Annual Repairing Of The Minor Work Of Iti Office Complex At Kailashahar, Unakoti Tripura During The Year 2021-22 Sh Earth Filling, Partition Wall, Plastering , Cycle Stand Toilet Cum Wash Room Re Placement Of Windows By Aluminum Window
Tender Value
34.97 Lakhs
Estimated cost
Bid Submission
19 Apr 2022
0 days left
EMD
34979
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kailashahar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repairing Of The Minor Work Of Iti Office Complex At Kailashahar, Unakoti Tripura During The Year 2021-22 Sh Earth Filling, Partition Wall, Plastering , Cycle Stand Toilet Cum Wash Room Re Placement Of Windows By Aluminum Window
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in rough excavation, banking excavated earthin layers not exceeding 20 cm in depth, breaking clodswatering, rolling each layer with ½ tonne roller or woodenor steel rammers, and rolling every 3rd and top-most layerwith power roller of minimum 8 tonnes and dressing up inembankments for roads, flood banks, marginal banks andguide banks or filling up ground depressions, lead upto 50m and lift upto 1.5 m :-All kinds of soil |
| 2 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceablematerials with all lifts and upto a lead of 50m etc.complete as per direction of the Engineer- in-charge:- l In cement mortar. |
| 3 | Providing wood work in frames of false ceiling,partitions etc. sawn and put up in position :Local Teak Wood |
| 4 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position :Local Teak Wood |
| 5 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessaryscrews excluding panelling and or glazing, which will be paid for separately but including the woodenbeading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.(i)Local Teak wood (1)35 mm thick shutters |
| 6 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mmthick.(i)Local Teak Wood 16 mm thick |
| 7 | Providing and fixing flat pressed 3 layer particleboard medium density exterior grade (Grade I) orgraded wood particle board IS : 3087 marked toframe, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):12 mm thick |
| 8 | Dismantling old glass panes from wooden / steel structures including stacking of serviceable materials and disposal of rubbish and unserviceable materials to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 9 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a leadof 50 m .All kinds of soil |
| 11 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centring andshuttering --All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) cum |
| 13 | First class brick work in foundation and plinthincluding cost of all materials as required complete:-In cement mortar 1:4( 1 cement : 4 fine sand ). |
| 14 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement-1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate20 mm nominal size) |
| 15 | Centering shuttering including struttings, propping etc.and removal of form work for: (i)Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 16 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding allcomplete upto plinth level. |
| 17 | 12 mm cement plaster of mix(IV) Cement mortar 1:6 (1 cement : 6 fine sand) |
| 18 | 15 mm cement plaster on the rough side of single orhalf brick wall of mix:te. |
| 19 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 20 | Fixing chowkhats in existing opening includingembedding chowkhats in floors or walls, cutting masonry / RCC / CC for hold fasts, embedding holdfasts in cement concrete blocks with cement concrete 1: 3 : 6 ( 1 cement : 3 fine sand : 6 graded well burntbrick aggregate 20 mm nominal size ) painting twocoats of coal tar to sides of chowkhats and makinggood the damages to walls and floors as requiredincluding disposal of rubbish to the dumping ground with all leads and lifts complete as per direction of theEngineer in charge:- |
| 21 | Renewing glass panes, with putty and nails wherevernecessary including racking out the old putty:Float glass panes of thickness 4 mm |
| 22 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square or round bars etc. all complete. .1.Fixed to steel windows by welding. |
| 23 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction of Engineerincharge.(Glazing and panelingand paneling and dash fasteners to be paid for separately) :-(i)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 24 | For shutters/ sliding shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):- Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15 |
| 25 | Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge : (a)With glass/float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm |
| 26 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 27 | Providing and fixing M.S. round holding down bolts withnuts and wahser plates complete as per standard design. |
| 28 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required (ii)0.63mm thick with zinc coating not less than 275gm/m2 |
| 29 | Providing and fixing aluminium sliding door bolts ISImarked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc.complete :a. 300x16 mm |
| 30 | (b) 250x16 mm |
| 31 | Prov iding and fixing aluminium tower bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed torequired colour or shade with necessary screws etc.complete:a.300x10 mm |
| 32 | b.. 150x10 mm |
| 33 | Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :1.125mm |
| 34 | 2. 150x10 mm |
| 35 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. 40 mm thick with 20 mm well burnt brick aggregate |
| 36 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) ofapproved make in all colours, shades of any size asapproved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cementmortar 1 : 3 (1 cement : 3 fine sand) jointed withordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complet e(a) Soluble Salt Stainfree vitrified tiles(i)Size of tile 60x60 cm. |
| 38 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] New work ( two or more coats) over and including waterthinnable priming coat with cement primer. |
| 39 | Distempering with oil bound washable distemper ofapproved brand and manufacture and of required shade on old work ( one or more coats ), to give aneven shade as required complete as per direction of theEngineer in charge. |
| 40 | Finishing walls with water proofing cement paint ofrequired shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
| 41 | Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. |
| 42 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcisternwithmanuallycontrolleddevice(handlelever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 43 | Providingand fixing wash basinwith C.I. brackets, 15 mm C.P. brass pillartaps,32mmC.P.brasswasteofstandardpattern,including paintingoffittingsandbrackets,cuttingandmakinggoodthewalls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 44 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 45 | Providing and fixing soil, waste and vent pipes: 1.)100 mm dia..(i) Sand cast iron S&S pipe as per IS: 1729. |
| 46 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 1.1For 100 mm dia. |
| 47 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete..1 100 mm Sand cast iron S&S as per IS - 1729 |
| 48 | Providing and fixing plain bend of required degree. 100 mm1. Sand cast iron S&S as per IS - 17299 |
| 49 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.1.100x100x100 mm.Sand cast iron S&S as per IS - 1729 |
| 50 | Providing and fixing single equal plain junction of required degree100x100x100 mm Sand cast iron S&S as per IS - 1729 |
| 51 | Providing and fixing terminal guard:. 100 mm 1. Sand cast iron S&S as per IS - 1729 |
| 52 | Providing and fixing collar:.100 mm.1Sand cast iron S&S as per IS - 1729 |
| 53 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: (i).100 mm |
| 54 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): |
| 55 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 56 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved 450mm long towel rail with total length of 495mm, 78mm wide and effective height quality and colour.450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc..(i)15 mm dia. nominal bore |
| 58 | (ii) 25 mm dia. nominal bore |
| 59 | (ii) 40 mm dia. nominal bore |
| 60 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (a)25 to 40 mm nominal bore |
| 61 | Providing and fixing uplasticised PVC connection pipe with brass unions : (a)45 cm length (i)15mm nominal bore |
| 62 | Painting G.I. pipes and fittings with synthetic enamel white paint overa ready mixed priming coat, both of approved quality for new work : (i)15 mm diameter pipe |
| 63 | (ii) 25 mm diameter pipe |
| 64 | (iii) 40 mm diameter pipe |
| 65 | .Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931(i)15 mm nominal bore |
| 66 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (i)15 mm nominal bore. |
| 67 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.. |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. (i)15 mm nominal outer dia |
| 69 | (ii)25 mm nominal outer dia |
| 70 | (iii) 40 mm nominal outer dia |
AI Tender Summary
Tender Timeline
Mar 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender