Tender For Sant Tukaram Natyagruh Interior And Civil Works- 1 Providing & Fixing Gripper System Of Upvc Grippers, Standard, Cove, Mono, Edge, Butt As Required By Design & ManufactureS Specifications. Core-Fire Retardant Compressible Polyster Padding O, Aurangabad-Maharashtra

Tender For Sant Tukaram Natyagruh Interior And Civil Works- 1 Providing & Fixing Gripper System Of Upvc Grippers, Standard, Cove, Mono, Edge, Butt As Required By Design & ManufactureS Specifications. Core-Fire Retardant Compressible Polyster Padding Of 1000 Gsm / 50Mm Thick Behind Thewoodwool Board Of 20 Mm Thick, Cement Bonded , Density 400 Kg / Cum, Fire Rating Astmd 876.Size Of Wood Wood Panel 595Mm X 1195 Mm.Frame : G.I. Framing On Wallsas Per Manufacturers Specs 600 X 600 Mm C To C.Installation : Installation In Accordance With Drawings And ManufacturerS Instruction. Installation Of Grippers In Maximum Length Possible. From End-To-End Butt Joints With Hairline. Joints Locations Shall Not Be Visible In Finished Work.Install Fabric Without Wrinkles Of Folds, Maintainig Horizontal / Vertical Alignment Of Warp / Woof Of Fabric, Force Fabric Edges Into Clamping Jaws, Using Tools & Techniques That Will Not Damage Finish Of The Fabric. The Panels Shall Be Wqually Divided Vertically And Horizontally. The Equally Divided Grooves Shall Be Shown With A Gap Of12mm And The Gap Should Be Filled With Groove Filler Patti As Approved By Architect.The Rates Are Includes The Shapes, Pattern As Mentioned In The Drawing Indicating Graphics. As Per Drawings & Instructionsas Directed By Engineer In-Charge, Complete In All Aspects. ( Basic Rate For Fabric Is Rs.300.00 Sq.Mtr ) . ( Auditorium Side Wall, Back Wall, Stage Side Wall, Stage Back Wall ) 2 Providing & Fixing In Position, Acoustical Panelling Made From 12Mm Thick Agro Wood Strips Of 50, 75 7100 Mm Width On 50 X 50 Mm Sal-Wood Frame Of 600 X 600 C To C Having Supports From Wall Of Requiredlength, In Front Of 1000 Gsm Synthetic Wool 50 Mm Thick With Approved Coloured Fabric On Strips Side & Chicken Mesh On Wall Side, Including Cost Of Required Cut-Outs, Decorative Mouldings / Finishing-Items / Melamine Polish & Scaffolding, As Per Architectural & Acoustical Design & Instructions & Complete In All Aspects. Including All Materials Labour, Finishing Etc Complete ( Auditorium Side Wall, Back Wall, Stage Side Wall, Stage Back Wall ) 3 Providing & Fixing In Position, Acoustical Ceiling Made From Rigitone 8 / 18 Perforated Panels On Approved Heavy Duty G.I. Frame, Ceiling Channels At 300 C To C, & Intermediate Channels Not More Than 1200 C To C, Suspended With Hangers From Roof, In Front Of 1000 Gsm Synthetic Wool 50 Mm Thick, With Paint, Including Cost Of Required Cut-Outs, Decorative Mouldings / Finishing-Items & Scaffolding, As Per Architectural &Acoustical Design & Instructions & Complete In All Aspects Including All Materials Labour, Finishing Etc Complete 4 Providing & Fixing In Position Stage Flooring Made From 18Mm Plywood 1200 X 2400 & 18Mm Teakwood Planks 100 X 800 Having Tongue & Grove On Sal-Wood Frame Of 50 X 100 At 600Mm C To C On Stage Surface Including Cost Of Required Cut-Outs, Decorative Mouldings / Finishing-Items / Polish Etc., As Per Architectural & Acoustical Design & Instructions & Complete In All Aspects. .Including All Materials Labour, Finishing Etc Complete 5 Providing & Fixing In Position Acoustical Doors Along With 150 X 150 Mm Teak Wood Frame, Doors Made From 50Mm Teak Wood Frame 600 X600 C To C Filled With 1000 Gsm Synthetic Wool 50Mm Thick And 3Mm Tecsound From Both Sides, 12Mm Waterproof Ply & Veneer From Both Sides , Including 150Mm Heavy Duty Ss Hinges ( Geze / Dorma Or Eq. ) 4 No Each Leaf, With Door-Closer ( Dorma / Geze Or Eq. ) Including Cost Of Required Cut-Outs, Decorative Mouldings / Finishing-Items / Melamine Polish & Scaffolding As Per Architectural & Acoustical Design & Instructions & Complete In All Aspects .Including All Materials Labour, Finishing Etc Complete 6 Providing & Fixing In Position, Carpet More Than 800+ Gsm, Made With100% Stain Proof Fibres Of Approvedmake Along With 5Mm Underlay As Per Architectural & Acoustical Design & Instructions & Complete In Allaspects Including All Materials Labour, Finishing Etc Complete 7 Providing & Fixing In Position, Acoustical Panelling Made From 12Mm Wp Ply Wood & 1.5Mm Laminate On, 50 X 50 Mm Sal-Wood Frame Of 600 X 600 C To C Having Wooden Supports From Wall Of Required Length, In Front Of 1000 Gsm Synthetic Wool 50 Mm Thick With Chicken Mesh On Wall Side, Including Cost Of Required Cut-Outs, Decorative Mouldings / Finishing-Items / Paint & Scaffolding, As Per Architectural & Acousticaldesign & Instructions & Complete In All Aspects.Including All Materials Labour, Finishing Etc Complete 8 Removing Doors And Windows With Frames And Stacking The Materials As Directed With All Leads, Liftsetc. Complete. 9 Removing Cement Tiles, Or Marble Or Polished Shahabad Floor Or Dado Without Bed Concrete Including Stackingthe Materials As Directed With All Leads, Lifts Etc. Complete 10 Removing The Existing Cement Plaster Of Any Thickness Without Causing Dust Nuisance And Stacking The Debris Up To A Distance Of 50 Metres Or Spreading In The Compound And Cleaning The Site Etc.Complete. 11 Removing G.I. Or A.C. Sheet Roofing Including Purlins, Principal Rafters Etc. Including Sorting Serviceable And Unserviceable Materials, Stacking The Same As And Where Directed In The Compound Including Scaffolding Etc. Complete 12 Dismantling Brick Masonry In Lime Or Cement Mortar And Stacking The Materils As Directed With All Leads, Lifts Etc 13 Removing Brick Bat Coba Including Stacking The Spoils As Directed With All Leads, Lifts Etc, Complete. 14 Dismantling The R.C.C. Work 1:2:4 And Sorting Out The Materials Such As Steel Etc. As Directed And Stacking Them Within The Specified Lead As Directed Etc. Complete 15 Conveying Materials For A Lead Of Over 5Km. Inclusive From The Site Of Excavation To The Site Of Deposition As Directed. ( Beyond Lead 5Km ) 16 Excavation For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing Theexcavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading Asdirected, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting Etc. Complete. ( Lift Upto 3.00 M. ) By Manual Means 17 Filling In Plinth And Floors With Contractors Material / Brought From Outside And Approved By Engineer Incharge In Layers Of 15 Cm To 20 Cm Including Watering And Compaction Etc.Complete 18 Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Filling Voids With Crushedsand / Grit, Ramming, Watering Etc. Complete 19 Providing And Laying Cast In Situ / Ready Mix Cement Concrete In M15 Of Trap / Granite / Quartzite / Gneiss Metal For Bed Blocks, Foundation Blocks And Such Other Items Including Bailing Out Water, Steel Centering, Formwork, Laying / Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing Uneven And Honeycombed Surface And Curing Etc. Complete. The Cement Mortar 1:3 Plaster Is Considered For Rendering Uneven And Honeycombed Surface Only. Newly Laid Concrete Shall Be Covered By Gunny Bag, Plastic, Tarpaulin Etc. ( Wooden Centering Will Not Be Allowed. ) , With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant ( Pan Mixer ) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) 20 Providing Second Class Burnt Brick Masonry With Conventional / I.S. Type Bricks In Cement Mortar 1:6In Superstructure Including Striking Joints, Raking Out Joints, Watering Andscaffolding Etc. Complete 21 Providing Second Class Burnt Brick Masonry With Conventional / I.S. Type Bricks In Cement Mortar 1:4In Half Brick Thick Wall Including Mild Steel Longitudinal Reinforcement Of 2 Bars Of 6 Mm Diameter / 2 Hoop Iron Strips 25 Mm X 1.6 Mm Placed At Every Third Course, Properly Bent And Bonded At Ends Scaffolding, Racking Out Joints And Watering Etc. Complete 22 Providing Autoclaved Aerated Concrete Block Masonary Of Conforming To Is:2185 ( Part 3 ) - 1984 In Extrafine Jointing Mortar Of Fixoblock Of Ultratech Or Equivalent In Superstructure Including Striking Joints, Rakingout Joints And Scaffolding Etc. Complete. ( The Test Shall Be Carried Out Conforming To Is:6441 ( Part I ) - 1972 ) 23 Providing Internal Cement Plaster 20Mm. Thick In Single Coats In Cement Mortar 1:3 Withoutneeru Finish, To Concrete, Brick Surface, In All Positions Including Scaffolding And Curing Etc. Complete. 24 Providing Neeru Finish To Plastered Surfaces In All Positions Including Scaffolding And Curingetc. Complete. 25 Providing Sand Faced Plaster Externally In Cement Mortar Using Approved Screened Sand, In All Positionsincluding Base Coat Of 15 Mm Thick In Cement Mortar 1:4 Using Waterproofing Compound At1kilogramper Cement Bag Curing The Same For Not Less Than 2 Days And Keeping The Surface Of The Base Coatrough To Receive The Sand Faced Treatment 6 To 8 Mm Thick In Cement Mortar 1:4 Finishing The Surfaceby Taking Out Grains And Curing For Fourteen Days Scaffolding Etc.Complete. 26 Providing Structural Steel Work In Hollow Section Of Various Thickness And Sizes In Square, Rectanularand Round Shape From 25Mm To 450Mm Section As Per Is 4923 Yst 310 Grade Produced From Iron Ore Andblast Furnace Route Etc. As Per Detailed Designs And Drawing Or As Directed Including Cutting, Fabricating, Hoisting, Erecting, Fixing In Position, Making Riveted / Bolted / Welded Connections And Paintingcomplete. 27 Providing And Fixing Plain Zinc Sheeting Of 0.80 Mm Thick ( 22 B.W.G. ) Over The Ridge Hip Or Valley Togalvanized Iron Sheet Roofing Including All Fastening And Bolt Galvanised Iron Screws And Bolts, Lead Andbitumen Washers Etc. Complete. ( Weight Of 6.8 Kilogram / Sq.M. ) . 28 Providing And Fixing 60Mm Thick Pur Roof Panel Top Sheet 0.5Mm Ppgi / Bottom Sheet 0.4Mm Ppgi – Density: ( 38-40 ) Kg / Cum With All Accessories And Required Fixtures And Fastening Fitting Includingetc. Complete 29 Providing And Fixing Mild Steel Grill Work For Windows, Ventilators Etc. 20 Kilogram / Square Metre As Perdrawing Including Fixtures, Necessary Welding And Painting With One Coats Of Anticorrosive Paint And Twocoats Of Oil Painting Complete. 30 Providing And Fixing 40Mm Diameter And 1.5 Mm Thick Stainless Steel Hand Railing In S.S.304 Gradeincluding Fabricating , Fixtures, Errecting, Necessary Welding, Grinding, Finishing, Buffing To Stainless Steelpipe Etc. Complete 31 Providing And Fixing Solid Core Flush Door Shutter Commercial In Single Leaf 32 Mm Thick Withoutventilator Commercial Type Of Exterior Grade As Per Detailed Drawings With Wrought Iron Hold Fast, Stainless Steel Fixtures And Fastenings And Handles On Both Sides And Finishing With Oil Painting 3 Coats Complete. 32 Removing Old Paint From Steel And Other Metal Surfaces And Making The Surfaces Even With Hand Scrapping, Scaffolding Etc. Complete. 33 Providing And Applying Priming Coat Over New Wood And Wood Based Surfaces, Including Preparing Thesurface By Thoroughly Cleaning Oil, Grease, Dirt And Other Foreign Matter, Sand Papering And Knotting, Scaffolding Etc. Complete. 34 Providing And Applying Priming Coat Over New / Old Steel And Other Metal Surfaces Including Preparing Thesurface By Thoroughly Cleaning Oil, Grease, Dirt And Other Foreign Matter And Scoured With Wirebrushes, Fine Steel Wool, Scrappers And Sand Paper, Scaffolding Etc.Complete. 35 Scrapping The Old Plastered Internal Surface With Sand Paper And Coating The Entire Surface With Mixtureof Whiting Or Glue And Linseed Oil Including Scaffolding Etc. Complete As Directed. 36 Providing And Applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steelwork And Wood Work In Buildings, Including Scaffolding If Necessary, Cleaning And Preparing The Surface ( Excluding Primer Coat ) Etc. Complete 37 Providing And Applying Two Coats Of Wall Care Putty On Plastered Surface And Ceiling And Walls To Preparesurface Even And Smooth Of Approved Make, Etc Complete. 38 Providing And Applying Interior Wall Finish Luster Of Approved Make On Internal Wall Surface As Detailed Below Scrapping The Surface With Emery Paper And Wipe Clean Wall Primer With Brush With Mineral Turpentine With Brush 8 To 10% And Oil 15 To 20% With Roller And Allowing To Dry For A Period 6 To 8 Hours. Wall Putty With Appropriate Proportion Of Water Allowing To Dry For Period 4 To 6 Hours. Scrapping With Emery Paper 180 And Wipe Clean. Applyingwall Primer With Brush With Mineral Turpentine 8 To 10% And Oil 15 To 20% With Roller Scrapping Emery Paper 320 And Wipe Clean, Interior Wall Finish Luster 1St Coat With Brush / Rubber / Spray With Mineral Turpentine 7 To 9% And Oil With Roller 19 To 21% After 8 Hours Of Activity Applying 2Nd Coat Or Wall Finish Lustre With Mineral Turpentine 7 To 9 % With Brush And Oil With Roller 19 To 21% After Allowing Dry For The Period Of 6 To 8 Hours Activity 39 Providing And Applying Two Coats Of Exterior Acraylic Emulsion Paint Confirming To Corresponding I.S.Of Approved Manufacture And Of Approved Colour To The Plastered Surfaces Including Cleaning , Preparing Theplaster Surface, Applying Primer Coat , Scaffolding If Necessary , And Watering The Surface For Two Days Etccomplete 40 Providing And Laying Vitrified Matt Fininsh Tiles Having Size 590 Mm To 605 Mm X To 605 Mm Of 8 To 10 Mmthickness And Confirming Is. 15622-2006 ( Group Bla ) Of Approved Make, Shade And Pattern Forflooring In Required Position Laid On A Bed Of 1:4 Cement Morar Including Neat Cement Float, Fillingjoints, Curing And Cleaning Etc. Complete. 41 Providing And Laying Vitrified Matt Finish Tiles Having Size 590 Mm To 605 Mm X To 605 Mm Of 8 To 10 Mmthickness And Confirming Is. 15622-2006 ( Group Bla ) Of Approved Make, Shade And Pattern For Dadoand Skirting In Required Position Fixed In 1:4 Cement Mortar Including Neat Cement Float, Filling Joints, Curing And Cleaning Etc. Complete. 42 Providing And Fixing Machine Cut Machine Polished 18 Mm To 20 Mm Thick Telephone Black / Amba White / Cat Bary Brown / Rbi Red / Ocean Brown Granite Stone For Treads And Risers Of Steps And Staircases Of Approvedcolour And Shade With Full Moulding And Three Grooved Line For The Treads On Bed Of 1:4 Cement Mortarincluding Float Filling Joints With Neat Cement Slurry Curing Polishing And Cleaning Etc. Complete. 43 Providing And Laying In Position Flooring Of Telephone Black / Amba White / Cat Bary Brown / Ruby Red / Ocean Brown Granite Stone Of Approved Shade And Size 18 Mm To 20 Mm Thick On Bed 1:6 Cement Mortarincluding Cement Floats Striking Joints, Pointing In C.M. 1:3 Curing And Cleaning Etc. Complete. 44 Providing And Laying Ceramic Tiles Of Having Size 30 Cm. X 30 Cm. And Confirming To Correspondingi.S. For Dado And Skirting In Required Position With Readymade Adhesive Mortar Of Approved Quality On Plasterof 1:2 Cement Mortar Including Joint Filling With White / Colour Cement Slurry Cleaning Curing Etc. Complete. 45 Providing And Laying Antiskid Ceramic Tiles Of Approved Quality Of Size 30 Cm X 30 Cm And Confirming To Is15622-2006 ( Group-B Iia ) For Antiskid Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortarincluding Cement Float, Filling Joint With Cement Slurry Cleaning Curing Etc. Complete. 46 Providing And Fixing Heavy Duty Inter Locking Concrete Rubber Mould Glossy Pavingblocks Of 60 Millimeter Thickness Of Having A Strength Of 400 Kilogram / Sq.M Of Approved Quality Andshape On A Bed Of Crushed Sand Of 25 To 30 Millimeter Thick Including Striking Joints And Cleaning Etc.Complete. ( Using 100% Crushed Sand ) 47 Providing And Casting In Situ Or Precast Tapering R.C.C. M-20 Barrier Type Kerb Without Gutter ( As Per Irc 86 1983 ) Embedded 125Mm Below Ground Level Over M-10 Pcc Finished Neatly With C.M. 1:2, Setting The Same In C.M. 1:2, Including The Required Excavation In Any Strata And Removing The Excavated Stuff Any Where In City And Redoing The Surface As Specified And Directed By Engineering In-Charge. Using Concrete Batching And Mixing Plant 48 Providing Cement Based Water Proofing Treatment To Terraces ( Indian Water Proofing Or Alike ) With Brick Bats Laid In Required Slope To Drain The Water For Any Span After Cleaning The Base Surface. Applying A Coat Of Cement Slurry Admixed With Approved Water Proofing Compound And Laying The Brick Bats On Bottom Layer In C.M.1:5 Admixed With Approved Water Proofing Compound Filling Up To Half Depth Of Brick Bats, Curing This Layer For 3 Days, Applying Cement Slurry Over This Layer Joints Of Brick Bats With C.M.1:3 Admixed With Approved Water Proofing Compound And Finally Top Finishing With Average 20 Mm. Thick Layers Of Same Mortar Added With Jute Fiber At 1Kilogramper Bag Including Finishing The Surface Smooth With Cement Slurry Admixed With Approved Water Proofing Compound. Marking Finished Surface With False Squares Of 300Mm X 300 Mm. Making The Junctions At The Parapet Rounded And Tapered Top For Required Height, With Drip Mould At The Junction Of Plaster And Parapet And Curing And Covering 10 Years Guarantee Against Leakproofnesson Court Fee Stamp Paper Of Rs. 500 / - Including Ponding Test Etc. Complete 49 Providing And Fixing Orissa Type White Glazed Earthenware 575 Mm Water Closet Pan Including S Trap With Earthenware Foot Rests, Cast Iron Soil And Vent Pipe Upto Outside Face Of The Wall 1:2:4 Brick Bat Lime Concrete Bedding Without Flushing Tank And Its Accessories Etc. Complete. 50 Providing And Fixing White Glazed Urinal Of Series With Pressmatic Auto Closing Valve Of Having32mm Diameter P.V.C. Flush Pipe With Fitting And Flushing Of Approved Make And Arrangement Includinglead Soil Pipe, Lead Trap & Soil Pipe Connection Upto The Outside Face Of Wall Etc.Complete As Directed Byengineer In Charge. 51 Providing And Fixing Wall-Hung White Wash Basin Of Size 470X575x190mm Of Approved Make Halfpedestal, Pillar Cock, C.P.Angular Stop Cock, Long Thread Continental Including S.S. Bottle Trap Of Havingnecessary Pipe Connections Up To The Outside Face Of The Wall.Etc Complete 52 Providing And Laying In Walls / Ceilings / Floors 20 Mm Dia. Medium Grade Having Embossed As Isi Markgalvanised Iron Pipes Of 1.63 Kilogram / Metre Necessary Fitting Remaking Good The Demolished Portion With Filling Trenches And With Primer Of Anti-Corrosive Oil Paint, 2 Coats Complete. Including Necessary Scaffolding And Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same In Pwd Chowky Or As Directed Etc. Complete. 53 Providing And Laying In Walls / Ceilings / Floors 25 Mm Dia. Medium Grade Having Embossed As Isi Markgalvanised Iron Pipes Of 2.49 Kilogram / Metre Necessary Fitting Remaking Good The Demolished Portion With Filling Trenches And With Primer Of Anti-Corrosive Oil Paint , 2 Coats Complete. Including Necessary Scaffolding And Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same In Pwd Chowky Or As Directed Etc. Complete 54 Providing And Fixing 15 Mm Dia. Screw Down Bib / Stop Tap Of Brass Including Necessary Socket Union Nutcomplete. 55 Providing And Fixing 20 Mm Dia. Screw Down Bib / Stop Tap Of Brass Including Necessary Socket Union Nutcomplete. 56 Providing And Fixing 100 Mm Dia Stabiliser Pipe / P.V.C. Soil Vent / Waste Pipe And With Necessaryfixtures And Fitting Such As Bends, Tees, Single Junctions, Slotted Vent, Clamps Etc. 57 Providing And Fixing In Position Upvc Ultra Violet Stabilized 110 Mm Outer Diameter Cowl Dome Confirming To I.S.-4985 Including Making Joints With Solvent Cement Etc. Complete 58 Providing And Fixing H.D.P Container One Piece Moulded Water Tank Made Out Of High Density Polythyler Andbuilt Corrugated Inclusive Of Delivery Up To Destination Hoisting And Fixing Of Accessories Such As Inlet, Outlet Overflow Pipe Inclusive Of All Tanks Capacity Between 200 To 1000 Liters 59 Providing , Constructing And Fixing 600 Mm Dia. Inspection Chamber Made Up Ofpolypropylene / Polyethylene Material Having 315 Mm Diameter Inlet ( S ) / Outlets And With Eccentricreducers As Per Requirement To Connect 160 Mm And 200 Mm Pipes Having Thickness Of 5 Mm And 600 Mmin Height, With Inbuilt Shaft Achieve The Invert Depth As Per Site Condition Of Wall Thickness Of 5 Mmhaving R.C.C. Cover And Frame Fixing In 150 Mm Thick In C.C.1:2:4, Having Crushed Sand Bed Of 150 Mm Thick Of Size 750 Mm Dia. Including Excavation And Refilling The Sides Of Chamber By ?Sand Crushed Cushioning 150 Mm Thickness, Connecting All Required Upvc Fittings With Rubber Lubricant Etc.Complete 60 Providing And Fixing Half Turn 25 Mm Dia Gun Metal Flushing Cock Including All Accessories Etc. Complete. 61 Providing And Fixing P.V.C. Rain Water Pipes Of 110Mm Outer Diameter And Having Wall Thickness Of2.2 To 2.7 Mm Confirming To I.S. 13592-1992 Including Proper Rainwater Receiving Recess With P.V.C. Plug, Bend, Necessary Fittings, Such As, Offsets, Shoes, Inluding Fixing The Pipe On Wall Using Approved Wooden Cleats Projecting 25Mm To 40Mm From Face Of Wall A Fixing With Clips Of Approved Quality And Number , Filingthe Joint Using Rubber Gasket With Solvent Cement And Properly Resting The Shoe Of Pipes On C.C. Ormasonry Blocks, Including Necessary Scaffolding And Maintenance For 3 Yrs For Any Leakages Or Dislocationsof Pipes. All The P.V.C. Fittings And Additional 2 Piece Socket Clips Shall Be Got Approved From Engineer Incharge Etc. Complete 62 Providing And Fixing 15 Cm Rigid Pvc Nahani Trap Including Pvc Grating, Bend, Connectingpiece Of Upvc Pipe Up To The Outside Face Of Wall , Making The Good Damaged Surfaceand Testing Etc. Complete 63 Providing , Laying And Fixing , Jointing Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes Or Of Equivalent Make, Manufacture As Per En 13476 Or Equivalent As Per I.S.15328 With Fittings Such A Bends, Tees, Coupler, Etc, Jointing With Rubber Lubricant Including Necessary Excavation, Trench Refilling With Selective Excavatedmaterial Etc. Complete. 64 Providing , Laying And Fixing , Jointing Eco- Drain 160 Mm Sn 4 Nu- Drain Upvc Pipes Or Of Equivalent Make, Manufacture As Per En 13476 Or Equivalent As Per I.S.15328 With Fittings Such A Bends, Tees , Coupler, Etc, Jointing With Rubber Lubricant Including Necessary Excavation, Trench Refilling With Selective Excavated Materialetc. Complete

INR 3000 /-

INR 287000.0 /-

INR 2.86 Crore /-

Name of Work: Sant Tukaram Natyagruh-Civil Work

Sl. No.	Item Description
1	Providing & fixing Gripper system of UPVC Grippers, standard,Cove,Mono,Edge, butt as required by design & manufacture"s specifications. CORE-Fire retardant compressible polyster padding of 1000 gsm /50mm thick behind thewoodwool board of 20 mm thick, cement bonded , density 400 kg/cum,fire rating ASTMD 876.Size of wood wood panel 595mm x 1195 mm.FRAME : G.I. framing on wallsas per manufacturers specs 600 x 600 mm c to c.INSTALLATION : Installation in accordance with drawings and manufacturer"s instruction. Installation of grippers in maximum length possible. From end-to-end butt joints with hairline. Joints locations shall not be visible in finished work.Install fabric without wrinkles of folds,maintainig horizontal/vertical alignment of warp/woof of fabric, force fabric edges into clamping jaws, using tools & techniques that will not damage finish of the fabric. The panels shall be wqually divided vertically and horizontally. The equally divided grooves shall be shown with a gap of12mm and the gap should be filled with groove filler patti as approved by architect.The rates are includes the shapes, pattern as mentioned in the drawing indicating graphics. as per drawings & instructionsas directed by Engineer In-charge, complete in all aspects.(Basic rate for Fabric is Rs.300.00 Sq.Mtr) .(Auditorium side wall, back wall, stage side wall, stage back wall)
2	Providing & Fixing in position, Acoustical Panelling made from 12mm thick Agro wood strips of 50, 75 7100 mm width on 50 x 50 mm Sal-wood frame of 600 x 600 c to c having supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with approved coloured fabric on strips side & chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / Melamine Polish & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete (Auditorium side wall, back wall, stage side wall, stage back wall)
3	Providing & Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate channels not more than 1200 c to c, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete
4	Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour,finishing etc complete
5	Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete
6	Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete
7	Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete
8	Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.
9	Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
10	Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris up to a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.
11	Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete
12	Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc
13	Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.
14	Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete
15	Conveying materials for a lead of over 5Km. inclusive from the site of excavation to the site of deposition as directed. (Beyond Lead 5km)
16	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means
17	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete
18	Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete
19	Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
20	Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
21	Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete
22	Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
23	Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.
24	Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.
25	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
26	Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
27	Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).
28	Providing and fixing 60mm thick PUR Roof panel Top sheet 0.5mm PPGI/Bottom sheet 0.4mm PPGI – Density: (38-40)Kg/cum with all accessories and required fixtures and fastening fitting includingetc. complete
29	Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
30	Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete
31	Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.
32	Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete.
33	Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete.
34	Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete.
35	Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.
36	Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete
37	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
38	Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity
39	Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete
40	Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.
41	Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.
42	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
43	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
44	Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
45	Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
46	Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)
47	Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
48	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete
49	Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.
50	Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.
51	Providing and fixing wall-hung white wash basin of size 470x575x190mm of approved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental including S.S. bottle trap of having necessary pipe connections up to the outside face of the wall.etc complete
52	Providing and laying in walls/ceilings/floors 20 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.63 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
53	Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
54	Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
55	Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
56	Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.
57	Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete
58	Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler andbuilt corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters
59	Providing , constructing and fixing 600 mm dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 mm diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete
60	Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete.
61	Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filingthe joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete
62	Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete
63	Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.
64	Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete