Military Engineer Services-MES has published Special Repair Of 01 X Jcos And 01 Ors Married Accn Of 58 Gtc And Spl Repair To Old Vintage Ci / Gi / Ac Pipe From Six Tank To Ranipokhari Area And Abhimanyu Gate 58 Gtc Including Two Revenue Works At 58 Gtc, Happy Valley Under Ge Shillong.. Submission Date for this Tender is 11-04-2022. AC Pipes Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Apr-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-04-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of boarding any description fixed in any position complete all as specified and directed. |
| 2 | Dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing) removing serviceable to store and rubbish of the premisescomplete all as specified and directed. |
| 3 | Dismantling of plain or corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. |
| 4 | Dismantling of timber scantling 40 Sqcm and overin section in any position (unframed work) complete all as specified and directed. |
| 5 | Dismantling of wall ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed. |
| 6 | Demolition and breaking up drain pipes 150 mm dia (salt glazed stone ware, AC or reinforced concrete) pipe set in cement mortar and removing from site of work to a distance n exc 50mtr complete all as specified and as directed. |
| 7 | Demolition of concrete of any description in any position not otherwise specifically provided for. |
| 8 | Taking down cement plaster on brick or concrete surfaces in any position including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed by Engineer-in-Charge. |
| 9 | Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame)including builders hardware each complete all as specified and directed. |
| 10 | Taking down Chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each but with shutters (without taking off shutters from the frame)including builders hardware each complete all as specified and directed. |
| 11 | Taking up or down steel tubing withconnections of 15 mm bore pipe including cleaning for refixing or removal from sitewith all fittings complete all as specified and directed. |
| 12 | Taking up or down steel tubing withconnections of 20 mm bore pipe including cleaning for refixing or removal from sitewith all fittings complete all as specified and directed. |
| 13 | Surface dressing n.exc 30 cm deep and averaging 15 cm deep insoft / loose soiletc complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, man holes, pier holes etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. |
| 15 | Removing excavated materials (soil) to a distance n.exc 50 mand depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge. |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in hard/dense soil etc complete all as specified and as directed. |
| 17 | M&L forHardcore of crushed stone, gaugen exc 63mm, deposited, spread and levelled wellin layers n exc 15cm thick, watered and rammed to a true surface etc complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for PCC type D2 (1:4:8) using 40 mm graded crushed stone aggregate etc., as in foundation, filling and mass concrete etc., necessary formwork, complete all as specified and as directed by Engineer in Charge. |
| 19 | M&L for Precast cement concrete block masonry with solid block PCC, type C1 (1:3:6, using 20mm graded stone aggregate) exc 10 Cm in widthand setting in cement sand mortar1:6 complete all as specified andas directed by Engineer-in-Charge. |
| 20 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in path , plinth protection , sub floor etcfinishes concretesurface even & smooth or even and rough as required without using extra cement including necessary formwork etc complete all as specified and directed. |
| 21 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub baseetc complete all as specified and directed by Engineer in Charge. |
| 22 | M&L for PCC ( 1:2:4 )type B-0 ( using 12.5 mm graded crushed stoneaggregate) as in coping worksincluding necessary formworketc complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 24 | S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified anddirected by Engr-in-charge. |
| 25 | S&F 30 mm thick 2nd class hard wood flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 26 | S&F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc size of member of shutters as specified in SSR Pt-I section 8, Clause 8.24(a) supplied and fitted to chowkats etc complete all as specified anddirected by Engr-in-charge. |
| 27 | S&F 2nd class hard wood boarding 20mm thick fixed with nails in eaves board planned one side with butt joint complete all as directed. |
| 28 | M&L for 18/19 mm thick WPC (wood plastic composite) board of grade 1 quality exterior garage complete all as specified and directed. |
| 29 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed. |
| 30 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site complete all as specified and directed. |
| 31 | S&F Galvanised mildsteel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed |
| 32 | M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed. |
| 33 | M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed. |
| 34 | M&L for Glazed ceramic light shade tiles in vertical surface of size 450 x 300 x 7mm/350x250x7mm/ 300x600x7mm/ 200x 300 x 7mm thick setand jointed in neat cement slurry and pointed in white or colour cement to match with thetile colour over 10mm thick backing coatin CM 1:3 complete as specified and directed. |
| 35 | M&L for machine pressed pre polished factory made pavement chequered cement concrete tiles of size 300 X 300 X 25 mm or 200 x 200 x 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed in cement sand mortar (1:4)complete all as specified and as directed by Engr-in-charge. |
| 36 | M&L Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement and pointed with white cement with admixtures over 20mm thick rendering in CM 1:4 complete all as specified & directed. |
| 37 | M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) finished even and smooth without using extra cement all as specified and directed. |
| 38 | M&L for Rendering 15 mm thick in cement sand mortar (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Supply only integral water proofing compound (ISI Marked), using as per manufacturer instruction etc., complete all as specified and as directed. |
| 40 | M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/Gl/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed. |
| 41 | M&L for Anodised Aluminium snap grid frame work for false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T-flange of 25 mm and web of 30 mm fixed tosurrounding wall flange using nylon sleeves and SS screws andweb 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T . Main T is suspended from soffit at approx 1200 mm centre to centre with Gl wire of 6 mm dia ,cleat and steel expansion fasteners , GI frame shall be 60 CM X 60 CM to receive E- board ceiling etc completed all as specified and directed. |
| 42 | S&F prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof coveringof tensile strength 550 mpa including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 43 | S&F prepainted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in ridges, hips, valley gutter, drip, straight flashing etcof tensile strength 550 mpa including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 44 | S&F mild steel works such as Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F in repair Vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including PVCwater closet seat cover closed pattern with flat bottom and cover with PVC hinge device, flushing pipe, fixing bolt for pedestal pattern and making good to disturbed surfaces of flooretc complete all as specfied anddirected by Engr-in-charge. Make: Parryware/ Hindware/Cera/ Prayag |
| 46 | S&F in repair PVC (Plastic polymer flushing Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge. Make:- Prayag cat aprt no. 503 or equivalent make of Pearl/ Hindware. |
| 47 | S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts,complete all as specified and as directed by Engineer-in-Charge. Make:- Prayag cat Part no. 4645 IRIS or equivalent make of Jaquar & Company Pvt Ltd/ Prayag/ Cera(First Quality)/ Hindware (Italian Collection)/ Parry Ware (Super Fine) |
| 48 | S&F in repair Pillar tap,15 mm bore, cast copper alloy, screwed down, high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-ChargeMake:- Prayag /Hindware/ Jaquar/Essco |
| 49 | S&F in repairs CP Stop cock ( concealed type, ISI Mark),15 mm bore,fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and asdirected by Engr-in-charge. Make:-Make:- Prayag/ Hindware/ ESSCO |
| 50 | S&F in repair PVC connections 15 mm size with PTMT nuts 450mm long complete all as specified anddirected by Engr-in-charge. |
| 51 | S&F in repair CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Prayag Cat part No.7606 or equivalent model from make Cera/ Jaguar/ Parryware |
| 52 | S & F in repair CP grating doom 100 mm dia, ISI Mark, complete all as specified and as directed. |
| 53 | S&F in repair 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls/floors including clamps for securing pipe complete all as specified and directed. Make:- Prince / supreme. |
| 54 | S&F in repair 75 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls/floors including clamps for securing pipe complete all as specified and directed. Make:- Prince / supreme. |
| 55 | S&F 110mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. |
| 56 | S&F 75mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. |
| 57 | S&F 75mm bore PVC (SWR) Vent cowl with cement solvent, cement joints, complete all as specified and as directed. |
| 58 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedetc complete all as specified and directed. |
| 59 | S&F brass tower bolts and fixed of75mm length, ISI marked complete all as specified anddirected by Engr-in-charge. |
| 60 | S&F 100mm long bow handles made of brass, fixed with brass screw etc., ISI marked, complete, all as specified and as directed. |
| 61 | S&F Mild SteelButt hinges, medium weight, cold rolled, 100mm sizeISI Marked complete all as specified and directed. |
| 62 | S&F Mild SteelButt hinges, medium weight, cold rolled, 75mm sizeISI Marked complete all as specified and directed. |
| 63 | S&F Aluminium anodised, barrel tower bolts of extruded section200 mm length, ISI Mark, complete all as specified and as directed. |
| 64 | S&F Extruded aluminium anodised bow handles of150 mm length, ISI Mark,complete all as specified and as directed. |
| 65 | S&F Continuous (piano) hinges, brass, with width of flap ( when open) 30 mm, ISI Mark, complete all as specified and as directed. |
| 66 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in, ISI Mark, complete all as specified and as directed. |
| 67 | S&F in repair Bevelled edge mirror, of size 600mm x 450mm x5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 68 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified and directed. |
| 69 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 70 | S&F Rotational moulded HDPEpolyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including taking down old unserviceable tank of any capacity complete all as specified and directed. |
| 71 | M&L for Cutting chases, pinning in concrete block work, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 72 | S&F GI tubing 15 mm dia medium gradewith all fittings fixed in wall, ceiling or laid under floor with necessary clamp orhook complete all as specified and as directed. |
| 73 | S&F GI tubing 20 mm dia medium gradewith all fittings fixed in wall, ceiling or laid under floor with necessary clamp orhook complete all as specified and as directed. |
| 74 | S&F Sheet glass, 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sq m in each pane including hacking out old broken one etc complete all as specified and as directed. |
| 75 | S&F curtain rail 20 mm dia, mild steel chromium plated with fixing brackets, stops, and rollers etc., complete all as specified and as directed. |
| 76 | S&F double rod brackets, stops, and rollers etc., wooden finish for 20mm dia curtain rail, complete all as specified and as directed. |
| 77 | S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed. Make: Prayag/ Anjali/ Blue star |
| 78 | S&F Stainless steel kitchen plate rack of size 31" X 30" X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack complete all as specified and directed. Make : Blue star, Cat No - BSKPR-314 or equuivalent model from make Prayag/Anjali |
| 79 | M&L for complete removal of existing treatment of walls including cornices, pilasters etc and applying two coats of distemper oil emulsion over one coat of wall primer over a coat of 1 mm thick wall care putty, complete all as specified and directed. |
| 80 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 81 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed. |
| 82 | M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over one coat of wall primer over a coat of 1 mm thick wall care putty, complete all as specified and directed. |
| 83 | M&Lfor applying two or more coats (over 1mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface on external surfaces including complete removal of exixting treatment over wall and preperation of surfaces even and smooth, complete, all as specified and directed by Engr-in-charge. |
| 84 | M&Lfor preperation of new or previously untreated surface, applying two or more coats of 100% premium acrylic emulsion paint having VOC (volatile organic compound) less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm on new or previously untreated surface over 1mm thick wall care putty, complete, all as specified and as directed by Engr-in-charge. |
| 85 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 86 | Supply, Laying & testing of ductile iron pipe 100mm, including all connected fittings, class K-7, 100 mm complete all as specified and as directed. |
| 87 | S&F sluice valve flanged for class 1.6 PN 100 mm complete all as specified and as directed. |
| 88 | S&F Cast Iron air valve with two air outlet, 100 mm dia bore complete all as specified and as directed. |
| 89 | S&F GI pipes medium class 50 mm dia including all fittings complete all as specified and as directed. |
| 90 | S&F GI pipes medium class 40 mm dia including all fittings complete all as specified and as directed. |
| 91 | S&F GI pipes medium class 25 mm dia including all fittings complete all as specified and as directed. |
| 92 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 50 mm bore din of pipe including taking down old existing unserviceable gate valve complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 40 mm bore din of pipe including taking down old existing unserviceable gate valve complete all as specified and directed by Engr-in-Charge |
| 94 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 25 mm bore din of pipe including taking down old existing unserviceable gate valve complete all as specified and directed by Engr-in-Charge |
| 95 | S&F Cast Iron air valve with single air outlet, 50 mm dia bore and fixing up in cast iron water supply mains of 50 mm dia complete all as specified and as directed. |
| 96 | M&L for cutting of existing road/ hard standing/ foot path surfaces for laying water tubing and making good to disturbed surface with plain cement type B1 (1:2:4) using 20 mm graded crushed stone aggregate as in coping/ benching, slightly rounded or chamfered angles and throating, etc., including necessary formwork complete all as specified and as directed. |
| 97 | M&L for construction of VALVE PIT TYPE "A" of PCC BLOCK MASONARY and ofsize 900 mm x 900 mm x 900 mm (internal dimension), with PCC 1:3:6 type C1 solid block walling 20cm thick set in cement mortar 1:4 over 100mm thick 1:4:8 type D2 foundation and50mm thick PCC 1:2:4 type B1 coping on the top of wall with rendering 15mm thick cement mortar 1:4 on inside and exposed external surface MS sheet cover angle iron frame with locking arrangement etc. including all fittings and fixtures complete all as specified and shown in Drg. No. TD/EM/6 Sheet 1/2 including dismantling old unserviceable one. |
| 98 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings suchasswitches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 99 | Material & Labour for concealed Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI marked PVC Insulatedunsheathed multistranded copper cable, 1100 volts grade including PVC Conduit of suitable size with all fittings and accessories, and FRLSH, ISI marked PVC insulatedunsheathed single core multistranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed. |
| 100 | All as per Item No. 99 here-in-before but for one call bell point controlled by one push button switch, complete all as specified and directed. |
| 101 | All as per Item No. 99 here-in-before but for one 99/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed. |
| 102 | All as per Item No. 99 here-in-before but for one 99/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed. |
| 103 | All as per Item No. 99 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4.0 sqmm for one power point ,3 pin 15 Amps on independent board including FRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 4.00 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 104 | S&F Modular switch, one way, 6 Amps, one modulecomplete all as specified and as directed. |
| 105 | S&F Modular Bell push 6A, 1 module complete all asspecified and as directed. |
| 106 | S&F Modular socket outlet, 6 Amps, 2/3 pin, two modules combined with modular plate complete all asspecified and as directed. |
| 107 | S&F Modular socket outlet, 6/ 16 Amps, 2/3 pin, two modules combined with modular plate complete all asspecified and as directed. |
| 108 | S&F Modular switch, one way, 16 Amps, one modulecomplete all as specified and as directed. |
| 109 | Supply and fixing white cover plate with frame 3 module complete all as specified and directed. |
| 110 | Supply and fixing white cover plate with frame 6 module complete all as specified and directed. |
| 111 | Supply and fixing modular flush box/surface box 3 module complete all as specified and directed. |
| 112 | Supply and fixing modular flush box/surface box 6 module complete all as specified and directed. |
| 113 | M&L ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. |
| 114 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand. |
| 115 | Supply and fixing LED batten fitting 20 Wattfixed to wallwith 2 nos PVC block of suitable size complete all as specified and directed including taking down old unserviceable light fittings. |
| 116 | Supply and fixing LED light fitting mirror type with high output diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed including taking down old unserviceable light fittings. |
| 117 | S&F lamp holder, insulated body, with back plate for batten fittingincluding one LED lamp 7 Watt B22 base Color Temp 6500 Kcomplete of. Make- Havells/anchor/Legrand. |
| 118 | S&F Bulkhead luminaries with all accessories 1X9W/10W LED including LED light driver holder connecting up with three core flexible copper conductor of suitable size including taking down old unserviceable one. Make - Havells/Phillips/Jaquar |
| 119 | Supply and fixand testing of storage type , electrically driven ,ISI Marked,water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating , AC, single phase including necessary fixing arrangements , electric and water connection complete all as specified and as directed. Make:- Make: Havells Puro Turbo product code GHWAPTTIV025 or equivalent to Bajaj/Venus/Racold |
| 120 | Supplying, fixing and testing of exhaust fan 230 volts , 250mm sweep, copper winding made of sturdy engineering plastic complete with louvers shutter including making circular holes and making good disturbed surfaces all as specified and directed by Engr-in-Charge.Make Orient/Havells/Bajaj/Crompton |
| 121 | Supplying, fixing and testing of exhaust fan 230 volts , 150mm sweep, copper winding made of steel complete with louvers shutter including making circular holes and making good disturbed surfaces complete all as specified and directed by Engr-in-Charge.Make Orient/Havells/Bajaj/Crompton |
| 122 | Supply and fixingin repairs Buildinglight LED 35 Wattincludingbracket of suitable size ansd clamps for fixing connection with three core cable 1.5 sqmm complete all as specified and and directed. Make:- Bajaj /Havells / Phillips |
| 123 | Supply and fix in repairs MCCB Distribution board, VTP&N , loadline , double door,,sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 wayfixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part NoDHDLVDRWGOFO04or equivalent in Schnieder/GE/C&S. |
| 124 | Supply and fix MCCB four pole , 415 Volt, 125 Amps,25 KA , fixed thermal & fixed magnetic setting complete all as specified and directed.Make: Havells / Schnieder/L&T/C&S. |
| 125 | Supply and fix in repairs MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 126 | Supply and fixing RCBOs double pole 32 Amps, 30 mA 240 Voltsincluding taking down old one complete all as specified and directed. |
| 127 | Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity "C" series complete all as specified and directed iIncluding taking down old one complete all as specified and directed. |
| 128 | Material and labour for concealed sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC conduit of suitable size including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed, includingtaking down unservicable one.(Note: two run of 6.0 sqmm cable ,one runof earth wire of 6.0 sqmmand one run of PVC conduit shall be measured as one length). |
| 129 | Supply and fixing to single phase temper proof digital electronicmeters with polycarbonate cover 230 Volts LCD Display 10-60 Amps, accuracy class-I 50 Hz conforming to IS 13779, IP-54 with parameters to show data, time, current reading, load,PF, voltage and KWHMake :- L&T/ Legrand/Schneider including taking down old unserviceable meters to MESstore and including connection and complete all as specified and directed. Note:- Meters obtained after taking down shall be deposited to MES store and taken into credit ledger. |
| 130 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 131 | M&L sand cushioningfor underground cable 8cm below and 15cm above the cable withclean dry riversandin trenches including spreading, levlling etc. complete all as specified and directed by Engr-in-Charge.Note:- Punned thickness only will be measured for the purpose of payment |
| 132 | Supply and laySub class"B" old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed |
| 133 | Supply and fixing or layingGI Tubing, 40 mm bore, light grade, laid under road, on pole, floor or on wall for cable protection complete all as directed. |
| 134 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip of wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core etc including taking down old unsrviceable one complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
