Construction Of Epa Activity Bal Vatika, Prarthana Sthal, Open Gym And Yatri Pritikshalay In Gp Bhallon Ka Gura, Lalpura, Jhamarkotra And Bemla ( Pmksy 2.0 ) Ps Kurabad A.Item For Open GYM 2 Surfing Board Providing and fixing of Surfing Bo, Udaipur-Rajasthan

Construction Of Epa Activity Bal Vatika, Prarthana Sthal, Open Gym And Yatri Pritikshalay In Gp Bhallon Ka Gura, Lalpura, Jhamarkotra And Bemla ( Pmksy 2.0 ) Ps Kurabad A.Item For Open GYM 2 Surfing Board Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. (The cement concrete and excavation work shall be paid separately). 3 CROSS TRAINERProviding and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB C Class G.I. Pipe. The footrests shall be made frem Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz [3:23 pm, 25/02/2022] Prasoon: nuts and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in- charge to fullfil. (The cement concrete and excavation work shall be paid separately). 4 THAI-CHISPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately). 5 SEATED PULLERProviding and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with MS. round base plate atleast 250 mm & 10mm thick. The handle frame shall be minimum of 32NB C class GL. pipe. The seat frame minimum of 32NB C class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately). 6 LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.l. pipe minimum of 80NB C class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately). 7 SIT UP BOARD DOUBLEProviding and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from C class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately). 8 CHEST PRESSProviding and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 250 mm & 10mm thick. The handle frame shall be made up from atleast 32NB C class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm X 300 mmX2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately). 9 STANDING SEATING TWISTERProviding and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB, and 25 NB shall be made from C class G.I. pipe. The handle frame of Seating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from C class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (Thecement concrete and excavation work shall be paid separate 10 CHEST CUM SHOULDER PRESS Providing and fixing of Chest Press Cum Seated Puller of size not less than 2000mm Length) x 710mm (Width) x 2200mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm X 300 mmX2mum thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately). 11 B. Items for BAL VATIKA 12 FOR SEATER MRG Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of50NBshall be made from “C” Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). 13 CIRCULAR SWING FOUR SEATER Providing and fixing ofCIRCULAR SWING FOUR SEATER of size 6.0 X 5.25 X 5.0 Feetfabricated with a Center Pipe/ Frame of65NBshall be made from “C” Class G.I. Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 65 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). 14 FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 X 2.5 Feetfabricated with a Center Pipe/ Frame of50NBshall be made from “C” Class G.I. material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). 15 HORSE / DUCK / RABET SPRINGRIDER Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feetfabricated with a Center Pipe/ Frame of40NB shall be made from “C” Class G.I. material andFRP Material The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). 16 C- Yatripartishaia 17 Earth work in excavation in foundation trenches or drains including dressingof sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil as directed within a lead of 50 Mtr. 18 Hard/dense soilMixed with boulder 19 Providing and laying cement concrete including curing compaction etc complete using stone aggregate 40mm nominal size (hand broken) in foundation plinth, excluding the cot of shuttering, using. 20 1 cement :4sand : 8aggregate 21 Random Rubble stone masonry for foundation and plinth in cement sand mortar 1 : 6 (1cement : 6 sand) for above 30 cm. thick walls. 22 RCC 1:1.5:3 (1 cement : 1.5 : coarse sand : 3 graded stone aggregate 20mm nominal size) 23 Random rubble stone masonry in superstructure up to 4.5Mtr. height above plinth level in cement sand mortar 1 : 6 (1 cement : 6 sand) wall thickness above 30 Cm 24 Over Verandah Beam 25 Random rubble stone masonry in pillars up to 4.5Mtr. height above plinth level in cement sand mortar 1 : 6 (1 cement : 6 sand) wall thickness above 30 Cm 26 Centering & Shuttering with plywood or steel sheets including strutting, propping , bracing both ways and removal of form work for foundation in basements rafts, footings, strap beams, bases of columns , etc. upto plinth level. 27 Reinforced Cement Concrete work in beams, Suspended floors, Girders having slopes up to 150 ,Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain window sills, Staircases and Spiral Staircases up to floor three level includind curing, compaction, Finishing with rendering in cement sand mortar 1:3(1 Cement : 3 Coarse Sand) and making good and joints excluding the cost of centering, Shuttering and reinforcement: 28 With 1:1.5:3 (1 cement : 1.5 : coarse sand : 3 graded stone aggregate 20mm nominal size) 29 Providing & fabricating steel reinforcement for R.C.C. work including cutting , bending, placing in position and binding complete including cost of binding wire in foundations, Raft footing step Beams base of columns etc. all complete up o floor three level. 30 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 31 20mm Thick 32 Ceiling Plaster no new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 33 20mm Thick 34 Filling in plinth with River sand/Earth under floors including watering ramming consolidation and dressing complete including cost of sand/earth Lead Avg 1 Km. 35 dry stone kharanja under floor. 36 C.C. 1:3:6 with 40mm Stone aggregate under floor 37 Supply andfixingof kota stone flooring on 20mm thick in CM1:6 with filling joints CM1:3 complete. 38 White washing on new surface 39 S/F Rain Water Pipe 110 mm pvc pipe 40 D . Prayer Ground 41 Dagbelling 7.5 to 10 cm Deep Item No. 6(c) 42 Earth workexcavation in foundationincluding dressingof sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil as directed within a lead of 50 Mtr.I No 2b 43 PCC1:4:8 with 40 mm stone aggregate includingcompaction and curing etc. I No141 A 44 PCC1:2:4 with 20 mm stone aggregate includingcompaction and curing etc. I No142 A

INR 500 /-

INR 33060.0 /-

INR 16.53 Lakhs /-

Work Name : EPA ActivitiesBalvatika,Prathanasthal , Open Gym andYatripartikshalya inGram Panchayat Bhalon ka Guda, Lalpura ,Jhamarkotaand Bemala (PMKSY2.0), PS Kurabad District Udaipur.

Sl. No.	Item Description
1	A.Item For Open GYM
2	Surfing Board Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. (The cement concrete and excavation work shall be paid separately).
3	CROSS TRAINERProviding and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB "C" Class G.I. Pipe. The footrests shall be made frem Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz [3:23 pm, 25/02/2022] Prasoon: nuts and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in- charge to fullfil. (The cement concrete and excavation work shall be paid separately).
4	THAI-CHISPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately).
5	SEATED PULLERProviding and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with MS. round base plate atleast 250 mm & 10mm thick. The handle frame shall be minimum of 32NB "C" class GL. pipe. The seat frame minimum of 32NB "C" class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately).
6	LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.l. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately).
7	SIT UP BOARD DOUBLEProviding and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from "C" class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately).
8	CHEST PRESSProviding and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 250 mm & 10mm thick. The handle frame shall be made up from atleast 32NB "C" class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm X 300 mmX2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately).
9	STANDING SEATING TWISTERProviding and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB, and 25 NB shall be made from "C" class G.I. pipe. The handle frame of Seating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from "C" class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (Thecement concrete and excavation work shall be paid separate
10	CHEST CUM SHOULDER PRESS Providing and fixing of Chest Press Cum Seated Puller of size not less than 2000mm Length) x 710mm (Width) x 2200mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm X 300 mmX2mum thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately).
11	B. Items for BAL VATIKA
12	FOR SEATER MRG Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of50NBshall be made from “C” Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).
13	CIRCULAR SWING FOUR SEATER Providing and fixing ofCIRCULAR SWING FOUR SEATER of size 6.0 X 5.25 X 5.0 Feetfabricated with a Center Pipe/ Frame of65NBshall be made from “C” Class G.I. Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 65 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).
14	FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 X 2.5 Feetfabricated with a Center Pipe/ Frame of50NBshall be made from “C” Class G.I. material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).
15	HORSE / DUCK / RABET SPRINGRIDER Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feetfabricated with a Center Pipe/ Frame of40NB shall be made from “C” Class G.I. material andFRP Material The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).
16	C- Yatripartishaia
17	Earth work in excavation in foundation trenches or drains including dressingof sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil as directed within a lead of 50 Mtr.
18	Hard/dense soilMixed with boulder
19	Providing and laying cement concrete including curing compaction etc complete using stone aggregate 40mm nominal size (hand broken) in foundation plinth, excluding the cot of shuttering, using.
20	1 cement :4sand : 8aggregate
21	Random Rubble stone masonry for foundation and plinth in cement sand mortar 1 : 6 (1cement : 6 sand) for above 30 cm. thick walls.
22	RCC 1:1.5:3 (1 cement : 1.5 : coarse sand : 3 graded stone aggregate 20mm nominal size)
23	Random rubble stone masonry in superstructure up to 4.5Mtr. height above plinth level in cement sand mortar 1 : 6 (1 cement : 6 sand) wall thickness above 30 Cm
24	Over Verandah Beam
25	Random rubble stone masonry in pillars up to 4.5Mtr. height above plinth level in cement sand mortar 1 : 6 (1 cement : 6 sand) wall thickness above 30 Cm
26	Centering & Shuttering with plywood or steel sheets including strutting, propping , bracing both ways and removal of form work for foundation in basements rafts, footings, strap beams, bases of columns , etc. upto plinth level.
27	Reinforced Cement Concrete work in beams, Suspended floors, Girders having slopes up to 150 ,Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain window sills, Staircases and Spiral Staircases up to floor three level includind curing, compaction, Finishing with rendering in cement sand mortar 1:3(1 Cement : 3 Coarse Sand) and making good and joints excluding the cost of centering, Shuttering and reinforcement:
28	With 1:1.5:3 (1 cement : 1.5 : coarse sand : 3 graded stone aggregate 20mm nominal size)
29	Providing & fabricating steel reinforcement for R.C.C. work including cutting , bending, placing in position and binding complete including cost of binding wire in foundations, Raft footing step Beams base of columns etc. all complete up o floor three level.
30	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished :
31	20mm Thick
32	Ceiling Plaster no new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished :
33	20mm Thick
34	Filling in plinth with River sand/Earth under floors including watering ramming consolidation and dressing complete including cost of sand/earth Lead Avg 1 Km.
35	dry stone kharanja under floor.
36	C.C. 1:3:6 with 40mm Stone aggregate under floor
37	Supply andfixingof kota stone flooring on 20mm thick in CM1:6 with filling joints CM1:3 complete.
38	White washing on new surface
39	S/F Rain Water Pipe 110 mm pvc pipe
40	D . Prayer Ground
41	Dagbelling 7.5 to 10 cm Deep Item No. 6(c)
42	Earth workexcavation in foundationincluding dressingof sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil as directed within a lead of 50 Mtr.I No 2b
43	PCC1:4:8 with 40 mm stone aggregate includingcompaction and curing etc. I No141 A
44	PCC1:2:4 with 20 mm stone aggregate includingcompaction and curing etc. I No142 A