Execution Of Sajwan Kanda Group Of Villages Pumping Water Supply Strengthening And Appurtenant Works Scheme Including All Civil And E And M Works Execution Of Sajwan Kanda Group Of Villages Pumping Water Supply Strengthening And Appurtenant Works Scheme I
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Apr 2022
0 days left
EMD
3.92 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
devprayag → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Execution Of Sajwan Kanda Group Of Villages Pumping Water Supply Strengthening And Appurtenant Works Scheme Including All Civil And E And M Works Execution Of Sajwan Kanda Group Of Villages Pumping Water Supply Strengthening And Appurtenant Works Scheme Including All Civil And E And M Works
BOQ
| Sl. No. | Item Description |
| 1 | PART- A ( CIVIL WORKS ) |
| 2 | Construction of Staff Quarter Type -01(02 Nos) Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas exceeding 30cm in depth, 1.50m in width as well as 10 sqm on plan) including disposal of excavated earth within a lead of 50 m & lift up to 1.5 mtr. Disposal earth to be leveled and neatly dressed. Excavation in all kind of soils. (Site development) |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 4 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 5 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentering and shuttering finishing and reinforcementall all work up to plinth level or in ground floor in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 grad aggregate 20 mm nominal size) |
| 6 | Reinforcement in RCC work including straightening,cutting, bending, placing in position and binding, using Thermo-Mechanically Treated bars all complete. |
| 7 | Foundation raft & tie beams |
| 8 | Columns |
| 9 | Beams |
| 10 | Slab Beams |
| 11 | Brick work with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (In superstructure) |
| 12 | 40mm thick DPC in 1:2:4 with cement, sand and 20mm gauge stone ballast mortar. |
| 13 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitered and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applyinga priming coat of approved steel primer. |
| 14 | Providing and fixing M.S. grills of required pattern in frame fixed to windows, ventilators by welding. |
| 15 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. (Using M.S. angles 40x40x6 mm for diagonal braces Doors) |
| 16 | Provide 15 mm thick plaster in 1:4 cement and sand mortar (Rough &.plain both sides) |
| 17 | Provide acrylic smooth exterior paint (two or morecoats) to give an even shade. |
| 18 | Painting on doors and windows (two or more coats over and including one priming coat. |
| 19 | Supply and fixing of 4mm thick plane glass panes on window\"s including supply of nails and putty etc all complete. |
| 20 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 21 | Sanitary Items Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 450x300 mm with single (15 mm C.P. brass pillar tap) |
| 23 | Providing and fixing G.I. pipes complete with G.I.fittings and clamps/c cutting and making good the walls etc. Internal work (15 mm dia nominal bore) |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (15 mm nominal bore) |
| 25 | Supply and fixing of PVC pipes for waste water and sewer pipes (75 mm diameter) |
| 26 | 110 mm diameter |
| 27 | Electrification work @ 15% off Total cast of Staff Quarter |
| 28 | Bonderi wall for water Trestment PlantRR masanory below plinth |
| 29 | RR masanory Above plinth |
| 30 | PCC above wall |
| 31 | CC Blocks below plinth |
| 32 | SIGN BOARDProviding and erecting MS iron angle base frame work including exacavation, painting and letter writing etc. |
| 33 | Inside Village works Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing,filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.The Cost of CWRs of corresponding capacities has been given in 5KL |
| 34 | 10KL |
| 35 | 15KL |
| 36 | RR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete |
| 37 | Providing of all materials,Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes(including supply of all jointing materials, white lead, hemp and oil etc) in trenches withits cutting, threading and testing of pipe line etc complete.G I PIPE(M) 15mm dia |
| 38 | G I PIPE(M 20mm dia |
| 39 | G I PIPE(M 25mm dia |
| 40 | G I PIPE(M 32mm dia |
| 41 | G I PIPE(M 40mm dia |
| 42 | G I PIPE(M 50mm dia |
| 43 | G I PIPE(M 65mm dia |
| 44 | G I PIPE(M 80mm dia |
| 45 | Excavation of earth for pipeline in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assumingthat 90% pipe line is laid in trenches, it is estimated that 75% excavation will be in soilmixed with shingle, bajari and boulders and rest 25% will be in medium rock Soil mixed with boulder (SMB) |
| 46 | Medium Rock (MR) |
| 47 | Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete Wheel Valve 25mm dia |
| 48 | Wheel Valve 32mm dia |
| 49 | Wheel Valve 40mm dia |
| 50 | Wheel Valve 50mm dia |
| 51 | Wheel Valve 65mm dia |
| 52 | Wheel Valve 80mm dia |
| 53 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :(CP BRASS BIB COCK) |
| 54 | Providing and supplying C.I. mouth, brass ferrule 15 mm dia (For Village) |
| 55 | Making ferrule connection in the existing main of G.I, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials.Providing and supplying C.I. mouth, brass ferrule 15 mm dia (For Village) |
| 56 | Construction of wheel valve chamber (0.60x0.60x0.60) cm |
| 57 | Woltmen bulk water meter 25mm dia |
| 58 | Woltmen bulk water meter 32mm dia |
| 59 | Woltmen bulk water meter 40mm dia |
| 60 | Woltmen bulk water meter 50mm dia |
| 61 | Woltmen bulk water meter 65mm dia |
| 62 | Woltmen bulk water meter 80mm dia |
| 63 | Polypropelene water mter box BLAN ( 393*178*160) |
| 64 | PIPE TESTING FOR IS VILLAGE |
| 65 | PART -B (E&M WORKS)Supply, Installation, Testing and Commissioning Of Following Pumping Plant with Acessories.Supply of Raw Water Centrifugal Multistage Pump with base frame, coupling and coupling guard: 1600 LPM with 120 Mtr head for intake well |
| 66 | Supply of Kirloskar make 60 HP electric motor 1450 rpm suitable for above pump. |
| 67 | Supply of Clear Water Centrifugal Multistage Pump with base frame, coupling and coupling guard: 1750 LPM with 420 Mtr Head for MPS |
| 68 | Supply of Kirloskar make 150 HP electric motor 1450 rpm suitable for above pump. |
| 69 | Supply of Clear Water Centrifugal Multistage Pump with base frame, coupling and coupling guard: 1750 LPM with 420 Mtr Head for IPS |
| 70 | Supply of Kirloskar make 150 HP electric motor 1450 rpm suitable for above pump. |
AI Tender Summary
Tender Timeline
Mar 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender