Construction Of Police Station At Ransoo- Reasi By Way Of Electrification Works ( Cno. 223 ) Construction Of Police Station At Ransoo- Reasi By Way Of Electrification Works ( Cno. 223 )
Tender Value
11.55 Lakhs
Estimated cost
Bid Submission
31 Mar 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
reasi → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Police Station At Ransoo- Reasi By Way Of Electrification Works ( Cno. 223 ) Construction Of Police Station At Ransoo- Reasi By Way Of Electrification Works ( Cno. 223 )
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxetc. as required.Make:- Anchor/Indoasian/havells 0r equivalent |
| 2 | supply and fixing of 5 inch dia Fan Box / concealed box with round sheet cover for covering the base and bottom and dual painted with red oxide Make:- Anchor/Indoasian/havells 0r equivalent |
| 3 | Providing Installation testing and commissioning ofCeiling Fans of approved brands with connections etc as required Make:- Anchor/Indoasian/havells 0r equivalent |
| 4 | Supply & Fixing of additional Fan rods(LMR)Make:- Anchor/Indoasian/havells 0r equivalent |
| 5 | Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Make:- Anchor/Indoasian/havells 0r equivalent |
| 6 | Supply,installation,testing and commissioning of Ceiling LED Panel type 12 watt day milky fitting with connections as requiredMake:- Anchor/Panasonic/havells |
| 7 | Providing and fixing ofBrass Batten Holder/ Angle holder including connections as required. Make:- Anchor/Indoasian/havells 0r equivalent |
| 8 | Providing and fixing of9 watt LED BulbMake:- Anchor/orient/havells |
| 9 | Supplying and fixing of1x18 watt LED Aluminium battenfiiting 4 feet long wall /surface mounted Luminaire including connections etc as requiredMake:- Anchor/ CG /Panasonic |
| 10 | Providing and fixing of Decorative Mirror Light/ Wash Basin Lightand complete with 9 watt LED Bulb. Make:- Anchor/Indoasian/havells |
| 11 | Supply & Installation of Exhaust Fans With Metal Exhaust 300 mm(12\") in the existing opening including connections,testing commissioning etc as required Make:- Anchor/ luminous/havells 0r equivalent |
| 12 | Supply & Installation of Exhaust Fans With Stylish Plastic Exhaust 250 mm(10\") in the existing opening including connections,testing commissioning etc as requiredMake:- Anchor/ luminous/havells 0r equivalent |
| 13 | Supply and fixing ofCeiling rose on the existing junction box/wooden box including connections as required Make:- Anchor/Indoasian/havells 0r equivalent |
| 14 | Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas requiredMake:- Anchor/Indoasian/havells 0r equivalent |
| 15 | Suppl , fixing, testing & commissioning of Call Bell which includes connections etcMake:- Anchor/Indoasian/havells or equivalent |
| 16 | Supplyinglaying & making outdoor connections including aluminium lugs/THIMBLES and other jointing materials for 3.5X 95 sqmm LT Power Cable ,Almunium Conductor, ARMOURED Make:- Gloister//havells/CG |
| 17 | Supply ,instalation,fabricationTesting & commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of 2mm thick CRCA / Sheet of powder size 3X4 rft . a) 300 amp TPN A1.Bus bar with required nos of thimbles etcb)250 amp 4 pole MCCB with breaking capacity c)100 amp 4 pole change over switchd)63 amp TPN (10 nos)e)VSS meter/switch f) ASS meter/ switchMake:- Anchor/Indoasian/havells |
| 18 | Supply & Fixing of following size of medium class PVC Conduits along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduits as requiredMake:- Anchor/ CG /havells 0r equivalent |
| 19 | 25 mm |
| 20 | 40 mm |
| 21 | Supplying and fixingof following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)Make:-Hager/LEGRAND/SSK |
| 22 | 6 way (4 + 24) double door |
| 23 | Supply & Fixingfollowing sizeTPN |
| 24 | 63 amps TPNMake:- Anchor/Indoasian/Schneider |
| 25 | Supply & Fixingfollowing sizeSPN |
| 26 | 63 amps SPNMake:- Anchor/Indoasian/Schneider |
| 27 | Supplying and fixing of 5 amps to 32 amps rating 240/415 volts \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand. Make:- Hager/LEGRAND/Schneider |
| 28 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make Havells or equivalent |
| 29 | 1.0Sq. mm wire for Inverter |
| 30 | 2 x 2.5 Sqmm + 1 x 2.5 sqmm |
| 31 | 2 x 4 Sqmm + 1 x 4 sqmm |
| 32 | 4 x 10 Sqmm + 2 x 6 sqmmearth wire |
| 33 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING pointsetc. as required. |
| 34 | 6 Module (200mmX75mm) |
| 35 | 6 pin 15/16 A socket outlet&15/16 A switch |
| 36 | 5 pin 5/6 A socket outlet & 5/6 A switch |
| 37 | Supplying and fixing following 5 pin 5/6 A modularswitch /socket on the existing modular plate & swichbox including connections etc. as reqd.Make:- Anchor/Indoasian/havells 0r equivalent |
| 38 | Disposal of unwanted Mulba/ material from the site of work including Cheselling & repairing whereever required |
| 39 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 40 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
AI Tender Summary
Tender Timeline
Mar 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender