|
| 1 | Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr. All kind of soils. |
| 2 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) |
| 3 | Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtrand with all lift. |
| 4 | Carriage of earth including loading,unloadiing etc lead up to 1 km |
| 5 | Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto distance of 100 mtr. Including trimming bottom and side slope in accordance with requirement of lines, grades and corss-sections. |
| 6 | P & F plain fiber glass sheet ( FRP sheet fiber reinforcement product sheet conforming to IS: 12866-1989 having minimum thickness as below including fixing with nuts, bolts hooks and bitumen washer etc. complete:3.0 mm thick (Wt. 5.0 kg/mtr.sq) |
| 7 | Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level upto 4.5 mtr height.Hot finished welded type tubes. |
| 8 | Providing corrugated G.I. sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets. 1.60mm thick |
| 9 | Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 10 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:25mm thick |
| 11 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 12 | Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable materialwithin 50 mtr lead.In cement mortar |
| 13 | Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead.In cement mortar For thickness of tiles 25mm to 40mm |
| 14 | Providing and fixing external grade board solid core (tripple core) single leaf boiling water and termite resistant flush door shutters ISI 2202-67 marked using phenol formaldehyde resin in glue both sides with approved steel fittings complete as per annexure\"A\". decorative teak veneer both sides (factory fitted) 35 mm thick |
| 15 | P/F Ist quality Vitrified Porcelain Polished tiles on floor skirting and steps etc. in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colour and shade, laid with 20mm thick C.M. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm |
| 16 | Providing and fixing Ist quality MAT finished ceremic tiles size 400x 400 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 17 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 450 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 18 | Add extra for using coloured dark shade tiles instead of white /ivory /light grey/ light green/sky blue /light brown and other ligh shade colours |
| 19 | Add extra for plaster over item nocement mortar 1:4 |
| 20 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 21 | Brick masonaryin super structureup to third storeywith bricks of classdesignation 75 in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) |
| 22 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15° , landings, balconies , shelves ,chajjas, lintels, bands, plain window, sills ,staircases and spiral staircases M20 grade Design mix (with weight batching plant only) |
| 23 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Walls (any thickness) including attached pilasters buttresses,plinth and string courses fillets columns pillars pearsabutments posts struts etc.M20 grade Design mix (with weight batching plant only) |
| 24 | Centering & shuttering with steel plates including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for:Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockessills, chhajjas, lintel, beams etc. |
| 25 | Providing and fabricating reinforcement for RCC workincluding straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Thermo mechanically treated bars (conforming to relevant IS:1786.) |
| 26 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbingand polishing of.Jhunjhunu/Jalore(Red/Choclate colour) Above 3601 cm2 Slabs |
| 27 | Extra for providing edge moulding to 16 - 18 mm thick marble stone counters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. |
| 28 | Providing & fixing anodized aluminium work (anodizing to be got done from approved anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming toIS : 733 & IS: 1285 anodized transperent 81 dyed to required shade according to IS:1868 (Minimum anodic coating grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, C.P. brass/Stainless steel screws, Al. Tower bolt & Al handle & Al drop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately).For fixed portions. |
| 29 | --do--- for shutters of openable doors, windows and ventilators including providing & fixing hinges/rollers etc. and making provision for fixing of fittings wherever required (lockers shall be paid for separately.). |
| 30 | --do--- for shutters of openable sliding , windows and making provision for fixing of fittings wherever required (lockers shall be paid for separately.). |
| 31 | P&F glazing in aluminium door, window, ventilator, shutters and partitions etc. with P.V.C./Neoprene or gasket etc.complete as per the architectural drawings & the directions of Engineer Incharge. (cost of Aluminium snap beading shall be paid in basic item). with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/sqm). |
| 32 | Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II conforming to IS:12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in alluminium doors, windows, shutters and partition frames with C.P., brass/ stainless steel screws etc.complete as per architectural drawings and direction of Engineer Incharge. Prelaminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 33 | P&F expanded grill made of anodised aluminium as per design and drawing having members section of 7.5mm x 6.0mm and opening of size 50 mm x 50 mm to aluminium window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of Engineer-Incharge |
| 34 | S/F fixed wire gaugeofstainless steel of 14 mesh x 24 gauge to the aluminium beading 20x3 mm with suitable screw at not exceeding 150 mm distance at all hight with all lead and lift with scaffolding. |
| 35 | P&F brass lock without handle for Aluminium door, of approved quality, make & design as directed by Engineer-in-charge. |
| 36 | P & F double action Hydraulic floor spring of approved brand and manufacture to aluminium door shutter including cost of cutting floors as required embedding in floors and cover plate etc. complete as per directon of Engineer in charge Confirming to IS:6315 make |
