Work Construction Of Public Toilet Near Govt. Hospital In Mc Mahendergarh
Tender Value
11.64 Lakhs
Estimated cost
Bid Submission
30 Mar 2022
0 days left
EMD
23280
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mahendergarh → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Construction Of Public Toilet Near Govt. Hospital In Mc Mahendergarh
BOQ
| Sl. No. | Item Description |
| 1 | 11.97.2-Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : -Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 litre/10 sqm over an und |
| 2 | 10.1.1-Re-compacting excavated soil in plinth under floors, including watering, ramming, consolidating and dressing complete. |
| 3 | 12.102.1-Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :-125 mm |
| 4 | 12.103.1-Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.:- Single rubber stopper |
| 5 | 12.98.1-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete ::-300x16 mm |
| 6 | 20.10.2-C. FIXING OF C.I. VALVES HYDRANTSExtra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works :- 100 mm i/d |
| 7 | 10.51-Providing and fixing granite stone in all shades 15mm to 18 mm thickin skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry |
| 8 | 20.20.1.1-D. LAYING OF G.I./ P.V.C./W.I. PIPES AND SPECIALSLabour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipelines and special tees, bends, sockets, elbow etc. inside building and testing etc. complete including cutting threading :- Excluding cost of specials :- 15 mm internal diametre of pipeline |
| 9 | 20.23.2-Extra for fixing and jointing union couplings in G.I. and W.I. pipelines :- 20 mm internal diameter |
| 10 | 11.97.1-Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :- Two or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of Special primer applied @ 0.75 litre /10 |
| 11 | 20.24.2-E. DRILLING AND TAPPING OF C.I. PIPESDrilling and tapping cast iron pipe lines of all diameters and screwing in ferrule and connections - Ferrule size 15 mm |
| 12 | 20.26.1-Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required :- 11.43 cm thick wall |
| 13 | 20.31.1-G. FIXING OF VALVES, COCKS, SHOWERS AND METERS ETC.Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works :- 15 mm internal diametre |
| 14 | 20.20.1.2-20 mm internal diametre of pipeline |
| 15 | 20.31.2-G. FIXING OF VALVES, COCKS, SHOWERS AND METERS ETC.Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works :- 20 mm internal diametre |
| 16 | 20.31.5-G. FIXING OF VALVES, COCKS, SHOWERS AND METERS ETC.Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works :- 40 mm internal diametre |
| 17 | 12.100-Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 18 | 20.4.1-Jointing cast iron socketed pipes, valves and specials with run lead caulked joints excluding cost of lead and yarn but including cost of labour, fuel and tools etc. Tested complete :- 80 mm i/d pipe |
| 19 | 20.4.2-Jointing cast iron socketed pipes, valves and specials with run lead caulked joints excluding cost of lead and yarn but including cost of labour, fuel and tools etc. Tested complete :- 100 mm i/d pipe |
| 20 | 20.7.3-Stringing out A.C./P.V.C pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores :- Jointing cast iron socketed pipes, valves and specials with rubber tyton joints fitted complete including cost of labour and tools etc., and tested complete :- 100 mm internal diameter of pipe line laid complete |
| 21 | 10.1-Providing and laying of base course of floors consisting of 100 mm thickcement1:8:16and100mmsandor stone filling. |
| 22 | 22.102.1- Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :-100 mm diameter |
| 23 | 22.119.2-Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. :-600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 24 | 20.20.1.5-D. LAYING OF G.I./ P.V.C./W.I. PIPES AND SPECIALSLabour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipelines and special tees, bends, sockets, elbow etc. inside building and testing etc. complete including cutting threading :- Excluding cost of specials :- 40 mm internal diametre of pipeline |
| 25 | 22.174.1-MASONRY CHAMBERSConstructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :-With common burnt clay non-modular bricks of class designation 7.5 |
| 26 | 22.23.1-Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :-W.C. pan with ISI marked white solid plastic seat and lid |
| 27 | 20.23.1-Extra for fixing and jointing union couplings in G.I. and W.I. pipelines :- 15 mm internal diameter |
| 28 | 11.6.1-15 mm cement plaster on the rough side of single or half brick wall of mix : :- 1:4 (1 cement: 4 fine sand) |
| 29 | 12.117.2-Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless |
| 30 | 12.99.1-Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete ::-300x10 mm |
| 31 | 20.24.3-E. DRILLING AND TAPPING OF C.I. PIPESDrilling and tapping cast iron pipe lines of all diameters and screwing in ferrule and connections - Ferrule size 20 mm |
| 32 | 20.30.2-Fixing galvanised malleable iron holder bats hold fasts to pipe lines fixed on walls and ceilings including all cutting to walls and making good to original condition :- 20 mm internal diameter of pipeline |
| 33 | 20.24.6-E. DRILLING AND TAPPING OF C.I. PIPESDrilling and tapping cast iron pipe lines of all diameters and screwing in ferrule and connections - Ferrule size 40 mm Note: Ferrule will be supplied without charges to the contractor, ex-divisional stores or F.O.R. nearest railway station. The fixing rate includes cartage to site of work and also cost of excavation up to the main and filling in and complete job and making good the surface after finishing the job. The rate is for complete job. |
| 34 | 11.8.1-12 mm cement plaster of mix : - 1:4 (1 cement: 4 coarse sand) |
| 35 | 20.7.1-Stringing out A.C./P.V.C pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores :- Jointing cast iron socketed pipes, valves and specials with rubber tyton joints fitted complete including cost of labour and tools etc., and tested complete :- 50mm internal diameter of pipe line laid complete |
| 36 | 20.9.1-Cutting A.C./P.V.C. pipes and specials and chipping or filing surface to a uniform finish :- 50 mm i/d |
| 37 | 20.26.2-Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required :- 22.86 cm thick wall |
| 38 | 12.118.2-Providing and fixing to existing door frames.:-30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on |
| 39 | 22.104.1- Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 40 | 12.97.6-Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete::-75x63x4 mm |
| 41 | 22.106.1-Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. :-15 mm nominal bore |
| 42 | 22.116.2-Providing and fixing PTMT Bottle Trap for Wash basin and sink. :-Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms |
| 43 | 20.9.3-Cutting A.C./P.V.C. pipes and specials and chipping or filing surface to a uniform finish :- 100 mm i/d |
| 44 | 22.40.2-Providing and fixing controlled flush, low level cistern made of vitreous chinaware with all fittings complete.:-10 litre (full flush) capacity-coloured |
| 45 | 21.39.4-Jointing and fixing salt glazed stoneware pipes and special in trenches using cement sand mortar 1:1 and best white Italian tarred hemp/yarn including finishing and trowel ling of each joint at an angle of 45 degrees with the longitudinal axis of the pipes, watering, keeping the joints covered and wetted till the same are cured, testing the sewer lines for leakages and making all leakages and defect good, complete as laid down in the contract specifications.200 mm internal diametre of sewer |
| 46 | 13.41-Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 47 | 22.103.1-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : -15 mm nominal bore |
| 48 | 22.41-Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. |
| 49 | 22.43.3-Providing and fixing in position best Indian make (as approved by the Engineer-in-charge) Bidet suite consisting of bidet suite in vitreous china ware 380 mm high and best chromium plated brass bidet fitting four holes basin mixer with pop-waste etc. complete in all respects including cutting and making good the walls and floors & painting of fittings etc.:-Mixed Colour |
| 50 | 23.21-Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required |
| 51 | 23.22.3.2-MCCB ,DISTRIBUTION BOARDS, MCB\"s, RCCB\"s, CHANGE OVER etc.Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.Supply and erection of sheet steel enclosures 2 pole/4 pole including providing SP/DP/TP/FP MCB on wall/on existing pedestal complete with necessary connections etc, :S.P.N. enclosure along with single pole MCB up to 63 amp |
| 52 | 23.3.1.1-COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS)Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.Group A |
| 53 | 20.10.1-C. FIXING OF C.I. VALVES HYDRANTSExtra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works :- 80 mm i/d |
| 54 | 20.23.5-Extra for fixing and jointing union couplings in G.I. and W.I. pipelines :- 40 mm internal diameter |
| 55 | 20.30.1-Fixing galvanised malleable iron holder bats hold fasts to pipe lines fixed on walls and ceilings including all cutting to walls and making good to original condition :- 15 mm internal diameter of pipeline |
| 56 | 20.30.5-Fixing galvanised malleable iron holder bats hold fasts to pipe lines fixed on walls and ceilings including all cutting to walls and making good to original condition :- 40 mm internal diameter of pipeline |
| 57 | 23.3.1.2-COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS)Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.Group B |
| 58 | 23.7.6.1-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work.PVC pipe of 20 mm dia. |
| 59 | 23.8.1.2-FITTING AND ACCESSORIESProviding and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.Wall socket 5 amp on existing sheet. |
| 60 | 20.6.1-Jointing cast iron socketed pipes, valves and specials with rubber tyton joints fitted complete including cost of labour and tools etc., and tested complete :- Labour cost for 80 mm joints |
| 61 | 22.103.2-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : -20 mm nominal bore |
| 62 | 9.57.2-RAIN WATER SPOUTS AND PIPES:- Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 63 | 7.20.2-Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in :- Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 64 | 6.29.3-I. CENTRING AND SHUTTERING (FORM WORK)Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and strutsMATERIAL:- B0086+B0081+B0087+B0088+LS004+LS002LABOUR:-(LB010+LB008+LS004 |
| 65 | 9.55.4-RAIN WATER SPOUTS AND PIPESSupplying and fixing in position 60 cm long G.I. pipe class ‘B’ spouts in chajjas and cantilevers40 mm internal dia40 mm internal dia |
| 66 | 6.29.1-I. CENTRING AND SHUTTERING (FORM WORK)Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columnsDetails of cost for footing size 2.7mx2.7mx1.00mContact area = 10.8 sqmMATERIAL:-As |
| 67 | 4.16.1.1-Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth ,including consolidating each deposited layer by ramming ,watering ,etc and disposing of srplus excavated soil as directed ,within a lead of 50m:All kind of soil . Pipes,cables etc not exceeding 80 meter mm dia . |
| 68 | 28.2-Providing and laying six courses water proofing treatment with bitumen felt sqmover roofs consisting of first, third and fifth course of blown bitumen 85/25 or90/15 conforming to IS : 702 applied hot @ 1 .45, 1.20 and 1.45 Kg persquare metre of area respectively, second and fourth courses of roofing felttype 3 grade I conforming to IS : 1322 (Hessian based self finished bitumenfelt) , sixth and final course of stone grit 6 mm and down size or pea sizedgravel spread at 6 cubic decimetre per sqm including preparation of surfacebut excluding grading, complete. |
| 69 | 9.17.1-ROOFING:- Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design:- IN75x75 mm deep chase |
| 70 | 23.8.1.1-FITTING AND ACCESSORIESProviding and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.Switch 5 amp. on existing sheet. |
| 71 | 23.7.1.1-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTSPVC CONDUIT and MS/GIBOX only for LIGHT/FAN/Call bell point wiring Group A |
| 72 | 6.33.3-J. STEEL REINFORCEMENTSteel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.Cold twisted barsMATERIAL:- (B0041+CA011+LS004)LABOUR:- (LB003+LB008+LS004) |
| 73 | 22.98.4-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :-40 mm nominal bore |
| 74 | 22.85.5-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.;:-Internal work - Exposed on wall :-40 mm nominal outer dia Pipes |
| 75 | 22.51.1.1-Providing and fixing soil, waste and vent pipes : - 100 mm dia: - Sand cast iron S&S pipe as per IS: 1729 |
| 76 | -Fixing cast iron or stoneware intercepting traps to be supplied by the Engineer-in- charge and embedding the same in cement concrete to the requirements of the Engineer-in-charge in screening chambers including carriage from the stores of theEngineer-in-charge.200 mm internal diameter |
| 77 | 6.2.2-Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, Plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing:-1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 78 | 9.11.1-ROOFING:- 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay non-modular brick tile of class designation 10 |
| 79 | 6.30.5-Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantileversConsider a beam of 6 m clear span, 0.50 m deep 0.30 m wide and height 3.5 m from floorMATERIAL:- (13.27+ |
| 80 | 7.22.2-B. BRICK WORK:- Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :- Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 81 | 6.16-Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the |
| 82 | 23.8.1.6-FITTING AND ACCESSORIESProviding and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.Call bell 220/230 volts musical type |
| 83 | 20.6.2-Jointing cast iron socketed pipes, valves and specials with rubber tyton joints fitted complete including cost of labour and tools etc., and tested complete :- Labour cost for 100 mm joints |
| 84 | 21.84.2-M. MASONRY CHAMBERS :- Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design :- Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) |
| 85 | 22.108.1-Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :-15mm nominal bore |
| 86 | 22.103.3-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : -25 mm nominal bore |
| 87 | 22.107.1-Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. :-15 mm nominal bore |
| 88 | 6.15.1-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of |
| 89 | 22.50.1.1.3-Providing and fixingpartitions for different type of urinals.:-Vitreous Chinaware Partition plate.:-Small size 680mm x 330 mm: - Mixed Colour |
| 90 | 6.1.6-1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)Details of cost for 1 cumMATERIAL:- (B0017+B0019+CA012+CA008+B0036+CA009+B0029CA015)LABOUR:- (LB032+LB008+LB002+PM001+PM009+LS004) |
| 91 | 23.9-Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. |
| 92 | 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform |
| 93 | 23.7.4.3-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS PVC CONDUIT and MS/GIBOX only for 3 pin 5 amp. plug point Group C |
| 94 | 23.7.4.2-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS PVC CONDUIT and MS/GIBOX only for 3 pin 5 amp. plug point Group B |
| 95 | 9.18-ROOFING:- Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 96 | 23.7.1.2-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTSPVC CONDUIT and MS/GIBOX only for LIGHT/FAN/Call bell point wiring Group B |
| 97 | 6.30.4-Centering and shuttering including strutting, propping etc. and removal of form forShelves (Cast in situ)MATERIAL:- (13.27+B0089+B0090+LS004+LS002)LABOUR:- (13.27+LB010+LB008+LS004+LS004) |
| 98 | 23.3.1.3-COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS)Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.Group C |
| 99 | 4.13.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as di |
| 100 | 23.8.1.5-FITTING AND ACCESSORIESProviding and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.Ceiling rose flush/surface type |
| 101 | 22.98.1-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :-25 mm nominal bore |
| 102 | 22.85.2-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.;:-Internal work - Exposed on wall :-20 mm nominal outer dia Pipes |
| 103 | 22.85.1-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.;:-Internal work - Exposed on wall :-15 mm nominal outer dia Pipes |
| 104 | 23.7.4.1-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS PVC CONDUIT and MS/GIBOX only for 3 pin 5 amp. plug point Group A |
| 105 | 23.7.1.3-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTSPVC CONDUIT and MS/GIBOX only for LIGHT/FAN/Call bell point wiring Group C |
| 106 | 23.22.1.1-MCCB ,DISTRIBUTION BOARDS, MCB\"s, RCCB\"s, CHANGE OVER etc.Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.Double pole MCCB 16 to 63 Amp |
| 107 | 23.12-Providing and fixing outdoor duty Ply of 8 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required |
| 108 | 23.11-FITTING AND ACCESSORIESMaking suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust sidecomplete as required |
| 109 | 22.25.5-Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :-Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern |
| 110 | 22.118-Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
AI Tender Summary
Tender Timeline
Mar 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender