Electrical Installation For Health And Wellness Centre At Devipurdiarah Sc, Kaliachak-Ii Block, Malda. ( Electrical )
Tender Value
2.64 Lakhs
Estimated cost
Bid Submission
15 Apr 2022
0 days left
EMD
5500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kaliachak → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Electrical Installation For Health And Wellness Centre At Devipurdiarah Sc, Kaliachak-Ii Block, Malda. ( Electrical )
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing 240V ,32A DP with fuse on L&N (Rewirwable type) SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S&F2nos.fuse as per rating.(Make- Havels). |
| 2 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – As per Drawing no. 470 of PWD Specification Book – May 1991). 2.1)2 bars 240 v, 63 A Dimention of Al bars[85 mm long] dimention of sheet metal box 300x150mm complete chamber. |
| 3 | Supplying and fixing 250 V, 6-10A per way, SPN MCBDB with SS enclosure double-door with IP- 42/43 protection with DP MCB as incomer and SPMCBs (\"C\" Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make:LEGRAND) 3.1)a) 2+12 Way: Enclosure (607712), 40A DP MCB, 10 no. SPMCB, enclosure |
| 4 | b)2+8 Way: Enclosure (607711), 40A DP MCB, 6 no. SPMCB, enclosure. |
| 5 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. 4.1)Avg run 6 Mtr. |
| 6 | Avg run 8Mtr.[1c / E-20] |
| 7 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.5.1)On board |
| 8 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 9 | Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approvedby EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc. |
| 10 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand approved by EIC) type SP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 11 | Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A,SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl.S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. |
| 12 | S & D 250V, 4 Ft. Long SingleLEDTube Light fittings complete with all accessories having Industrial Box type CRCA body, Pre-coated in white & pre-wired for LED tube. (Make: Philips)10.1)(i) TMC 501 P1 x T-LED incl. 01 No. MAS LEDtube 1200mm 18W T8 I - 2100lm. |
| 13 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with pre provided 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 14 | Fixing only single / twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. |
| 15 | S & F of 1200 mm (48\") Sweep Single Phase AC Ceiling Fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (Make: Orient PSPO / USHA Striker) |
| 16 | S & F 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 17 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. |
| 18 | Supply and delivery of 1.1 KV grade following PVC A/Al Cable with 10SWG gi wire16.1) i) 10SWG gi wire |
| 19 | ii) 2 Core 6 Sq.mm |
| 20 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :17.1) ii) 2 Core 6 Sq.mm |
| 21 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials ii) 2 Core 6 Sq.mm |
| 22 | Laying of cable 4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 23 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 24 | Supplying and Drawing 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in suitable size polythene pipe and by GI fish wire and making necy. connection as required incl. supply and laying of polythene pipe and GI Fist wire after cutting channel in wall and mending good the damages as to GS.i) 2 x 2.5 Sq. mm. + 1 x 1.5 Sq. mm. |
| 25 | iii) 2 x 6 Sq. mm. + 1 x 4 Sq. mm. |
| 26 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.i) 2.5sqmm |
| 27 | ii) 4 sqmm |
| 28 | iii) 6 sqmm |
| 29 | Supply & Fixing 240 Volt, 9 watt,825 lm LED BulbB22 cap.[ Cormton/ Philips make] With lamp point. |
| 30 | Supply & Fixing of (12\"\")exhaust fan after making hole in wall and making gooddamages and smooth cement finish etc. as practicable aspossible including louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter.(Make-EPC Heavy Duty,Usha,CG,Bajaj or equivalent Make.) |
| 31 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground levelBy ISI-Medium GI pipe |
| 32 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 33 | Connecting the equipments to earth busbar including S & F 10 SWGGI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages |
| 34 | Supply of 45 Watt LED streetlight make Crompton, Cat No. FREEDOM NEO, LSTP-45-CDL-M) 9 PHILLIPS / HAVELLS ) |
| 35 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 36 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover as per G.S. [5/H-5] |
| 37 | Supplying & Fixing 240 V AC/DC superior type Multitune (min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board. |
| 38 | WBSEDCL Service Connection (LS) |
| 39 | Applicable GST @ 12% |
| 40 | Labour wellfare CESS @ 1% |
AI Tender Summary
Tender Timeline
Mar 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender