Smart City Development Corporation Limited has published Redevelopment Of Sports Facilities At Karna Stadium ( Phase-Ii ) Redevelopment Of Sports Facilities At Karna Stadium ( Phase-Ii ) . Submission Date for this Tender is 04-04-2022. Stadium Tenders in karnal Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Mar-2022 | Date extended. | Date | 04-04-2022 |
| Sl. No. | Item Description |
| 1 | ElectricalNS Items Providing & Installing of Gearless Passenger Elevator,Capacity 680kg/10 person,speed 1.00 meter /sec,control high performance simplex full collective control system Drive: Ac VVVF Drive for more power saving,comfort & safe ride.Stops/opening :05 Stops/05 Opening,travel 17 meters approx,Gearless Machine Shall Be Placed within the shaft(MRL),S.S Hairline Finish Cabin, PVC Flooring on heavy duty M.S. Platform, Decorative False Ceiling WithCFL/LED Lighting, Blower/Rotor motor Fan.Clear Opening 800mm wide x 2000mm Height,Car door Center Opening Automatic Door ( SS Hairline Finish) Power Supply Three Ø 415 V AC, 50 Hz +/- 5% Single Ø 230 V AC, 50 Hz +/- 5%,These Components are generally confirmed as per Indian Standard Specification for Elevators orEscalators,SPECIAL FEATURES 1. Direction arrow with digital position indicators in car and at all landing ,2. Very attractive push buttons with illuminated call registration light in car and all landings ,3. Car emergency light, emergency alarm and emergency stop operation,4. Intercom communication system from car to ground floor & machine room.,5. Voice announcing system for car,6. Full length infrared door curtain safety for auto doors,7. Automatic rescue device in case of power failure or emergency landing (ARD),8. Fireman switch safety device as per elevator & escalator act.,9. Overload warning device (OLWD). All complete fitting as directed by engineer in charge.Make required Orbis,Jhonson,Kone,Otis |
| 2 | Main LT Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, CivilFoundation cost for the panel shall be inclusive.Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 315A FP MCCB, 415 V, 50 Hz. : 2 Nos 315A 4P Contractor 415 V, 50Hz.:2 Nos With Electro Mechanical Interlocking arrangment Indication & digital metering 315TP + N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL & run contInuously throughout the width of the panel. Outgoing : 63 A, 4Pole, 50 Hz,MCB : 8 Nos. 40 A, 4Pole, 50 Hz,MCB : 4 Nos. 20 A, DPPole, 50 Hz,MCB: 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL |
| 3 | Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 3.5Cx50 sqmm AL Ar Cable |
| 4 | Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 4C x 25sqmm Al Ar cable |
| 5 | Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 16sqmm Al Ar cable |
| 6 | Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 6sqmm Al Ar cable |
| 7 | Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 3C x 4sqmm Cu Flex cable |
| 8 | Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)3C x 2.5sqmm Cu Flex cable |
| 9 | SITC of 120W LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED"s, System efficacy >100 lm / W and junction temperature < 70°C, with Ingress protection IP65, IK05, Driver surge protection 4KV, external Surge protection = 5KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with BIS certification with warranty 5 years warranty. The contractor must furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. |
| 10 | SITC of 40W LED Batten having Extruded aluminium housing fitted with Engg. Plastic end caps. With Opal diffuser.LED should be populated on FR4 PCB in which LED’s should be mounted & connection should be in series parallel.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=110lumens/watt, Minimum system Lumens 4400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI>=80, PF>=0.9,THD<10%, and Operating Temperature Range-10 deg C to +50deg C, IP20. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BCLAB SP 44L LED CW PC SD or Equivalent. |
| 11 | SITC of recessed mounted LED 600x600mm fitting made of CRCA) sheet steel housing comprising of LED’s connected in series parallel,Opal diffuser fixed in separate white powder coated ,Opal diffuser frame is held in with housing by screws for easy maintenance. Fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, ,Minimum system Lumens 3600 lm ±10%Life of fixture 50000hrs@L70 Lumen maintenance, CCT up to 5700K±300K, CRI minimum 80, PF =0.95, THD <10% and an operating Voltage Range of 140 to 277V AC. Minimum Internal Surge Protection 2.5 kV. The fixture should comply with the other parameters as per IS10322 and specifications. Bajaj Cat. Ref BZRSLL 36W LED WH i |
| 12 | Supply of LED recessed Downlighter with a nominal system lumen output of 1200 lumens ±10% and a minimum system efficacy of 100 lm/W. The luminaire should have a color temperature of 5700K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF > 0.95. Built-in Surge protection of 2 kV,Maintenance of lumen output 50000 hrs.The luminaire housing should made of pressure die cast aluminium with a high efficiency diffuser.Bajaj Cat. Ref BZSLOS nxt 12L LED WH SD |
| 13 | SITC of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no"s blades, 30 cm long down rod, 2 no"s canopies, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. |
| 14 | SITC of 300mm Light duty exhaust fan with metal blades etc complete |
| 15 | SITC of 600mm Wall mounting / Pedestal Air Circulators Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix / RR. |
| 16 | Netwrok Video Recorder (NVR)32 CHANNEL NVR 4 SATA WITH HDMI AND VGA PORTS IP VIDEO INPUT 32-CH UP TO 12 MP RESOLUTION TWO-WAY AUDIO 1-CH, RCA (2.0 VP-P, 1 K O)Network Incoming bandwidth - 320MbpsOutgoing bandwidth-256 MbpsRecording resolution:12 MP/8 MP/6 MP/5 MP/4 MP /3MP /1080p /UXGA/720p/VGA /4CIF/DCIF/2CIF/CIF/QCIFVideo & audio output: HDMI1/VGA1output resolution :HDMI1: 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 ×1440)/60Hz, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60HzHDMI2 output resolution : 1920 × 1080p/60Hz, 1280 × 1024/60Hz,1280 × 720/60Hz, 1024 × 768/60HzDecoding format: H.265+/H.265/H.264+/H.264/MPEG4Live view/ Playback: 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP /1080p /UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIFNetwork protocols: TCP/IP, DHCP, Hik- Connect, DNS, DDNS, NTP, SADP, SNMP, SMTP, NFS, iSCSI, UPnP™, HTTPS Hard disk capacity SATA: 4 sata 4 hdd Up to 8 TB capacity for each HDDNetwork interface:1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaceWorking temperature:-10 °C to 55 °C (14 °F to 131 °F)Power supply: 100 to 240 VAC 1 no. (SP 10/16A MCB)Model: HIKVISION DS-7732NI-I4 OR Equivalent |
| 17 | 2MP NETWORK BULLET CCTV1/2.8" progressive scan CMOSUp to 2.0 megapixel2.8 mm/4 mm/6 mm fixed focal lens Up to 30 m IR rangeDual streamDigital WDR (Wide Dynamic Range)3D DNR (Digital Noise Reduction)PoE (Power over Ethernet)IP67Mobile monitoring via Hik-Connect or iVMS-4500Day &Night IR cut filter with auto switchMax. Resolution: 1920 × 1080Protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,NTP, UPnP, SMTP, IGMPOperating Conditions: -30 °C to 60 °C (-22 °F to 140 °F), humidity: 95% or less (noncondensing)IR Range: Up to 30 m MAKE: HIKVISION / CP Plus |
| 18 | 2 MP Full HD WDR IR Vandal Dome Camera - 30Mtr.Feature SpecificationImage Sensor 1/2.8” 2MP Progressive scan CMOSEffective Pixels 1920(H) x 1080(V)Minimum Illumination 0.006Lux/F1.4 0.005Lux/F1.2( Color,1/3s,30IRE) 0.05Lux/F1.4 0.04Lux/F1.2(Color,1/30s,30IRE) 0Lux/F1.4(IR on, B/W)Shutter Speed Auto/Manual, 1/3~1/100000sWhite Balance Auto/Natural/Street Lamp/Outdoor/ManualLens 2.7mm~13.5mm motorized LensGain Control (AGC) Auto/ManualAngle of View H:106°~29°, V:57°~17°Video Compression H.265+/H.265/H.264+/H.264H/MJPEG (Sub Stream)Back Light Compensation BLC / HLC / WDR(120dB)S/N Ratio More than 50dBVideo Streaming 1080P (1 ~ 25/30fps) , D1/CIF(1 ~ 25/30fps) , D1/CIF(1 ~ 25/30fps)Resolution1080P(1920x1080)/SXGA(1280×1024)/1.3M(1280× 960)/720P(1280×720)/D1(704×576/704×480)/ VGA(640×480)CIF(352×288/352×240)Digital Zoom 16xMotion detection Off / On (4 Zone, Rectangle)Privacy Mask Off / On (4 Area, Rectangle)ICR Auto (ICR)/Color/B/WROI Off / On (4 Zone)Audio Input 1Ch.Audio Output 1Ch.Audio Compression G.711A;G.711Mu;G.726;AACAlarm IN 1 channel In: 5mA 5VDCAlarm Out 1 channel Out: 300mA 12VDCBit Rate H.265: 12K ~ 6400Kbps , H.264: 32K ~ 10240KbpsProtocolHTTP; HTTPs; TCP; ARP; RTSP; RTP; RTCP; UDP; SMTP; FTP; DHCP; DNS; DDNS; PPPoE; IPv4/v6;QoS; UPnP; NTP; Bonjour; IEEE 802.1x; Multicast; ICMP; IGMP; ONVIF Profile S&G, API ,TLSSmart Detection Tripwire, IntrusionEvent Trigger Motion detection, Video tampering, Scene changing, Network disconnection, IP addressconflict, Illegal access, Storage anomalyEthernet RJ-45 (10/100Base-T)User Account 20 UsersSmart Phone iPhone, iPad, Android PhoneIR IR Range of 30 Mtr. ,Smart IRMicro SD Micro SD Card128GBOperating Temperature -30°C~+60°C , Less than 95%RHPower Source DC12V, PoE (802.3af)MAKE: HIKVISION / CP PlusPower Consumption <9WCasing MetalWeatherproof Standard IP67 & IK10Dimension f122mm x 88.9mmWeight 0.4Kg |
| 19 | POE SWITECH : POWER ON ETHERNET Netgear GS110TP ProSafe 8-PortGigabit PoESmartwith 190W Power-over-Ethernet budget and 2 SFP ports for wireless converged networks, IP surveillance and mobility,2 dedicated Gigabit SFP fiber ports. Make : NETGEAR / Dlink / TP link |
| 20 | 24 PORT PATCH PANEL : NETWORK MANAGER Preferred Make : D"LINK/ NETGEAR/TPLINK |
| 21 | RACK 2U : TO MOUNT POE SWITCH HARDWARE CABLE MANAGER + FAN + 4 PORT POWER STRIP |
| 22 | LED monitor - 44 inch (Make : LG/SAMSUNG/SONY) |
| 23 | DATA TRANSMITION CAT-6 Cable Armoured with 25mm dia PVC conduits pipe with all required accessories (bends, flexble conduits, Junction box etc) |
| 24 | Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase, 50HzAC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 |
| 25 | INDOOR UNIT-CASSETTE TYPE Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeedmotor, coilsection with DX Coppercoil , electronic expansion valve, outer cabinet, drainpump, grill, necessary supports, vibration isolation, cordless remote controletc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree CDB and 19Degree CWB temperature. 3.6 TR |
| 26 | Supply, installation ,testing and commissioning of following minimum capacity VRV/VRF Highwall type Indoor unit equipped with washable syntheti cmediapre-filter,fan section with low noise fan/dynamically balanced blower, multispeed motor , coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on230V±10%, 50Hz, single phase AC supply, complete asrequired. The units hall have automatic forces hutdown provision incaseof fire onreceiving signal from BMSSystem.The cooling capacity of indoor unit will beat air inlet conditions of 27Degree C DB and 19 Degree C WB temperature. 2 TR |
| 27 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories as per specifications etc. as required : 15.86mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19mm thick insulation |
| 28 | Providing6KgFireExtinguisherMonoAmmoniumPhoshatePowder 50, Stored PressureType,PressureGauge,Grossweight9.5Kg,empty weight 3.5 Kg, CanHeight 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllabledischarge mechanism, Range minimum 4 meters, applicable on Class A,B,C andelectricallystartedFire,ARating 21A,BRating898,Canconstruction:Deepdrawn&Co.,Migwelded,valve construction : Forging and Machining, Internal Coating of Can ; Epoxy powder coating, ExternalCoatingofCan:Epoxy Polysterpower coating, sheet metal thickness:1.60MM,HeliumLeakDetectionTested,lSIandENApproved,5 yearsCapacity : 9 Litres |
| 29 | Supply Scoring apparatusFencing scoring apparatus to control the three fencing weapon with remote control, power supply unit. |
| 30 | Supply PisteAluminium section piste (18×1.5MTR.) Made from sections of rolled aluminum which are bolted together; |
| 31 | Supply SpoolSpool: springs used for rewinding the cable. Thickness: 4.8cm. Diameter of the cable coil: 31cm. Therefore the reel can wind the 20-meter cable in 20 turns. Springs are made from a special top-quality |
| 32 | Supply FOIL BLADERectangular blade tempered and annealed, low carbon steel or maraging steel 88cm blade with complete wired |
| 33 | Supply Epee Blade3 sided v shaped blade temperd and annealed low carbon steel or margining steel 90 cm blade with complete wired |
| 34 | Supply Sabre bladeV shaped blade temperd and annealed low carbon steel or marging steel 88cm blade |
| 35 | Supply FIE Foil BladeRectangular blade tempered and annealed, low carbon steel or maraging steel 88cm blade with complete wired with FIE stamped |
| 36 | Supply FIE Epee blade3 sided v shaped blade temperd and annealed low carbon steel or margining steel 90 cm blade with complete wired with FIE stamped |
| 37 | Supply FIE sabre bladeV shaped blade temperd and annealed low carbon steel or marging steel 88cm bladewith FIE stamped |
| 38 | Supply Coach JacketLesson jacket made of washable lather or synthetic matereial with padding made of velour lather 10mm foam padding. |
| 39 | Supply Coach maskAs per Fie standard |
| 40 | Supply Coach gloveLesson black glove with extra padding |
| 41 | Supply Weight testingFor Epee and foil 500+250 =750 gm made from stainless steel |
| 42 | Supply GaugetestingAs per FIE standard for testing of gaugeepee foil blade tip |
| 43 | Supply Sabre mask FIEAs per FIE standard with FIE stamp |
| 44 | Supply Foil mask FIEAs per FIE standard with FIE stamp |
| 45 | Supply Epee Mask FIEAs per FIE standard with FIE stamp |
| 46 | STIHL BR 600 GASOLINE BAKCPACK BLOWER, 42820111611 BY MOGLI |
| 47 | Providing & PlacingMirrorSaint Gobin Black bathroom or toilet mirror 6 ShapeSaint GobinR(Mirror) Overall Width (mm)1220Overall Height (mm)2500Mirror Thickness (mm)6FrameWithFrame MaterialwoodenbackframeFrame Width (mm)14Frame Thickness (mm)14Mirror Backside SupportYesFixing ArrangementHanging SystemGrinding of Mirror EdgesYesGlass Sheet for MirrorFlat Tranparent Sheet Glass of Quality AA/SSQ Conforming to IS 2835/1987 Mirror CoatingSilver coating which shall be protected by Copper coating and Copper coating shall be protected by a paint coatin |
| 48 | Providing & PlacingOffice tablePREMIER MODULAR TABLE L X D & H 1500 millimeter X 750 millimeter 800 millimeter Length of Table Top ±10(mm)1500 millimeterDepth of Table Top±10(mm)750 millimeterHeight of Table Top±10(mm)800 millimeterMode of Supply of modular tableKnocked Down to be assembled at consignee site by the SellerStorage Providedone sideNumber of storage unitsingle storageTable Top material and thickness ±3mm25mm thickness Flat single layer MDF board of Grade SBG II of IS 12406 LatestWarranty period in number of years4 |
| 49 | Providing & PlacingOffice AlmirahWOODEN ALMIRAHWALTERR(WALTER-1650) Material of ConstructionISI Marked, single layer MDF Board conforming to Grade SBG II of IS 12406/2003 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back sideNumber of Shelves (Nos)3Number of Doors (Nos)2Height in mm (±10 mm)1650Depth in mm (±5 mm)450Width in mm (±10 mm)760Thickness of Top in mm (±2 mm)18Thickness of Sides in mm (±1 mm)18Thickness of Back in mm (±1 mm)12Thickness of Bottom in mm (±1 mm)12Thickness of shelf in mm (±1 mm)18Thickness of Door in mm (± 1 mm)18Type of DoorsHinged doors of equal width hung with auto closing hinges of 0 cranking overlay type |
| 50 | Providing & PlacingOFFICE CHAIROFFICE CHAIR (STAFF CHAIR 065)CBL OFFICE FURNITURES Pedestal BaseChrome finish with 5 wheelsArm Materialpu foam bonded chrome cotedseat materialPU Foam Covered With pure leatherMaterial of Fabric Back Cover / Material for BackrestLeatheriteMaterial of Fabric of Seat CoverleatheriteChair TypeTorsion Bar mechanism with single point lockingHeight Adjustment ± 5(mm)up to 100 mmArmWithType of backrest supportbackrest symmetrical lumber supportArm TypeFixedErgonomic Seat DesignYesBack typefixedSeat typefixedLumber supportexternal & fixedOverall Chair Height ±15mm1180Backrest Height ±15mm730 millimeterBackrest Width ±10mm520 millimeterSeat Height ±15 mm480Seat Width ±10 mm500Seat Depth ±10 mm480 millimeterThickness of MS Plate Joining the under structure with Seat2 millimeterThickness of Plywood used in Seat ±1(mm)12 mmThickness of Plywood used in Backrest ± 1(mm)12 mmThickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm)35 mmThickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM)35 mm |
| 51 | Providing & PlacingOFFICE CHAIRML Office Solution brown 3 Number any other wood of minimum 25 mm thicknessLength of Three Seater Units in mm (±10 mm)1750Depth of Sofa Units in mm (±10 mm)900Sofa Height (Without Back Cushion) ±5 (mm)450 millimeterSofa Height (With Back Cushion) ±5 mm800 millimeterSeat Cushion Length ±5 (mm)1700Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)100Backrest Cushion Length ±5 (mm)1450Backrest Cushion Width ±5 (mm)508Number of Three Seater Units (Nos)1Frame CoveringPartially UpholsteredBackrest Cushion MaterialfoamDensity of Cushion of Backrest Material (Kg/Cubic M)28Covering Material for Seat and BackrestLeatherite MaterialFrame Structure Material and size (±1 mm)any other wood of minimum 25 mm thicknessSeat Cusion MaterialfoamDensity of Cushion of Seat Material ±3 (Kg/Cubic M)35Type of Spring in the Base / Seatingweb suspensionDimensionLength of Three Seater Units in mm (±10 mm)1750Length of Four Seater Units in mm (±10 mm)N.ADepth of Sofa Units in mm (±10 mm)900Sofa Height (Without Back Cushion) ±5 (mm)450 millimeterSofa Height (With Back Cushion) ±5 mm800 millimeterArm Width ±5 (mm)100 millimeterArm Height ±5 (mm)550 millimeterSeat Height (With Seat Cushion) ±5 (mm)450 millimeterSofa Leg Height ±2(mm)150 millimeterSofa Leg Width / Diameter ±2 (mm)25 millimeterSeat Cushion Length ±5 (mm)1700Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)100Backrest Cushion Length ±5 (mm)1450Backrest Cushion Width ±5 (mm)508Backrest Cushion Thickness ±3 (mm)60Thickness of Foam in arms ±2 (mm)N.AThickness of Foam in back ±2 (mm)50 millimeterThickness of Foam in front ±2 (mm)15 millimeterThickness of Foam in sides ±2 (mm)10 millimeterColour & FinishColour of Polish on exposed Wood framedark brownColour of Covering Materialbrown |
| 52 | Providing & PlacingChairSEATING CHAIR Type of material (other then wood) used in Polythene cane Chairhot pressed boardMaterial of Fabric Back Coverleather foamFrame MaterialCRCA ERW round pipeMaterial of Fabric of Seat CoverfabricThickness of Plywood used in Seat ±1(mm)12 mmGSM/Thickness of Fabric ±5 (Gram per Sq Meter)80 Gram per Sq MeterArm MaterialCRCA pipeThickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm)25 mmThickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm)15 mmChair TypeWith ArmsType of Seat and BackrestMade of Polythene caneFrame Type4 LegsCastorsWithoutSize of Material (mm)14 SWG 25 mm round pipeChair Height ±15(mm)890 mmSeat Depth ±10(mm)450 mmSeat Width ±10 (mm)470 mmSeat Height IN MM ±5(mm)430Backrest Width ±10(mm)380 mmBackrest Height ±10(mm)450 mmArm Length ±5(mm)450 mmArm Width ±2(mm)40 mmPaint Typeepoxy polyster |
| 53 | Providing & PlacingSofaNEEMAN black 5 Number MILD STEEL STRUCTURE NEEMANR (Sofa) Total Number of Seats in the Sofa Set (Nos)5Number of Single Seater Units (Nos)2Number of Two Seater Units (Nos)NO TWO SEATER UNITNumber of Three Seater Units (Nos)1Number of Four Seater Units (Nos)NO FOUR SEATER UNITSFrame CoveringFully UpholsteredSofa Set is Foldable to use as bedNoCovering Material for Seat and BackrestLeatheriteFrame Structure Material and size (±1 mm)MILD STEEL STRUCTURESeat Cusion MaterialfoamType of Spring in the Base / SeatingZig zagLength of Single Seater Units in mm (±5 mm)935Length of Two Seater Units in mm (±10 mm)N.ALength of Three Seater Units in mm (±10 mm)1980Length of Four Seater Units in mm (±10 mm)N.ADepth of Sofa Units in mm (±10 mm)760Sofa Height (Without Back Cushion) ±5 (mm)450 millimeterSofa Height (With Back Cushion) ±5 mm850 millimeterSeat Cushion Length ±5 (mm)710Seat Cushion Width ±5 (mm)510Seat Cusion Thickness ±5 (mm)175Backrest Cushion Length ±5 (mm)710Backrest Cushion Width ±5 (mm) |
| 54 | Providing & PlacingCentre Table Number of storage under to:pNo storageTop material:MarbleFrame material:Stainless steel SS 304Dimension of Top (length X Breadth) ±20mm550mmX450mmHeight of centre table ±10 mm410 millimeterThickness of top material (+/-2 mm)25 millimeterThickness of frame material (+/- 1 mm)12 millimeterWarranty period in number of years:1 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
