Health And Family Welfare Department has published Tender For Supply Of Ortho Implant Part-3- Interference Bio Screw Size 9Mm X 35Mm ( 75% Plla & 25% Ha ) , Interference Bio Screw Size 10Mm X 20Mm ( 75% Plla & 25% Ha ) , Interference Bio Screw Size 10Mm X 25Mm ( 75% Plla & 25% Ha ) , Interference Bio S. Submission Date for this Tender is 07-04-2022. Orthodontic and Prosthodontic Equipment Tenders in Porbandar Gujarat. Bidders can get complete Tender details and download the document.
Sl. No. | Item Title | Specification |
1 | Interference Bio screw size 9mm x 35mm (75% PLLA & 25% HA) | - |
2 | Interference Bio screw size 10mm x 20mm (75% PLLA & 25% HA) | - |
3 | Interference Bio screw size 10mm x 25mm (75% PLLA & 25% HA) | - |
4 | Interference Bio screw size 10mm x 30mm (75% PLLA & 25% HA) | - |
5 | Interference Bio screw size 10mm x 35mm (75% PLLA & 25% HA) | - |
6 | Interference Bio screw size 11mm x 25mm (75% PLLA & 25% HA) | - |
7 | Interference Bio screw size 11mm x 30mm (75% PLLA & 25% HA) | - |
8 | Interference Bio screw size 11mm x 35mm (75% PLLA & 25% HA) | - |
9 | Interference Bio screw size 12mm x 35mm (75% PLLA & 25% HA) | - |
10 | Pelvic C-Clamp Set : Vario Case for Pelvic C- Clamp, With Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
11 | Pelvic C-Clamp Set : Bottom, For Vario Case Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
12 | Pelvic C-Clamp Set : Tray for Instruments for Vario Case Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
13 | Pelvic C-Clamp Set : Guide Handle for 2.5mm K-Wire Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
14 | Pelvic C-Clamp Set : Pelvic C-Clamp, Complete Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
15 | Pelvic C-Clamp Set : Pelvic C-Clamp Set : Ratchet Wrench for Nut, Hexagonal, 11.0mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
16 | Pelvic C-Clamp Set : Wire Cutter, Large, With Multiplication, Length 220mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
17 | Pelvic C-Clamp Set : Socket Wrench Ø 11.0mm With Hammer Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
18 | Pelvic C-Clamp Set : Nail for Pelvic C-Clamp, Cannulated, Short, Length 190mm, Stainless Steel ( 2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
19 | Pelvic C-Clamp Set : Nail for Pelvic C-Clamp, Cannulated, Long, Length 210mm, Stainless Steel (2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
20 | Pelvic C-Clamp Set : K - Wire Ø 2.5mm With Trocar Tip, Length 280mm, Stainless Steel, Pack of 10 Units Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
21 | Pelvic C-Clamp Set : Pliers, Flat Nosed Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
22 | Pelvic C-Clamp Set : Cap for Carbon Fiber Rods Ø 8.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
23 | Collinear Reduction Clamp Set: Insert for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
24 | Collinear Reduction Clamp Set: Collinear Reduction Clamp With Sliding Mechanism Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
25 | Collinear Reduction Clamp Set: Combination Wrench Ø 8.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
26 | Collinear Reduction Clamp Set: Hohmann-Shape Arm for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
27 | Collinear Reduction Clamp Set: Pelvic Arm for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
28 | Collinear Reduction Clamp Set: Percutaneous Arm for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
29 | Collinear Reduction Clamp Set: Bone Hook - Shape Arm for Collinesr Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
30 | Collinear Reduction Clamp Set: Combination Wrench Ø 13.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
31 | Collinear Reduction Clamp Set: K-Wire Ø 2.6mm with Spade Point Tip, Length 500mm ( 5 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
32 | Collinear Reduction Clamp Set: Spiked Disc for Pelvic Reduction Forceps Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
33 | Reduction Instruments, Large : Tray for Reduction Handles Large, Toothed & Rounded Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
34 | Reduction Instruments, Large : Lid for Modular Tray Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
35 | Reduction Instruments, Large : Guide Wire Ø 1.6mm with Threaded Tip with Trocar, Length 410mm, Stainless Steel ( 4 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
36 | Reduction Instruments, Large : Guide Wire Ø 2.8mm with Threaded Tip with Trocar, Length 300mm, Stainless Steel ( 4 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
37 | Reduction Instruments, Large : Allen Key , Angled, Ø 3.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
38 | Reduction Instruments, Large : Combination Wrench Ø 11.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
39 | Reduction Instruments, Large : Reduction Handle, Toothed for Threaded Rod Ø 5.0mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
40 | Reduction Instruments, Large : Reduction Handle, Rounded for Guide Wire Ø 2.8mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
41 | Reduction Instruments, Large : Protection Sleeve, 11.0 Slotted Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
42 | Reduction Instruments, Large : Drill Sleeve, 11.0/2.8 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
43 | Reduction Instruments, Large : Drill Sleeve, 5.0/1.6 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
44 | Reduction Instruments, Large : Drill Sleeve, 11.0/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
45 | Reduction Instruments, Large : Tap, Ø 5.0/1.6mm, Cannulated, Self Drilling, Length 195mm, Stainless Steel Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
46 | Reduction Instruments, Large : Adjusting Nut for Threaded Rod Ø 5.0mm, Stainless Steel (2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be | - |
47 | Reduction Instruments, Large : Threaded Rod, Ø 5.0mm with Self Drilling Tip, Length 380mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
48 | Reduction Instruments, Large : Threaded Rod, Ø 5.0/1.6mm, Blunt Tip, Cannulated, Length 335mm, Stainless Steel (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
49 | Reduction Instruments, Large : Combination Clamp, Clip-on Self Holding ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
50 | Reduction Instruments, Large : Carbon Fibre Rod, Ø 11.0mm, Length 250mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
51 | Reduction Instruments, Large : Carbon Fibre Rod, Ø 11.0mm, Length 350mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
52 | Reduction Instruments, Large : Peri Articular Reduction Forceps, Large with Spherical Tip Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
53 | Reduction Instruments, Small : Tray for Reduction Handles Small, Toothed & Rounded Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
54 | Reduction Instruments, Small : Lid for Modular Tray Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
55 | Reduction Instruments, Small : Guide Wire Ø 1.6mm with Threaded Tip with Trocar, Length 150mm, Stainless Steel ( 4 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
56 | Reduction Instruments, Small : Allen Key , Angled, Ø 3.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
57 | Reduction Instruments, Small : Allen Key Small , Angled, Ø 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
58 | Reduction Instruments, Small : Reduction Handle, Toothed for Threaded Rod Ø 3.0mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
59 | Reduction Instruments, Small : Reduction Handle, Rounded for Guide Wire Ø 1.6mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
60 | Reduction Instruments, Small : Protection Sleeve, 8.0 Slotted Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
61 | Reduction Instruments, Small : Drill Sleeve, 8.0/1.6 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
62 | Reduction Instruments, Small : Drill Sleeve, 8.0/3.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
63 | Reduction Instruments, Small : Adjusting Nut for Threaded Rod Ø 3.0mm, Stainless Steel (2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be | - |
64 | Reduction Instruments, Small : Threaded Rod, Ø 3.0mm with Self Drilling Tip, Length 270mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
65 | Reduction Instruments, Small : Combination Clamp Medium, Clip-on Self Holding ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
66 | Reduction Instruments, Small : Carbon Fibre Rod, Ø 8.0mm, Length 160mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
67 | Reduction Instruments, Small : Carbon Fibre Rod, Ø 8.0mm, Length 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
68 | Reduction Instruments, Small : Peri Articular Reduction Forceps, Medium with Spherical Tip Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
69 | Plate Insertion Instruments : Insert for Instrument Set for Minimally Invasive Plate Insertion Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
70 | Plate Insertion Instruments : Combination Wrench Ø 8.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
71 | Plate Insertion Instruments : Combination Wrench Ø 11.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
72 | Plate Insertion Instruments : Soft Tissue Retractor, Small, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
73 | Plate Insertion Instruments : Soft Tissue Retractor, Large, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
74 | Plate Insertion Instruments : Blade, Long, Small, for Soft Tissue Retractor, Small, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
75 | Plate Insertion Instruments : Blade, Long, Large, for Soft Tissue Retractor, Large, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
76 | Plate Insertion Instruments : Plate Holder for MIPO Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
77 | Plate Insertion Instruments : Clamping Foot for LCP 3.5 & LC - DCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
78 | Plate Insertion Instruments : Clamping Foot for Narrow LCP4.5/5.0 & for Narrow LC- DCP4.5 Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
79 | Plate Insertion Instruments : Clamping Foot for Broad LCP4.5/5.0 & for Broad LC- DCP4.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
80 | Plate Insertion Instruments : Connecting Screw for Plate Holder for MIPO Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
81 | Plate Insertion Instruments : Connecting Screw for LCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
82 | Plate Insertion Instruments : Adjusting Nut for Connecting Screw for LCP 3.5 & 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
83 | Plate Insertion Instruments : Connecting Screw for LCP 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
84 | Shoulder Instruments for Shoulder Surgery : Vario Case for General Shoulder Instruments, With Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
85 | Shoulder Instruments for Shoulder Surgery : Delta Retractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
86 | Shoulder Instruments for Shoulder Surgery : Delta Retractor, Pointed Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
87 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Delta Shaped Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
88 | Shoulder Instruments for Shoulder Surgery : Ring Retractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
89 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Narrow Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
90 | Shoulder Instruments for Shoulder Surgery : Bone Retractor, Humeral Head Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
91 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Drop Shaped Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
92 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Drop Shaped, Narrow Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
93 | Shoulder Instruments for Shoulder Surgery : Shoulder Spreader, Left Bend Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
94 | Shoulder Instruments for Shoulder Surgery : Shoulder Spreader, Right Bend Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
95 | Hohmann Retractor Holder Set : Holder for Hohmann Retractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
96 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, 30°, Curved, Left Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
97 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, 30°, Curved, Right Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
98 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, Length 220mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
99 | Hohmann Retractor Holder Set : Bone Lever, Width 18mm, Length 235mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
100 | Hohmann Retractor Holder Set : Bone Lever, Width 43mm, Length 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
101 | Hohmann Retractor Holder Set : Bone Lever, Width 70mm, Length 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
102 | Hohmann Retractor Holder Set : Bone Lever, Width 43mm, Length 235mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
103 | Hohmann Retractor Holder Set : Bone Lever, Width 22mm, Length 250mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
104 | Hohmann Retractor Holder Set : Bone Lever, Width 24mm, Length 270mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
105 | Intramedullary Reaming System : Vario Case for Intramedullary Reaming System, With Lid, Module & 2 Inserts Made of Stainless steel Grade - ISO 5832- 1 should be CE certified | - |
106 | Intramedullary Reaming System : T-Handle with Quick Coupling, Length 85mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
107 | Intramedullary Reaming System : Holding Forceps for Reaming Rod 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
108 | Intramedullary Reaming System : Removing Tool for Reamer Head Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
109 | Intramedullary Reaming System : Reaming Rod, Ø 2.5mm , Length 1150mm,3.5mm Olive ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 | - |
110 | Intramedullary Reaming System : Flexible Shaft, Ø 7.0mm, Reaming Depth to 470mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
111 | Intramedullary Reaming System : Cleaning Brush for 3.6mm Flexible Shaft, Length 600mm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
112 | Intramedullary Reaming System : Reduction Head, Straight Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
113 | Intramedullary Reaming System : Reduction Head, Displacement 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
114 | Intramedullary Reaming System : Reamer Head, Ø 8.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
115 | Intramedullary Reaming System : Reamer Head, Ø 9.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
116 | Intramedullary Reaming System : Reamer Head, Ø 9.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
117 | Intramedullary Reaming System : Reamer Head, Ø 10.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
118 | Intramedullary Reaming System : Reamer Head, Ø 10.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
119 | Intramedullary Reaming System : Reamer Head, Ø 11.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
120 | Intramedullary Reaming System : Reamer Head, Ø 11.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
121 | Intramedullary Reaming System : Reamer Head, Ø 12.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
122 | Intramedullary Reaming System : Reamer Head, Ø 12.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
123 | Intramedullary Reaming System : Reamer Head, Ø 13.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
124 | Instrument Set for the Removal of Damaged or Broken Screw : Extraction Module for 3.5mm / 4.0mm / 4.5mm Screw Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
125 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, T25, Length 100mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
126 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 3.5/4.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
127 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 3.5/4.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
128 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 3.5mm & 4.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
129 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 4.5mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
130 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 4.5mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
131 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 4.5mm & 5.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
132 | Instrument Set for the Removal of Damaged or Broken Screw : Conical Extraction Screw for 2.7mm / 3.5mm / 4.0mm Screw Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
133 | Instrument Set for the Removal of Damaged or Broken Screw : Extraction Screw for 3.5mm Screw Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
134 | Instrument Set for the Removal of Damaged or Broken Screw : Conical Extraction Screw for 4.5mm / 6.5mm Screw ( 2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
135 | Instrument Set for the Removal of Damaged or Broken Screw : T - Handle with Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
136 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Small, Ø 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
137 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Stardrive, 3.5, T15, Self Holding, for AO/ASIF Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
138 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Large, Ø 3.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
139 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Hexagonal Head 4mm, Length 100mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
140 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, T40, Length 100mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
141 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 5.0 / 6.0 / 6.5 / 7.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
142 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 5.0 / 6.0 / 6.5 / 7.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
143 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 6.0 / 6.5 / 7.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
144 | Instrument Set for the Removal of Damaged or Broken Screw : Anodized, Alluminium Plate with Application Diagram for Instrument set for the Removal of Damaged or Broken Screw Made of Stainless steel Grade - ISO 5832-1 | - |
145 | Instrument Set for the Removal of Damaged or Broken Screw : Sharp Hook, Length 155mm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
146 | Instrument Set for the Removal of Damaged or Broken Screw : Pliers for Screw Removal, Length 205mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
147 | Instrument Set for the Removal of Damaged or Broken Screw : Gouge, Width 10mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
148 | Femoral Distractor Set : Sterilizing Tray for Instrument Set for Large Distractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
149 | Femoral Distractor Set : Drill Bit, 3.5mm dia., L 195/170mm for quick coupling (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
150 | Femoral Distractor Set : Drill Sleeve 5.0/3.5, long Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
151 | Femoral Distractor Set : Drill Sleeve 6.0/5.0, long Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
152 | Femoral Distractor Set : Combination Wrench, 11mm, L 140mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
153 | Femoral Distractor Set : Pin Wrench, Dia. 4.5 mm, length 120 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
154 | Femoral Distractor Set : Universal Chuck with T-Handle, L 160mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
155 | Femoral Distractor Set : Trocar, Dia. 3.5 mm, long Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
156 | Femoral Distractor Set : Threaded Rod, 14.0mm dia., L 330mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
157 | Femoral Distractor Set : Threaded Rod, 14.0mm dia., L 480mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
158 | Femoral Distractor Set : Knurled Nut, thread 14mm dia. (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
159 | Femoral Distractor Set : Sliding Carriage with Adjusting Nut Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
160 | Femoral Distractor Set : Double Joint with Adjusting Nut Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
161 | Femoral Distractor Set : Holding Sleeve with Wing Screw, L 55mm (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
162 | Femoral Distractor Set : Holding Sleeve with Wing Screw, L 105mm (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
163 | Femoral Distractor Set : Schanz Screw, Dia. 5.0 mm, length 150/50 mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be | - |
164 | Femoral Distractor Set : Schanz Screw, Dia. 5.0 mm, length 175/50 mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be | - |
165 | Femoral Distractor Set : Schanz Screw, Dia. 5.0 mm, length 200/50 mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be | - |
166 | F - Reduction Tool : F-Tool, Large (1xBar, 3xThreaded Rod) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
167 | F - Reduction Tool : F-Tool, Small (1xBar of 335mm, 3xThreaded Rod of 128mm) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
168 | Wire Instrument Set : Sterilizing Tray for General Instrument Set Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
169 | Wire Instrument Set : Drill Bit, Dia.2.0 mm, length 100/75 mm, 2-flute, for Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
170 | Wire Instrument Set : Triple Drill Guide 2.0 with 3 holes, opposite side 1 hole Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
171 | Wire Instrument Set : Holding Forceps for Cerclage Wires, L 170mm (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
172 | Wire Instrument Set : Wire Bending Pliers, L 155mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
173 | Wire Instrument Set : Parallel Pliers, flat nosed, L 160mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
174 | Wire Instrument Set : Wire Cutter, short, L 175mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
175 | Wire Instrument Set : Wire Cutter, large, L 220mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
176 | Wire Instrument Set : Wire Passer, 45mm bending diameter Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
177 | Wire Instrument Set : Wire Passer, 70mm bending diameter Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
178 | Wire Instrument Set : Wire Tightener with handle and two pegs, L 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
179 | Wire Instrument Set : Bending Iron, for Kirschner Wires 1.25 to 2.5mm dia., L 120mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
180 | Wire Instrument Set : Wire Mount for Periprosthetic Fracture (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
181 | Wire Instrument Set : Cerclage Wire, 1.0mm dia., with eye L 280mm (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
182 | Wire Instrument Set : Cerclage Wire, 1.25mm dia., with eye L 280mm (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
183 | Wire Instrument Set : Cerclage Wire, 1.50mm dia., with eye L 280mm (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
184 | Wire Instrument Set : Wire Coil, 1.0mm dia., L 10M (10 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
185 | Wire Instrument Set : Wire Coil, 1.25mm dia., L 10M (10 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
186 | Wire Instrument Set : Wire Coil, 1.50mm dia., L 10M (10 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
187 | Wire Instrument Set : Kirschner Wire, 1.0mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
188 | Wire Instrument Set : Kirschner Wire, 1.25mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
189 | Wire Instrument Set : Kirschner Wire, 1.60mm dia., with trocar tip, L 150mm (20 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
190 | Wire Instrument Set : Kirschner Wire, 2.0mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
191 | Wire Instrument Set : Kirschner Wire, 2.5mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
192 | 2.4mm LCP Distal Radius System Instrument Set : Module for LCP Volar Distal Radius Plate 2.4, Extra Articular, with Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
193 | 2.4mm LCP Distal Radius System Instrument Set : Module for LCP Volar Distal Radius Plate 2.4, Intra Articular, with Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
194 | 2.4mm LCP Distal Radius System Instrument Set : Module for LCP Dorsal Distal Radius Plate 2.4, with Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
195 | 2.4mm LCP Distal Radius System Instrument Set : Handle for Torque Limiters 0.4/0.8/1.2 Nm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
196 | 2.4mm LCP Distal Radius System Instrument Set : Torque Limitor 0.8 Nm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
197 | 2.4mm LCP Distal Radius System Instrument Set : Pliers, Flat Nosed, Pointed, For Plates 1.0 to 2.4 Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
198 | 2.4mm LCP Distal Radius System Instrument Set : Drill Bit B 1.8 mm, with marking, length 110/85 mm, 2-flute, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
199 | 2.4mm LCP Distal Radius System Instrument Set : Drill Bit B 2.0 mm, length 100/75 mm, 2-flute, for Quick Coupling, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
200 | 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : Drill Bit B 2.4 mm, length 100/75 mm, 2-flute, for Quick Coupling, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should | - |
201 | 2.4mm LCP Distal Radius System Instrument Set : Drill Bit, 2.7mm dia., L 100/75mm for quick coupling, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
202 | 2.4mm LCP Distal Radius System Instrument Set : LCP Drill Sleeve 2.4, with Scale up to 30 mm, for Drill Bits B 1.8 mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
203 | 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : Universal Drill Guide 2.4 Made of Stainless steel Grade - ISO 5832-1 should be | - |
204 | 2.4mm LCP Distal Radius System Instrument Set : Universal Drill Guide 2.7 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
205 | 2.4mm LCP Distal Radius System Instrument Set : Depth Gauge for 2.0mm and 2.4mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
206 | 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : Depth Gauge for Screws B 2.7 to 4.0 mm, measuring range up to 60 mm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
207 | 2.4mm LCP Distal Radius System Instrument Set : Screwdriver Stardrive 2.4, Short, Self Holding, For Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
208 | 2.4mm LCP Distal Radius System Instrument Set : Screwdriver Stardrive , T8, self-holding Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
209 | 2.4mm LCP Distal Radius System Instrument Set : LCP Holding Sleeve 2.4 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
210 | 2.4mm LCP Distal Radius System Instrument Set : Reduction Forceps with points, micro handle, softlock, Length 126mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
211 | 2.4mm LCP Distal Radius System Instrument Set : Reduction Forceps with points, wide, micro handle, softlock, Length 127mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
212 | 2.4mm LCP Distal Radius System Instrument Set : Termite Forceps, finely stepped ratchet lock, weight 15g, Length 90mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
213 | 2.4mm LCP Distal Radius System Instrument Set : Periosteal Elevator, slightly curved blade, straight edge, width 3 mm, Length 187/87 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
214 | 2.4mm LCP Distal Radius System Instrument Set : Periosteal Elevator, round edge, 3mm wide, curved blade Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
215 | 2.4mm LCP Distal Radius System Instrument Set : Bone Lever, small, short narrow tip, width 6 mm, Length 160 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
216 | 2.4mm LCP Distal Radius System Instrument Set : Bending Pliers for Plates 1.5 to 2.7, Length 140 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
217 | 2.4mm LCP Distal Radius System Instrument Set : K - Wire 1.6mm with Trocar Tip, Length 150mm, Stainless Steel, Pack of 10 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
218 | 2.4mm LCP Distal Radius System Instrument Set : K - Wire 1.25mm with Trocar Tip, Length 150mm, Stainless Steel, Pack of 10 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
219 | 2.4mm LCP Distal Radius System Instrument Set : Centring Sleeve for 1.25mm K - Wire Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
220 | 2.4mm LCP Distal Radius System Instrument Set : Handle with mini quick coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
221 | 2.4mm LCP Distal Radius System Instrument Set : Screwdriver Shaft T8, self- retaining, with mini quick coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
222 | General Instrument Set : Hammer 500 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
223 | General Instrument Set : Chisel Handle Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
224 | General Instrument Set : Bone Hook, sharp, small, length 230 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
225 | General Instrument Set : Bone Hook, sharp, medium, length 230 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
226 | General Instrument Set : Bone Lever, short narrow tip, width 8 mm, length 220 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
227 | General Instrument Set : Bone Lever, short narrow tip, width 18 mm, length 235 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
228 | General Instrument Set : Bone Lever, with long, wide tip, width 24 mm, length 270 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
229 | General Instrument Set : Periosteal Elevator, curved shaft, round edge, width 14 mm, length 190/75 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
230 | General Instrument Set : Periosteal Elevator, slightly curved blade, round edge, width 6 mm, length 190/90 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
231 | General Instrument Set : Periosteal Elevator, straight shaft, round edge, width 14 mm, length 202/80 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
232 | General Instrument Set : Chisel Blade, width 10 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
233 | General Instrument Set : Chisel Blade, width 16 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
234 | General Instrument Set : Chisel Blade, width 25 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
235 | General Instrument Set : Gouge for Cancellous Bone Graft, curved, width 10 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
236 | General Instrument Set : Hammer 100 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
237 | General Instrument Set : Hammer 300 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
238 | General Instrument Set : Hammer 700 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
239 | General Instrument Set : Chisel Blade, width 5 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
240 | General Instrument Set : Periosteal Elevator, straight shaft, straight edge, width 13 mm, length 195/80 mm Made of Stainless steel Grade - ISO 5832-1 should | - |
241 | General Instrument Set : Periosteal Elevator, curved shaft, straight edge, width 13 mm, length 187/72 mm Made of Stainless steel Grade - ISO 5832-1 should | - |
242 | General Instrument Set : Periosteal Elevator, straight shaft, round edge, width 20 mm, length 202/80 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
243 | General Instrument Set : Periosteal Elevator, slightly curved blade, straight edge, width 3 mm, length 187/87 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
244 | General Instrument Set : Periosteal Elevator, slightly curved blade, straight edge, width 6 mm, length 187/87 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
245 | General Instrument Set : Gouge for Cancellous Bone Graft, straight, width 5 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
246 | General Instrument Set : Gouge for Cancellous Bone Graft, straight, width 10 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
247 | General Instrument Set : Gouge for Cancellous Bone Graft, straight, width 15 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
248 | General Instrument Set : Gouge for Cancellous Bone Graft, curved, width 5 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
249 | General Instrument Set : Gouge for Cancellous Bone Graft, curved, width 15 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
250 | General Instrument Set : Bone Hook, sharp, large, length 200 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
251 | General Instrument Set : Bone Lever, narrow tip, width 43 mm, length 240 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
252 | General Instrument Set : Bone Lever, narrow tip, width 70 mm, length 240 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
253 | General Instrument Set : Bone Lever, long blade, width 43 mm, length 235 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
254 | General Instrument Set : Bone Lever, with wide tip, width 22 mm, length 250 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
255 | General Instrument Set : Bone Lever, long narrow tip, width 18 mm, length 235 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
256 | General Instrument Set : Humeral Head Lever, length 220 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
257 | Large Fragment LCP Instrument : Torque limiting Screwdriver, Length 125 mm, for 3.5 mm Hexagonal Recess Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
258 | Large Fragment LCP Instrument : Drill bit ,3.5mm dia.(3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
259 | Large Fragment LCP Instrument : Extraction Screw , Conical for 4.5/6.5 mm screw Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
260 | Large Fragment LCP Instrument : Drill bit ,4.3 mm dia, L 221 mm (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
261 | Large Fragment LCP Instrument : Screwdriver shaft 3.5,self retainibg, L 110mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
262 | Large Fragment LCP Instrument : Threaded LCP drill guide for 4.3mm drill bit (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
263 | Large Fragment LCP Instrument : Universal drill sleeve LCP 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
264 | Large Fragment LCP Instrument : Screw holding sleeve for LCP 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
265 | Large Fragment LCP Instrument : Guide sleeve for K-Wires, 2.0 mm dia (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
266 | Large Fragment LCP Instrument : LCP bending iron for reconstruction plates (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
267 | Small Fragment LCP Instrument : Torque Limiting attchment for LCP 3.5,1.5 Nm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
268 | Small Fragment LCP Instrument : Drill bit 2.5mm dia,for metal (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
269 | Small Fragment LCP Instrument : Extraction Screw , Conical Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
270 | Small Fragment LCP Instrument : Drill bit 2.8 mmdia ,L 65 mm for Quick coupling (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
271 | Small Fragment LCP Instrument : Screwdriver shaft 2.5,L 80 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
272 | Small Fragment LCP Instrument : Screw Holding sleeve for LCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
273 | Small Fragment LCP Instrument : Threaded LCP drill guide for 2.8mm drill bit (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
274 | Small Fragment LCP Instrument : Centering sleeve for 1.25 mm K-Wire (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
275 | Small Fragment LCP Instrument : LCP bending iron for reconstruction plates (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
276 | Small Fragment LCP Instrument : Handle with Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
277 | Small Fragment LCP Instrument : Universal Drill sleeve LCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
278 | BONE CEMENT (USA FDA APPROVED),40GM,uses a 75 -15 -10 mix: 75% METHYMETHACRYLATE. | - |
279 | BONE CEMENT (USA FDA APPROVED),20GM,uses a 75 -15 -10 mix: 75% METHYMETHACRYLATE. | - |
280 | ARITHROMYCIN BONE CEMENT (USA FDA APPROVED),40GM,uses a 75 -15 -10 mix: 75% METHYMETHACRYLATE. | - |
281 | TOBRAMYCIN BONE CEMENT (USA FDA APPROVED),40GM,uses a 75 - 15 -10 mix: 75% METHYMETHACRYLATE. | - |
282 | MODULAR SHOULDER STEM WITH FINS ,SIZE:6,7,8 | - |
283 | MODULAR SHOULDER HEAD , SIZE:40X15,17,22, 40 X 15,17,20 | - |
284 | SS FLOWER SHAPE MEDIAL WALL ACETABULAR MESH WITH 3.5MM HOLES | - |
285 | 75%PLDLLA AND 25% BCP ACL FIXATION SYSTEM WITH MBCP TECHNOLOGY | - |
286 | ADJUSTABLE CORTICAL FIXATION SYSTEM FOR ACL AND PCL | - |
287 | NATURAL BONE CONTOURED FEMORAL NAIL WITH 12" OF ANTEVERSION IN PROXIMAL SCREWS, TITANIUM ALLOY, MORE THEN 10 YEARS OF CLINICAL DATA | - |
288 | PROXIMAL SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI,MORE THEN 10 Y OF CLINICAL DATA | - |
289 | DISTAL SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI, MORE THEN 10 Y OF CLINICAL DATA | - |
290 | END CAP FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI | - |
291 | 4 ANTERIOR BEND AND ANATOMIC DELTA CROSS SECTION TIBIA NAIL WITH TRANSVERSE PROXIMAL LOCKING HOLE , TITANIUM ALLOY TI6AL4VI, MORE THEN 15 YEARS OF CLINICAL DATA | - |
292 | SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI, MORE THEN 10 YEARS OF CLINICAL DATA | - |
293 | END CAP FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI | - |
294 | 4" PROXIMAL LATERIZATION ANGLE AND 15" ANTEVERSION WITH ANTERIOR BEVEL ON TIP PROXIMAL , SPIRAL FLUTE FEMORAL NAIL , TITANIUM TI6AL4VI, MORE THEN 10 Y OF CLINICAL DATA | - |
295 | PROXIMAL SCREWS WITH GROOVE FOR SET SCREW FOR ABOVE NAIL, TITANIUM ALLOY,MORE THEN 10 YOF CLINICAL DATA | - |
296 | DISTAL SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI, MORE THEN 10 Y OF CLINICAL DATA | - |
297 | END CAP FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI | - |
298 | ANATOMIC DVR PLATE WITH PRE LOADED SLEEVE, TITANIUM ALLOY, MATCH TOPOGRAPHY OF DISTAL RADIUS,ITH TOPOGRMORE THEN 10 YEARS CLINICAL DATA | - |
299 | DVR PLATE LOCKING PEG TTIANIUM ALLOY, MORE THEN 10 YEARS CLINICAL DATA | - |
300 | DVR PLATE MULTIDIRECTION LOCKING PEG , MATERIAL : COCR, MORE THEN 10 YEARS CLINICAL DATA | - |
301 | DVR PLATE SHAFT SCREWS, MORE THEN 10YEARS CLINICAL DATA, TITANIUM ALLOY | - |
302 | 3.5MM PROXIMAL HUMERUS LATERAL LOCKING PLATE, LEFT/RIGHT, 4,6,8,12HOLE ,22Cr-13-Ni-5MN | - |
303 | 3.5MM PROXIMAL TIBIA LATERAL LOCKING PLATE, LEFT/RIGHT, 6,8,10,12 HOLE ,22Cr-13-Ni-5Mn | - |
304 | 3.5MM DISTAL TIBIA MEDIAL LOCKING PLATE, LEFT/RIGHT, 6,8,10,14 HOLE ,22Cr-13-Ni-5Mn | - |
305 | 3.5MM SELF DRILLING CANULATED METAPHYSEAL LOCKING SCREWS FOR ABOVE PLATES | - |
306 | 3.5 CONICAL LOCKING SCREW FOR ABOVE PLATES | - |
307 | 3.5MM CORTICAL SCREW FOR DUAL COMPRESSION,22Cr-13-Ni-5Mn ,FOR ABOVE PLATES | - |
308 | 5.5MM DISTAL FEMUR LATERAL LOCKING PLATE, LEFT/RIGHT, 6,10,14,18 HOLE ,22Cr-13-Ni-5Mn | - |
309 | 5.5MM SELF DRILLING CANULATED LOCKING SCREW,22Cr-13-Ni- 5Mn ,L=55,60..90MM | - |
310 | 4.5MM SHAFT LOCKING SCREW,22Cr-13-Ni-5MnL=16,18,..50MM | - |
311 | 4.5MM CORTICAL SCREW FOR DUAL COMPRESSION,22Cr-13-Ni-5Mn , L=16,18,..50MM | - |
312 | INBUILT IN FAULT DIAGNISTICS2 STATION CHARGER ,USA FDA APPROVED,220-240VOLTS | - |
313 | DRILLING/REAMING HAND PIECE , USA FDA APPROVED DRILL:825RPM, 40IN/LBS, REAMING:250RPM,105IN/LBS,DEDICATED, FORWARD/REVERSE/SAFE MODE FACILITY | - |
314 | SAGITAL SAW HAND PIECE,USA FDA APPROVED,11500CPM,NOISE LEVEL LESS THEN 73.6DB | - |
315 | TRANSFER SHIELD FOR POWER MODULE,USA FDA APPROVED | - |
316 | POWER MODULE, USA FDA APPROVED,LI-ION CHEMISTRY,12.6 VOLTS,>1.1AH CAPACITY | - |
317 | CASE FOR ABOVE SYSTEM | - |
318 | DRILLING CHUCK FOR ABOVE SYSTEM,USA FDA APPROVED, | - |
319 | REAMING CHUCK FOR ABOVE SYSTEM,USA FDA APPROVED, | - |
320 | QUICK COUPLING CHUCK FOR ABOVE SYSTEM,USA FDA | - |
321 | HUDSON MODIFIED TRINKLE CHUCK FOR ABOVE SYSSTEM,USA FDA APPROVED, | - |
322 | WIRE COLLET CHUCK FOR ABOVE SYSTEM,USA FDA APPROVED,.71 TO 1.8MM | - |
323 | PIN COLLET SMALL FOR ABOVE SYSTEM,USA FDA APPROVED,2.0 TO 3.2MM | - |
324 | PIN COLLET LARGE FOR ABOVE SYSTEM,USA FDA APPROVED,3. TO 4.2MM | - |
325 | TOTAL KNEE REPLACEMENT WITH PATELA | - |
326 | TOTAL KNEE REPLACEMENT WITHOUT PATELA | - |
327 | TOTAL HIP REPLACEMENT CEMENTED | - |
328 | TOTAL HIP REPLACEMENT UNCEMENTED | - |
329 | TOTAL HIP REPLACEMENT ACETABULUM CEMENTED WITH FEMORAL STEAM UN CMENTED | - |
330 | TOTAL HIP REPLACEMENT ACETABULUM UNCEMENTED WITH FEMORAL STEAM UN CMENTED | - |