Periodical Maintenance On Sanoi Bethwan Road In Km. 19 / 00To 41 / 00. ( Sh:- Providing / Laying Bitumen Concrete In Km. 30 / 00 To 34 / 00 ) .
Tender Value
70.95 Lakhs
Estimated cost
Bid Submission
28 Mar 2022
0 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
janjehli → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Maintenance On Sanoi Bethwan Road In Km. 19 / 00To 41 / 00. ( Sh:- Providing / Laying Bitumen Concrete In Km. 30 / 00 To 34 / 00 ) .
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of specific sizes (53mm to 22.40 mm) (fifty three millimetre to twenty two point four zero millimetre) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3- wheeled steel/vibratory roller 80-100 tonne in stages to proper grade and camber, applying and brooming, requisite type of screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 complete within all leads, lifts, carriage of material and other incidentials as per the entire satisfaction and direction of Engineer-in-Charge. |
| 2 | Providing and applying prime coat (SS-1) with Bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying prime at the rate of 0.60 kg/Sqm (zero pont six zero killogram per square metre) using mechanical means complete within all leads, lifts, carriage of material and other incidentials as per the entire satisfaction and direction of Engineer-in-Charge. |
| 3 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.With rapid setting bitumen emulsion. On bituminous surface @ 0.25kg/sqm (zero point twentyfive killogram per square metre) complete within all leads, lifts, carriage of material and other incidentials as per the entire satisfaction and direction of Engineer-in-Charge. |
| 4 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge 30 mm (thirty millimetre) compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and cement filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot MixPlant of 100-120 TPH capacity.complete within all leads, lifts, carriage of material and other incidentials as per the entire satisfaction and direction of Engineer-in-Charge. |
| 5 | Providing and applying 2.5 mm (two point five millimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.complete within all leads, lifts, carriage of material and other incidentials as per the entire satisfaction and direction of Engineer-in-Charge. |
| 6 | Providing and fixing precast reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size) kilometre stone as per standard design, including finishing smooth in 1:3 cement mortar (one cement : three fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately complete within all leads, lifts, carriage of material and other incidentials as per the entire satisfaction and direction of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Mar 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender