|
| 1 | Suppying and fitting fixing of following spare parts of the approved quality suitable for submersible pump & motor etc. as per direction of the Engg-in-charge. i) Full threaded nut and bolts 50 mm long. |
| 2 | Supplying and fitting fixing of 100 mm dia GI Elbow Bend of approved quality. |
| 3 | Making, supplying and fitting fixing of MS safety clamp of size 200x 250 x 150 mm with nuts and bolts compete as per direction of the Engg-in-charge. |
| 4 | Making, supplying and fitting fixing of MS rest clamp of size 80x 450 x 100 mm with nuts and bolts complete as per direction of the Engg-in-charge. |
| 5 | Supplying and fitting fixing of siemens/ Kirloskar/ crompton greaves make 2.0 HP X 1440 r.p.m motor suitable for 4 inch dia reduction gear box as per direction of the Engg-in-charge. |
| 6 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50Hz, 415 V, in steel sheet enclosers with Contractors and Timer etc. complete suitable for submersible pump L & T/ BCH/ ABB make as per specification and direction of the Engineer-incharge. |
| 7 | a) 25 HP/18.5 kw Relay range within 13-21 + 10% |
| 8 | b) 35 HP/26 kw Relay range within 20-32 + 10% |
| 9 | c) 50 HP/37 kw Relay range within 28-42 + 10% |
| 10 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havell\"s/BCH make etc. complete as per specification and direction of the Engineer-incharge. |
| 11 | a) 100 Amps |
| 12 | Providing and fixing C.I. sluice valves with cap complete with bolts,nuts, rubber insertions etc. ( the tail pieces if required will be paidseparately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. |
| 13 | d) 150 mm dia. (P N -1.6) |
| 14 | e) 200 mm dia. (P N -1.6) |
| 15 | f) 250 mm dia. (P N -1.6) |
| 16 | Providing and fixing CIDF Butterfly Valves with bolts, nuts, rubber insertions etc complete as per CPWD specification and direction of the Engineer- in -charge(The tail pieces, tappers etc if required will be paid seperately) |
| 17 | vii. 250 mm dia |
| 18 | viii. 300 mm dia |
| 19 | Providing and instsllation of 10,000 GPH X 76 mtrs.head water lubricated vertical submersible pump set 9 kirloskar/ Crompton / KSB / Duke / Texmo make ). With maximum 8(eight) stages coupled with required wet and non - over loading submersible motor suitable for 340=440 Volts, 3 Phase, 30 Hz, AC supply and star delta method of starting as per direction of the Engineer in charge. |
| 20 | Providing and instsllation of 15,000 GPH X 76 mtrs.head water lubricated vertical submersible pump set 9 kirloskar/ Crompton / KSB / Duke / Texmo make ). With maximum 8(eight) stages coupled with required wet and non - over loading submersible motor suitable for 340=440 Volts, 3 Phase, 30 Hz, AC supply and star delta method of starting as per direction of the Engineer in charge. |
| 21 | Providing and fixing C.I. non-return valve of approved quality asperCPWD specification and direction of the Engineer - in - charge. |
| 22 | a) 80 mm dia. |
| 23 | b) 100 mm dia. |
| 24 | c) 150 mm dia. |
| 25 | Providing and fixing DI specials as per CPWD specification and direction of the Engineer-in-charge. |
| 26 | J. D.I Flanged socketted tail piece |
| 27 | a) 150 mm dia. |
| 28 | b) 200 mm dia. |
| 29 | c) 250 mm dia. |
