Provision Of Toilet At Cantonment Board Subathu Office As Per Tender Documents
Tender Value
4.30 Lakhs
Estimated cost
Bid Submission
04 Apr 2022
0 days left
EMD
8600
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
subathu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Toilet At Cantonment Board Subathu Office As Per Tender Documents
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out (hard dense soil) |
| 2 | Providing Cement concretein foundations,filling and massconcrete in ratio 1:5:10 using 40mm aggregates. |
| 3 | Providing walling of Random rubble stone masonary in CM 1:6 and brought upto course. |
| 4 | Providing 40mm thick Damp proof course tohorizontal or verticalsurfaces with cement concrete 1:2:4 includingnecessary formwork. |
| 5 | Brickwork with subclass‘B’ bricks, straight orcurved on plan exc 6mmean radius built in CM 1:6 |
| 6 | S/F Plain, solid, straight chowkatsand frames, wrought, framed rebatedon the solid, rounded or chamfered,put together with glue pinned atjoints, supplied and fixed using 2nd class hardwood. |
| 7 | S/F hold fasts using M.S. Flat 40x5mm |
| 8 | Supplying and laying ofCPVC pipes SDR 11 & PlainCPVC SDR 11 fittings onwalls/ceiling or laying infloors complete all asspecified |
| 9 | S/F Tubes 20mm, \"mediumgrad\",galvanised,with all fitting;laid in trenches |
| 10 | Providing Formwork to soffits of suspendedslabs such as roof slabs, floorslabs, landings and similar work;not exceeding 200mm thick(Horizontal or sloping) |
| 11 | Providing formwork to sides and soffits offloor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelvesincluding sup- ports, overhangs,etc. also splays between floors andbeams, etc |
| 12 | Providing Mild steel bars 10mmdia and over, cut tolength, bent to shaperequired, includingcranking, bendingspirally for hoopingfor columns, hookingends and bindingwith and includingmild steel wire(annealed) not lessthan 0.9mm dia orsecuring with clips |
| 13 | Providing Cement Concrete in ratio 1:2:4 using 20 mm aggregates in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like |
| 14 | Providing rendering 12mm thick on fair faces of concrete and is tobe finished even andsmooth (without usingextra lime or cement) in ceiling |
| 15 | Providing rendering 12mm thick on fair faces of concrete and is tobe finished even andsmooth (without usingextra lime or cement) on walls |
| 16 | S/F PVC (SWR) pipes singlesocketed, in any lengthwith rubber ring joints, laidin trenches or in floors(110mm) |
| 17 | Demolition of concrete in ground floors andpavings n exc 15 cm thickness(below or above ground level) |
| 18 | Returning, filling in, includingspreading, levelling, wateringand well ramming in layersnot exc 25 cm |
| 19 | Providing Hardcore of gauge n exc. 63mm broken stone, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surface. |
| 20 | Cement concrete type B- 2,1:4:8 (40mm gradedaggregate)in sub base 100mm thick |
| 21 | Providing Glazed ceramic tiles invertical surface 300x200x 7 mm thick set andjointed in neat cementslurry and pointed inwhite or colour cement tomatch |
| 22 | Providing Non - skid Ceramic tiles 7 to8 mm thick area of each tileexceeding 0.18 sqm but notexceeding 0.38 sqm, infloors etc. set and jointed inneat cement slurry andpointed in white or colouredcement to match |
| 23 | S/F Stop valves/angle cock,high pressure chromiumplated with longshank and cup(concealed type) 15mm |
| 24 | S/F Bib taps, castcopper alloy,chromium plated withcrutch or butterflyhandle, screweddown, screwed foriron pipe or forbrass ferrule |
| 25 | S/F Water closet (Squatt pattern) com pleteincluding provision of lime concretebedding, vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, withintegral foot rests (excluding flushingcistern and flush pipe) |
| 26 | S/F Cera Codi make Seat One piece W.C. |
| 27 | S/F Vitreous china squatting plate urinal,white (excluding flushing cistern, flushpipe and waste pipe) |
| 28 | S/F PVC valveless, syphonicaction type, flushing cistern(10ltrs),low level, white, with inlet,ball valve, float and handleincluding brackets and flushing pipes. |
| 29 | S/F Soap dish any type fixed to plugs with chromium plated brass screws. |
| 30 | S/F Vitreous China wash basin, white, flat back, size580x450 mm taps,waste, chain and plug and porcelain stopperbut including brackets and with padestal. |
| 31 | S/F Vitreous China urinal Cera make No. 54020112 ,complete including providingand fixing plugs, bedding urinalagainst wall in cement mortar1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing around urinalback in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union fordischarge pipe. (Exclusive offixing supply pipe to flushingcistern, trap and waste pipe) |
| 32 | S/F PVC connections 15mm size with PTMTnuts of length 450mm. |
| 33 | S/F Waste fittings, brass,chromium plated for glazedware sinks, basins, etc.with long screwed shanksand fly-nuts, flange endbedded in red lead cementand other end fixed. |
| 34 | S/F Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm-45gms) |
| 35 | S/F PVC (SWR) vent cowl, 110mm |
| 36 | S/F Glazed and skeletonshutters, openrebated and preparedto receive glass,gauze, etc. using 2nd class hardwood (withoutsash bars), edges offraming plain,chamfered orrounded. fitted withcut and mitred beadsfor securing glass,etc.; sizes of me-mbersof shutters asspecified in SSR PartI, Section 8, clause8.24 (a); supplied andfitted to chowkat |
| 37 | S/F Flush shutters, solid coreconstruction, with partical board core and both faces are covered with decorative face veneer withlipping/frame to match. |
| 38 | S/F Sheet glass,ordinary qualityand glazingwith oil putty insquare or rectangle. |
| 39 | S/F Galvanised mild steel wirecloth, 0.56mm nominal dia ofwire and average width ofaperture 1.18mm and fixed withtinned tacks, or galvanised wirestaples |
| 40 | S/F Door closer hydraulicallyregulated,Aluminium(extruded section) bodydesignation No. 1universal type,suitable for doorshutters up to 700 mmin width and ofweight not morethan 35 kg. |
| 41 | S/F Aluminium anodised,barrel tower bolts of extrudedsection.(200 mm) |
| 42 | S/F Aluminium anodised,barrel tower bolts of extrudedsection.(100 mm) |
| 43 | S/F Steel locking bolts with mildsteel electrogalvanised plateand bright bolt not less than10mm dia 100mm size |
| 44 | S/F Butt hinges, mediumweight, cold rolled mildsteel. (100mm) |
| 45 | S/F Butt hinges, mediumweight, cold rolled mildsteel. (75mm) |
| 46 | S/F Extruded aluminium alloyhandles, fabricated type,anodised. (150mm) |
| 47 | S/F Extruded aluminium alloyhandles, fabricated type,anodised. (100mm) |
AI Tender Summary
Tender Timeline
Mar 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender