Construction C / O Sayunkat Bhawan At Ghanala In Tehsil Sandhole Distt. Mandi Building Portion, Water Supply, Sanitary Installation, Septic Tank
Tender Value
54.86 Lakhs
Estimated cost
Bid Submission
24 Mar 2022
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharampur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction C / O Sayunkat Bhawan At Ghanala In Tehsil Sandhole Distt. Mandi Building Portion, Water Supply, Sanitary Installation, Septic Tank
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 2 | Excavating trenches of required width for pipes, cables, etc in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 3 | Filling in plinth with sand under floors including watering ramming consolidating and dressing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 4 | Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting andproppingand centringetc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four)meters and removal of the same for insitu-reinforced concreteand plain concrete work upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 5 | In foundation,footings bases of columns etceteraand mass concrete. |
| 6 | In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platformand the like floor upto any thickness upto all floor levels. |
| 7 | In columns, pillars posts and struts square rectangular or polygonal in plan upto all floor levels. |
| 8 | In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchingcantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels |
| 9 | Vertical surfaces such as walls (any thickness) partition and the like includingattached pillasters, buttresses plinth andstring courses and the like in all floor heights. |
| 10 | Stair Casewith sloping orstepped soffits excluding landing except spiral stair upto all floor level. |
| 11 | Providing and layingin positioncement concrete of specified grade mechanically mixedcement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specificationand curing complete but excluding cost of form work in all workincluding all heights/depths including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 12 | Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-20(twenty ) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring completeall work up to plinth level excluding the cost of centering, shuttering,including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 13 | Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-20(twenty ) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring complete above plinthlevelexcluding costof centring shuttering finishing and reinforcement including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 14 | Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring complete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degreeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 15 | Providing and laying Mild steel and Medium Tensile steel bars Fe 500Dmade ofTATA Tisconsteel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete aboveplinth level upto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 16 | Providing and laying autoclaved aerated cement blocks masonry with 150mm / 230mm/300 mm thick AAC blocks in super structure above plinth level up to all floorlevel with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete a. (The payment of RCC band and reinforcement shall be made for seperately).including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five)in superstructure above plinth level upto all floor level in all shapes and sizein cement mortar 1:6 (onecement : six coarse sand) curing complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in superstructure above plinth level up to all floor levelsinCement Mortar 1:3( One cement: three coarsesand)and curing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 19 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :sixsand : Twelvegraded stone aggregate 20(Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Sixsand) and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 20 | Stone filling /Solingunder floors tightlyhand packedupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 21 | Providing and fixing of Openable Door made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanised Iron profiles throuhout the DOOR. The outer framewith reinforcement of 2 mm thickness, sash with overall size of 102 x 60 mm with reinforcement of 1.5 mm thickness.uPVC extruded (big series)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 22 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (For single glazing 4 to 6 mmincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 23 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (For double glazing 20 or 24 mmincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 24 | Providing and fixing ISI marked 35mm(Thirty five)millimeres thick flush door shutters conforming to IS :2202 (PartI) decorative type ,core of block board construction with frame Ist class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 25 | Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position.1st class sal woodincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 26 | Providing and fixing fly proof galvanised MS wire gauge shutter in Z- section with T section using wire gaugeof average width of aperture 1.4 mm (one point four millimetre) in both direction with wire of dia0.63mm ( zero point sixty three millimetre) for doors, windows and clearestory windows with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification / design.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 27 | Providing and fixing 250×16mm (Three hundred into sixteen millimetre) nominal sizeaaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.TThe rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 28 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeupto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 29 | 200x10 mm ( Two hundred into tenmillimetres) |
| 30 | 150x10 mm ( Onehundred fifty into ten millimetres) |
| 31 | 100x10 mm ( Onehundred into ten millimetres) |
| 32 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc completeupto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 33 | 125 mm ( Two hundredmillimetres) |
| 34 | 100 mm ( Onehundred millimetres) |
| 35 | 75 mm (Seventy fivemillimetre) |
| 36 | Providing and fixing 19mm thick( ninteenmilimetre) made of action teasa terramite resistant water proof MDF boardconfirming to IS no is 11406:1003 box including shelves and shutters, theback side of cupboard/cabinet of 6mm(Six milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm (twelve)millinetresthick hard wood edging. the shutters from out side shall be finished with 1mm (one) millimetresthick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 37 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of stainless steellever handles of approved quality with necessary screws etc. Complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 38 | Providing and fixing AISI-Grade stainless steel hangingtype floor door stopper ISI marked (anodic coating not less thangrade AC10 (ten) as per IS:1868) transparentand dyed to required colour and shadewith necessary screws etc. complete upto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 39 | Providing and fixing bright finishedD type pullhandlesISI marked in stainless steelwith screws etc. complete upto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 40 | Providing and fixing 19mm x19mm & 12X12mm( Ninteen into ninteen and twelve into twelve ) millimetres MS solid square bar (ballusters) withMS flat of 37.5mmx5mm (Thirty seven point five into five )millimetres size complete with a applying priming coat of red lead paint as per drawing specificationincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 41 | Providing and fixing 75mmx625mm rounded hand rails in straight lenth complete in 1st class indian teak woodincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 42 | Providing and fixing MONARD PROFILE TILES Ceiling Lay in plain Tegular edge Global white color tiles of size 600x600 mm, and 0.7 mm thick with 8 mm drop powder coated On G I frame work including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 43 | Providing and laying antiskid vitrifiedfloor tiles Ist quality of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan 600 x600x 10mm. (three hundredinto three hundred into eight milimeters)size in skirting base of cement 12 mm mortar 1:4(one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 44 | Providing and laying antiskid vitrifiedfloor tiles Ist quality of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan 4500 x 450x15mm. (three hundredinto three hundred into eight milimeters)size in skirting base of cement 12 mm mortar 1:4(one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 45 | Providing and layingCeramic floor tiles of size 300 x 600 mm of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan of 1st quality conforming to IS : 15622, ofpproved make, in all colours etc., complete floor tiles Ist quality of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan 4500 x 450x15mm. (three hundredinto three hundred into eight milimeters)size in skirting base of cement 12 mm mortar 1:4(one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 46 | Providing and laying cobble stone / local cut stone / red sand stone slab in 20mm average thick cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c preparing of nosing i/c rubbing and granite polish finish complete includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 47 | Providing and laying blackfinished Granite stone flooring of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in desgn and patterns, in landing of stair as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twenty millimetre)(average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor levelas specified and as directed by the Engineer-in-Chargeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 48 | Providing and laying 40 mm (Forty) Millimetres thick Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including, but excluding the cost of nosing of steps etc. complete upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.. |
| 49 | Providing and fixing on wall face unplasticised Rigid PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592)for rain water pipes of working pressure not less than 4.00 kg/square centimetre ( four point zero zero kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 50 | Providing and fixingon wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid uPVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion completeupto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 51 | 110mm (One hundred ten millimetres) nominal sizePVCbend |
| 52 | 110mm (One hundred ten millimetres) nominal sizePVC Shoe |
| 53 | Providing and fixing 110 mm ( one hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty intoFifty into Fifty) millimetreshard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : fourcoarse sand) and making good the wall etc. complete upto all heights completeincluding carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 54 | Steel work welded in built up sections, made of SAIL, Tisco, Rin, Jindal, Pather of(JSPL) Shyam Steelin Gratings, framed guard bars, Ladders, railings , Brackets and Similar work , including cutting, hoisting, fixing in position and applying a priming coat ofred lead paint upto all floor level in all heightscomplete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 55 | Steel work in built up tubular sections made of TATA(round, square or rectangular hollow pipes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeupto all floor level in all heights complete including entire carriage of material with in all leads , lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. . |
| 56 | 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :threesand) upto all floor levelincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 57 | 15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or roundedangles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar1:6 (One cement : sixcoarse sand) upto all floor level in all heightsand curing completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 58 | 15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or roundedangles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar1:6 (One cement : sixcoarse sand) upto all floor level in all heightsand curing completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 59 | 15mm (fifteen) millimetres Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty)millimtresin girth and finished even and smooth cement mortar1:3(One cement :threesand) upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 60 | Applying priming coat over new wood and wood based surfaces as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make after and including preparing the surface throughly cleaningoil grease, dirt ,dust and other foreign matter and sand papering and knotting with ready mixed paint brushing with white lead for primering ofNerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimar.makeupto all floor levelscompleteas directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 61 | Finishing with Deluxe Multi Surface Paint system for interior or exteriors using primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make Paintingwood work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero litres per ten square metres) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eight zero litres per ten square metres) of approved brand and manufacture including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 62 | Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (threepoint eight four kilogrameper ten square metre)of requiredshadepreparation of surface, as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make etc. completeon undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sandpapered smooth completeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 63 | Finishing withTwo or more coats applied on walls @ 1.25 ltr/10 sqm ( one desimal two five litres per ten square metres) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zerodesimal seven five litres per ten square metres) premium acrylic washable emulsion paint of approved shade of asian paint / Nerolac paint Dulux paint system for interiors and exteriors using Primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 64 | Distempering with Synthetic/Acrylicdistemper of asian paint / Nerolac of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 65 | White washing with lime on undecorated wall surfacestwo coats to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter completeupto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. .. |
| 66 | Providing and applying white cement based putty of average thickness 1 mm (one) millimetres of approved brand and manufacturer JK wall putty/ Birla white Putty make over the plastered wall surface to prepare the surface even and smooth complete upto all floor levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 67 | Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III): six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres)nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 68 | Constructing Coursed rubble hammer dressed \"U\" shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter )in cement mortar 1:6 ( OneCement : Six approved Sand) and inside plastering with cement mortar 1:3 (OneCement:Three approved Sand) including earth work and laying 10 cm(Ten Centimetre ) cement concrete in 1:5:10 (OneCement : Fiveapproved Sand : Tengradedcrushed stone aggregate) of 40 mm (Forty millimetres)nominal size and7.5 cm (seven Point Five centimetre )cement concrete 1:2:4 (OneCement : Twoapproved Sand : Fourgradedcrushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with afloating coat of neat cementcomplete as per standard designupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 69 | Providing and fixing 15(fifteen) millimetres nominal bore to external work and floor galvanised mild steel tubes ( heavy grade) made of B.S.T., Jindal (Hissar), Tata Steel Tubes Ltd., Prakash Surya tube fitting and clamps including making good the walls, ceiling and floorincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 70 | Providing and laying in trenchesgalvanised mild steel tubes 20 mm (Twenty milimeter)JINDAL(HISAR)/ TATA STEEL TUBE LTD( heavy grade )tube fittings (earth work in trenches to be measured and paid separataly)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 71 | Making connection of galvanised steel distribution branch with galvanised mild steel mian 25to 40 (Twentyfive to forty )millimetresby providing and fixing tee including cutting as threadingthe pipes completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 72 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one ) metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 73 | 1216(16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe)) |
| 74 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for coldwater supply,capable to withstand temperature up to 80°C (eighty) degree centigrate , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 75 | External work 1216(16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe)) |
| 76 | Providing and fixing :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundered eighty into four hundred forty)millimetreswith integral typefoot rests water closet squatting pan of Hindware or its Equivalent(Indian type W.C. pan ) with 100 mm (One hundred)millimetrs sand cast Iron P or S trap, 10 (Ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 77 | Providing and fixing g white vitreous china pedestal type water closet (European type W.C. pan NO.20049) with seat and lidin white shade of Perryware/ Hindware/Cera with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 78 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 79 | Providing and fixing white vitreous china flat back large no 5001or wall corner type lipped front urinal basin of 430x260x350 mm (four hundred thirty into two hundredsixty into three hundred fifty millimetres and 340x410x265 mm (Threehundred forty into four hundredteninto two hundred sixty five)millimetres sizes respectively with automatic flushing cistern in whiteshade of Jaquar/ Hindware /Cera with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :one urinal basin with 5(five) litre white P.V.C.automatic flushing cistern .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 80 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 81 | Providing and fixing 32 mm (thirty twomilimetre) dia P.V.C. waste pipeFinolax make for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 82 | Providing and fixing viterous China wash basin (510x400 mm ) (five hundred teninto four hundred millimetre)CATNo. S 2040101 In White Shade of superime qualityParryware, Hindware Sanitaryware, Neycer, Cera with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,including cutting holes & making good the same and carriage of materials within all leads and lifts complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 83 | Providing and Fixing Soap dish stainless steel CAN -1531of Jaquar complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 84 | Providing and fixing toilet paper holder JAQUAR,ESS-ESSmake C.P. brassincluding the carriage of material within all leads, liftsthrough all modes of transportation as perdirection of the Engineer-in-charge and other incidentals.The rate is includes of octroi, royality, Malkana, toll tax , GST, sale tax or other taxes imposed by the Government. |
| 85 | Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass make of Atul Modi Guard, Golden fish mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washerincluding the carriage of material within all leads, liftsthrough all modes of transportation upto all floor level as perdirection of the Engineer-in-charge and other incidentals.The rate is includes of octroi, royality, Malkana, toll tax , sale tax GSTor other taxes imposed by the Government. |
| 86 | Providing and fixing PTMT towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 600 mm ( six hundred) millimetre long towel rail width 78 mm ( seventy eight millimetre) and effective heightof88mm ( eighty eight millimetre) weight not less than190 gms (one hundred ninety grams)of Kingstone, Gem, Parko, Techno, Jal, ESS, Seiko, Modi ,JAQUAR makeincluding entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 87 | Providing and fixing100 mm(one hundred)millimetres cromium plated grating JAL, ESS-ESS of superior quality for floor, gully or nahani trap completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 88 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 89 | Providing and fixing CP brass bib tap15mm (Fifteen millimetres) dia ( Superior heavy type ) of madeJAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguarincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 90 | Providing and fixingC.P. brass bib cockof 15mm (Fifteen millimetres) dia ( Superior heavy type ) of madeJAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguarincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 91 | Providing and fixingC.P. brass stopcockof 15mm (Fifteen millimetres) dia ( Superior heavy type ) of madeJAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguarincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 92 | Providing and fixing plasticised PVC connection pipe Finolex make with brass unions 450mm ( four hundred fiftymillimetre) length 15mm (fifteen millimetre)nominal size upto all floor level. including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 93 | Providing and fixing ball valve (brass) JAL, ESS-ESS of approved quality, High or low pressure, with plastic floats complete completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 94 | 15 mm(fifteen millimetre)nominal bore |
| 95 | 20 mm(twenty millimetre)nominal bore |
| 96 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points JAQUAR, JAL-ESS or equivalent of approved quality conforming to IS:8931 completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 97 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Brass full way valve with C.I. wheel of approved quality (screwed end) :25 mm(twenty five) millimetre nominal dia completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 98 | Providing and fixing PVC water storage tank of Sintex three ayer make (I.S.I. 12701 marked tripplelayer)G.I. inlet or out let connection15mm (Fifteen) millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all floor level above ground levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 99 | 2000 (Two thousand )litres net capacity tank |
| 100 | Providing and fixing 110 mm x 75 mm (one hundred ten milimeters into seventy five millimeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. markedof self cleaning design including fixing withapproved adhesive includingcost of cutting and making goods the walls and floors etc. completeupto all floor levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 101 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes FINOLEX / SUPREME ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 102 | 75 mm (Seventy five millimetre) diametre |
| 103 | 110 mm (one hundred ten millimetre) diametre |
| 104 | 150 mm (one hundred fifty millimetre)diametre |
| 105 | Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (Three) millimetres thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 106 | 110 mm (one hundred ten millimetre) diametre |
| 107 | 150 mm (one hundred fifty millimetre)diametre |
| 108 | Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 109 | I) 110mm (one hundred ten millimetre) dia |
| 110 | II) 150mm (one hundred fifty millimetre) dia |
| 111 | Providing and fixing PVC double equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 112 | I) 110mm (one hundred ten millimetre) dia |
| 113 | Providing and fixing PVC plain bend ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 114 | Providing and fixing PVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 115 | I) 110mm (one hundred ten millimetre) dia |
| 116 | II) 150mm (one hundred fifty millimetre) dia |
| 117 | Providing and fixing PVC plain bend ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 118 | I) 110mm (one hundred ten millimetre) dia |
| 119 | Providing and fixingExhaust fan ISI marked including fixing withapproved adhesive etc. completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 120 | Providing and fixing square-mouth S.W. gully trap class SP-1(one) complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilograme) and frame to be not less than 2.70 kg (two point seven zero kilograme) as per standard design:100x100 mm (one hundred into one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 121 | Supplying fixing C.I. cover withoutframefor manhole required shape and approved quality rectangular shape455x610 mm (four hundred fifty five into six hundred ten milimetes)light duty the weight not less than 23Kg ( twenty three kilograme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 122 | Constructing With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 (seven desimal five) masonry Chamber 60x60x75 cm (Sixty into sixty into seventy five) centimetresinside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm (one hundred)millimetrestop diameter, 160 mm(one hundred sixty)millimetres bottom diameter and 180mm (one hundred eighty)millimetres deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : fourgraded stone aggregate 20mm(twenty)millimetres nominal size, i/c necessary excavation, foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm(forty)millimetres nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve) millimetres thick, finished with a floating coat of neat cement complete as per standard design :including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 123 | Constructing manhole with RCC top slab in 1:2:4 mix (One cement : twosand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : foursand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size)inside plastering 15(Fifteen) millimeters thick with cement mortar 1:3 (One cement : threesand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : twosand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 500mm (Eight hundred into Eight hundred into five hundred milimeters) deep including C.I. cover with frame (Light duty single seal : Pattern) -I 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frameto be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimeters) thick walls of brick masonry using commonburnt clay building bricks in cement mortar1:3 ( One cement : threesand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 124 | Constructing brick masonry chamber size inside dimensions 455 x 610 and 450 mm (four hundred fifty five into six hundred ten andfour hundred fifty) millimetres deep single pipe line.for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand ) C.I. Cover with frame (lightduty ) 355 x 610( three hundred fifty five into six hunderd ten) millimetresinternal diamensions total weight of cover with frame to be not less than 38 (thirty eight ) Kilogramme (weight of cover 23 (twenty three) Kilogrammeand weight of frame 15 ( Fifteen)kilogrammeR..C.C top slabe with 1:2:4 mix (onecement : two sand : fourgraded crushed stone aggregate 20 (twenty) millimetres nominal size ) foundation concrete 1:5:10 ( one cement : fivesand : tengraded crushed stone aggregate 40( Forty millimetresnominal size) inside plaster 15mm (Fifteen) millimetresthick with cement mortar 1:3 (one cement : threesand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
AI Tender Summary
Tender Timeline
Mar 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender