Rural Development Local Bodies Closing in 0 days TDR #31605590

Pattazhy G.P 2021-22 Maintenance Of V V Lps - Panthaplavu ,P.No.257 Pattazhy G.P 2021-22 Maintenance Of V V Lps - Panthaplavu ,P.No.257

Issued by Local Bodies · pattazhy, Kerala
Tender Value
4.70 Lakhs
Estimated cost
Bid Submission
01 Apr 2022
0 days left
EMD
7060
Bank guarantee accepted
Document Fee
941
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
pattazhy → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Pattazhy G.P 2021-22 Maintenance Of V V Lps - Panthaplavu ,P.No.257 Pattazhy G.P 2021-22 Maintenance Of V V Lps - Panthaplavu ,P.No.257

BOQ

Work Name:Pattazhy G.P 2021-22 Maintenance Of V V LPS - Panthaplavu ,P.no.257
Sl. No. Item Description
1building
22.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
360.7.1 : DRYRUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
450.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
550.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
64.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
74.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
813.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
913.106 : Painting (one or more coats) with black Japan paint of approved brand andmanufacture to give an even shade.
1013.111.1 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cementpaint surface
1113.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1213.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1350.12.4.1 : Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)
14od1713735/2021_2022 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted 6mm aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
1511.20.2 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement
1611.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
178.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.
18od1675935/2021_2022 : PVC Door
1915.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
20od1655296/2021_2022 : Providing and laying on roof departmental tile(mangalore tile ) of 340 mm or nearest available size and of<br>approved size and as per approved pattern<br>
2112.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)
2212.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).
2350.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
2450.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood
2510.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2613.71 : Lettering with black Japan pint of approved brand and manufacture
2710.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
28od1709525/2021_2022 : Roofing with G I hard colour power coated traffold sheets 0,35 mm thick or nearest available thickness with overlaps of 150 mm at ends and G I hook or crank CI bolts and nuts including plain washers and bitumen washers etc. complete.
29od1709528/2021_2022 : Providing and fixing precoated galvanised steel sheet roofing acceeories 0.35 mm ( 0.05) total coated thickness,zinc coating 120 grams per sqm as per IS:m (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS: 277,in 240 mpa steel microns using self drilling / self tapping screws complete:<br>Ridges plain (500-600 mm)

AI Tender Summary

OUR REF NO 31605590
AUTHORITY Local Bodies
TENDER VALUE 4.70 Lakhs
LAST DATE 01-04-2022
Authority
Authority Name Grama Panchayat
Work Description Pattazhy G.P 2021-22 Maintenance Of V V Lps - Panthaplavu ,P.No.257 Pattazhy G.P 2021-22 Maintenance Of V V Lps - Panthaplavu ,P.No.257
Basic Detail
Tender No 1/AE/LSGD/PTZHY/2021-22
Bidding Type Tender
Location
City pattazhy
State Kerala
Key Dates
Publish Date 25 Mar 2022
Submission Date 01 Apr 2022
Open Date 06 Apr 2022
Finance
Tender Value 4.70 Lakhs
Tender Fee 941
EMD 7060
Exemption Not Available
Document List
DECLARATION.pdf
epaymentform.pdf
preagmt.pdf
Tendernotice_1.pdf
be50f0d6-d31a-4369-bad1-ea3418647ea4.html
BOQ_695495.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Mar 25, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 01, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 06, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

DECLARATION.pdf

pdf

epaymentform.pdf

pdf

preagmt.pdf

pdf

Tendernotice_1.pdf

html

be50f0d6-d31a-4369-bad1-ea3418647ea4.html

xls

BOQ_695495.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders