 | Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion . |
| 256 | 110 mm dia Plain Bend PVC SWR type |
| 257 | Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion . |
| 258 | 110 mm dia Cowel PVC SWR type |
| 259 | Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion . |
| 260 | 110 mm dia Bend with door PVC SWR type |
| 261 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to JAQUAR MAKE of brand code CNS-WHT-553SN and of viteros china make seat cover fixing to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. ( With Seat and cover) (White Vitreous china wash down water closet E.W.C) |
| 262 | Water closet European type W.C pan with seat cover (JAQUAR MAKE) |
| 263 | Providing and fixing controlled flush, low level cistern made of vitreous china conforming toCNS-WHT-353 N / 353 S / 755 ( JAQUAR MAKE ) with all fittings and fixtures complete. |
| 264 | Cistern 10 Ltr capacity , CNS-WHT-353N/353S/755 (JAQUAR MAKE) |
| 265 | Fixing Wash Basins with hole for pillar taps conforming to IS 2556 : Part 4-2004/ JAQUAR MAKE with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. ( Vitreous china flat back Wash Basin 550 x 400 x 200 mm ( CNS-WHT-801- JAQUAR MAKE ) |
| 266 | Vitreous china flat back wash basin 550 x 400 x 200 mm (CNS-WHT-801-JAQUAR MAKE) |
| 267 | Fixing of U.P.V.C Ball Valve of 25 mm diameter conforming to the following nominal sizes with wheel as per specification complete.(solvent welded with metal ball)as per the direction of EIC. |
| 268 | 25 mm dia U.P.V.C Ball Valve |
| 269 | Fixing of U.P.V.C Ball Valve of 40 mm diameter conforming to the following nominal sizes with wheel as per specification complete.(solvent welded with metal ball)as per the direction of EIC. |
| 270 | 40 mm dia U.P.V.C Ball Valve |
| 271 | Fixing of Brass Screw-down Two way Short Body Bib Cocks ( Taps ) polished bright conforming to ( JAQUAR MAKE ) with CP flange and CP extension piece ofthe following nominal sizes as per specificationcomplete. (Delux Head& highquality) ( CON-041KN-JAQUAR MAKE) |
| 272 | 15mm dia Two way Short body bib cock (CON-041KN-JAQUAR MAKE) |
| 273 | Fixing of Brass Screw-down Long Body Bib Cocks ( Taps ) polished bright conforming to ( JAQUAR MAKE ) with CP flange and CP extension piece ofthe following nominal sizes as per specificationcomplete. (Delux Head& highquality)(CODE CON-107KN-JAQUAR MAKE) |
| 274 | 15mm dia Long body bib cock (CON-107KN-JAQUAR MAKE) |
| 275 | Fixing of C.P Screw-down Angular Stop Cocks conforming to of the following nominal sizes as per specification complete. (Deluxe Head& high quality) (A.R-2013,SL NO-3.2.16) |
| 276 | 15mm dia C.P Angular cock |
| 277 | Fixing of Brass C.P Screw-down Consealed Stop Cocks conforming to of the following nominal sizes as per specification complete. (Deluxe Head& high quality) (A.R-2013,SL NO-3.2.16) |
| 278 | 15mm dia C.P Consealed Stop Cock |
| 279 | Fixing Chromium Plated BrassShower rose conforming to OHS-1985 (JAQUAR MAKE)including polishing all complete as per specification. (Deluxe Head & Heavy quality) |
| 280 | 15o mm dia 15 - 20 mm C.P Brass Shower rose(OHS-1985 - JAQUAR MAKE) |
| 281 | Fixing Chromium Plated Arm of 15mm or 20 mm inlet conforming to (Shower arm casted 190 mm long light body round shape for wall mounted showers with flange ( SHA - 477 - JAQUAR MAKE )including polishing all complete as per specification.(Deluxe Head &Heavy quality) |
| 282 | 15 mm x 225 mm long CP Shower arm (SHA - 477 - JAQUAR MAKE) |
| 283 | Fitting,Fixing of Health faucetconforming to ( Hand shower Health faucet ABS Body with 1.2 meter long PVC tube & wall hook (ALD-IVY-583 and ALD-BLK-583-JAQUAR MAKE)including polishing all complete as per specification. |
| 284 | Health Faucet ( ALD-IVY- 583 & ALD-BLK-583-JAQUAR MAKE ) |
| 285 | Fixing Chromium Plated Soap dish holder complete with Chromium Plated brass brackets fixed to P.V.C plugs with Chromium Plated brass screwsas per specification.(JAQUAR MAKE,BRAND ACN-1131N) |
| 286 | Soap dish holder(CAN-1131N-JAQUAR MAKE) |
| 287 | Fixing standard sized CP Glass-Shelf with Chromium Plated brass brackets and guard rails complete, fixed to wooden plugs with Chromium Plated brass screws as per specification.(600 mm long glass shelf-JAQUAR MAKE,BRAND ACN-1171N) |
| 288 | 600x120 mm Glass shelf (ACN-1171N-JAQUAR ) |
| 289 | Fixing standard sized Towel rail of JAQUAR MAKE complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.(Single Towel rail 600mm long)(ACN-1111NM-JAQUAR)(Heavy quality) |
| 290 | CP Towel Rail ( ACN-1111 NM-JAQUAR ) |
| 291 | Fixing standard sized Chromium Plated brass towel ring of JAQUAR MAKE complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.(Round Towl Ring with round Flange)(ACN-1121 BN-JAQUAR) |
| 292 | CP Towel Ring (ACN-1121 BN-JAQUAR MAKE) |
| 293 | Fixing 600 mm x 450 mm Bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.(AR-2013,SL. NO.-3.4.26) |
| 294 | Bevelled edge mirrior |
| 295 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the E.I.C . |
| 296 | Double Layer Cylinderical Vertical water storage tanks |
| 297 | Supplying and installation of storage water cooler cum purifier on floor base having 3 syage advanced purification process (VU based both for cooling and purifying system).The storage tank capacity 80L,cooling capacity 60LPH,water flow rate 1.5 L,the body made up of ss304 and size 640X450X1350mm.MODEL-AG Green Pure Chill 80SS UV (HSN code-8418) (N.S.W.I) |
| 298 | COOLER CUM PURIFIER |
| 299 | EXTERNAL P.H. |
| 300 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of ownrigs with its accessories, tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well). |
| 301 | a) Labour for drilling |
| 302 | Cost of P.V.C (A S T M SCHEDULE-80)pipe 200 mm dia (ASTM D-1785) Make-Oriplast, Hariplast |
| 303 | a)P.V.C ASTM (SCHEDULE-80) PIPES |
| 304 | Lowering the 200mm dia size PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position,including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials,tools and plant etc.complete and keeping the top of the casing pipe threaded including plugging tubewells to prevent entry of foreign materials from above. |
| 305 | a)Lowering of 200mm dia P.V.C casing pipes |
| 306 | Cleaning and developing the 200mm dia tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 307 | a) By DTH/Rotary Rig |
| 308 | Submersible Pump Set with the cost of Motor |
| 309 | 1.5HP Single phase(32 Mtr. Head) Model (GP121507) |
| 310 | Control Panel Board (C&S) |
| 311 | Upto 3HP Single Phase |
| 312 | HDPE Pipes 32/40 mm ( High Density PVC pipes inner dia 32mm, outer dia 40mm, 6Kg/ Cm Sqr. With IS specification |
| 313 | a) Detail cost per 1 meter |
| 314 | Steel Rope with PVC coated 6mm |
| 315 | a) Detail cost per 1 meter |
| 316 | Finolex/L&T/BCH Cable 4 Sq. mm( 3core copper wire flat cablePVC insulation) |
| 317 | a) Detail cost per 1 meter |
| 318 | Accessories like Nipple, Bore cover,MS clamp, Nut Bolt,Stainless steel nipple, Short piece, GI bend, Socket etc. complete. |
| 319 | a) Detail cost per 1 Set |
| 320 | Installation Charges including transportation |
| 321 | a) Charge per 1 Set |
| 322 | INTERNAL ELECTRIFICATION |
| 323 | LT CABLE-Supply and laying of 1100 V grade, (XLPE/PVC) insulatedaluminium conductor, armouredpower cable as per specifications.The cables shall be laid in cable trenches or buried directly underground or on cable trays. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. The unit cost of the cable shall include clamps, fasteners, saddles, tags etc. as required for proper instllation. |
| 324 | 4C x 16 Sqmm, Al. cable |
| 325 | 4C x 6 Sqmm, Cu. cable |
| 326 | 3C x 6 Sqmm, Cu. cable |
| 327 | END TERMINATION-Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 328 | 4 x 16 sq.mm |
| 329 | 4 x 6 sq.mm(CU) |
| 330 | 3 x 6 sq.mm |
| 331 | DISTRIBUTION BOARDS-Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required. |
| 332 | 4WAY 7 SEGMENTTPNMCB DB. CONSIST OG 63A TPN MCBas a Incomer , 40A DB RCCB as a sub incomer (3 Nos) and also 12 Nos Sp MCb as a outgoing.for LDB + PDB |
| 333 | 8WAY (2+ 6) SPN DOUBLE DOOR |
| 334 | PERFORATED TYPE CABLE TRAY-Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays |
| 335 | Size of Cable Tray :150 mm x 50 mm |
| 336 | FITTINGD & FIXTURE-Supply Installation, testing and commissioning of thefollowing lighting luminaires including all necessary accessories like electronic driver, holder, control gear, fixing accessories, down rod, chain suspender, supporting arrangements, clamps, as per the site requirments. |
| 337 | Supply , installationtesting and commissioning of 20Watts LED tube wall mounted/Surface typelight fitting with all accessories as required. |
| 338 | Supply , installationtesting and commissioning of 10Watts LED surface mounted type light fitting with all accessories. |
| 339 | Supply , installationtesting and commissioning of 10Watts wall mounted LED bulb with all accessories as required. |
| 340 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge .(With fan Regulator) |
| 341 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Make-Havells/almonard/cromptron makeor any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. |
| 342 | SOCKETS |
| 343 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 6 /16 A modular socket outlet and 16 A modular switch, connections etc. as required. |
| 344 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 6A modular socket outlet and 6 A modular switch, connections etc. as required. |
| 345 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1nos of 6 pin 16A modular socket outlet controlled by 1no of 16 A modular switch, connections etc. as required.-(UPS) |
| 346 | CIRCUIT WIRING |
| 347 | 2 Runs of 2.5 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire with all necessary accessories as required.(lighting & small power) |
| 348 | 2 Runs of 4 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 2.5 sq.mm multi strand FRLS insulated copper earth wire with all necessary accessories as required.(Raw Power) |
| 349 | POINT WIRING |
| 350 | Point wiring of light, using 1100 volt grade, 2 Runs of 1.5 sqmm multi strand FRLS insulated copper conductor wire along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire, drawn in 19/20mm dia,2mm thick rigid FRLS PVC conduit in a concealed /open conduit system.The wiring shall be complete with all conduit and wiring accessories like deep junction boxes, collars, tees, bends, elbows, MS boxes, GI pull wires,clamps, spacers, screws, etc.The rate shall include providing mounting boxes with tapped holes for lights switches, moulded front plates with brass screwsearthing ofall points using third core of the cable,DB to switch control will be measured as circuit wiring.The switch boxes shall be flush mounted in brick wall.The point wiring shall be as per specification. Group B |
| 351 | Two light/fan/ex.fpoint controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-b |
| 352 | Three light/fan/ex.fpoint controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B |
| 353 | PVC PIPES |
| 354 | Supplying and fixing of 20mm FRLS PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 355 | Supplying and fixing of 25mm FRLSPVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 356 | UPS & INVERTER |
| 357 | Supply and Installation of 2KVAUPS with suitable batteries for 90 Mins battery backup |
| 358 | MISCELLENOUS ITEMS |
| 359 | Rubber matISI approved 2m x 1m |
| 360 | First aid kit( At Electrical Room) |
| 361 | SERVICE CHARGES |
| 362 | Arranging the required details from - duely making the formalities and arranging service of the installation with the projected charges and arranging required approval from the required government Electrical Inspectorate and permission for the energising the HT installation works. Also this item should include charges towards arranging temporary power supply for construction and making payments, monthly bills and renewal/upgrading temporary power supply. |
| 363 | EXTERNAL ELECTRIFICATION |
| 364 | LT CABLE-Supply and laying of 1100 V grade, (XLPE/PVC) insulatedaluminium conductor, armouredpower cable as per specifications.The cables shall be laid in cable trenches or buried directly underground or on cable trays. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. The unit cost of the cable shall include clamps, fasteners, saddles, tags etc. as required for proper instllation. |
| 365 | 3.5C x 70 Sqmm, Al. cable |
| 366 | END TERMINATION-Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 367 | 3.5C x 70 sq.mm |
| 368 | EARTHING |
| 369 | Supply, erection and testing of GI Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia. GI pipe, 600 x 600 x 6mm size GI plate and 1 run of 40 x 6mm GI flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (For body Earthing) |
| 370 | Supplying and laying 46 mm x 6 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
| 371 | Providing and fixing 8 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required |
| 372 | FITTINGS & FIXTURE |
| 373 | Supply Installation, testing and commissioning of thefollowing lighting luminaires including all necessary accessories like electronic driver, holder, control gear, fixing accessories, down rod, chain suspender, supporting arrangements, clamps, as per the site requirments. |
| 374 | Supply & installation of 80W LED Streetlight Luminaire with a nominal system lumen output of 8000 lumens and a minimum system efficacy of 100 lm/W. System wattage should not exceed 72W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 5700K and CRI of 70. Driver of the luminaire shall have PF>0.95. Product should be able to withstand surge protection up to 10 KV. The luminaire housing should be made of LM6 high pressure die cast Aluminium & toughened glass front cover. Product should be IP66 rated. Similar to Wipro make Skyline Neo \"LR07-981-XXX-57-XX\"(OR) EQUIVALENT MAKE. |
| 375 | Supply & installation of 9.0mtr height Octagonal poles with Mat Finish with foundation bolt and nut etc with smart pack terminal Box (Mounting inside the base compartment of power. The cost is inclusive of 5Mtrs 8SWG wire. Make :BAJAJ / VALMART/WIPRO/UTKARSH/CG |
| 376 | 1.5 mtrs Single cross Arm bracketsuitable to the above pole |
| 377 | MISCELLENOUS ITEMS |
| 378 | Supply and installation of HT/LT Danger board as required by the CEA/ CEIG authorities. |
| 379 | Supply and fixing of HT/LT cable route indicator (cast iron) made out of MS flat and angle iron |
| 380 | Shock treatment chart laminated( At Electrical room and LMR) |
| 381 | Providing and laying of 600mm (L) x 600mm (W) x 600mm (D)Inspection Chamberwith pre cast Cover and all necessary accessories as required |
| 382 | Providing and laying of RCC Hume pipe(NP2) for Communication cables. Cost to include RCC collar and necessary civil works like jointing of hume pipes with mortar as required.(Excavation & Back filling cost not included) - For Communication & Earthing-200 mm Dia RCC Hume pipe |
| 383 | SINAGE |
| 384 | Providing and fixingof signage made out of stainless steel (SS304 grade) letters of size 300X300 of depth 50 (N.S.W.I) |
| 385 | Digital display board (Logo) of round size-4\"-0\" dia. |
| 386 | PA SYSTEM |
| 387 | 30W HORN ABS ELLIPTICAL-Maximum power 45 W,Rated power (PHC) 30 W,Power tapping 30 / 15 / 7.5 / 3.75 W,Sound pressure levelat rated power / 1 W(1 kHz, 1 m)-115 / 100 dB (SPL),Sound pressure levelat rated power / 1 W(1 kHz, 4 m)-100 / 86 dB (SPL),Effective frequency range(- 10 dB)-212 Hz to 20 kHz, ABS material, two-way system for high-quality speech and music,reproduction, water and dust protected IP66, EN54-24 certified, light gray RAL 7035 |
| 388 | 15 Watt Cabinet Speaker ,Description Premium-sound Cabinet Loudspeaker,Maximum power 22.5 W,Rated power (PHC) 15 W,Power tapping 15/7.5/3.75/1.9 W,Sound pressure level at rated power / 1 W (1 kHz, 1 m)-99/87 dB (SPL),Effective frequency range (-10 dB) 95 Hz to 20 kHz,Opening angle at 1 kHz / 4 kHz(-6 dB)-184° / 112° (hor.), 170° / 35°(ver.),Rated input voltage 11/70/100 V,Rated impedance 8/326/667 ohm |
| 389 | 60 Watt 4 microphone / line inputs, plus music source input,Announcement only output, 3-wire volume override,, 2-tone chime Frequency response (line) - 80Hz to 18kHz (+1/-3dB @ -10 dB ref. rated output), Distortion - <1% at rated output power, 1kHz, Loudspeaker direct out put - 100V, 4Ohm, Input Voltage - 230VAC +10% at 50/60Hz or 24VDC |
| 390 | 480W BOOSTER AMPLIFIER FOR POWER EXPANSION Frequency response - 60Hz to 18kHz(+1/-3dB at -10 dB ref. rated output, Distortion - <1% at rated output power, 1kHz, S?N (flat at max Volume) - >90dB, Loudspeaker direct output - 100V, 70V, 8/4 Ohm, Input Voltage - 230VAC +10% at 50/60Hz or 24VDC |
| 391 | Microphone features a large press to talk call button for uease of use and the flexible gooseneck enables the microphone to be positioned as required. A green LED confidence light illuminates to let you know the mic is in use,PTT-key for calls for activation,Momentary or toggle,Green LED, indicating microphone active,Stable metal base design with fixed 2 m cable and lockable Euro style connector,Phantom powered by amplifier |
| 392 | 9U Mounting Rack |
| 393 | 2Core 1.0sqmm Loudspeaker Cable |
| 394 | Cabling of the Loudspeaker Cables as per site condition |
| 395 | Installation of speaker, amplifier, testing and commissioning of the system |
| 396 | FIRE FIGHTING |
| 397 | FIRE EXTINGUISHERS-(make-Fire Tipsintime/Fire Shield)Providing and Fixing carbon dioxide type Fire Extinguisher -a) 4.5 kg. capacity |
| 398 | Providing and fixing ABC fire extinguisher fixed with bolts, nuts and washers complete in all respects.a) 6 kg. capacity |
| 399 | EXIT SIGNAGE With Evacution System-SITC of Self illuminated Autoglo exit Signs- Fire Exit with one side arrow size.300x150mm. |
AI Tender Summary
Tender Timeline
Mar 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender