Banking and Finance Private Organizations Closing in 0 days TDR #31606207

10. Rki 2020-21 Mundiyattu Karakkal Road With Foot Path In Azhiyur Gp 10. Rki 2020-21 Mundiyattu Karakkal Road With Foot Path In Azhiyur Gp

Issued by Private Organizations · vatakara, Kerala
Tender Value
13.36 Lakhs
Estimated cost
Bid Submission
04 Apr 2022
0 days left
EMD
33430
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
vatakara → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

10. Rki 2020-21 Mundiyattu Karakkal Road With Foot Path In Azhiyur Gp 10. Rki 2020-21 Mundiyattu Karakkal Road With Foot Path In Azhiyur Gp

BOQ

Work Name:RKI 2020-21 MUNDIYATTU KARAKKAL ROAD WITH FOOT PATH IN AZHIYUR GP (Sl no:53)
Sl. No. Item Description
1ROAD
23.1 : Preparation of Foundation for EmbankmentScarifying Existing Granular Surface to a Depth of 50 mm by Manual Means Scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per Technical Specification Clause 301.4.
33.14 : Construction of Subgrade and Earthen Shoulders
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
4od1706813/2021_2022 : Filling with Quarry muck<br> Filling up low and water logged areas with local material /quarry muck,spreading in layers ,levelling the top at site and consolidation by ramming etc complete for improving the CBR value of subgrade
54.11.2 : Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.
(ii) Using Gravel mix soil.
6od1706812/2021_2022 : Granular sub-base/base/surface course with local materials (Table 400.13) by mix in<br>place method normal. Construction of granular sub-base by providing local material spreading in uniform<br>layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and<br>compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per<br>Technical Specification Clause 408.(modified OD of 4.11.1)<br>
74.9 : Wet Mix Macadam
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.
By Mechanical Means with 1 km lead
875.5.5.B.2pb : Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates
Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.,including supplying and stacking of materials.
975.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
1075.5.2.3pb : Tack Coat - With Packed Bitumen Rates
Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
1175.5.2.2pb : Tack Coat - With Packed Bitumen Rates
Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
1275.9.3.pb.pa : Plastic roads- Packed Bitumen Rate
20mm thick Open-Graded Premix Carpetusing Bituminous (penetration grade/modified bitumen) Binder -
Bitumen S-65 -Packed Bitumen and Shredded Plastic

Providing, laying and rolling of opengradedpremix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregateseither using penetration grade bitumen or emulsion to required line, grade and level toserve as wearing course on a previously prepared base, using HM Plant attached withopen pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, thentransferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hotbitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rollingwith a. three wheel 80-100 kN static roller capacity, finished to required level and gradesto be- followed by seal coat of either Type A or Type B or Type C as per TechnicalSpecification Clause 508
Case - I By Manual Means

(II) Bitumen (S-65),including supplying and stacking of materials.
1375.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510
A. By Manual Means
CaseIII :Type C
(II) Bitumen (S-65),including supplying and stacking of materials.
1475.8.1 : Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)a)Materials
1511.1.1.1 : Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.I.Ordinary soil(i)Upto 3 m depth
1611.4.1.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203I.P.C.C grade M 10(i)Nominal mix 1:3:6
1711.4.2.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II.P.C.C grade M 15(i)Nominal mix (1:2.5:5)
1812.5.3 : Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204For height upto 5 m III.R.C.C grade M 20
1912.7 : Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
2075.8.1.1.A : Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)
2110.4.A.3 : Direction and Place Identification signs with size more than 0.9 sqm size board
A. Retro-reflectorised Traffic Signs
3 Providing and erecting direction and place identification retro- reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on RCC Posts 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

AI Tender Summary

OUR REF NO 31606207
AUTHORITY Private Organizations
TENDER VALUE 13.36 Lakhs
LAST DATE 04-04-2022
Authority
Authority Name Local Funds and Audit Department
Work Description 10. Rki 2020-21 Mundiyattu Karakkal Road With Foot Path In Azhiyur Gp 10. Rki 2020-21 Mundiyattu Karakkal Road With Foot Path In Azhiyur Gp
Basic Detail
Tender No 3/2022/AE/LSGD/VTKBP/2
Bidding Type Tender
Location
City vatakara
State Kerala
Key Dates
Publish Date 25 Mar 2022
Submission Date 04 Apr 2022
Open Date 08 Apr 2022
Finance
Tender Value 13.36 Lakhs
Tender Fee 2500
EMD 33430
Exemption Not Available
Document List
78cd805b-2b4e-4bf3-a43e-14c0fcf213d1.html
BOQ_696077.xls
formoftenderm.pdf
prilim.pdf
sbdm.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Mar 25, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 04, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 08, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

78cd805b-2b4e-4bf3-a43e-14c0fcf213d1.html

xls

BOQ_696077.xls

pdf

formoftenderm.pdf

pdf

prilim.pdf

pdf

sbdm.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender