Construction Of Open Gym And Bal Vatika Under Pmksy 2.0 Ps Bayana Construction providing and fixing of open gym equipment cross trainer , thi chi spinner , seated puller , leg press , chest press , sit up board double , double standing twister , standing
Tender Value
10.67 Lakhs
Estimated cost
Bid Submission
03 Apr 2022
0 days left
EMD
21355
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bayana → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Open Gym And Bal Vatika Under Pmksy 2.0 Ps Bayana Construction providing and fixing of open gym equipment cross trainer , thi chi spinner , seated puller , leg press , chest press , sit up board double , double standing twister , standing seating twister , chest cum shoulder press , push up bars , seater mrg swing , circular swing four seater , four seater seesaw , horse duck rabet spring rider ,
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | CROSS- TRAINER:Providing, and fixing of CROSS- TRAINER of size not less than1320mm (Length) x 600mm (Width) x 1750mm.(Height) to enhance the mobility of upper and lower limbs and improve the flexibility of joints.The main structure frame shall be made from G.I. pipe minimum of 80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick.The Hand Frame shall be made up of atleast 25 NB \"C\" class G.I. pipe. The footrests shall be made from Aluminium casting material of size not less than 130mm x 310mm x 5mm thickness a mounted on M.S. plate of size130mm x 310mm x 5mm thick. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powdercoating shall be done with pure polysterpowders from Ackzonoble or Berger Paints with 60 to 70 micron thichness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure , under the directions of Engineer-incharge to fulfill the functional requirement.(The cement concrete and excavation work shall be paid separately) |
| 3 | THI-CHI SPINNER (2 WHEEL):-Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height) , to increase mobility of shoulder elbow and hip-knee. The main structure frame shall be made from G.I. pipe minimum of 80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick. High tensile S.S. nut bolts shall beused for assembly. The powdercoating shall be done with pure sterpowders from Ackzonoble or Berger Paints with 60 to 70 micron thichness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure , under the directions of Engineer-incharge to fulfill the tional requirement.(The cement concrete and excavation work shall be paid separately) |
| 4 | SEATED PULLER:-Providing and fixing of Seated Puller of sizenot less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardiopulmonary function. The main structure frame shall be made fromG.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick.The handle frame of 32 NB\"C\" class G.I. Pipe. The seat frame minimum of32 NB \"C\" class G.I. Pipe, closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The wder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 5 | LEG PRESS:Providing and fixing ofLEG PRESS of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick.The sleeve frame minimum of 100 OD and of M.S. seamless pipe with thickness 5 mm.This sleeve should be disassembled from main frame.The footers shall be made from casted Aluminum Material, having sizes minimum of 130 mm x 310 mm x 5 mm thick. Closing caps shall be made up of high qulity fiber reinforcemed plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The wder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 6 | CHEST PRESSProviding and fixing ofCHEST PRESS of size not less than 2000 mm (Length) x 710 mm (Width) x 2200 mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardiopulmonary function. The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick.The handle frame of 32 NB\"C\" class G.I. Pipe.The seats and back rests to be fitted on outer frames shall be made up of M.S. sheet of size not less than 330mm x 300 mm x 2 mm thickness.Closing caps shall be made up of high qulity fiber reinforcemed plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The wder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 7 | SIT UP BOARD DOUBLE:-Providing and fixing ofSIT UP BOARD DOUBLE of size not less than 1760 mm (Length) x 1140 mm (Width) x 660 mm. (Height), to enhance the Flexibility of whole body.The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick.The handle frame of 32 NB\"C\" class G.I. Pipe.The remaining frame of SIT UP BOARD minimum of 32 mm NB shall be made from \"C class G.I. pipe.The powder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 8 | DOUBLE STANDING TWISTER:-Providing and fixing of DOUBLE STANDING TWISTER of size not less than 1500 mm (Length) x 600 mm (Width)x1300mm. (Height), to enhance the Flexibility of waist.The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick.The handle frame is minimum of 25 NB shall be made from\"C\" class G.I. Pipe. The twister plate to be fitted on the bottom frame shall be made up of M.S. Round plate minimum sizeofØ 300 mm & 10mm thick. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly.The powder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 9 | STANDING SEATING TWISTER:Providing and fixing ofSTANDING SEATING TWISTER of size not less than 1700 mm (Length) x 540 mm (Width) x 1250 mm. (Height), to enhance the Flexibility of waist.suitableble for people of different agesexcept children.The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick. The bottom frame of the seating & standing twister be atleast of 32 NB, 50 NB and 25 NB shall be made from \"C\" class G.I. pipe & foot resting frame of seating side shall be made from \"C\" class G.I. pipe minimum of 25 mm NB. The twister plate to be fitted on the bottom frame shall be made up of M.S. Round plate minimum sizeofØ 300 mm & 10mm thick. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly.The powder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 10 | CHEST CUM SHOULDER PRESS:-Providing and fixing ofCHEST CUM SHOULDER PRESS of size not less than 2000 mm (Length)x710 mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder and promote cardiopulmonary function.The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick. The seat and back rests to be fitted on the outer frames shall be made up minimum of M.S. sheet of size 330 mmx 300 mmx 2 mm.thickness.Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly.The powder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 11 | PUSH UP BARS:Providing and fixing ofPUSH UP BARS of size not less than 1220 mm (Length) x 550 mm (Width) x 1700 mm. (Height), to enhance the strength and stamina of the body. The main structure frame shall be made from G.I. Pipe minimum of80 NB \"C\" class welded of M.S. road base plate atleastØ 250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from \"C\" class G.I. pipe. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly.The powder coating shall be done with pure polyester powders ofAckzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 12 | FOR SEATER MRG:Providing & fixing of for Seater MRG Swing of Size 4/5 feet (Diameter), 3 feet(Height) fabricated with a center pipe/ frame of 50 NB shall be made from \"C\" class G.I. pipe and FRP material . The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10 mm thickness. The bottom frame of 32 NB shall be made from \"C\" class G.I. pipe. The handle frame of 25 NB shall be made from \"C\" class G.I. Pipe. The foundation should be used for fixing is a structure and shall be made from centre pipe of G.I. of 50 NB \"C\" class welded with M.S. round plate of Ø 250 mm & 10 mm thick. Main pipe shall be supported with 25mm× 25 mm M.S. angles of 3 mm thickness and 20 mm × 40 mm CRC square pipes of 3 mm thickness. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powdercoating shall be done with pure polysterpowders from Ackzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 13 | CIRCULAR SWING FOUR SEATER:Providing & fixing of for CircularSwing fourof Size 6.0 × 5.25 × 5.0 feetfabricated with a center pipe/ frame of 65 NB shall be made from \"C\" class G.I. pipe and FRP material . The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10 mm thickness. The bottom frame of 32 NB shall be made from \"C\" class G.I. pipe. The handle frame of 25 NB shall be made from \"C\" class G.I. Pipe. The foundation should be used for fixing is a structure and shall be made from centre pipe of G.I. of 65NB \"C\" class welded with M.S. round plate of Ø 250 mm & 10 mm thick. Main pipe shall be supported with 25mm× 25 mm M.S. angles of 3 mm thickness and 20 mm × 40 mm CRC square pipes of 3 mm thickness. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powdercoating shall be done with pure polysterpowders from Ackzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 14 | FOUR SEATER SEE SAW:Providing & fixing of for four seater see sawof Size 5.5 ×6.25 × 2.5 feetfabricated with a center pipe/ frame of 50 NB shall be made from \"C\" class G.I. pipe and FRP material . The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10 mm thickness. The bottom frame of 32 NB shall be made from \"C\" class G.I. pipe. The handle frame of 25 NB shall be made from \"C\" class G.I. Pipe. The foundation should be used for fixing is a structure and shall be made from centre pipe of G.I. of 50 NB \"C\" class welded with M.S. round plate of Ø 250 mm & 10 mm thick. Main pipe shall be supported with 25mm× 25 mm M.S. angles of 3 mm thickness and 25 mm × 25 mm CRC square pipes of 3 mm thickness. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powdercoating shall be done with pure polysterpowders from Ackzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 15 | HORSE/ DUCK/ RABET SPRING RIDER:Providing & fixing of for HORSE/ DUCK/ RABET SPRING RIDERof Size 3.0 × 2.5 feetfabricated with a center pipe/ frame of 40 NB shall be made from \"C\" class G.I. pipe and FRP material . The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10 mm thickness. The bottom frame of 32 NB shall be made from \"C\" class G.I. pipe. The handle frame of 25 NB shall be made from \"C\" class G.I. Pipe. The foundation should be used for fixing is a structure and shall be made from centre pipe of G.I. of 40 NB \"C\" class welded with M.S. round plate of Ø 250 mm & 10 mm thick. Main pipe shall be supported with 25mm× 25 mm M.S. angles of 3 mm thickness and 25 mm × 40 mm CRC square pipes of 3 mm thickness. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powdercoating shall be done with pure polysterpowders from Ackzonoble or Berger Paints with 60 to 70 micron thichness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of Equipment etc(The cement concrete and excavation work shall be paid separately) |
| 16 | ???, ???,?????? ??? 1.5 ????? ?? ?????? ?? ????? ???? , ?? ?? ?????, ???? ?????, ??? ?? ???????, ???? ?????? ?? ???? ???????, ??? ???? ?? ??? ???? ???????? ?? ???: ?????? ?? ???? ??? ??? ??? ????? ?? 50 ???? ?? ???? ?? ????????? ???? ?????, ?????,???? ?????? ??? (BSR, GKN 2021, ITEM NO.- 2 B) |
| 17 | ?????? ??????? 1 ?????? : 2 ???? ??? 4 ?????? ?????? ?? 12 ???? ????? ??? ?? ,xzhxsV ds lkFk 1:2:4 I(BSR, GKN 2021, ITEM NO.- 16) |
AI Tender Summary
Tender Timeline
Mar 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender