|
| 1 | E/W in excavation by manual means in trenches for foundations, drains, pipes, cables etc (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed including all dewatering involved. |
| 2 | In all kinds of soils |
| 3 | Earthwork in excavation by mechanical means (Hyd. Excavator) over areas (exceeding 30cm in depth 1.5 mtr. in width as well as 10 sqm. plan) including disposal of excavated earth lead upto 50 mtr. and lift upto 1.5 mtr. disposed earth to be leveled and neatly dressed including all dewatering involved. |
| 4 | In all kinds of soils |
| 5 | Laying and fitting of GI pipes complete excld. cost of pipes and earthwork: |
| 6 | 150mm dia GI pipes |
| 7 | 100 mm dia GI pipes |
| 8 | 80 mm dia GI pipes |
| 9 | 65 mm dia GI pipes |
| 10 | 50 mm dia GI pipes |
| 11 | 40 mm dia GI pipes |
| 12 | 25 mm dia GI pipes |
| 13 | 20 mm dia GI pipes |
| 14 | Filling available excavated earth excluding rock in trenches, plinth, sides of foundation etc in layersnot exceeding 20 cm in depth consolidating each deposited layer by rammingand watering lead up to 50m and lift up to 1.5m. |
| 15 | Dismantling G.I/ D.I/ C.I/ QC pipes (external work) incld. excavation and refilling trenches after taking out the pipes, manually / by mechanical means incld. stacking of pipes within 50 mtrs lead: |
| 16 | Above 40 mm nominal bore (G.I) |
| 17 | 15 - 40 mm nominal bore (G.I) |
| 18 | DI/CI pipes from 100mm dia upto 300mm dia |
| 19 | DI/CI pipes from 300mm dia upto 350mm dia |
| 20 | QC pipes below 101.2mm dia |
| 21 | QC pipes above 101.2mm dia upto 152.4mm dia |
| 22 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excld. cost of pipes) |
| 23 | Providing push – on – joints to centrifugally (spun) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket |
| 24 | 100 mm dia pipes |
| 25 | 125 mm dia pipes |
| 26 | 150 mm dia pipes |
| 27 | 200 mm dia pipes |
| 28 | 250 mm dia pipes |
| 29 | 300 mm dia pipes |
| 30 | 350 mm dia pipes |
| 31 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve.(Old one to be returned to Divisional Stores) |
| 32 | Providing fitting ofM.S Flanges t0 G.I pipes (10mm thick) class “A” rating to sustain high pressureupto 25kg/cm2 by way of weldingG.I pipes including cutting of threaded portionshall be returned to Divisional Store) the job includescost of nuts, bolts washers etc and carriage of pipes from Divisional store upto workshop, then workshop upto road site of work incl , jointing , successful testing and commissioning complete all told |
| 33 | 150mm dia |
| 34 | 100mm dia |
| 35 | 80mm dia |
| 36 | 65mm dia |
| 37 | Providing / fixing of double collers, G.I. for arresting of leakages by using spun yarn/ wooden plugsexcl. earthwork including all sorts of carriages (length varying from 0.60 to 1 Mtr.) |
| 38 | 40 mm dia G.I |
| 39 | 50 mm dia G.I |
| 40 | 65 mm dia G.I |
| 41 | 80 mm dia G.I |
| 42 | 100 mm dia G.I |
| 43 | 150 mm dia G.I |
| 44 | 200 mm dia C.I |
| 45 | 250 mm dia C.I |
| 46 | 300 mm dia C.I |
| 47 | Welding of pipe/ pipe fittings for fixing of M.S/ G.I tees, bends, tail pieces and making new connections by welding incl. transportation of electric welding plant upto site of work (Photographic evidence before and after execution be provided with work done estimate.) excluding earthwork excavation |
| 48 | Providing and fixing including testing, commissioning & fabricating at site M.S pipe fittings/ Specials incld. M.S flangesmade out of 6 mm thick M.S sheet including cost of flanges 12mm thick Nuts, Bolts, washers etc & all sorts of carriages upto site of work, as per requirement at site complete job. |
| 49 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. |
| 50 | Lighting points |
| 51 | Heating points |
| 52 | Providing and fitting of pipe specials from open market, if not available in the Divisional stores (available supplies if any has to be lifted from the Divisioanl stores). ISI make of reputed quality photographic evidence/ line/ site plan to be appended with the estimate. |
| 53 | 80 mm dia G.IUnion |
| 54 | 65 mm dia G.I. Union |
| 55 | 50 mm dia G.I. Union |
| 56 | 40 mm dia G.I. Union |
| 57 | 25 mm dia G.I. Union |
| 58 | 20 mm dia G.I. Union |
| 59 | 80 mm dia G.I. Elbow |
| 60 | 65 mm dia G.I. Elbow |
| 61 | 50 mm dia G.I. Elbow |
| 62 | 40 mm dia G.I. Elbow |
| 63 | 25 mm dia G.I. Elbow |
| 64 | 20 mm dia G.I. Elbow |
| 65 | 80 mm dia G.I. Socket |
| 66 | 65 mm dia G.I. Socket |
| 67 | 50 mm dia G.I. Socket |
| 68 | 40 mm dia G.I. Socket |
| 69 | 25 mm dia G.I. Socket |
| 70 | 20 mm dia G.I. Socket |
| 71 | 80 mm dia G.I. Nipple upto 10\" |
| 72 | 65 mm dia G.I. Nipple upto 10\" |
| 73 | 50 mm dia G.I. Nipple upto 10\" |
| 74 | 40 mm dia G.I. Nipple upto 10\" |
| 75 | 25 mm dia G.I. Nipple upto 10\" |
| 76 | 20 mm dia G.I. Nipple upto 10\" |
| 77 | 15 mm dia G.I. Nipple upto 10\" |
| 78 | 25x25x20 mm dia G.I. Equal Tee |
| 79 | 40x40x25 mm dia G.I. Equal Tee |
| 80 | 50x50x40 mm dia G.I. Equal Tee |
| 81 | 65x65x50 mm dia G.I. Equal Tee |
| 82 | 80x80x65 mm dia G.I. Equal Tee |
| 83 | 25x20 mm dia Socket/ Reducer |
| 84 | 40x25 mm dia Socket/ Reducer |
| 85 | 50x40 mm dia Socket/ Reducer |
| 86 | 65x50 mm dia Socket/ Reducer |
| 87 | 80x65 mm dia Socket/ Reducer |
| 88 | 25x20 mm dia Elbow/ Reducer |
| 89 | 40x25 mm dia Elbow/ Reducer |
| 90 | 50x40 mm dia Elbow/ Reducer |
| 91 | 65x50 mm dia Elbow/ Reducer |
| 92 | 80x65 mm dia Elbow/ Reducer |
| 93 | Supply of Kerosene |
| 94 | Re-threading of damaged pipe ends including carriage from site to workshop and back. (Photographic evidence be provided with work done estimate) |
| 95 | 20 mm dia |
| 96 | 25 mm dia |
| 97 | 40 mm dia |
| 98 | 50 mm dia |
| 99 | 65 mm dia |
| 100 | 80 mm dia |
| 101 | Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity. (Photographic evidence before and after execution be provided with work done estimate.) |
| 102 | For 0.50 HP to 2.00 HP |
| 103 | For 3.00 HP to 5.00 HP |
| 104 | For 5.00 HP to 10.00 HP |
| 105 | Dismentalling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacuring of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacemnet of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job) (Photographic evidence before and after execution be appended with work done estimate.) |
| 106 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 107 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 108 | White washing with lime to give an even shade. New Work (three or more coats) |
| 109 | Colour washing such as green blue or buff to give an even shade |
| 110 | New work (two or more coats) with a basecoat of white washing with lime. |
| 111 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade |
| 112 | Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer |
| 113 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm |
| 114 | Old work (one or more coats) [email protected] kg/1 Osqm over priming coat of primer applied @ 0.80 litres/1 0 sqm complete including cost of priming coat. |
| 115 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 116 | Applying priming coat: with ready mixed aluminium primer of approved brand and manufacture on resinous wood and ply wood |
| 117 | with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 118 | with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat) |
| 119 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats) |
| 120 | Old steel work (one or more coats) |
| 121 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc completeOn steel work |
| 122 | Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 123 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 124 | Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 125 | Painting one thin coat with white lead of approved brand and manufacture on wet or patchy portion of plastered surfaces. |
| 126 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. Photographic evidence be appended work done estimate. |
| 127 | 5 KV to 10 KV |
| 128 | 10 KV to 20 KV |
| 129 | 20 KV to 30 KV |
| 130 | 40 KV to 50 KV |
| 131 | Laying/Shrouding Supply of graded filter media at site of work incl. all carraiges from Ganderbal and Stacking of sameas per shape and size ( as per directions of site incharge )Specification :-Filter media shall be free from dirt and other forign matter. |
| 132 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution including all dewatering charges (complete job).(Photographic evidence before and after execution be provided with work done estimate.) |
| 133 | Making connection of GI distribution branch with GI main of following sizes, incld. All accessories required during execution. |
| 134 | 25 to 40 mm dia nominal bore |
| 135 | Above 40 mm nominal bore |
| 136 | Restoration ofpipes blocked due to frost by way of removal of frost by using fire wood koil, blue lamps etc. complete. |
| 137 | Upto 100 mm dia |
| 138 | Above 100 mm dia |
| 139 | Dismantling old plaster or skirting, ranking out joints and cleaning the surface for plaster incld. disposal of rubbish to the dumping ground within 50 metres lead. |
| 140 | Demolishing stone rubble masonry manually/ by mechanical means incld. stacking of serviceable material and disposal of unserviceable material within 50 mtr. lead: In cement mortar. |
| 141 | Demolishing of cement concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead. |
| 142 | Providing & laying in position cement concrete of specified grade excld. cost of centring & shuttering – All work upto plinth level; 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) Crushed |
| 143 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering, finishing and reinforcement– All work upto plinth level: 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 20 mm nominal size) |
| 144 | Providing and laying in position cement concrete of specified grade excld. cost of centring and shuttering – All work upto plinth level: 1:3:6 (1 cement : 3 coarse sand: 6 graded stone agg. 40 mm nominal size) (Nallah) |
| 145 | Reinforced cement concrete work in walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excld. cost of centring, shuttering, finishing and reinforcement: 1:1.5 :3 (1 cement : 1.5 coarse sand: 3 graded crushed stone agg. 20 mm nominal size) |
| 146 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excld. the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size). |
| 147 | Providing and layingcement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floors fillets etc. upto floor five level, excluding cost of centring, shuttering and finishing. 1:2:4 (1 cement : 2 coarse sand: 4 graded stone agg. 20 mm nominal size) Crushed |
| 148 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 thick with 20 mm nominal size stone agg. (Crushed) |
| 149 | Replacement of old damaged G.I. Gate valves/ Sluice valve by providing / fixing of new Gate valves/ Sluice valve including cost of nuts, bolts, rubber insulations all carriages upto site of works, complete (ISI make of reputed make). Old sluice/ gate valves to be returned to Divisional Store after completion of work within 03 days and (Photographic evidence before and after execution be provided with work done estimate.) |
| 150 | 100 mm dia Gate valve |
| 151 | 80 mm dia Gate valve |
| 152 | 65 mm dia Gate valve |
| 153 | 50 mm dia Gate valve |
| 154 | 40 mm dia Gate valve |
| 155 | 25 mm dia Gate valve |
| 156 | 20 mm dia Gate valve |
| 157 | 300 mm dia Sluice valve |
| 158 | 250 mm dia Sluice valve |
| 159 | 200 mm dia Sluice valve |
| 160 | 150 mm dia Sluice valve |
| 161 | 100 mm dia Sluice valve |
| 162 | Supplying of bedding itemsat filtration plants: |
| 163 | Bedding Set |
| 164 | Blankets |
| 165 | Search Torches |
| 166 | Electric bulbs (LED saver) |
| 167 | Centering and shuttering including strutting, propping etc and removal of form work for: |
| 168 | Foundations, footings, basis of columns etc. |
| 169 | Walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses etc. |
| 170 | Columns, pillar, piers, posts and struts. |
| 171 | Suspended floors, roofs, landings, balconies and access platform. |
| 172 | Lintels, beams, plinth beams, cantilevers, etc. |
| 173 | Stairs, (excld. landings) except spiral staircases. |
| 174 | Clearing snow (with frost) from Filtration Plants/ S.R\"s premisis etc. manually using picks and shovels; snow depth upto |
| 175 | Snow depth upto 150 mm |
| 176 | Snow depth over 150 mm but upto 600mm |
| 177 | Supply of fire wood / rejection wood incld. all carriages upto site of work, complete |
| 178 | Random Rubble masonry with hard stone from quarry in foundation and plinth inclkuding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortor 1:6 (1 Cement : 6 Coarse Sand) |
| 179 | Dry random rubble masonry with hard stone in foundation and plinth : Using nallah stone without bond stone |
| 180 | Providing / fixing of M.S. step collers from 100 mm to 450 mm dia including earthwork excavation, refilling, dewatering etc. including all sorts of carriages, complete |
| 181 | Cutting road and making good the same including supply of extra quantities of material i.e. aggregate, moorumscreening, red bajri and labour required.Water bound macadam |
| 182 | Quarry. |
| 183 | Renewing glass pans with wooden fillets wherever necessary, Glass pans weighing 10 kgs per Sqm (4 mm ) |
| 184 | Repairs / replacement of water closet / flushing cistern including necessary controlled device incld. replacement of accessaries etc. complete job |
| 185 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5min all kind of soil. |
| 186 | Structural steel work in single section without connecting plate incld. cutting, hoisting, fixing in position and applying an priming coat of approved steel primer all complete. |
| 187 | Structural steel work in single section with connecting plate incld. cutting, hoisting, fixing in position and applying an priming coat of approved steel primer all complete. |
| 188 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 189 | Steel work welded in built up sections / framed work incld. cutting, hoisting, fixing in position and applying a preming coat of approved steel primer using structural steel etc. as required :In gratings, frames, gates etc. |
| 190 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trussers and including cutting to size and shape shereverrequired. 0.50mm thick with zinc coating not less than 275 gm/m2 |
| 191 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/ m2 |
| 192 | Dismantling roofing including ridges, hips valleys and gutters, etc. and stacking the material within 50 metres lead of : G.S Sheet. |
| 193 | Supply of unskilled labours |
| 194 | Supply of skilled labour |
| 195 | Involvement of mechanical excavator JCB for excavation including POL (complete job). |
| 196 | Engagement of dewatering pump for arresting leakages including cost of fuel/ hire charges of pump andall carriages upto site of work complete (08 hours working time) |
| 197 | Providing fixing lead Caulking Joints to C.I/ D.I pipe line incl. cost of lead, fire wood etc. complete |
| 198 | Construction of crate bund at head sites including cost of stones / boulders collected from different Nallah pockets . The job includes wievingcharges cost of stones but exclduing cost of wire crates but including carraige from divisional store Baramulla and head load of material with all leads & lifts complete within the jurisdiction of Sub Division |
| 199 | Construction of diversion bund at various sites by way of earth/ sand filled bags got from borrow pits . The job includes cost of empty cement bags inclding filling of bags and carraiges |
| 200 | Supply andlaying , spreading of thick polythene sheets common type for protection of water leakages inclduing all carriages |
| 201 | Dismentling of flanged pipe line and refitting including cost of nuts, bolts, rubber washers if any during excavation |
| 202 | 150mm dia |
| 203 | 100mm dia |
| 204 | 80mm dia |
| 205 | 65mm dia |
| 206 | Cutting of pipe and providing and fixing M.S flanges to ends for fixing of Sluice Valves C.I ISI marked of reputed make of following dia pipes.(Photographic evidence be appended with work done estimate.) |
| 207 | 80mm dia |
| 208 | 100mm dia |
| 209 | 150mm dia |
| 210 | 200mm dia |
| 211 | 250mm dia |
| 212 | 300mm dia |
| 213 | Providing fixing ofPVC tankes with all accessories as per site requirement incld. all carraige complete. |
| 214 | Hiring of private water tankers of below capacity with licenced driver for providing drinking water supply to short fall areas. (excld. POL) |
| 215 | 12 KL |
| 216 | 6 KL |
| 217 | 9 KL |
| 218 | Providing fixing of C.I NRV\"s ISI marked of reputed make incld. cutting of pipes fixing of M.S flanges with cost of nuts, bolts, rubber washers incl. earth work complete of following dia\"s. |
| 219 | 100mm dia |
| 220 | 150mm dia |
| 221 | 200mm dia |
| 222 | 250mm dia |
| 223 | Providing fixing of air valve single orfice incld. making holes in the pipe, fixing of tail pieces by way of welding incl. all accessories complete. |
| 224 | 25mm dia air valve |
| 225 | 20mm dia air valve |
| 226 | Rectification of leakages of 250mm dia C.I rising main the job involves earth excavation as required to welder easily around the pipe moving of damaged gas cut from the collar and the welding by cost steel electrodes by D.G set at site. The job inclds. round bars double coat welding to avoid the leages and Providing fitting of collides to join the both ends of the pipe by the 50mm dia strip on equal 3 sports duly welded on it. The job includes higher charges of D.G set and allied accessories. |
| 227 | Wood work in frames of doors, windows etc., (KD/ Silver wood) |
| 228 | Providing fixing of panelled or pannelled and glazed shutters for doors, windows etc., complete |
| 229 | Providing fixing of wire guage shutters for doors, windows etc., complete |
| 230 | Supply of pocket salt |
| 231 | Providing fixing of apperture wire jali |
| 232 | Providng fixing of ceiling fan complete with all accessories |
| 233 | Providing fixing of ply board: |
| 234 | 8mm thick |
| 235 | 10mm thick |
| 236 | Providing fixing of PVC cistern complete with all accessories |
| 237 | Providing fixing of Brass Bib Cock of approved make |
| 238 | Hiring of private texi/ cab as and when required on emergent basis (including POL) |
| 239 | carriage of material from divisional store or from source to road/ dumping site of work by Mechnical Transport including loading unloading and stacking etc. |
| 240 | Cement/ Steel/ Pipes (below 100mm dia) average lead of: |
| 241 | 0-35 Kms |
| 242 | 0-70 Kms |
| 243 | Pipes 100mm dia and above G.I/ D.I average lead of: |
| 244 | 0-35 Kms |
| 245 | 0-70 Kms |
| 246 | Sand/ Aggregate/ Stone Soling average lead of: |
| 247 | 0-35 Kms |
| 248 | 0-70 Kms |
| 249 | carriage of material from dumping/ road site to actual site of work by Meanual Means including loading unloading and stacking etc. |
| 250 | Cement/ Steel/ Pipes (below 100mm dia) average lead of: |
| 251 | 0-500 Mtrs |
| 252 | 0-1000 Mtrs |
| 253 | Pipes 100mm dia and above G.I/ D.I average lead of: |
| 254 | 0-500 Mtrs |
| 255 | 0-1000 Mtrs |
| 256 | Sand/ Aggregate/ Stone Soling average lead of: |
| 257 | 0-500 Mtrs |
| 258 | 0-1000 Mtrs |
| 259 | Carriage of Ferric Alum/ Bleaching Powder from divisional store upto S.R\"s/ Filtration Plant Sites of Water Supply Schemes under jurisdiction of the Sub-Division average lead of: |
| 260 | Upto 15 Kms |
| 261 | 15 to 30 Kms |
| 262 | 30 to 45 Kms |
