Repair And Routine Maintenance Of Roads Under Performance Based Maintenance Stage Contract 2022-23. Rakhi Asham, Link Road At Inderkote Arampora , Shadipora Road From Check Post Dug Mohalla, Dangerpora Panchayat Road Dangerpora, Inner Links At Shad Repai
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Apr 2022
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sumbal → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Routine Maintenance Of Roads Under Performance Based Maintenance Stage Contract 2022-23. Rakhi Asham, Link Road At Inderkote Arampora , Shadipora Road From Check Post Dug Mohalla, Dangerpora Panchayat Road Dangerpora, Inner Links At Shad Repair And Routine Maintenance Of Roads Under Performance Based Maintenance Stage Contract 2022-23. Rakhi Asham, Link Road At Inderkote Arampora , Shadipora Road From Check Post Dug Mohalla, Dangerpora Panchayat Road Dangerpora, Inner Links At Shad
BOQ
| Sl. No. | Item Description |
| 1 | Engagements of JCBfor execuation of works of various natures including disposal of excavated material. |
| 2 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) |
| 4 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be leveled and neatly dressed incld. Dewateringand disposal of excavated earth as directed Complete: All kinds of soil. |
| 6 | Filling with earth/material available at site in ditches/pot holes and stretches to make riding surface smooth. |
| 7 | Supply and filling of RBM /Quarry Muck/Stone soling of specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete |
| 8 | Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete( for Berm) |
| 9 | Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. |
| 10 | 10\"\" |
| 11 | 12\"\" |
| 12 | 14\"\" |
| 13 | 16\"\" |
| 14 | 20\"\" |
| 15 | 24\"\" |
| 16 | 28\"\" |
| 17 | 32\"\" |
| 18 | 36\"\" |
| 19 | 40\"\" |
| 20 | Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. |
| 21 | 6\"\" |
| 22 | 8\"\" |
| 23 | 10\"\" |
| 24 | 12\"\" |
| 25 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 26 | Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 27 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) 100mm compacted thickness |
| 28 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) 75mm compacted thickness |
| 29 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) 75mm compacted thickness |
| 30 | Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075 mm) to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, transporting the mix material by mechanical transport from the plant upto the site of work, laying the mixed material in uniform layers with mechanical paver finisher on well prepared surface and compacting the same with vibratory roller of 8 to 10 tonne capacity to achieve the desired density / compaction as per specifications and directions of Engineer Incharge, including cost and carriage of all materials, hire charges of machinery, all taxes etc complete |
| 31 | Providing and applying of tack coat using hot straight run bitumen of grade VG 10 @ 0.5Kg / Sqm ( on Bt surface surface) including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the xisting road surface as per specification including cost and carraige of all materials upto site of work complete |
| 32 | Providing and applying of tack coat using hot straight run bitumen of grade VG 10 @ 0.75 Kg / Sqm ( on WBM / WMM surface) including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the xisting road surface as per specification including cost and carraige of all materials upto site of work complete |
| 33 | Providing and laying 50mm thick Bituminous macadam base course with stone aggregate of quarry, size and grading as specified in CPWD specifications and bitumen of grade VG 10 @ 3.3% by weight of total mix including hot mixing of stone aggregate and bitumen in Hot mix plant, transporting the mixed material from plant upto site of work and laying the mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density including cost and carriage of all the materials, hire charges of machinery, all taxes etc complete |
| 34 | Providing and Laying of 25mm thick (compacted) semi dense bituminous concrete surface using crushed stone aggregate of specified grading as per specification and bitumen of grade VG 10 @ 5% by weight of total mix including hot mixing of the stone aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by mechanical transport upto the site of work, laying the mixed material with paver finisher to required level and grade and rolling with road roller as per MORTH specification to achieve the desired compaction / density including cost and carriage of the all materials, hire charges of machinery, all taxes etc complete |
| 35 | Providing and laying 6mm thick seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 126 kgs of bitumen of Grade VG 10 bitumen per Cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface (i.e, 0.768 kg of bitumen per Sqm of road surface) including hot mixing of fine aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by Mechanical transport upto site of work, laying the mixed material with paver finisher to required level and grade, rolling with road roller to achieve desired compaction including cost and carriage of all the materials, hire charges of machinery, all taxes etc complete |
| 36 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 37 | P/L in position cement concrete in1 : 4 : 8(1 cement : 4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 38 | P/L in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 39 | P/L in position cement concrete in1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 40 | P/L in position reinforced cement concrete in 1 : 2 : 4 (1 cement:2 course sand: 4 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. |
| 41 | P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works upto plinth level) |
| 42 | P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works above plinth level upto level V) |
| 43 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more |
| 44 | Providing / Fixing of necessary farm work / shuttering including strutting, propping etc and removal of same complete |
| 45 | Foundations, footings, bases for columns |
| 46 | Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. |
| 47 | Suspended floors, roofings, landings, balcones and access plateform |
| 48 | 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
| 49 | 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
| 50 | 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
| 51 | 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. |
| 52 | 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. |
| 53 | 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. |
| 54 | 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. |
| 55 | Engagement of labour /Masdoor forclearance of drains/chocked RCC Pipes. |
| 56 | Engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees |
| 57 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 58 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive |
| 59 | Clearance of slipsdisposal lead upto 50 m and lift upto 1.5 m. |
| 60 | in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. |
| 61 | in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. |
| 62 | In soils; mixed with Decomposed Rocks; by blasting or any other means |
| 63 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 64 | White washing with lime to give an even shade :Old work (two or more coats) |
| 65 | White washing with lime to give an even shade :Old work (one or more coats) |
| 66 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work |
| 67 | Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.Old work ( One or more coats) |
| 68 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)kilometer stone as per standard design including finishing smooth in 1:3cement mortar ( 1cement : 3 fine sand) including the cost of earthwork, concrete in foundation, painting and lettering etc. .35x111x25 cm size. complete job. |
| 69 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth. |
| 70 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth. |
| 71 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. |
AI Tender Summary
Tender Timeline
Mar 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender