|
| 1 | (SH: Hostel Block)Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 2 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 3 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 4 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.a) Foundations and plinth |
| 5 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5mm nominal size). |
| 6 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 7 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 8 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 9 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 10 | Reinforced cement concrete work in stair casesexcept spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 11 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 12 | b) Column, pillars, posts and struts etc. |
| 13 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 14 | d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 15 | e) Stairs (excluding landings) except spiral stair cases. |
| 16 | Reinforcement of RCC work including bending, binding and placing in position complete.a) Tar/ TMT steel |
| 17 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand). |
| 18 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 19 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 20 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 21 | Providing and fixing 44 mm thick best available local wood Class - B I (19 mm batten and 25 mm bracing) battened and braced doors and windows shutters including providing and fixing necessary bright finished or black enamelled T-hinges, butt hinges, sliding door bolts, tower bolts and handles with necessary bolts and nuts and screws complete. |
| 22 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38mm thick best available local wood class - B I |
| 23 | Providing and fixing 38 mm thick wire gauge shutters using galvanized mild steel wire gauge of IS gauge designation 140G with wire of dia 0.56 mm for doors, windows and clerestory windows including anodized aluminum butt hinges with necessary screws.a) Best available local wood class B-I |
| 24 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.a) Ornamental grill. |
| 25 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 26 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.a) 300 x 10 mm |
| 27 | b) 250 x 10 mm |
| 28 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a) 125 mm for Door |
| 29 | b) 100 mm for Windows |
| 30 | Providing and fixing MS safety hasp and staple with necessary screws etc complete.a) 150 mm |
| 31 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 32 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 33 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 34 | Steel work in rallingincluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 35 | 25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 36 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.a) 21mm thick |
| 37 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.a) 0.63 mm thick GI sheet |
| 38 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.a) 0.63 mm thick GI sheet |
| 39 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 40 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.a) Best local approved quality wood |
| 41 | Extra for making chamfered edges of beading. |
| 42 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 43 | 15 mm cement plaster 1 : 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall. |
| 44 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
| 45 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 46 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 47 | Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work. |
| 48 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 49 | Painting one or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white, grey or green shades on new work to give an even shade. |
| 50 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 51 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15mm nominal bore. |
| 52 | Providing and fixing brass bib cock of approved quality.a) 15mm nominal bore. |
| 53 | Providing and fixing PVC connection pipe with brass union A) 30cm length.a) 15mm nominal bore. |
| 54 | b)20mm nominal bore. |
| 55 | Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. 100 mm dia |
| 56 | Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy.a) 15 mm dia pipe |
| 57 | b) 20 mm dia pipe |
| 58 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvansed. b) Orissa Pattern WC Pan |
| 59 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 60 | Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.a) 250 x 130 x 30 mm |
| 61 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 50 mm dia |
| 62 | Providing and fixing sand cast iron heel rest sanitary bend.a) 100 mm dia |
| 63 | a) 50 mm dia |
| 64 | Providing and fixing sand cast iron single equal plain junction of required degree.a) 100 x 100 x 100 mm |
| 65 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/Aggrigate 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cementmortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 66 | (SH: Internal Electrification)PVC insulated PVC sheated alluminium calbe of size 1.50 sqm ( 91m per coil) |
| 67 | PVC insulated PVC sheated alluminium calbe of size 2.50 sqm ( 91m per coil) |
| 68 | 5 AMP F.T. Switch |
| 69 | 5 AMP Socket with 5 AMP Switch combined |
| 70 | Brass Bracket Holder |
| 71 | Bulb head fitting |
| 72 | PVC Tape 25m x 4mm |
| 73 | Deto Fix power |
| 74 | T.P. & N main switch 100 AMP |
| 75 | S/F four pole 415 V insulator 32 AMP with existing MCDB / DB complete connection testing etc as required 4 pole 100 AMP. |
| 76 | G.I.pipe 40mm dia |
| 77 | Fan clamp. |
| 78 | Semi Round Clamp |
| 79 | Switch boardMica 200 x 250mm. |
| 80 | Switch board Mica 175 x 100mm |
| 81 | Switch board Mica 100 x 100 mm |
| 82 | Screw 1/2\", Screw 1\"1\", Screw 11/2\" |
| 83 | Ceiling rose |
| 84 | 4\" - 0\" 40 W flurocent light fitting with 40W tube light |
| 85 | AC ceiling fan 1400 mm sweep complete with regulator etc. as required |
| 86 | Earthing with GI Pipe 4.5 m long and 40mm dia i/c accessories as required. |
| 87 | Extra for using salt and charco for pipe, earth electrical etc as required |
| 88 | PVC Tee3/4\" |
| 89 | PVC Tee1\" |
| 90 | PVC Junction box 1\" |
| 91 | PVCJunction 3/4\" |
| 92 | PVC Elbow 1\" |
| 93 | PVC Elbow 3/4\" |
| 94 | Wiring for light fan point 3 pin 5 AMP / 15 AMP socket out let with 2.50 sqm and 6 sqm copper / Alu. Wire is earthing and connection etc. as required the work is to be carried out by a qualified wire man (Job work only). |
| 95 | Earthing copper plate (size 2\"/2 x \" x 5mm). |
| 96 | (SH: Septic Tank)Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more tha |
| 97 | Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 98 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 99 | Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 |
| 100 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth an |
| 101 | Reinforcement of RCC work including bending, binding and placing in position complete.a) Cold twisted bars |
| 102 | Centring and shuttering including strutting, propping etc. and removal of form work for:a) Suspended floors, roofs, landing shelve and theirsupports, balconies and chajjas (3.50m height) |
| 103 | b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 104 | 12 mm thick cement plaster 1:3( 1 cement : 3 fine sand) |
| 105 | Neat cement punning |
| 106 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.a) 40 mm thick. |
| 107 | (SH: Furniture as per yardsticks)For DormitoryWooden Cots with mosquito net stand |
| 108 | Wooden Chairs (armed) |
| 109 | Wooden Table |
| 110 | Wooden Side Table |
| 111 | For Dining, Kitchen & StoreDining Tables (5\" x 12\") |
| 112 | Dining Chair |
| 113 | Kitchen Table |
| 114 | Kitchen Meatsafe |
| 115 | Alluminium Water filter 19 ltr. Cap. |
| 116 | (SH: Boundary Wall) |
